kimtape

Paper tape loader for the MOS Technology KIM-1 and its replicas. Loads, dumps and verifies programs over a serial line using the stock ROM monitor — no extra hardware, no pyserial, standard library only.

Works with the KIM-1, PAL-1, PAL-II, Micro-KIM, KIM Clone and simulators exposed on a pty.

Install

pip install git+https://github.com/anarkiwi/kimtape

Use

kimtape load  --port /dev/ttyUSB0 zp.ptp game.ptp --go 0200
kimtape dump  --port /dev/ttyUSB0 --range 0200-0774 -o game.ptp
kimtape run   --port /dev/ttyUSB0 --go 0200
kimtape probe --port /dev/ttyUSB0     # what does this board answer, and how?
kimtape term  --port /dev/ttyUSB0     # raw terminal, ^] to quit
kimtape info  game.ptp                # parse a tape without a board

Programs distributed as raw binaries, Intel HEX or S-records — fig-FORTH, xKIM, MICRO-ADE among them — convert first:

kimtape convert forth.bin --at 2000 -o forth.ptp
kimtape convert xKIM.hex -o xkim.ptp          # format read from the content

Press RS before running: the monitor sets its bit rate from the first carriage return it receives. Defaults are 1200 baud, 8N1, no flow control.

load verifies every byte by reading the range back, and retries a tape that does not match. probe reports which pacing a board needs when something is wrong; start there.

As a library:

from kimtape import Monitor, Port, Tape

port = Port("/dev/ttyUSB0", 1200)
mon = Monitor(port)
mon.sync()
mon.load(Tape("game.ptp", open("game.ptp", "rb").read()))
mon.go(0x0200)

Examples

examples/load.py fetches any catalogued program from its own archive and loads it. The catalogue is examples/programs.toml; nothing is redistributed here.

examples/load.py --list
examples/load.py microchess --port /dev/ttyUSB0    # chess in 1K, on the keypad
examples/load.py kb9 --port /dev/ttyUSB0           # Microsoft BASIC, over this terminal
examples/load.py kimventure --port /dev/ttyUSB0

Most catalogued programs talk over the same serial line you loaded them through: BASIC, FOCAL, Tiny BASIC, two chess programs, an RPN calculator, a text editor and a disassembler. See docs/kim-software.md for what else is out there, and docs/kimventure.md for the worked example in full.

Documentation

• docs/protocol.md — tape format, monitor commands, why writes are paced
• docs/hardware.md — serial wiring, TTY jumper, PAL-II switch settings
• docs/kimventure.md — the worked example, start to finish
• docs/kim-software.md — other programs worth loading
• docs/development.md — tests, the fake board, releasing

Licence

Apache 2.0. Program images are fetched at run time and are not redistributed here; they remain the property of their authors.