jbl-ma-control 1.1.0

Python client library for the JBL MA-series (MA510/MA710/MA7100HP/MA9100HP) IP control protocol

jbl-ma-control

A pure-Python client library for the JBL MA-series AV receivers (MA510, MA710, MA7100HP, MA9100HP) over their IP control protocol.

It implements every command and option in Harman's IP control interface and commands for JBL MA510/MA710/MA7100HP/MA9100HP (document v1.7): power, input selection, volume, mute, surround decoding, equalization, room EQ, Dolby/DTS options, streaming status, IR passthrough, reboot, factory reset and more.

• No third-party runtime dependencies.
• Fully type-hinted (ships py.typed).
• Thorough error handling with a typed exception hierarchy.
• Framing layer is transport-independent and unit-tested; the client is tested end-to-end against an in-process mock AVR.

Installation

pip install jbl-ma-control

Quick start

from jbl_ma import JBLClient, InputSource, SurroundMode

# The AVR always listens on TCP port 50000.
with JBLClient("192.168.1.50") as avr:
    model = avr.initialize()          # identify ourselves; returns the Model
    print("Connected to", model.name)

    avr.power_on()
    avr.set_input_source(InputSource.HDMI1)
    avr.set_volume(35)                # 0..99
    avr.set_surround_mode(SurroundMode.ALL_STEREO)
    avr.set_bass(4)                   # dB, -12..12
    avr.unmute()

Async

For asyncio applications (including Home Assistant) use AsyncJBLClient, which exposes the same method names as coroutines:

import asyncio
from jbl_ma import AsyncJBLClient, InputSource

async def main():
    async with AsyncJBLClient("192.168.1.50") as avr:
        await avr.initialize()
        await avr.power_on()
        await avr.set_input_source(InputSource.HDMI1)
        await avr.set_volume(35)

asyncio.run(main())

Concurrent coroutines sharing one AsyncJBLClient are safe — transactions are serialized internally so request/response pairs never interleave.

Manual connection management

The client is a context manager; you can also manage the connection manually:

avr = JBLClient("192.168.1.50", connect=False)
avr.connect()
try:
    print(avr.get_volume())
finally:
    avr.close()

Protocol notes

Every transmission uses the frame format from the PDF:

Controller -> AVR : <0x23><CmdID><DataLen><Data...><0x0D>
AVR -> Controller : <0x02 0x23><CmdID><RspCode><DataLen><Data...><0x0D>

• After connecting you should call initialize() so the AVR registers this controller. It returns the connected Model.

• Call heartbeat() periodically to keep the AVR out of its auto-standby timer; initialize() works as a heartbeat too.

• reboot() is acknowledged and then the unit restarts, dropping the connection. On the MA510 (verified on hardware) it comes back up in standby rather than powered on — call power_on() afterwards if you need it on, and allow time for it to reboot before reconnecting.

• The AVR also emits unsolicited frames when its state changes from the front panel or IR remote. Pass an on_event callback to receive them:

  def on_change(frame):
      print("state change:", frame.command, frame.data)
  
  avr = JBLClient("192.168.1.50", on_event=on_change)
  

API overview

Area	Methods
System	initialize(), heartbeat(), reboot(), factory_reset(), get_software_version()
Power	get_power(), set_power(), power_on(), standby()
Display	get_display_dim(), set_display_dim()
Source	get_input_source(), set_input_source()
Volume	get_volume(), set_volume(), get_mute(), set_mute(), mute(), unmute()
Sound	get_surround_mode(), set_surround_mode(), get_dolby_audio_mode(), set_dolby_audio_mode(), get_dialog_enhanced(), set_dialog_enhanced(), get_drc(), set_drc()
EQ	get_treble(), set_treble(), get_bass(), set_bass(), get_room_eq(), set_room_eq()
Party mode	get_party_mode(), set_party_mode(), get_party_volume(), set_party_volume()
Streaming	get_streaming_state()
IR remote	send_ir()

All enums (InputSource, SurroundMode, DisplayDim, RoomEQ, DolbyAudioMode, PowerState, StreamingServer, PlayState, SoftwareModule, Model, IRCommand) and value ranges are exported from the top-level jbl_ma package.

Model availability: some options only exist on certain models (for example HDMI 5/6, Phono, party mode, DTS Neural:X and Dirac Live). The library exposes every documented value; sending one an attached model does not support results in the AVR replying with ParameterNotRecognizedError or CommandInvalidError.

Error handling

All errors derive from jbl_ma.JBLError:

from jbl_ma import JBLClient, JBLCommandError, CommandInvalidError, RoomEQ

with JBLClient("192.168.1.50") as avr:
    try:
        avr.set_room_eq(RoomEQ.DIRAC_LIVE)
    except CommandInvalidError:
        print("No room-correction filter has been uploaded yet.")
    except JBLCommandError as exc:
        print("AVR rejected the command, code", hex(exc.code))

Exception	Meaning
JBLConnectionError	Socket refused / reset / closed
JBLTimeoutError	No complete response within the timeout
JBLProtocolError	A malformed frame was sent or received
CommandNotRecognizedError	Response code 0xC1
ParameterNotRecognizedError	Response code 0xC2
CommandInvalidError	Response code 0xC3 (command invalid at this time)
InvalidDataLengthError	Response code 0xC4

Low-level framing

The jbl_ma.protocol module can encode and decode frames without any I/O, which is useful for testing or building your own transport:

from jbl_ma import encode_command, decode_responses, Command

frame = encode_command(Command.MASTER_VOLUME, b"\x28")   # set volume to 40
responses, leftover = decode_responses(b"\x02\x23\x06\x00\x01\x28\x0d")

Development

pip install -e ".[dev]"
pytest

License

MIT