hapbeat-helper 0.1.4

Local daemon bridging Hapbeat Studio (web) to Hapbeat devices

hapbeat-helper

Local daemon that bridges Hapbeat Studio (Web SPA at https://devtools.hapbeat.com) to Hapbeat hardware on the local network.

The browser cannot do mDNS, UDP broadcast, or raw TCP sockets directly. hapbeat-helper runs in the background, exposes a WebSocket on ws://localhost:7703, and relays Studio requests to the devices using UDP (port 7700) and TCP (port 7701).

Studio (https://devtools.hapbeat.com)
        │  ws://localhost:7703 (JSON)
        ▼
hapbeat-helper (this daemon)
        │  UDP 7700 (PLAY / STOP / PING / streaming)
        │  TCP 7701 (config / kit deploy)
        │  mDNS (_hapbeat._udp.local.)
        ▼
   Hapbeat devices

Install

hapbeat-helper is distributed as a Python CLI that runs in its own isolated environment. The recommended installer is pipx — it puts each Python tool in a separate venv and exposes the entry point on your PATH, so you don't need to think about Python versions or dependency conflicts.

Step 1 — Install pipx (once per machine)

macOS

brew install pipx
pipx ensurepath

Windows

py -m pip install --user pipx
py -m pipx ensurepath
# Close and reopen your terminal so the new PATH takes effect.
pipx --version    # should print the version

Windows tip: if pipx is still "not recognized" after reopening the shell, use py -m pipx ... for everything below (it works identically). The bare pipx command becomes available once %APPDATA%\Python\Python3xx\Scripts is on your Path.

OneDrive / cloud-synced home directory: if your C:\Users\<you>\ is synced by OneDrive, pipx may fail with WinError 448 — untrusted mount point. Move pipx out of the synced tree by setting these environment variables (User scope) and reopening the shell:

[Environment]::SetEnvironmentVariable('PIPX_HOME',    'C:\pipx\home', 'User')
[Environment]::SetEnvironmentVariable('PIPX_BIN_DIR', 'C:\pipx\bin',  'User')

Step 2 — Install hapbeat-helper

Once pipx is on your PATH:

pipx install hapbeat-helper

That's it. hapbeat-helper will be available in any new terminal.

Local development (from a clone of this repo)

# editable install via pipx (changes in src/ are picked up live)
pipx install -e .

# or — preferred during active dev — a plain venv:
python -m venv .venv
# macOS:
.venv/bin/pip install -e ".[dev]"
.venv/bin/hapbeat-helper start
# Windows:
.venv\Scripts\pip install -e ".[dev]"
.venv\Scripts\hapbeat-helper start

Updating

pipx upgrade hapbeat-helper

If you installed editable from a clone (pipx install -e . or pip install -e ".[dev]"), updates are automatic — just git pull and restart the daemon. The Python package picks up changes in src/ on the next process start.

WS protocol mismatch? When Studio reports ERROR: unknown type: <message> in the log drawer, your helper is older than the Studio build. git pull && restart (or pipx upgrade).

Uninstalling

pipx uninstall hapbeat-helper

Run

Option A — Auto-start service (recommended)

Register hapbeat-helper as an OS-level service so it starts automatically every time you log in. After this one-time setup you never need to open a terminal again:

hapbeat-helper install-service

To check the registration state:

hapbeat-helper service-status

To remove the auto-start registration:

hapbeat-helper uninstall-service

Platform notes:

• macOS — creates ~/Library/LaunchAgents/com.hapbeat.helper.plist (launchd)
• Windows — drops a hidden VBS shim into the Startup folder (%APPDATA%\Microsoft\Windows\Start Menu\Programs\Startup\hapbeat-helper.vbs) that launches the daemon at login with no console window. stdout/stderr → %LOCALAPPDATA%\hapbeat-helper\hapbeat-helper.log

Option B — Foreground (dev / debug)

hapbeat-helper start

Then open https://devtools.hapbeat.com — Studio will connect automatically.

Press Ctrl+C to stop.

Other commands

hapbeat-helper status      # check whether a daemon is reachable on 7703
hapbeat-helper version     # print version
hapbeat-helper config show # show config path

Verify

Quick smoke test using websocat:

echo '{"type":"ping","payload":{}}' | websocat ws://localhost:7703
echo '{"type":"list_devices","payload":{}}' | websocat ws://localhost:7703

Troubleshooting

• Studio reports "Helper 未接続" — run hapbeat-helper install-service (once) or start manually with hapbeat-helper start.

• Browser cannot connect to ws://localhost:7703 from HTTPS Studio — Chrome and Edge allow this by default. Firefox requires network.websocket.allowInsecureFromHTTPS = true in about:config.

• No devices found — confirm the Hapbeat devices and this PC are on the same Wi-Fi network. Some hotspot/AP modes block UDP broadcast and mDNS.

• Port 7700 / 7703 already in use — stop any running hapbeat-manager (it owns the same ports). The two cannot run at the same time.

• Windows: pipx install fails with WinError 448 — untrusted mount point — your home directory is under OneDrive (or another reparse point). pipx finished installing the package but cannot finalize the shim under ~/.local/bin/. Either run hapbeat-helper.exe from that path directly, or relocate pipx outside the synced tree:

  [Environment]::SetEnvironmentVariable('PIPX_HOME',    'C:\pipx\home', 'User')
  [Environment]::SetEnvironmentVariable('PIPX_BIN_DIR', 'C:\pipx\bin',  'User')
  # Reopen the shell, then:
  py -m pipx ensurepath
  py -m pipx install hapbeat-helper
  

• pipx not recognized after pip install --user pipx — the user Scripts dir is not on Path yet. Run py -m pipx ensurepath and open a new terminal. As a fallback, every pipx X call also works as py -m pipx X.

ドキュメント

公式ドキュメントは https://devtools.hapbeat.com/docs/helper/ を参照してください。 インストール手順 / CLI リファレンス / セキュリティ解説などをまとめています。

License

MIT