introspection-harbor

Harbor installed-agent adapter for Introspection Recipes. Install it through introspection setup --target harbor, then run a task through:

introspection eval run --runner harbor --path evals/refund-task

Select an inherited Recipe agent variant by its declared YAML name:

introspection eval run --runner harbor --path evals/refund-task --agent agent2

The selected agent YAML is the only source of the evaluated model; the CLI and adapter do not apply a separate model override.

Two adapters, one launch

introspection eval run selects introspection_harbor.agent:IntrospectionRecipeAgent; INTROSPECTION_HARBOR_ADAPTER decides which adapter that resolves to. They share base.py: the run spec, the Pi invocation with the egress-proxy extension, the captured pi.jsonl, and the ATIF trajectory. They differ only in how the Recipe and Pi reach the trial, and where the evidence comes from.

# a foreign image: bootstrap the Recipe into it
INTROSPECTION_HARBOR_ADAPTER=bootstrap introspection eval run --runner harbor --path evals/swe-task

Committed candidates through an existing Runtime

Use introspection eval run --runner harbor --runtime <slug-or-id> --commit-sha <full-pushed-sha> --path <recipe-relative-suite> --agent <name>. The CLI fetches the exact SHA from the Runtime's registered Recipe repository using the existing Git credential helper and checks it out temporarily for Harbor suite discovery. It keeps the Runtime selected by --runtime; every trial sends that Runtime ID and the candidate SHA to the Task API. Neither a local checkout nor a branch flag is required. Operator forwards --commit-sha to this same command. Committed-run results default to the invoking directory's eval-runs/ (or INTROSPECTION_EVAL_RUNS_DIR); they survive checkout cleanup. Any explicit Harbor --jobs-dir must be an absolute path outside the temporary checkout.

The Task API resolves that Runtime's trusted RuntimeSpawnContext and replaces only its Recipe commit for the eval Task. Repository, subpath, Runtime identity, bindings, resources, and image policy remain server-owned. The trial reuses the selected Runtime's published image. Runtime-agent stages the exact candidate checkout in the writable Task workspace, clears the baked Recipe directory's contents, copies the selected Recipe subpath into that existing directory, and reruns normal Recipe setup. The disposable sandbox keeps no backup of the baked source. There is no second workspace repository, manual token handling, uploaded checkout helper, candidate archive, or candidate bake. The pushed commit does not need its own Runtime-version record. A checkout, replacement, materialization, or dependency setup error is infrastructure/setup failure, not an agent regression.

Run the focused adapter checks with:

uv run python -m unittest tests.test_task_environment

These prove server-derived candidate selection, committed provenance, and the run environment without starting a platform Task or calling a model. The Harbor package must be released and installed in Operator before the production wrapper selects this adapter; the local Operator build already consumes the CLI checkout's Harbor wheel.

Operator also sets INTROSPECTION_EVAL_RUNS_DIR to its Task outputs eval-runs/ directory. The CLI writes native artifacts and run.json there directly, so their recorded paths survive detached-checkout cleanup. It must be an absolute path. introspection eval view honors the same override. Standalone CLI runs still default to Recipe-local eval-runs/; generated results are never included in committed candidate transport.

Which images the bootstrap adapter can use

The bootstrap installs a toolchain into someone else's image, and on an Introspection sandbox it does so as an ordinary user with no way to become root. That rules two shapes out, and the prerequisite step refuses them by name rather than letting a package manager fail on permissions several steps into a trial:

A refused image is not a bug to work around in the adapter — bake Node (or curl) into it, or use the runtime adapter with a Runtime image instead.

Two suites cover this. tests/test_bootstrap_shell.py runs the generated commands under sh with the probes they branch on replaced by stubs, so every shape is exercised anywhere with no container and no root. tests/test_bootstrap_docker.py runs them against the real base images as uid 1000, which is the only way to see whether the branch that runs actually works:

HARBOR_BOOTSTRAP_DOCKER=1 uv run python -m unittest tests.test_bootstrap_docker
# add HARBOR_BOOTSTRAP_DOCKER_NETWORK=1 for the cases that install from npm

Each shape can be pointed at a different image (HARBOR_IMAGE_NODE, _MUSL, _BARE, _CURL) for a network that cannot reach Docker Hub, and HARBOR_BOOTSTRAP_DOCKER_CA mounts a CA for a TLS-intercepting egress proxy. Use HARBOR_BOOTSTRAP_DOCKER_UID where a mirror image happens to grant uid 1000 ownership of its npm prefix, which a stock image does not.

Where the bootstrap adapter puts things

Everything the bootstrap installs lives under /tmp/introspection:

Not /opt/introspection, which is where the Runtime image bakes its own Recipe. A foreign image is someone else's: /opt is root-owned, the trial runs as an ordinary user, and on an Introspection sandbox pods/exec cannot run a command as anyone else — so exec_as_root is not root there and the first mkdir fails. /tmp is the one directory every image grants an arbitrary uid (mode 1777), and unlike $HOME it is there whether or not the image gave that uid a home. Only the system package install (curl, for the nvm branch) still asks for root, and it refuses by name when it does not have it.

The toolchain itself goes to $HOME: npm's global prefix moves to $HOME/.local on the system-Node branch, and nvm keeps its own prefix under $HOME/.nvm.

The Introspection environment

The adapters above choose how the agent reaches the trial. The environment chooses where the trial runs, and IntrospectionEnvironment runs it in an Introspection evaluation task:

introspection eval run --runner harbor --path evals/refund-task -- \
  --env introspection_harbor.task_environment:IntrospectionEnvironment

start creates a kind: eval task on the Recipe's Runtime, tagged harbor, with commands: true and the task's own docker-compose.yaml as its compose. Everything Harbor asks of the environment afterwards — exec, upload_file, download_file, and the healthchecks and directory helpers the base class derives from exec — becomes a row on POST /v1/tasks/{id}/commands that the task workflow runs in that sandbox.

The point of doing it on this axis: Harbor keeps the trial. The verifier runs through the same channel, in the same sandbox the agent worked in, so a task's own tests/test.sh produces the reward. The alternative — creating a platform task from an agent adapter and leaving the Harbor environment idle — reads the Recipe's judges back instead, which measures a Recipe but cannot score somebody else's benchmark. That shape was prototyped and withdrawn.

main is the agent slot and the Runtime image fills it — the agent base plus the Recipe, either baked or materialized from git — so the eval logic belongs in the Recipe repository beside the Recipe it measures. A main service therefore carries only volumes and depends_on, and a task that declares its own image: or build: there is refused by that key rather than trimmed: dropping it would run the trial in an image the task did not ask for and report the number as though it had. The same goes for an environment/Dockerfile that no sidecar builds from — for a task with no compose file at all, that is the only signal it was written for an environment that builds its own main. Every other service is a sidecar, and a sidecar may only name an image the plane produced — so a build: context is packed, uploaded and built through POST /v1/images, and an image: is mirrored, which requires it to be digest-pinned. Every task sends a compose, even one with no file of its own: Harbor's /logs and /tests sit directly under /, which the sandbox user cannot create, so they are mounted as named volumes the platform renders as emptyDir under the pod's fsGroup. _reset_dirs_user is overridden to the sandbox user for the same reason — asking for root produced a request the sandbox silently ignored and a mkdir that failed as if the trial had.

Credentials resolve as the CLI's own Data-Plane commands do: INTROSPECTION_DP_URL and INTROSPECTION_TOKEN first, then the profile introspection login wrote. Resolving the Runtime selector to a version is a Control-Plane read, so the login must have a project selected.

A browser login is not sufficient on its own. A trial needs tasks:eval to create the task, images:write to build a sidecar and tasks:exec to run a command, all of which are in the evals capability — and a CLI login carries runtimes and reviews only. Set INTROSPECTION_TOKEN to a project API key minted with both evals and runtimes: the second is not redundant, since uploading a sidecar's build context goes through the Files API and files:write is in the runtimes bundle rather than evals. With a login alone the Control-Plane resolution succeeds and the task create then 403s.

Timeouts, admission and fan-out

idle_timeout_seconds is the trial's wall-clock ceiling, not a grace period before the first command. Commands reach the sandbox through pods/exec, which the runtime agent never observes, so the idle seconds it reports climb for the whole trial however busy Harbor is. That is deliberate: it is also what releases the sandbox of a trial that has wedged. Size INTROSPECTION_HARBOR_TRIAL_TIMEOUT_SECONDS to the longest trial you expect, not to the pause before Harbor starts work.

A trial cannot exceed two hours. The plane clamps idle_timeout_seconds to the task's own timeout_seconds, and that field is not on POST /v1/tasks — it sits on the internal workflow request at a fixed 7200s — so no caller can raise it. Configuring a longer budget is refused at startup rather than accepted and halved.

Trials are admitted per org on the vqueue eval lane, so a task can sit in pending / queued / scheduled for a while before its sandbox exists. The adapter waits through those patiently and the idle clock does not start until the sandbox is running, so queueing does not eat the trial's budget. It does eat a Harbor worker slot, though: Harbor's n_concurrent_trials defaults to 4, and setting it above the org's eval_concurrency just parks the excess trials inside start. Match the two.

Directories, and which ones exist

Harbor's blessed set is EnvironmentPaths, a frozen dataclass — there is no task field for declaring extra directories, and Harbor creates these itself with mkdir inside the environment. That mkdir fails as uid 1000 against a root-owned /, so the adapter mounts them as compose named volumes, which the platform renders as emptyDir under the pod's fsGroup: 1000.

Anything else a task needs writable — /app, /srv, /data, whatever its own Dockerfile used — is the task's to declare, in the compose document it already sends:

services:
  main:
    volumes: [task-app:/app]
volumes:
  task-app:

main accepts volumes and depends_on and nothing else, and the platform mounts them on the agent container. This needs no new field anywhere.

What a volume does not give you. It is an empty writable directory, not the task image's contents. The Runtime image fills the main slot, so everything the task's own Dockerfile set up — a seeded /app, installed packages, fixture files — is absent, and mounting a volume over such a path would mask whatever the Runtime image had there. This closes "the directory does not exist and is not writable"; it does not close "the task's files are missing". A task that needs its own filesystem wants the bootstrap adapter or a Runtime built from its image.

Transfer artifacts

Uploads are staged through the Files API as raw (encryption: false) files stamped purpose: harbor_transfer. The adapter attempts best-effort deletion as soon as the sandbox has the bytes. An evals API key includes files:delete, so direct CLI orchestration can soft-delete their rows; the Operator session deliberately lacks that destructive scope, so its delete is refused and suppressed rather than turning a successful trial into a cleanup failure. No TTL or transfer-file sweep currently exists. The Files API delete does not itself erase blob bytes. Download outputs also use raw storage (metadata.encryption=false) and have the same retention limitation. This applies to Harbor's remaining test-input, prompt, replay, sidecar and result transfers; candidate Git checkout and setup do not create transfer Files.

Trial Task teardown follows the same best-effort rule. A caller holding tasks:delete releases the sandbox immediately. The Operator deliberately has no destructive scope, so its refused delete is suppressed and the Task's configured wall-clock ceiling releases the sandbox instead; that expected cleanup path does not turn a valid verifier score into completed_with_errors.

Known gaps, all of them in the command contract rather than this adapter: exec's user cannot be honoured (the sandbox runs every command as its own user, so the argument is ignored and a command that needed another user fails on its own exit code); the network policy is fixed when the pod is created, so set_network_policy mid-trial is refused; and a command row carries a bounded output tail rather than unbounded output, so a chatty command wants redirect-then-download. stop_service is the one per-service operation this adapter cannot offer — a pod's containers stop together — so sidecar evidence is collected with the agent still running, which Harbor treats as a warning.

Sidecar artifact collection and verifier collect hooks do work: service_exec and service_download_file address one compose service through the command's own service field, the directory walks are generic over that pair, and the plane refuses a service the task did not declare in its own compose. A sidecar command inherits none of the agent's workdir, user or persistent environment, as on every other compose-capable provider.

What the runtime adapter does

The trial image is the Runtime image the Data Plane published for the Recipe, so the Recipe (/opt/introspection/recipe), Pi, the Recipes extension, and the Introspection CLI are already inside it. The adapter installs nothing. Per trial it:

1. writes a pi launcher for the image's own Pi when the image has none on PATH (the Operator image already provides one);

2. uploads the Harbor instruction, or the CLI-selected replay prompt, as a prompt file and runs the baked Recipe:

   pi --recipe /opt/introspection/recipe \
     --print --mode json --approve \
     @/tmp/introspection-eval-prompt.md
   

   A production-conversation replay runs the same command through introspection local --replay-context, which creates the temporary native Pi session immediately before Pi starts;

3. captures Pi's JSON event stream as pi.jsonl under the agent log directory and converts it into trajectory.json (ATIF) with token usage, cost, and the observed model, which introspection eval run verifies against the agent YAML.

Recipe source is never uploaded or patched inside the trial. An exact-commit evaluation uses the selected Runtime version's published bake when available; its ordinary cold path otherwise materializes that version's requested SHA before this adapter runs.

E2B through scoped Data Plane egress

Operator can use E2B without receiving a real E2B, OpenAI, or Anthropic key. Configure E2B in the Data Plane's sandbox_providers; weight: 0 keeps it out of normal traffic while allowing an explicitly pinned Operator task to use it. Then select the Introspection environment class in the arguments forwarded to Harbor, naming the Runtime's published template:

introspection eval run --runner harbor --path evals/refund-task -- \
  --env introspection_harbor.environment:IntrospectionE2BEnvironment \
  --environment-kwarg "template_name=$(introspection runtimes get "$RUNTIME_ID" \
    --query image_build_metadata.external_image_name -o json | jq -r .)"

Harbor's native E2B implementation still owns preflight, sandbox creation, resources, and networking. The adapter only:

• skips Harbor's template build when template_name names a published Runtime template, and defaults the task workdir to the baked Recipe;
• copies the scoped public-egress contract (INTROSPECTION_TOKEN, INTROSPECTION_PUBLIC_EGRESS_URL as the trial's INTROSPECTION_EGRESS_URL, INTROSPECTION_ENDPOINT_HOSTS, and INTROSPECTION_RELAY_TARGET when set) into the trial through Harbor's supported persistent_env input. A template snapshot carries no session state, so this is the only way the baked Pi learns where its egress is. The Data Plane exchanges the locator for credentials at egress; model provider keys never enter the trial;
• forwards the host variables named in INTROSPECTION_HARBOR_PASSTHROUGH_ENV (comma-separated) for direct, non-egress runs such as a laptop trial with a developer's own provider key.

The platform Operator image sets INTROSPECTION_HARBOR_ENVIRONMENT=introspection_harbor.environment:IntrospectionE2BEnvironment. When the variable is set, introspection eval run supplies that environment to Harbor unless the caller explicitly passes --env or -e. Ordinary developer installs leave it unset, so the same command keeps Harbor's local Docker default.

When none of the three Introspection egress variables are set, the same class adds no egress configuration and Harbor uses E2B's normal environment and credentials. A partial egress contract is rejected rather than silently mixing direct and routed traffic.

Where this is heading

The adapter has two seams: how the Recipe is launched (run) and how the result is collected (populate_context_post_run). Today the launch executes Pi inside a Harbor-owned sandbox and the result is read back from that sandbox as pi.jsonl. A bare pi process exports no telemetry, so nothing from a trial reaches the platform's conversation store.

The intended end state keeps Harbor as the trial orchestrator but moves both seams onto the platform: the launch becomes a task on the Runtime, and the result is read from that task's conversation and judgement events, which the Runtime already exports. That removes the direct E2B dependency and the file-based verifier from the path, and a Recipe judge becomes the reward.

End-to-end MCP example

recipe-harbor-mcp-agent runs a Harbor trial in E2B against a published Runtime whose Recipe calls an authenticated MCP server. See that repository's README for the setup and the scripts/run-e2b.sh helper.