jnprsr 0.0.4

jnprsr is a Parser for Juniper Configuration Files

jnprsr

jnprsr ('ʤunəpɑrsər) is a Parser for Juniper configuration files.

It is based around a Lexer and Parser built using ANTLR4 (https://www.antlr.org/). The formal grammar used in our project was intially created by the batfish (https://github.com/batfish/batfish) project.

Our tool allows to generate an Abstract Syntax Tree (AST) from a given Juniper configuration file. This AST can then be processed further. Currently, we provide the following functions:

• Pretty-Printing
• Configuration Merge
• Sub-Tree Selection

The AST generated by our implementation uses a data-type provided by the anytree (https://github.com/c0fec0de/anytree) library. You can easily process the AST generated by our implementation and use it in our own tools.

Please note: This product comes with absolutely no warranty. It is neither supported nor endorsed in any way by Juniper Networks Inc. We assume no liability for any undesired or incorrect behavior you might experience with this software. If you break your network using jnprsr, it is your responsibility and you should be ashamed of yourself for not testing your software properly.

Installation

You can install jnprsr using pip:

pip install jnprsr

You can also install directly from Git:

pip install git+https://github.com/markusju/jnprsr.git

TL;DR - What you can do with jnprsr

Pretty-Printing

It allows you to transform a configuration file looking like this

interfaces { et-0/0/0 {description "More Bandwidth!"; unit 0 {family inet{address 192.0.2.1/24;}}}}

into this

interfaces {
    et-0/0/0 {
        description "More Bandwidth!";
        unit 0 {
            family inet {
                address 192.0.2.1/24;
            }
        }
    }
}

Configuration Merge

Suppose you have this snippet

interfaces {
    et-0/0/0 {
        description "Skynet NNI";
    }
}

and this target configuration

interfaces {
    et-0/0/0 {
        unit 0 {
            family inet {
                address 192.0.2.1/24;
            } 
        }
    }
}

using jnprsr you can perform a > load merge operation on the target configuration with the snippet to generate this:

interfaces {
    et-0/0/0 {
        description "Skynet NNI";
        unit 0 {
            family inet {
                address 192.0.2.1/24;
            } 
        }
    }
}

Sub-Tree Selection

Let's say you have this configuration file:

protocols {
    bgp {
        group SKYNET-PEER {
            type external;
            peer-as 1337;
            neighbor 1.2.3.4;
        }
        group EVILCORP-PEER {
            type external;
            peer-as 1338;
            neighbor 1.2.3.5;
        }
        group UMBRELLACORP-PEER {
            type external;
            peer-as 1339;
            neighbor 1.2.3.6;
        }
    }
}

and you want to access the sub-tree of the SKYNET-PEER BGP peer-group.

Using jnprsr you can easily perform the equivalent of > show configuration protocols bgp group SKYNET-PEER:

protocols {
    bgp {
        group SKYNET-PEER {
            type external;
            peer-as 1337;
            neighbor 1.2.3.4;
        }
    }
}

Other Stuff

Since jnprsr creates an anytree object, you can easily work with the parsed configuration data. Some things you could do include, but are not limited to:

• Validation and/or Verification: Does a certain configuration element or sub-tree exist?
• Comparison: Comparing two given configurations, what nodes are different?
• Editing: Create, Remove, Change a given configuration and generate textual output from the changed tree again.

Getting Started