husqvarna-automower-ble 1.1.2

An unofficial reverse engineered Husqvarna Automower Connect BLE library

AutoMower-BLE

This is an unofficial, reverse-engineered Husqvarna Automower Connect BLE library. It allows you to connect to and control an Automower without requiring any accounts, cloud services, or network connections.

This library was originally developed by Alistair23, but it is now being maintained and further developed. The current focus is on integrating and testing with a Gardena Sileno Minimo 250, though it should still work with other Automower models. If you are able to test it on different models, please do so and report your results.

Details on the original reverse-engineering process are available here:
Reverse Engineering Automower BLE

---

Installation

You can install this library directly from the repository:

pip install husqvarna-automower-ble

Note: This library is under active development and may not yet be available on PyPI, or the PyPI version may not be up to date.

---

Testing Connections

You can test querying data from your Automower using the following commands:

Query Mower Data

python -m husqvarna_automower_ble.mower --address D8:B6:73:40:07:37

Send Commands to the Mower

python -m husqvarna_automower_ble.mower --address D8:B6:73:40:07:37 --command park

Available Commands:

• park: Park the mower.
• pause: Pause the mower.
• override: Override the current schedule (runs for 3 hours by default).
• resume: Resume the mower's operation.

---

Contributing

If you'd like to contribute to this project, feel free to submit issues or pull requests on the GitHub repository. Testing on different Automower models is especially appreciated!

---

Disclaimer

This is an unofficial library and is not affiliated with or endorsed by Husqvarna or Gardena. Use this library at your own risk.