hbkit

Recover files from Synology Hyper Backup (.hbk) archives without any Synology software.

Point it at a backup — on a local disk, an external drive, or an S3/R2 bucket mounted with rclone — browse it as a tree, and pull out what you want. Works headless on Linux and macOS, including Apple Silicon, where Synology's own Hyper Backup Explorer is awkward or unavailable.

brew install lz4          # or: sudo apt install liblz4-1
pip install hbkit

hbk /Volumes/Backup doctor              # can this archive be recovered?
hbk-tui /Volumes/Backup                 # browse and select interactively
hbk /Volumes/Backup get "/Photos/*" ~/restore

liblz4 is a runtime requirement — chunks are raw LZ4 blocks. It is present on most systems already; set HBK_LZ4 if yours lives somewhere unusual.

Why

Hyper Backup Explorer is a GUI, has no command line, ships x86-only on Linux, and gets unhappy with large archives. If your NAS died and the backup is all you have, you want something you can point at a drive, script, and trust.

hbkit reads the format directly. Every chunk it returns has been checked against the archive's own MD5 and CRC32, so it cannot silently hand you corrupt data — the worst case is a loud failure naming the file.

The TUI

⭘                          Hyper Backup Recovery                          17:11:17
 ┌──────────────────────────────────────────────────────────────┐ │
 │  search filename…  (/)                                       │ │ Selection
 └──────────────────────────────────────────────────────────────┘ │ 197,607 files
 ▼ ◪ 📁 NAS Volume 1                       4.4T   499,745         │ 625.0G  in 1 item(s)
 ├─ ▶ ☐ 📁 Archive 2022                      24.2G       358      │
 ├─ ▶ ☐ 📁 Backups                           23.5G    63,693      │ Destination
 ├─ ▶ ☐ 📁 Video Projects                     1.9T    64,473      │ ┌──────────────────────────┐
 ├─ ▶ ☐ 📁 Media Library                      1.3T    66,629      │ │ ~/restore                │
 ├─ ▼ ☑ 📁 Photo Libraries                  625.0G   197,607      │ └──────────────────────────┘
 │  ├─ ▶ ☑ 📁 Photos Library - Laptop…        28.8G    76,844     │ ⚠ needs 625.0G, only 70.3G free
 │  ├─ ▶ ☑ 📁 Photos Library - Old Backup…    19.8G    15,505     │
                                                                  │      Start recovery
 a All  n Clear  d Destination  r Recover  / Search  q Quit       │

space tick · a all · n clear · / search · d destination · r recover.

Folders show subtree size and file count. Ticking a folder takes its whole subtree; the destination panel warns before you start if the selection will not fit. Recovery shows a live progress bar, throughput, ETA and a failure log.

Commands

hbk <archive> doctor                     # probe an unknown archive, prove it's readable
hbk <archive> info                       # task name, codec, shares, encryption
hbk <archive> list [pattern]             # search the file index
hbk <archive> get <glob> <dest> [-j N]   # extract, preserving tree and mtimes
hbk <archive> verify <glob> [-j N]       # integrity-check, write nothing
hbk <archive> tui                        # same as hbk-tui

<archive> is a .hbk directory, or any drive or folder containing one — it will find it. Globs match the full archive path, which begins with the share name.

Start with doctor. It reports the layout it found and then proves the archive is readable by rebuilding a random sample of real files with full checksum verification:

              archive : /Volumes/Backup/nas_1.hbk
                 task : Daily Backup
          source host : nas
         source model : DS...
          chunk codec : lz4
  virtual_file record : 56 B
   chunk_index record : 29 B (v3)
  bucket index record : 32 B (md5+crc32)
               shares : Photos, Documents

  PASS  virtual_file layout known  (56 B)
  PASS  chunk_index layout known  (29 B)
  PASS  bucket layout known  (32 B)
  PASS  rebuilt 9 sampled files, all chunks verified  (9 ok, 0 failed)

  VERDICT: recoverable. Sampled files rebuilt byte-exact and checksum-verified.

Behaviour worth knowing

• Resumable. Correctly-sized files are skipped, so re-running a big job is cheap.
• Crash-safe. Files are written to .part and atomically renamed, so an interrupted run never leaves a truncated file that a later resume would trust.
• Layout preserved. Output goes to <dest>/<share>/<original path> with original mtimes.
• Read-only. Nothing is ever written to the archive.
• Sidecars skipped. @eaDir, @SynoEAStream and @SynoResource are Synology metadata — thumbnails and xattr streams, not your data. In one real archive they were half of all entries but under 1% of the bytes.
• Index cached per archive in ~/.cache/hbkit, rebuilt automatically when the archive changes. Browsing 1.1M files is instant after the first open.

Performance

Use -j to set worker processes (default 8). Threads do not help — extraction is GIL-bound in Python, measured flat at ~32 MB/s from 1 to 12 threads — so hbkit fans out to real processes.

Throughput is bounded by the source device, not by hbkit. On a USB spinning disk with a 92 MB/s sequential ceiling, a cold parallel run reached 58 MB/s while the disk itself sat at 49 MB/s; scattered reads across tens of thousands of bucket files never reach sequential speed. Work is ordered by locality so each worker sweeps the pool in one direction rather than several heads chasing several regions.

Media does not compress — measured ratio 1.004 on video. The space saving in a Hyper Backup archive comes from cross-file dedup, not per-file compression, so expect bytes-off-disk to roughly equal bytes-delivered.

Scope and limits

Read this before trusting it with the only copy of anything.

• Encrypted archives are not supported. They are detected and refused, never half-decoded. If enable_data_encrypt is set, this tool will not help you.
• Proven against a limited set of archives. The reference archive is DSM 7, Hyper Backup 4.1.2, unencrypted, LZ4, single version, single pool. Older record layouts (16-byte chunk_index, 28-byte bucket records), zlib chunks and multi-version archives are implemented from disassembly but have not met a real archive of that kind. doctor exists precisely so you can find out in seconds rather than mid-restore.
• Unknown layouts are refused, not guessed. A wrong guess would mean silently wrong bytes, which is the one thing a recovery tool must never do.
• Whole-file dedup (off_virtual_file = -1, files living in Pool/file_pool) is not decoded. One file in 501,278 in the reference archive.

The format

FORMAT.md is a full specification of the on-disk format, written so you can implement a reader in any language. Every claim is tagged verified / from disassembly / inferred / unknown, and there is an explicit list of what is still undecoded.

As far as we can tell no public description of this format existed before it — searching the container magic 70 53 A8 6E returns nothing on the open web or in file-signature databases. If the tool is useless to you, the spec may not be.

It was derived two ways and cross-checked: empirically, by anchoring on a file whose bytes could be recognised and then rebuilding progressively larger files until a 674 MB video reproduced exactly across 82,313 chunks; and by reading exported C++ symbols in Synology's own HyperBackupExplorer binary, which ships with full symbols and gives exact field offsets. Where the two disagreed, the empirical result won.

Prior art

• TeamDman/teamy-hyper-backup-explorer — independent Rust implementation (MPL-2.0). Its constants agree with what we derived separately.
• mistersandman/hyperbackup_decrypt — 2016 Python 2 script, and the only public reference for the encrypted variant.

Development

git clone https://github.com/YordiLorenzo/hbkit && cd hbkit
python3 -m venv .venv && ./.venv/bin/pip install -e ".[dev]"
HBK_TEST_ARCHIVE=/path/to/backup ./.venv/bin/python -m pytest tests -v

The test suite needs a real archive — correctness is checked against the archive's own checksums and against file-format markers, so a pass means the bytes are genuinely right, not merely the right length. Tests skip cleanly when no archive is available.

Contributions especially welcome for: encrypted archives, the legacy record layouts, and Pool/file_pool. If you have an archive doctor cannot read, an issue with its output is genuinely useful.

License

MIT — see LICENSE.

Not affiliated with or endorsed by Synology. "Synology" and "Hyper Backup" are trademarks of Synology Inc., used here only to describe what this software reads.