industrialxpl-forge 1.0.10

IndustrialXPL-Forge (IXF) — OT/ICS/SCADA/HMI/IIoT Security Assessment & Exploitation Framework. Python-First, 919+ modules, 79 MITRE ATT&CK for ICS techniques, 26 ICS malware TTPs, 50+ vendors, 50+ protocols.

IndustrialXPL-Forge (IXF)

The World's Largest OT/ICS/SCADA Security Assessment & Exploitation Framework Part of the XPL-Forge suite | Author: André Henrique (@mrhenrike) | União Geek

Python-First. Pure Python implementation — install and run with a single pip install.

---

Quick Start

pip install industrialxpl
ixf

Or from source:

git clone https://github.com/mrhenrike/IndustrialXPL-Forge
cd IndustrialXPL-Forge
pip install -r requirements.txt
python ixf.py

---

What is IXF?

IndustrialXPL-Forge is a modular, Python-native security assessment and exploitation framework for Operational Technology (OT), Industrial Control Systems (ICS), SCADA, HMI, PLC, RTU, DCS, and IIoT environments.

It covers the complete attack lifecycle:

OSINT → Discovery → Fingerprint → Vulnerability Check → Exploit → Report

Key features:

• Python-First: all core functionality works with pip install industrialxpl — external runtimes (C, Go, Java) are optional accelerators with Python fallbacks built in
• SafeMode by default: every module runs in simulate mode — prints payload without sending
• MITRE ATT&CK for ICS v19: 79 techniques mapped, ttp T0843 192.168.1.100 syntax
• CVE coverage: 3,300+ ICS/OT CVEs from CVSS 0.1 to 10.0
• 50 vendors: Siemens, Schneider, Rockwell, ABB, Honeywell, Emerson, WEG, and more
• 50 protocols: Modbus, S7comm, EtherNet/IP, DNP3, BACnet, IEC-104, OPC UA, PROFINET, and more

---

Module Catalog

Category	Modules	Description
exploits/protocols/	~50	Modbus, S7, ENIP, DNP3, BACnet, Profinet, IEC104, OPC UA
exploits/plc/	~80	Siemens, Schneider, Rockwell, GE, Beckhoff, Unitronics, ABB
exploits/scada/	~60	IGSS, RealWin, Genesis32, CoDeSys, FUXA, CitectSCADA
exploits/mes/	~25	Ignition, ThinManager, SIMATIC Historian, DELMIA Apriso
scanners/ics/	~50	Protocol-specific discovery (Modbus, S7, BACnet, DNP3...)
scanners/osint/	~8	Shodan queries, ELITEWOLF web dorks, OT Hunt
creds/	~55	Default credentials for 50+ OT/ICS vendors
cve/	3,300+	All CVE severity levels (CVSS 0.1-10.0), 3 implementation tiers
cve/apt/	~10	APT malware TTPs: FrostyGoop, Industroyer2, TRITON, INCONTROLLER
assessment/	~25	IEC 62443, NIST 800-82r3, MITRE ICS, risk scoring, IR playbook

---

Usage Examples

# Open the IXF interactive shell
ixf

# Load and run a module (simulate mode by default — safe)
ixf > use scanners/ics/modbus_detect
ixf > set target 192.168.1.100
ixf > check

# Search for modules
ixf > search siemens
ixf > search CVE-2015-5374
ixf > search modbus

# Execute a TTP-ID against a target
ixf > ttp T0843 192.168.1.100          # Program Download — all modules
ixf > ttp T0878 10.0.0.0/24            # Alarm Suppression — subnet sweep
ixf > ttp-list --tactic evasion        # List all Evasion TTP-IDs

# MITRE ATT&CK for ICS sweep
ixf > mitre-scan discovery 192.168.1.0/24
ixf > mitre-scan evasion 192.168.1.100
ixf > mitre-all 192.168.1.100          # All 79 techniques (simulate by default)
ixf > mitre-coverage                   # Show coverage % per tactic

# CVE-specific modules
ixf > cve CVE-2026-25895               # FUXA SCADA pre-auth RCE
ixf > cve CVE-2015-5374               # Siemens SIPROTEC4 DoS
ixf > cve-scan 192.168.1.0/24         # Discover assets + test all CVEs

# Generate reports
ixf > report json
ixf > mitre-report layer               # ATT&CK Navigator JSON layer

---

SafeMode / DestructiveMode

Every module defaults to simulate mode — it prints what it WOULD do without sending any packets.

ixf (FrostyGoop) > run                 # SIMULATE: prints payload, no send
ixf (FrostyGoop) > set simulate false
ixf (FrostyGoop) > set destructive true
ixf (FrostyGoop) > run                 # LIVE: shows banner + requires confirmation

Impact levels require proportional confirmation:

• INFO/READ: automatic
• LOW: simple warning
• MEDIUM: press Enter
• HIGH: type yes
• CRITICAL: type the full confirmation string
• CATASTROPHIC: type string + wait 10 seconds

All destructive operations are logged to .log/destructive_ops_YYYY-MM-DD.log.

---

Python-First Policy

Tier	Type	Examples	Required?
0	Python stdlib	socket, struct, select	Always
1	pip install	pymodbus, scapy, rich, requests	Yes
2	pip extras	asyncua, cpppo, python-can	Optional
3	External runtimes	ruby, node, java, gcc, go	Optional — Python fallback always available

All SCADA framework modules are implemented natively in Python — no additional tools required.

---

Legal Disclaimer

This tool is intended for authorized security testing, research, and educational purposes only.

Using IndustrialXPL-Forge against systems you do not own or do not have explicit written authorization to test is illegal and may violate computer fraud laws in your jurisdiction.

OT/ICS systems control critical physical infrastructure. Unauthorized use may cause:

• Physical damage to industrial equipment
• Disruption of essential services (power, water, gas, manufacturing)
• Personal injury or death
• Significant legal penalties

The authors and União Geek assume no liability for misuse. Users bear full legal and ethical responsibility for all actions performed with this tool.

---

Author & Credits

Author: André Henrique (@mrhenrike) | União Geek

Module sources: EmbedXPL-Forge (suite sibling), ISF/ICSSploit, ModBusSploit, n-days-poc-benchmark, InduGuard, ZeronTek OT Hunt research, CISA ICS-CERT advisories, Vedere Labs OT:ICEFALL, ExploitDB ICS catalog, GitHub public PoCs.