iotaudit

_{If you find this useful, you can support me by getting a SkinToScan pack, my other project. It's a one-time purchase that directly funds my open-source work.}

Is your smart pet feeder, camera or plug safe? iotaudit watches what your own IoT devices do on the network and gives each one an A-F grade, a one-line safety verdict, and a one-page HTML report. Everything runs locally: no account, no telemetry, no cloud.

It answers the questions you actually have about a cheap smart device:

• What is the short version? A one-line verdict next to the grade. Open ports, public DNS, TLS or plaintext, and destination countries are observed facts. Video, audio, and other traffic patterns stay indicators with a confidence.
• Who does it talk to? Domains (DNS + TLS SNI + HTTP Host), IPs, country, organisation. The report lists the destination countries for each device (observed fact).
• What does the traffic look like? A separate per-device indicator for video, audio, telemetry, or unknown, each with a low, medium, or high confidence. It is a pattern match, not proof of what was sent.
• Is it encrypted? Plaintext HTTP, unencrypted TCP, old TLS, or "custom" high-entropy protocols.
• What ports are open? Optional nmap scan with risk notes (telnet, RTSP, UPnP, ADB, …).
• Is it reachable from the internet? Lists the port forwards your router opened via UPnP and which device they point to (read-only, never changes the router).
• Does it phone home while idle? Idle-upload check and a traffic timeline with bursts.
• Where did the video go? LAN peer (phone P2P) vs cloud vs STUN/TURN, and an honest note when a stream was set up but never actually passed through your computer.

Status: 0.1.7. Hotspot + ARP capture, pcap and PCAPdroid analysis, IPv6/NDP, device-type identification, UPnP port-forward audit, an opt-in default-password check, grading with a one-line safety verdict, HTML report, a local web UI and the MCP server work. Offline CVE hints are on the roadmap.

Sample report

A report for a Tuya-associated pet feeder (anonymized). The one-line verdict sits beside the grade: telnet open on the LAN, public DNS, TLS cloud traffic to the US, unverified custom encryption, and a P2P video setup whose stream was not observed on this run. The longer summary is still underneath. It also shows an odd special-use "LAN peer" that is not a real device:

Open docs/sample-report.html in a browser for the full version.

Demo

A short walk-through of a capture, the UPnP port-forward check and the opt-in default-password check (animated SVG, no audio, no tracking):

Install

pipx install iotaudit
# or with the MCP server extra:
pip install "iotaudit[mcp]"
# latest from source:
pipx install "git+https://github.com/emirmrkaljevic/iotaudit"

Capturing needs root (sudo). The optional port scan needs nmap.

Quickstart

macOS

brew install nmap
pipx install iotaudit

# Just run it: pick your device from the list, then leave it alone (or use its app).
sudo "$(which iotaudit)" capture --mode arp --i-own-this-network

iotaudit scans your LAN, lists devices (IP, MAC, vendor; Tuya/Espressif flagged as likely IoT), and lets you pick one. It then ARP-spoofs only that device so its traffic flows through your Mac, captures for up to an hour (Ctrl+C stops early and still writes the report), and restores the ARP tables and IP-forwarding on exit. With a device picked, --watch-lan (phone P2P) and the IPv6/NDP filter are on by default.

Linux

sudo apt install nmap
pipx install iotaudit

# Same ARP flow as macOS:
sudo "$(which iotaudit)" capture --mode arp --i-own-this-network

# Or hotspot mode: your laptop becomes an AP; re-pair the device to it (needs NetworkManager).
sudo iotaudit capture --mode hotspot --iface wlan0 --ssid iotaudit --password 'choose-a-pass' \
     --device 10.42.0.50 --scan --out feeder.html

Analyse an existing capture

# from Wireshark, your router, or OpenWrt `tcpdump -w`
iotaudit analyze capture.pcap --device 192.168.1.50 --json results.json --out report.html

The report lands at ./iotaudit-report.html with a matching .json next to it.

IPv6, P2P video, and "not observed"

Live video from a camera or feeder often does not go to the cloud: it goes directly to your phone over the local Wi-Fi (P2P), after a short STUN/TURN handshake. iotaudit tries hard to see that stream (--watch-lan spoofs device↔phone, and the capture filter now includes IPv6 and NDP), but two Wi-Fi clients can talk without their traffic ever passing through your computer. because of Access-Point client isolation, a phone ignoring the spoof, or the stream riding IPv6 link-local (fe80::). When that happens the report says so honestly:

Live video set up but not observed here: the session was negotiated (STUN) but no sustained stream was captured; it most likely went straight to your phone. Not observed ≠ not happening.

For ground truth, capture at the router instead. --ipv6-ndp (experimental) also NDP-spoofs IPv6 link-local pairs.

Default-password check (opt-in)

iotaudit credcheck 192.168.0.50                 # telnet by default
iotaudit credcheck 192.168.0.50 --service telnet --service http

The one active login iotaudit makes, and only when you ask for it. It tries a short list of documented vendor default credentials (e.g. the root/xc3511 that the Mirai-era cameras shipped with), never a password wordlist. You confirm the exact IP by typing a phrase, it only targets a LAN address, it waits between attempts, stops at the first login that works, and reports just "default login accepted" or "not accepted"; it never keeps or uses the session. Use it on your own devices only.

Router port forwards (UPnP)

iotaudit upnp          # or --json

Many devices quietly ask the router to open a public port to themselves. iotaudit upnp lists every UPnP port forward and the LAN device it points to. It only sends the two read-only UPnP queries, and only to a router on a private address. It also runs after each capture (skip with --no-upnp) and adds a finding when a forward points at the audited device. If nothing answers, UPnP is off on your router, which is the safest setting.

Web UI and phones

iotaudit web                          # http://127.0.0.1:8765, token printed on start
sudo "$(which iotaudit)" web --lan    # also from a phone on the same Wi-Fi (token required)

View reports, upload a pcap (including PCAPdroid captures from Android) and run a one-click scan & capture from the browser. Localhost by default; --lan is opt-in, token-protected and only answers private-range clients. iPhones can use the web UI but cannot capture on their own; see docs/phones.md for what works on Android and iOS and what does not.

MCP server

iotaudit-mcp        # exposes audit tools to a local assistant ("audit my pet feeder")

Consent & scope

iotaudit only audits your own network. It refuses non-private targets and requires --i-own-this-network (or an interactive I OWN THIS NETWORK confirmation). ARP/NDP spoofing on a network you do not own may be illegal.

Findings are indicators based on observed traffic, not proof of wrongdoing by any vendor. IP geolocation by DB-IP. MIT licensed.