ish — Interactive Semantic Hunt

Semantic search for code, inspired by fzf. Point ish at a directory. It parses each source file into named chunks, embeds them with a local model, and ranks them against your query. Everything runs on your machine.

Languages: Python, C and C++, Markdown, and AsciiDoc. Documentation is indexed beside the code it describes, so one query searches both.

Install

pip install interactive-semantic-hunt

Nothing in that install compiles: the default backend reaches Ollama over HTTP with the standard library. A backend that runs the model in this process is an extra — [llama] for llama.cpp, [st] for sentence-transformers.

To work on ish itself, clone it and run uv sync.

The default embedding backend is Ollama, which keeps the model resident so no run pays a model load. Start it once and pull the embedding model:

ollama serve
ollama pull nomic-embed-text

Set OLLAMA_HOST to reach a daemon elsewhere.

Two other backends need no daemon:

• --embedder llama.cpp downloads a GGUF model and loads it per run. Slower per query, faster for a first index of a large tree. Needs the [llama] extra.
• --embedder st uses sentence-transformers. Needs the [st] extra.

Use

List every chunk under a path:

ish src/

src/ish/domain/chunk.py:7-28  class  Chunk

Search for a query:

ish "parse a python file" src/

[0.71] src/ish/adapters/parser/python.py:14-31  method  PythonParser.parse

Run the interactive picker and open the selection in your editor. Type to search, up/down or ctrl+p/ctrl+n to move, enter to choose, escape to quit. Narrow without leaving the query line:

state machine transitions              every language
lang:cpp state machine transitions     the implementation
lang:yaml under:/10.System/ state      the tests that cover it
type:doc how do I configure this       the prose, not the code
type:test,doc retry backoff            the tests and what they document

Press Tab to finish a filter word. ty becomes type:, lang:cp becomes lang:cpp, and under:/s becomes under:/src/; a word with several answers grows as far as they agree and names the rest. ish-complete does the work, so any picker can call it.

lang:, under:, and type: work in the query line of every interface — the command line, the picker, Neovim, and MCP. The words are taken out before the query is embedded, so the model sees the question rather than how it was narrowed.

A language may be named however it comes to mind. c, c++, cxx, h, and hpp all mean cpp, because one parser reads them all; adoc means asciidoc, md means markdown, py means python, and yml means yaml.

type: sorts every chunk into exactly one kind. A path decides before a language does, so a YAML fixture counts as a test rather than as config:

A repository that names its trees its own way can say so, in .ish/config.toml:

type_patterns = [
  "test:/[0-9.]*(Tests|Verification)/",
  "doc:/[0-9.]*Specification/",
]

The first match wins; anything unmatched keeps the reading above.

A config beside a subtree adds to the one above it, so a tree settles only what it names and inherits the rest. Searching inside an already-indexed tree reads that tree's index and narrows the answers to the path, rather than starting a second index of the same files.

nvim $(ish -i src/)

Options

Logs go to stderr, so you can pipe stdout safely. A file that cannot be read or parsed is counted in one line; -v names them.

Use from Neovim

contrib/nvim/ish.lua is an fzf-lua picker. Copy it to lua/utils/ish.lua and bind it:

map('n', '<leader>fi', function() require('utils.ish').search() end,
    { desc = 'Semantic search (ish)' })

It reads --format grep, so the built-in previewer opens each result at its line, and prints the rank in the leftmost column. search_lang({'cpp'}), search_type({'doc'}), and search_here() narrow it, as does a lang:, type:, or under: word typed into the query.

While the index refreshes, require('utils.ish').statusline() renders a bar for a statusline — ish ███░░░░░ 38% — and an empty string when idle. It reads vim.g.ish_index_status, which the picker keeps up to date, and shows ish ✓ briefly when a refresh finishes. Nothing is reported through vim.notify: with cmdheight = 0 there is no command line to put a message in, so nvim draws one over the last screen row — the statusline itself.

The picker never blocks the editor: results are written as they arrive, so typing stays smooth however long a search takes.

contrib/nvim/ish_server.lua keeps one ish-mcp process per session. It starts on the first search and is reused after that, which cuts a keystroke from about 500 ms to about 150 ms. Copy it beside the picker.

Use from Python

from ish.interfaces.python.api import Ish

with Ish("src/") as ish:
    for chunk, score in ish.search("type:doc how to configure", limit=5):
        print(score, chunk.path, chunk.symbol)
    print(ish.status())

Ish holds the index open, so a second query costs a search rather than a process start. It offers search(), chunks(), index(), refresh_all(), and status(), and reads lang:, type:, and under: out of the query exactly as the other interfaces do.

Use from an agent

ish-mcp serves the same search over the Model Context Protocol, so an agent can query the index directly. Add it to a project with .mcp.json:

{
  "mcpServers": {
    "ish": { "command": "uv", "args": ["run", "ish-mcp"] }
  }
}

It offers search_code, list_chunks, index_status, and refresh_index. The server stays resident, so a query costs about 58 ms rather than a process start.

A call may narrow one search with lang, under, type, and limit, or write the same filters into the query text. It cannot change what is indexed — those settings come from the config file only, so no single call can shrink an index that another call depends on.

Index

The index persists in SQLite under $XDG_DATA_HOME/ish/, one file per scanned tree. A search of a parent reads the indexes below it and refreshes none — choosing one of them to write to would be wrong — so it warns and offers --refresh, which visits each tree in turn. A repeated query reuses it, so only changed files are parsed and only new text is embedded. A renamed file re-embeds nothing.

Each index records the tree it was built from, so searching a directory also searches every index below it. Index the parts of a large project separately and search the whole from its root:

ish "warm" project/docs        # index one part
ish "warm" project/firmware    # and another
ish "how is exposure set" project    # searches both

Searching a parent never rewrites an index below it. Pass --no-federate to use only the index of the exact path.

The index records where each chunk is — its path, line range, kind, and name — together with the embedding vector. It does not store the source, so it is not a second readable copy of your code. Previews are read from the file, which also means they always show the current content.

Configure

Every command-line option is also a key in the config file, under the same name. Put project settings in .ish/config.toml at the root of your repository:

embedder = "ollama"
model = "mxbai-embed-large"
limit = 10
ignore = [".git", ".venv", "build", "node_modules"]

# Regular expressions, searched against the path.
exclude = ["/vendor/", "_pb2\\.py$", "(_test|_spec)\\.py$"]

include and exclude take regular expressions rather than globs, so /vendor/ matches at any depth and alternation works. exclude wins over include.

--git is on by default, so anything a .gitignore covers stays out of the index. Pass --no-git to index it anyway.

Keep generated code out

Generated code is the one thing worth excluding by hand. It is large, it is repetitive, and nobody searches it by meaning. On one firmware tree, generated headers were 99% of the oversized C and C++ text: 10.3 MB of 10.4 MB, and the largest single definition held 2,949,177 characters. A 26 MB generated JSON register map produced 32,768 chunks and took 76 seconds to parse.

Embedding costs about one chunk per second, so that is hours of work for text no query wants.

Name the patterns in exclude:

exclude = [
    "/generated/",           # a directory that holds nothing written by hand
    "_pb2\\.py$",             # protobuf
    "\\.g\\.(c|h|cpp)$",       # a generator's own suffix
    "/build/",               # anything a build wrote
    "register_map.*\\.json$", # a generated register map
]

Two things to know:

• exclude is index scope, so it decides what is in the index. Narrowing it later does not remove what a wider run already stored; run --reindex for that.
• A pattern is a regular expression searched against the whole path, so /generated/ matches at any depth and needs no wildcards.

Check a pattern before you pay to index it. An empty query lists what the filter allows, and --no-cache keeps the trial out of the stored index:

ish "" . --no-cache | wc -l                          # everything today
ish "" . --no-cache --exclude '/generated/' | wc -l  # what the pattern leaves

If most of a tree is generated, it is usually less work to exclude the directory than to name each suffix.

--lang and --under narrow what a search returns. They never change what is indexed, so a narrowed query cannot shrink the index:

ish "how is ranking done" --lang python
ish "installation steps" --lang markdown asciidoc
ish "parse a header" --under '/include/'

User-level defaults go in ~/.config/ish/config.toml, which honors XDG_CONFIG_HOME. Later sources win:

defaults
  < ~/.config/ish/config.toml
  < .ish/config.toml            (every one from the target path upward)
  < ISH_* environment
  < command line

A flat ish.toml is still read, beside .ish/config.toml and in the user directory alike, so a file written before this keeps working. Prefer .ish/config.toml: it keeps a tree's settings beside anything else the tool leaves there.

Every config file from the target path upward applies, outermost first, and each settles only the keys it names. So a file beside a subtree adds to the one above it rather than replacing it — a subtree can set git = false for itself and still inherit the type_patterns the repository above it set.

Set any option from the environment with the ISH_ prefix, for example ISH_LIMIT=20 or ISH_IGNORE=build,dist.

Develop

uv run poe check   # lint, typecheck, test

The architecture is ports and adapters. spec.md holds the requirements, and .claude/CLAUDE.md describes the layers and the composition root.