homematicip 0.10.5

An API for the homematicip cloud

homematicip-rest-api

A Python 3 wrapper for the homematicIP REST API (Access Point Based) Since there is no official documentation about this API everything was done via reverse engineering. Use at your own risk.

Documentation

Documentation can be found under https://homematicip-rest-api.readthedocs.io

Installation

Just run pip3 install -U homematicip to get the package

Usage

first run hmip_generate_auth_token.py (from the command line) to get an auth token for your access point. it will generate a “config.ini” in your current directory. The scripts will look for a config.ini in 3 different locations depending on your OS. Copy the file to one of these locations so that it will be accessable for the scripts.

• General

  • current working directory

• Windows

  • %APPDATA%\homematicip-rest-api

  • %PROGRAMDATA%\homematicip-rest-api

• Linux

  • ~/.homematicip-rest-api/

  • /etc/homematicip-rest-api/

• MAC OS

  • ~/Library/Preferences/homematicip-rest-api/

  • /Library/Application Support/homematicip-rest-api/

Examples

• hmip_cli.py for list devices,groups,securityJournal; set label, turn switches on/off

• Sample Projects are under https://github.com/coreGreenberet/homematicip-samples

Implemented Stuff

• [X] generate authentication token

• [X] Read current state of the Environment

• [X] Weather

• [X] Location

• [X] Basic Informations( apversion, pinAssigned, timeZone, … )

• [X] Devices (partly)

• [X] Client

• [X] Groups

Devices:

• [X] HMIP-ASIR, HMIP-ASIR-B1 (Alarm Siren)

• [ ] HMIP-ASIR-O (Alarm Siren outdoor)

• [ ] HMIP-BBL (Blind Actuator for brand switches)

• [X] HMIP-BDT (Dimming Actuator for brand switches)

• [ ] HMIP-BRC2 (Remote Control for brand switches – 2 channels)

• [X] HMIP-BROLL (Shutter Actuator - brand-mount)

• [X] HMIP-BSL (Switch Actuator for brand switches – with signal lamp)

• [X] HMIP-BSM (Brand Switch and Meter)

• [X] HMIP-BWTH (Wall Thermostat with switching output – for brand switches)

• [ ] HMIP-BWTH24 (Wall Thermostat with switching output – for brand switches, 24V)

• [ ] HMIP-DBB (Doorbell Push-Button)

• [X] HMIP-eTRV, HMIP-eTRV2, HMIP-eTRV-B1 (Heating-thermostat)

• [ ] HMIP-eTRV-2-UK (not tested, but it should work)

• [ ] HMIP-eTRV-B (not tested, but it should work)

• [ ] HMIP-eTRV-C (not tested, but it should work)

• [X] HMIP-FAL230-C6 (Floor Heating Actuator – 6 channels, 230V)

• [ ] HMIP-FAL230-C10 (Floor Heating Actuator – 10 channels, 230V)

• [ ] HMIP-FAL24-C6 (Floor Heating Actuator – 6 channels, 24V)

• [ ] HMIP-FAL24-C10 (Floor Heating Actuator – 10 channels, 24V)

• [X] HMIP-FCI1 (Contact Interface flush-mount – 1 channel)

• [ ] HMIP-FCI6 (Contact Interface flush-mount – 6 channels)

• [X] HMIP-FDT (Dimming Actuator flush-mount)

• [X] HMIP-FROLL (Shutter Actuator - flush-mount)

• [X] HMIP-FSM (Homematic IP Switch Actuator and Meter – flush-mount)

• [X] HMIP-FSM16 (Homematic IP Switch Actuator and Meter 16A – flush-mount)

• [X] HMIP-KRCA (Key Ring Remote Control & alarm)

• [X] HMIP-KRC4 (Key Ring Remote Control - 4 buttons)

• [ ] HMIP-MIOB (Multi IO Box)

• [X] HMIP-MOD-OC8 (Open Collector Module)

• [ ] HMIP-MP3P (Combination Signalling Device MP3)

• [X] HMIP-PCBS (Switch Circuit Board - 1 channel)

• [ ] HMIP-PCBS2 (Switch Circuit Board - 2 channels)

• [X] HMIP-PCBS-BAT (Printed Curcuit Board Switch Battery)

• [X] HMIP-PDT (Plugable Dimmer)

• [ ] HMIP-PDT-UK (not tested, but it should work)

• [ ] HMIP-PMFS (Plugable Power Supply Monitoring)

• [X] HMIP-PS (Plugable Switch)

• [X] HMIP-PSM (Plugable Switch Measuring)

• [ ] HMIP-PSM-CH (not tested, but it should work)

• [ ] HMIP-PSM-IT (not tested, but it should work)

• [ ] HMIP-PSM-PE (not tested, but it should work)

• [ ] HMIP-PSM-UK (not tested, but it should work)

• [X] HMIP-RC8 (Remote Control - 8 buttons)

• [ ] HMIP-RCB1 (Remote Control - 1 button)

• [ ] HMIP-SAM (Acceleration Sensor)

• [X] HMIP-SLO (Light Sensor outdoor)

• [X] HMIP-SMI (Motion Detector with Brightness Sensor - indoor)

• [X] HMIP-SMI55 (Motion Detector with Brightness Sensor and Remote Control - 2-button)

• [X] HMIP-SMO, HMIP-SMO-A (Motion Detector with Brightness Sensor - outdoor)

• [X] HMIP-SPI (Precence Sensor - indoor)

• [X] HMIP-SRH (Rotary Handle Sensor)

• [X] HMIP-STH (Temperature and Humidity Sensor without display - indoor)

• [X] HMIP-STHD (Temperature and Humidity Sensor with display - indoor)

• [X] HMIP-STHO (Temperature and Humidity Sensor - outdoor)

• [X] HMIP-STHO-A (Temperature and Humidity Sensor – outdoor, anthracite)

• [X] HMIP-SWD (Water Sensor)

• [X] HMIP-SWDO (Shutter Contact)

• [X] HMIP-SWDO-I (Shutter Contact Invisible)

• [X] HMIP-SWDM (Door / Window Contact - magnetic )

• [X] HMIP-SWDM-B2 (Door / Window Contact - magnetic )

• [X] HMIP-SWO-B (Weather Sensor)

• [X] HMIP-SWO-PL (Weather Sensor – plus)

• [X] HMIP-SWO-PR (Weather Sensor – pro)

• [X] HMIP-SWSD (Smoke Detector)

• [ ] HMIP-WGC (Garage Door Button)

• [ ] HMIP-WHS2 (Switch Actuator for heating systems – 2 channels)

• [X] HMIP-WRC2 (Wall-mount Remote Control - 2-button)

• [X] HMIP-WRC6 (Wall-mount Remote Control - 6-button)

• [X] HMIP-WTH, HMIP-WTH-2 (Wall Mounted Thermostat Pro)

Events

It’s also possible to use push notifications based on a websocket connection

##initialize the api
#...
#get the home object
home = homematicip.Home()
#add a function to handle new events
home.onEvent += printEvents
#enable the event connection -> this will also start the websocket connection to the homeMaticIP Cloud
home.enable_events()


#example function to display incoming events
def printEvents(eventList):
    for event in eventList:
        print "EventType: {} Data: {}".format(event["eventType"], event["data"])

#if needed you can close the websocket connection with
home.disable_events()