Klaxon

The alarm tells you that. Klaxon tells you what.

Klaxon connects a language model directly to your Wazuh 5 cluster. You ask questions in plain language; it queries the indexer, reads the schema, tests decoders, and reports what it actually found — including when it found nothing, and why.

Works with Claude Desktop, Claude Code, and local models through Ollama. Klaxon itself runs beside your cluster and talks to it directly — no third party sits between the two. Where the query results go from there is your choice of model: with a local model through Ollama, nothing leaves your network at all.

---

What you can use it for

Understand what your SIEM is actually collecting. Which fields carry data and which are mapped but always empty. How complete your normalisation is. Where a decoder is dropping information you assumed was there.

Investigate without writing queries. "Show me blocked connections by source country in the last 24 hours." "Which users logged in, and how many of those were over the network?" No query DSL, no dashboard clicking.

Debug decoders. Push a raw log line through the decoder chain and see which decoders matched, what they produced, and where the chain stopped.

Check before and after a change. Field coverage measured over a time window and over the whole datastream. When those two numbers diverge, something in your normalisation changed — a decoder fix, a new integration, a broken one.

Produce recurring reports. Findings by severity and agent, coverage per index — as fixed tools that a small local model can call reliably.

What it will not do

Klaxon is read-only with respect to your environment. It never writes to the indexer, never modifies configuration, never deletes anything, and never promotes or installs a policy. The one endpoint that is not a plain read is logtest: it submits a line to the engine's tester, which evaluates it against an existing tester session. It does not touch stored data, and it does not create or alter the policies your cluster runs on.

It has no concept of who is asking. Every request runs with the credentials in its environment, so anyone who can reach it can read everything those credentials can. Run it as wazuh-readonly, not admin.

It does not replace your dashboards, and it will not tell you what to do about what it finds.

---

Requirements

• Wazuh 5.0 or later, indexer reachable over HTTPS
• Python 3.11+
• An MCP client — Claude Desktop, Claude Code, ollmcp, Open WebUI 0.6.31+, or any other

search and schema also work against a Wazuh 4.x indexer. The other tools are 5.x-specific.

---

Setup

1. Install

python3 -m venv .venv
.venv/bin/pip install klaxon-mcp

2. Configure

Copy .env.example to .env and fill in your endpoints:

WAZUH_INDEXER_URL=https://indexer.example:9200
WAZUH_INDEXER_USER=wazuh-readonly
WAZUH_INDEXER_PASSWORD=...

Only WAZUH_INDEXER_URL is required. Add WAZUH_MANAGER_URL for the manager tool and WAZUH_ENGINE_URL for tester_sessions – see Configuration.

3. Wrap it so the credentials stay in one place:

cat > run-klaxon.sh <<'EOF'
#!/usr/bin/env bash
set -a; . "$(dirname "$0")/.env"; set +a
exec "$(dirname "$0")/.venv/bin/klaxon-mcp"
EOF
chmod +x run-klaxon.sh

4. Register with your client

Claude Desktop — ~/.config/Claude/claude_desktop_config.json on Linux, ~/Library/Application Support/Claude/ on macOS:

{
  "mcpServers": {
    "klaxon": {
      "command": "/path/to/klaxon/run-klaxon.sh"
    }
  }
}

Restart Claude Desktop completely afterwards.

Claude Code:

claude mcp add klaxon /path/to/klaxon/run-klaxon.sh

Ollama — via ollmcp:

uv tool install --upgrade ollmcp
ollmcp mcp add klaxon -- /path/to/klaxon/run-klaxon.sh
ollmcp -m qwen3:14b

---

First questions to ask

Once connected, these work as plain prompts:

Which fields under wazuh.agent. are populated in network-activity?

How many events per category in the last 24 hours?

Show me the field coverage for event.* in network-activity.

Give me the findings overview for the last 48 hours.

Run this log line through the decoder chain: (paste a raw line)

A useful first move on an unfamiliar cluster is asking for field coverage on the index you care about. It tells you what is actually there before you build a question around a field that turns out to be empty.

Using a local model

Klaxon works with local models, but the two halves of the job are not equally easy for them.

Measured with Qwen3 14B at 32k context: calling a tool with fixed parameters and running simple aggregations is reliable. Writing nested query DSL by hand is not — it tends to invent .keyword suffixes and misplace sub-aggregations.

Two things help:

Use the fixed tools. findings_overview and field_coverage need no query DSL at all. field_coverage(index=..., prefix="event.") is a parameter fill, not a construction task.

Give it the field conventions. A short system prompt prevents most failures:

You work with Klaxon against a Wazuh 5 indexer.
- Never guess field names. Call klaxon.schema first for an unfamiliar index.
- The .keyword suffix does not exist in Wazuh 5.
- Agent data is under wazuh.agent.*, rule data under wazuh.rule.*.
  The time field is @timestamp.
- For questions about a specific action, first query the available
  event.action values, then filter on them.
- Read the DIAGNOSTICS block. An empty aggregation usually means
  wrong field, not no data.

Open-ended exploration — "find anything unusual" — is where local models fall short, because "unusual" needs a baseline they do not have. Ask specific questions instead, or use a stronger model for that part.

---

Tools

Tool	What it does
search	Any OpenSearch query against any index. Raw JSON back, aggregations included.
schema	Which fields exist, and which of them actually carry data.
field_coverage	How complete each field is — in a time window and over all history.
findings_overview	Findings by severity, agent, rule title and category.
logtest	Push a log line through the decoder chain and see what matched.
manager	Read-only access to the Wazuh manager API.
detectors	List and inspect Security Analytics detectors.
tester_sessions	Which logtest environments exist — the usual cause of a failing logtest.

Full parameter reference: docs/TOOLS.md. Design rationale: ARCHITECTURE.md.

One thing worth knowing up front

Klaxon always tells you when a result is thinner than it looks. An empty aggregation, a capped result set, a query against an index that does not exist — each gets a note before the data, because in OpenSearch all three come back as a perfectly successful HTTP 200 with nothing in it.

The most common case: agent.id exists in the Wazuh 5 schema and is never populated. The real field is wazuh.agent.id. Aggregate on the wrong one and you get zero buckets, no error, no warning — a result that looks like "no data" and means "wrong field". schema and field_coverage make that visible.

---

Configuration

All configuration is environment variables, and no credential is baked into the Docker image. The one optional exception is the anonymization: block of a YAML file (KLAXON_CONFIG, default ./config.yaml) — a convenience for shipping masking rules; environment variables still take precedence over it.

Variable	Default
WAZUH_INDEXER_URL	— (required)
WAZUH_INDEXER_USER / _PASSWORD	empty
WAZUH_MANAGER_URL	empty (disables manager)
WAZUH_MANAGER_USER / _PASSWORD	empty
WAZUH_ENGINE_URL	empty (disables tester_sessions)
WAZUH_VERIFY_SSL	true (setting it false logs a warning at startup)
WAZUH_TIMEOUT	60
WAZUH_SEARCH_MAX_SIZE	100 (0 disables the cap)
WAZUH_SCHEMA_FIELD_LIMIT	200
WAZUH_SCHEMA_PROBE_BATCH	100
WAZUH_LOGTEST_SPACE	custom
WAZUH_LOGTEST_TRACE_LEVEL	ASSET_ONLY

Those are three separate endpoints: the indexer, the manager API, and the engine's own HTTP server — the last runs inside the manager container but on a different port from the manager API.

---

Anonymization for external LLM clients (GDPR)

Klaxon returns tool results to the MCP client, and the client feeds them to the chat model. When that model runs outside your network — DeepSeek cloud, Mistral API, anything that is not localhost — the results physically leave the building. The anonymization layer makes sure they leave without personal data:

[Wazuh indexer] → (tool result) → (anonymization) → [masked result] → [external LLM]

It is off by default and opt-in:

KLAXON_ANONYMIZE_EXTERNAL_LLM=true klaxon-mcp

With the switch on, tool output is masked unless the LLM endpoint is provably local. Set KLAXON_LLM_BASE_URL to a loopback address (e.g. http://localhost:11434 for Ollama) and a local model keeps receiving unchanged data; an unset endpoint is treated as external, which is the GDPR-safe failure.

How masking works. Two passes plus a gate:

1. Structured pass — values under configured fields (source.ip, user.name, wazuh.agent.name, wazuh.agent.id, host.hostname, ...) are replaced wholesale with deterministic placeholders: the same value always maps to the same placeholder. With hashing on (default) they look like [IP_abc123], [USER_def789], [HOST_xyz456], [AGENT_ghi012], [EMAIL_jkl345] (MD5 or SHA-256, first six hex digits); with hashing off they are generic labels ([IP_ADDRESS], [USERNAME], ...).
2. Text pass — IP addresses, e-mails and usernames in their log context (user=admin, Failed login for admin from 192.168.1.100) are masked anywhere in the rendered output, including free-text log lines.
3. Gate — the masked output is scanned for residuals. With the whitelist enabled (default), a response that still contains an IP or e-mail is blocked: you get a GDPR BLOCKED notice instead of the data, so no unmasked PII can reach an external model.

What is and is not guaranteed. Every value under a configured field is masked — that is structural and exact. With mask_aggregation_keys on (off by default), aggregation bucket keys whose source field is configured get the same deterministic tokens as _source — terms on related.hosts returns [HOST_…] tokens, and composite after_key stays consistent with the tokenised keys, so pagination keeps working. IP addresses, e-mails and the standard username formulations are masked in free text. A username that appears in free text in an unrecognised form is the one thing a regex cannot be certain about; treat the gate's residual scan as the guarantee that matters for the reliably detectable classes (IPs and e-mails). Review the rules by adding your own fields to KLAXON_ANONYMIZATION_MASK_FIELDS or the anonymization: block of a YAML config file (KLAXON_CONFIG, precedence env > YAML > default):

anonymization:
  enabled: true
  llm_base_url: "https://api.deepseek.com/v1"
  use_hash: true
  hash_algorithm: "md5"        # or "sha256"
  mask_fields:                 # or KLAXON_ANONYMIZATION_MASK_FIELDS
    - "source.ip"
    - "destination.ip"
    - "user.name"
    - "host.hostname"
    - "wazuh.agent.name"
    - "wazuh.agent.id"
  mask_aggregation_keys: true  # or KLAXON_ANONYMIZATION_MASK_AGGREGATION_KEYS
  whitelist_enabled: true
  log_path: "llm_prompts.log"
  log_raw: false

Audit trail. Every masked exchange is logged with a UTC timestamp to KLAXON_ANONYMIZATION_LOG (default llm_prompts.log), MASKED output only — no raw PII is persisted unless you explicitly set KLAXON_ANONYMIZATION_LOG_RAW=true (and then the log is itself a personal-data store; the server warns about that).

Compliance tooling (no Wazuh environment needed):

klaxon-mcp --anonymization-status            # enabled? for which LLM?
klaxon-mcp --anonymization-report            # GDPR compliance report (stdout)
klaxon-mcp --anonymization-report report.txt # ... or to a file
klaxon-mcp --anonymization-export export.log # anonymized log for access requests

The export drops RAW lines, so the artifact handed over for data-subject access requests (Auskunftsanfragen) contains no unmasked personal data.

In the Docker image the server runs as an unprivileged user and the working directory is not writable, so point KLAXON_ANONYMIZATION_LOG at a writable path (e.g. /tmp/llm_prompts.log) when you enable anonymization there. If the log cannot be written the masking still applies — only the audit trail is lost, and the server logs that as an error.

---

DSGVO plausibility checker

Anonymization masks what is configured; the checker is the other half — it asks "what should be configured". It reads an index's mappings, samples a few documents, classifies the fields, and proposes additions to the anonymization list, so you discover personal data you did not know you were collecting.

Three classification layers, in decreasing certainty:

1. Custom rules from gdpr_checker.custom_patterns in config.yaml — the operator's knowledge always wins over heuristics.
2. Field-name patterns: source.ip is an IP by construction, user.name a username, host.hostname / wazuh.agent.name hostnames, user.email an e-mail. No documents needed.
3. Sampled values: a few _source documents are pulled and the actual values are checked — custom.peer holding 192.168.1.100 is an IP even though the name says nothing, and a free-text field like event.original embedding Failed login for admin from 192.168.1.100 is flagged as free text carrying personal data.

Priorities follow the spec: IPs, usernames and e-mails are directly personal (high); hostnames and agent ids are indirectly personal (medium); free text embedding personal data is flagged too. Fields already in mask_fields are reported as covered, not re-suggested.

# MCP tool (run through your client)
#   gdpr_check(index="wazuh-events-v5-*", apply=true)

# CLI — the same analysis, exits after running
klaxon-mcp --gdpr-check wazuh-events-v5-* --gdpr-dry-run
klaxon-mcp --gdpr-check wazuh-events-v5-* --gdpr-auto-add   # apply without prompting
klaxon-mcp --gdpr-check --gdpr-json --gdpr-out report.json  # machine-readable

# standalone entry point (same code, same flags)
klaxon_check_gdpr --index wazuh-events-v5-* --auto-add

Without --gdpr-auto-add (or apply=true) on a TTY, each field is confirmed interactively:

Feld "user.name" (USERNAME, high) ist DSGVO-relevant. Zur Anonymisierungsliste hinzufügen? [Y/n]

--gdpr-exclude / the tool's exclude parameter skips fields (internal ones without GDPR relevance). Applying merges the fields into anonymization.mask_fields of config.yaml, appends to gdpr_check.log, and writes gdpr_compliance_report.json:

{
  "timestamp": "2026-08-08T12:59:29+00:00",
  "index": "wazuh-events-v5-*",
  "checked_fields": 42,
  "sensitive_fields_found": 3,
  "anonymization_updated": true,
  "fields_added": ["source.ip", "user.name"]
}

The report is the artifact to forward to a SIEM/log-management tool for central compliance monitoring. Note the environment precedence: if KLAXON_ANONYMIZATION_MASK_FIELDS is set it overrides the file, and the checker warns about that. The running server picks up file changes on restart.

Automatic triggers. KLAXON_GDPR_CHECK_ON_SEARCH=true makes search append a [GDPR] notice naming sensitive fields present in the hits (a cheap name scan, no extra requests). klaxon-mcp --check-gdpr-on-startup runs one check before serving — it applies only together with --gdpr-auto-add, and dry-runs otherwise.

---

Docker

docker build -t klaxon-mcp .
docker run --rm -i --env-file .env klaxon-mcp

-i is required: the server communicates over stdio.

If Wazuh runs on the Docker host itself, localhost inside the container is the container. Either add --add-host=host.docker.internal:host-gateway and use that hostname in .env, or run with --network host.

---

Running it on another machine

By default Klaxon speaks stdio and is started by your MCP client as a child process. To run it elsewhere — next to the Wazuh cluster, say – serve it over HTTP:

export WAZUH_MCP_AUTH_TOKEN=$(openssl rand -hex 32)
klaxon-mcp --transport http --host 0.0.0.0 --port 8000 \
           --allowed-host klaxon.example:8000

claude mcp add --transport http klaxon https://klaxon.example:8000/mcp \
  --header "Authorization: Bearer $WAZUH_MCP_AUTH_TOKEN"

Read this before opening the port

The tools have no concept of a caller identity. Every request is executed with the Wazuh credentials from the environment. Anyone who can open a TCP connection to that port can read your entire SIEM. Over stdio this does not arise, because the process is spawned by the client and inherits its trust boundary; a listening socket is a different proposition entirely.

Three controls, in order of importance:

1. WAZUH_MCP_AUTH_TOKEN — a shared secret required as Authorization: Bearer <token>, compared in constant time. Without it the server logs SERVING WITHOUT AUTHENTICATION at startup and serves anyone.
2. TLS — the server speaks plain HTTP. A bearer token over cleartext is a token you have published. Terminate TLS in a reverse proxy in front of it.
3. --allowed-host — DNS rebinding protection. Locked to loopback names on a loopback bind; on a public bind it uses your allowlist or warns that the protection is off.

The most defensible setup is to bind loopback and let a proxy handle TLS and authentication:

klaxon-mcp --transport http --host 127.0.0.1 --port 8000

GET /healthz is exempt from authentication for load-balancer probes.

Also worth considering: the tool output contains whatever your SIEM contains — IP addresses, usernames, hostnames, login times. All of it reaches the model you point at Klaxon. If that model is hosted elsewhere, so is the data. Under GDPR that is a processing decision, not a technical detail.

Transport options are listed in docs/TOOLS.md.

---

Open WebUI

Open WebUI talks to Klaxon over streamable HTTP and to a chat model over an OpenAI-compatible API. The two are configured separately: Klaxon is a tool server, the model is what decides to call it.

Requires Open WebUI v0.6.31 or later — that is the release that added native MCP support. Earlier versions need the mcpo proxy instead, which converts MCP to OpenAPI. You need an admin account; MCP servers cannot be added by regular users.

1. Serve Klaxon over HTTP

export WAZUH_MCP_AUTH_TOKEN=$(openssl rand -hex 32)
klaxon-mcp --transport http --host 0.0.0.0 --port 8000 \
           --allowed-host klaxon.example:8000

Read Read this before opening the port first if you have not — this is a listening socket with SIEM credentials behind it.

2. Add the model — Admin Settings → Connections → OpenAI API → +

Field	Value
API Base URL	https://api.deepseek.com/v1
API Key	your key from platform.deepseek.com

DeepSeek's API is OpenAI-compatible, so no adapter is needed. If the model list comes back empty, try the base URL without /v1. Then pick deepseek-v4-flash in the model selector — it supports tool calling, which is the part that matters here; a model without it will simply answer from nothing rather than call Klaxon.

3. Register Klaxon — Admin Settings → External Tools → + (Add Server)

Field	Value
Type	MCP (Streamable HTTP) — not OpenAPI
URL	https://klaxon.example:8000/mcp (include the path)
Auth	Bearer, key = your WAZUH_MCP_AUTH_TOKEN

Choosing OpenAPI here hangs on an infinite load rather than failing cleanly, and selecting Bearer while leaving the key empty sends an empty header and gets a flat 401 — both are easy to mistake for the server being down.

If Open WebUI runs in Docker and Klaxon is on the host, localhost inside the container is the container. Use http://host.docker.internal:8000/mcp and add --add-host=host.docker.internal:host-gateway to the Open WebUI container.

Klaxon's eight tools should now appear in the tool picker. Give the model the field-convention prompt from Using a local model as the system prompt — it prevents the same failures there as it does with Ollama.

CORS is not needed here

Open WebUI connects to MCP servers from its backend, not from your browser, so no Access-Control-Allow-Origin is involved — the host.docker.internal guidance above is the giveaway, since a browser could not resolve it. What the Open WebUI docs say about enabling CORS applies to OpenAPI "Direct Tool Servers", which are a different, browser-side feature.

Set WAZUH_MCP_CORS_ORIGINS only for a genuinely browser-based MCP client:

WAZUH_MCP_CORS_ORIGINS=https://webclient.example

Comma-separated, one entry per origin, no trailing slash. * is refused: every tool runs with the Wazuh credentials, so a wildcard would let any page a browser loads read your SIEM from that browser's network position. A granted origin is also added to the DNS rebinding allowlist, so the two checks cannot disagree.

To tell which case you are in, watch Klaxon's log while the client connects. A browser client sends an OPTIONS preflight and an Origin header; a backend client sends neither.

Where your data goes

The README says nothing leaves your network, and with Ollama or a local model that holds. A hosted API is a different arrangement: tool output contains whatever your SIEM contains — IP addresses, usernames, hostnames, login times — and all of it is sent to DeepSeek's servers to be processed. Under GDPR that is a processing decision that needs to be made deliberately, not a configuration detail. If it cannot leave, keep the model local.

---

Troubleshooting

An aggregation returns nothing but there is clearly data. Almost always the wrong field. agent.id and rule.level are mapped in Wazuh 5 but never populated; the real fields are wazuh.agent.id and wazuh.rule.level. Ask for the schema with the relevant prefix.

logtest says the environment does not exist. The logtest "environment" is a tester session, and sessions are created when a policy is imported — not derived from your decoders. They live in engine state, so a rebuilt container loses them. Use tester_sessions to see which ones exist; test usually works when custom does not.

A field shows 0 % coverage but you can see values in the documents. Some fields are mapped "index": false — event.original is one. They are stored and returned but not searchable, so exists finds nothing. field_coverage reports these as unmeasurable rather than empty.

manager returns 404 on /rules. That is correct. Wazuh 5 has no rule content type in the engine; detection moved to the OpenSearch Security Analytics plugin. Use detectors instead.

Counts stop at 10,000. OpenSearch caps hits.total unless the query sets track_total_hits: true. Klaxon flags this, and the fixed tools set it themselves.

---

Development

.venv/bin/pip install -e ".[dev]"
.venv/bin/pytest
.venv/bin/mypy

The suite covers the input guards, the diagnostics layer and the network transport, plus the acceptance criteria that do not need a live cluster.

Release history: CHANGELOG.md.

---

License

Apache-2.0 — see LICENSE.

---

Built by sec73 GmbH.

Wazuh is a registered trademark of Wazuh Inc. Klaxon is an independent project and is not affiliated with, endorsed by, or sponsored by Wazuh Inc.