kaco-modbus

Read and control KACO solar inverters over SunSpec Modbus.

Built on modbus-connection. The library never opens a connection of its own: you hand it a ModbusUnit and keep ownership of the socket. It contains no Home Assistant imports.

Developed against a KACO blueplanet 8.6 TL3 INT (firmware V5.53). It is driven by SunSpec discovery rather than a fixed register map, so it should work with any KACO inverter that exposes SunSpec over Modbus TCP — KACO's whole current range is three-phase, which is what this targets. Older Powador units that speak KACO's proprietary RS485 ASCII protocol are not supported; that is a different protocol.

Install

pip install kaco-modbus

You also need a Modbus backend, chosen by you rather than by this library:

pip install "modbus-connection[tmodbus]"   # or [pymodbus]

Use

import asyncio

from modbus_connection import ModbusTcpParams
from modbus_connection.tmodbus import ModbusConnection

from kaco_modbus import KacoInverter


async def main() -> None:
    connection = ModbusConnection(ModbusTcpParams(host="192.168.0.155"))
    try:
        inverter = KacoInverter(connection.for_unit(1))
        await inverter.async_update()

        print(inverter.info.model, inverter.info.serial_number)
        print(inverter.inverter.w, "W")  # AC power, scale factor applied
        for string in inverter.strings:
            print(string.id_str, string.dcw, "W")  # per MPPT string
    finally:
        await connection.close()


asyncio.run(main())

Command line

pip install "kaco-modbus[cli]"

Two tools, for two different readers.

kaco-status — what the inverter is doing

kaco-status 192.168.0.155
kaco-status 192.168.0.155 --watch      # live, refreshing every 5 s

Plain language, real units, and a judgement on each grid reading. No SunSpec vocabulary: the operating state reads "Producing power", not MPPT.

╭────────────────────── blueplanet 8.6 TL3 INT ───────────────────────╮
│  ● Producing power                   KACO new energy · 8.60 kW rated│
│                                                                     │
│  1.18 kW  ████░░░░░░░░░░░░░░░░░░░░░░  14% of capacity                │
│                                                                     │
│  ╭─────── Solar panels ────────╮  ╭────────── Grid ──────────╮      │
│  │  String    Voltage   Power  │  │  Phase 1   230.1 V normal│      │
│  │  String 1    344 V   270 W  │  │  Frequency 50.07 Hz normal      │
│  │  String 2    537 V   460 W  │  │  Power factor 1.00       │      │
│  ╰─────────────────────────────╯  ╰──────────────────────────╯      │
│                                                                     │
│    Generated all-time    Conversion efficiency     Temperature      │
│        12.19 MWh                 98.0%                46 °C         │
╰──────────────── 8.6TL01736586 · firmware V5.53 ─────────────────────╯

It withholds numbers it cannot stand behind. Conversion efficiency is blank below 1 kW, because the inverter reports power in 10 W steps and the rounding would show a false 100 %.

kaco-query — every register, for developers

kaco-query 192.168.0.155
kaco-query 192.168.0.155 --raw     # plus an undecoded register dump

Prints the discovered SunSpec model chain and every decoded field under its real SunSpec name, with — for the ones this firmware does not implement.

Control

Writes are limited to SunSpec model 123 (immediate controls):

await inverter.async_set_power_limit(50.0)  # curtail to 50 %
await inverter.async_clear_power_limit()

Setpoints on this hardware carry a revert timeout — the inverter drops back to its default after revert_seconds unless the value is written again. See docs/quirks.md.

License

Apache-2.0