homeassistant-enocean 0.0.10

A wrapper library to integrate EnOcean into Home Assistant

homeassistant_enocean

This is a wrapper library to integrate the EnOcean protocol into Home Assistant.

Usage

This library is specifically written for Home Assistant's EnOcean integration. You can therefore best see how to use it by viewing its source code on GitHub. The library follows these rules.

Supported EnOcean devices based on their EnOcean Equipment Profiles (EEP)

EEP	Description	Home Assistant Component(s)	Tested Device(s)
A5-02-01	Temperature Sensor Range -40 °C to +100 °C	one sensor	none (untested)
A5-02-02	Temperature Sensor Range -40 °C to +100 °C	one sensor	none (untested)
A5-02-03	Temperature Sensor Range -40 °C to +100 °C	one sensor	none (untested)
A5-02-04	Temperature Sensor Range -40 °C to +100 °C	one sensor	none (untested)
A5-02-05	Temperature Sensor Range -40 °C to +100 °C	one sensor	none (untested)
A5-02-06	Temperature Sensor Range -40 °C to +100 °C	one sensor	none (untested)
A5-02-07	Temperature Sensor Range -40 °C to +100 °C	one sensor	none (untested)
A5-02-08	Temperature Sensor Range -40 °C to +100 °C	one sensor	none (untested)
A5-02-09	Temperature Sensor Range -40 °C to +100 °C	one sensor	none (untested)
A5-02-0A	Temperature Sensor Range -40 °C to +100 °C	one sensor	none (untested)
A5-02-0B	Temperature Sensor Range -40 °C to +100 °C	one sensor	none (untested)
A5-02-10	Temperature Sensor Range -60 °C to +130 °C	one sensor	none (untested)
A5-02-11	Temperature Sensor Range -60 °C to +130 °C	one sensor	none (untested)
A5-02-12	Temperature Sensor Range -60 °C to +130 °C	one sensor	none (untested)
A5-02-13	Temperature Sensor Range -60 °C to +130 °C	one sensor	none (untested)
A5-02-14	Temperature Sensor Range -60 °C to +130 °C	one sensor	none (untested)
A5-02-15	Temperature Sensor Range -60 °C to +130 °C	one sensor	none (untested)
A5-02-16	Temperature Sensor Range -60 °C to +130 °C	one sensor	none (untested)
A5-02-17	Temperature Sensor Range -60 °C to +130 °C	one sensor	none (untested)
A5-02-18	Temperature Sensor Range -60 °C to +130 °C	one sensor	none (untested)
A5-02-19	Temperature Sensor Range -60 °C to +130 °C	one sensor	none (untested)
A5-02-1A	Temperature Sensor Range -60 °C to +130 °C	one sensor	none (untested)
A5-02-1B	Temperature Sensor Range -60 °C to +130 °C	one sensor	none (untested)
A5-02-20	10 Bit Temperature Sensor Range -10°C to +41.2°C	one sensor	none (untested)
A5-02-30	10 Bit Temperature Sensor Range -40°C to +62.3°C	one sensor	none (untested)
A5-04-01	Temperature and Humidity Sensor, 0 °C to +40 °C, 0% to 100%	two sensors (temperature, humidity)	none (untested)
A5-04-02	Temperature and Humidity Sensor, -20 °C to +60 °C, 0% to 100%	two sensors (temperature, humidity)	none (untested)
A5-04-03	Temperature and Humidity Sensor, -20°C to +60°C 10bit, 0% to 100%	two sensors (temperature, humidity)	none (untested)
A5-04-04	Temperature and Humidity Sensor, -40°C to +120°C 12bit, 0% to 100%	two sensors (temperature, humidity)	none (untested)
A5-06-01	Light Sensor, Range 300lx to 60.000lx	one sensor (illuminance) and (if not Eltako), another sensor (supply voltage)	Eltako FAH65S (hence, only illuminance sensor is tested)
A5-07-03	Occupancy with Supply voltage monitor and 10-bit illumination	one binary sensor (motion_detected) and two sensors (illuminance, supply_voltage)	NodOn PIR-2-1-01
A5-08-01	Light, temperature and occupancy sensor, 0lx to 510lx, 0°C to 51°C	one binary sensor (occupancy) and one sensor (supply_voltage); for non-Eltako devices an additional binary sensor (occupancy_button) and an additional sensor (temperature)	Eltako FABH65S
A5-38-08	Gateway	one light, three diagnostic numbers (ramping_time, min_brightness, max_brightness) and two diagnostic sensors (device_properties, dimming_range)	Eltako FUD61NPN-230V
D2-01-00	Electronic Switches and Dimmers with Energy Measurement	one switch	none (untested)
D2-01-01	Electronic Switches and Dimmers with Energy Measurement	one switch	none (untested)
D2-01-02	Electronic Switches and Dimmers with Energy Measurement	one switch	none (untested)
D2-01-03	Electronic Switches and Dimmers with Energy Measurement	one switch	none (untested)
D2-01-04	Electronic Switches and Dimmers with Energy Measurement	one switch	none (untested)
D2-01-05	Electronic Switches and Dimmers with Energy Measurement	one switch	none (untested)
D2-01-06	Electronic Switches and Dimmers with Energy Measurement	one switch	none (untested)
D2-01-07	Electronic Switches and Dimmers with Energy Measurement	one switch	none (untested)
D2-01-08	Electronic Switches and Dimmers with Energy Measurement	one switch	none (untested)
D2-01-09	Electronic Switches and Dimmers with Energy Measurement	one switch	none (untested)
D2-01-0A	Electronic Switches and Dimmers with Energy Measurement	one switch	none (untested)
D2-01-0B	Electronic Switches and Dimmers with Energy Measurement	one switch	none (untested)
D2-01-0C	Electronic Switches and Dimmers with Energy Measurement	one switch	none (untested)
D2-01-0D	Electronic Switches and Dimmers with Energy Measurement	one switch	none (untested)
D2-01-0E	Electronic Switches and Dimmers with Energy Measurement	one switch	none (untested)
D2-01-0F	Electronic Switches and Dimmers with Energy Measurement	one switch	NodOn SIN-2-1-01
D2-01-10	Electronic Switches and Dimmers with Energy Measurement	two switches	none (untested)
D2-01-11	Electronic Switches and Dimmers with Energy Measurement	two switches	none (untested)
D2-01-12	Electronic Switches and Dimmers with Energy Measurement	two switches	none (untested)
D2-01-13	Electronic Switches and Dimmers with Energy Measurement	four switches	none (untested)
D2-01-14	Electronic Switches and Dimmers with Energy Measurement	eight switches	none (untested)
D2-05-00	Blinds Control for Position and Angle	one cover	NodOn SIN-2-RS-01
F6-02-01	Light and Blind Control - Application Style 2	eight binary sensors (a0, a1, b0, b1, ab0, ab1, a0b1, a1b0)	Jung ENO wall switch (2 channels)
F6-02-02	Light and Blind Control - Application Style 1	eight binary sensors (a0, a1, b0, b1, ab0, ab1, a0b1, a1b0)	Jung ENO wall switch (2 channels)
F6-10-00	Mechanical Handle - Window Handle	one sensor (up2vertical, vertical2up, down2vertical, vertical2down)	none (untested)

Each supported device has three additional diagnostic sensors:

• rssi: the received signal strength (in dBm) of the last received telegram
• telegrams_received: the number of telegrams received since last gateway start
• last_seen: timestamp of the last received telegram

Development

After cloning this repository, execute the provided scripts/setup.sh to set up the development environment.

Dependencies

This library only has one dependency, namely

• enocean4ha in version 0.71.0, which is MIT-licensed.

The reason for using this library instead of the previously used enocean library is a more extended set of supported EnOcean Equipment Profiles (EEP).

Copyright & license

Copyright 2026 Henning Kerstan

Licensed under the Apache License, Version 2.0 (the "License"). See LICENSE file for details.