hid-usb-relay 26.1.1

hid based usb relay package

hid_usb_relay

A Python package for controlling HID USB relay devices with an API, CLI, or desktop GUI.

Installation

Install from the repository root:

pip install hid-usb-relay

Command line entry points

Once installed, use one of the provided console scripts:

• hid-usb-relay-cli — run the command-line relay interface
• hid-usb-relay-gui — launch the Dear PyGui desktop UI
• hid-usb-relay-api — start the FastAPI server on 0.0.0.0:9400

CLI usage

hid-usb-relay-cli devices
hid-usb-relay-cli state 1
hid-usb-relay-cli status all
hid-usb-relay-cli control 1 on
hid-usb-relay-cli control all off

The CLI commands are:

• devices — list connected relay devices
• state / status — read the current relay state
• control — set a relay state to on or off

Optional device selection is supported with --relay-id:

hid-usb-relay-cli control 1 on --relay-id DEVICE_ID

API usage

Start the API server:

hid-usb-relay-api

The server listens by default on 0.0.0.0:9400.

API endpoints

Root endpoints:

• GET / — API information
• GET /health — health check and connected device count

Relay endpoints:

• GET /api/v1/devices — list connected devices
• GET /api/v1/relay/control?relay_number=1&relay_state=on — change relay state
• POST /api/v1/relay/control — change relay state with JSON payload
• GET /api/v1/relay/state?relay_number=1 — read relay state
• POST /api/v1/relay/state — read relay state with JSON payload

Example requests

curl "http://127.0.0.1:9400/health"

curl "http://127.0.0.1:9400/api/v1/devices"

curl "http://127.0.0.1:9400/api/v1/relay/control?relay_number=1&relay_state=on"

curl -X POST "http://127.0.0.1:9400/api/v1/relay/control" \
  -H "Content-Type: application/json" \
  -d '{"relay_number":"1","relay_state":"off"}'

curl "http://127.0.0.1:9400/api/v1/relay/state?relay_number=1"

curl -X POST "http://127.0.0.1:9400/api/v1/relay/state" \
  -H "Content-Type: application/json" \
  -d '{"relay_number":"1"}'

GUI usage

Run the desktop application:

hid-usb-relay-gui

This opens a simple Dear PyGui window for scanning devices, selecting a relay, and toggling relay state.

Python usage

Import the package in your own Python code:

from hid_usb_relay.usb_relay import USBRelayDevice, RelayState, RelayError, RelayService, enumerate_devices

# List devices
print(enumerate_devices())

# Read relay state
service = RelayService()
result = service.get_state(None, "1")
print(result.relay_state)

# Set relay state
result = service.set_and_get_relay_state(None, "1", "on")
print(result.relay_state)

Notes

• The package uses platform-specific executables from src/hid_usb_relay/hid_usb_relay_bin.
• If you do not install the console scripts, you can still import and use hid_usb_relay.api, hid_usb_relay.cli, and hid_usb_relay.gui directly.

Source manual

For more documentation, see the source manual.