Lanweave

Lanweave is a local-first, open-source toolkit for managing and observing UniFi Network controllers. It turns a controller into a small, reviewable GitOps project without requiring a cloud service.

The name is intentionally independent from the controller vendor. Lanweave is not affiliated with, endorsed by, or sponsored by Ubiquiti Inc. UniFi is a trademark of Ubiquiti Inc.

Why Lanweave?

Lanweave is aimed at operators who want a safe middle ground between clicking through a controller UI and adopting a complete infrastructure platform:

• declare networks and WLANs in YAML;
• validate locally before contacting the controller;
• inspect a deterministic, redacted plan;
• apply only after explicit confirmation;
• export a portable configuration without Wi-Fi passwords;
• capture a local, secret-redacted backup;
• expose the same read-only views to an MCP-compatible AI client.

The CLI is the primary interface. MCP is an optional read-only adapter, not a requirement and not a write path around the plan safety boundary.

Status

Lanweave 0.8.0 is the stable local drift-audit release. It preserves the local-first profile behavior, read-only Site Manager cloud adapter, DNS, firewall and guarded NAT families, and adds a documented, secret-free VPN overview plus deterministic declared-versus-live audit reports for the classic local UniFi Network API. It targets self-hosted UniFi Network applications and UniFi OS consoles; see compatibility and the apply recovery model for the exact scope, tested matrix and partial-failure behavior. The frozen public surfaces are described in contracts.

Supported resource families in this release:

• networks;
• WLANs, including references to environment-provided passwords;
• local DNS A, AAAA and CNAME records;
• local firewall zones, address groups, port groups and ordered rules;
• local NAT and port-forwarding mappings in the documented IPv4 subset;
• local VPN server and site-to-site tunnel overviews, connected peers and route dependency validation;
• secret-free drift audits with deterministic JSON reports and CI exit codes;
• local controller/site profiles with explicit target selection;
• controller health, devices and clients;
• redacted snapshots of common operational endpoints.

The 0.8.0 release adds a read-only local VPN inventory through the documented Integration API, connected VPN peers, route dependency validation, secret-free export and an explicit read_only.vpn plan observation. It also adds lanweave audit and lanweave_audit_config; see the VPN contract, audit contract and v0.8 roadmap. It does not generate profiles or keys, apply VPN changes or repair drift.

The firewall family is limited to the documented local API-key Integration API surface. See firewall, compatibility and the v0.5 roadmap for the exact support boundary.

The cloud-site-manager adapter exposes only documented read-only hosts, sites, devices and derived site health. Run lanweave capabilities before selecting a target to inspect its supported operations.

Device mutation workflows remain outside v0.8.0. NAT support is limited to the documented IPv4 subset, with explicit exposure warnings and protected ownership behavior; see NAT and the v0.6.0 roadmap.

Quick start

Requires Python 3.11+ and uv. Install the stable package from PyPI with:

uv tool install lanweave==0.8.0
lanweave --version

For a checkout and development environment:

uv sync --extra dev
uv run lanweave init
cp .env.example .env
uv run lanweave validate

See release verification for checksums, provenance and attestation verification.

Edit config/network.yaml and provide secrets only through the environment:

wlans:
  - name: Home
    ssid: Home
    network: Home
    security: wpa2
    password_env: WIFI_HOME_PASSWORD

dns:
  - name: printer.home.arpa
    type: A
    address: 192.0.2.10
    ttl_seconds: 300

Use a local API key when possible. TLS verification is enabled by default; set UNIFI_VERIFY_TLS=false only when the controller's certificate cannot be verified and the risk is understood.

Command surface

lanweave init                    # create a generic config
lanweave doctor                  # check credentials and TLS settings
lanweave doctor --check          # also perform one health request
lanweave validate                # validate YAML locally
lanweave profiles list           # list sanitized local targets
lanweave profiles validate       # validate profiles without contacting UniFi
lanweave capabilities --output json # inspect selected adapter capabilities
lanweave export --out live.yaml # export secret-free desired-state YAML
lanweave plan                    # show create/update/delete operations
lanweave plan --output json      # machine-readable, redacted plan
lanweave apply                   # interactive, explicitly confirmed apply
lanweave apply --yes             # non-interactive apply after review
lanweave apply --acknowledge-risk # authorize reviewed firewall/NAT warnings
lanweave backup                  # write a 0600 redacted local snapshot
lanweave status                  # health and device summary
lanweave clients --filter phone  # connected-client view
lanweave vpn --output json       # read-only VPN inventory and coverage
lanweave audit --output table    # compare declared and live portable state
lanweave audit --output json     # machine-readable audit report

--prune is opt-in. It never targets the controller's WAN or Default network, skips system/unknown-origin DNS policies, and requires a separate DELETE confirmation in interactive mode. Firewall and NAT changes with broad, external, privileged-port, shadowing, reorder or exposure warnings additionally require --acknowledge-risk (the legacy --acknowledge-firewall-risk alias remains accepted) or the exact interactive acknowledgement. The flag does not bypass the plan or prune confirmation. Non-interactive mutation requires --yes; there is no implicit apply. If an apply stops part-way through, review a fresh plan before retrying; see apply recovery.

MCP adapter

Install the optional dependency and run the server over local stdio:

uv sync --extra mcp
uv run lanweave-mcp

The server exposes health, devices, clients, read-only VPN inventory, a secret-free audit report, secret-free export, local validation and redacted planning, including supported NAT state through export and plans. It intentionally exposes no apply or delete tool. A desktop MCP client should launch lanweave-mcp from this checkout (or from the installed package) with the required UNIFI_* environment variables. The tool names, parameters and error codes are frozen in the MCP contract.

Configuration and credentials

Copy .env.example to .env, or export the variables in the process environment. .env is ignored by Git. API keys provide read-only access to networks, WLANs and the VPN overview through the local Integration API, plus the documented DNS policy create/update/delete endpoint. Username and password session authentication remains required for network, WLAN and supported NAT mutations.

Lanweave rejects literal WLAN passwords in YAML and refuses unresolved op://... secret-manager references. This keeps the public configuration portable and makes the secret boundary explicit.

Development

uv sync --extra dev --extra mcp
uv lock --check
uv run ruff check .
uv run ruff format --check .
uv run pytest
uv build

Unit tests use simulated HTTP responses and never need a real controller. Hardware compatibility tests must run against disposable or explicitly designated controllers. See contributing, security and the design notes.

License

Apache-2.0. See LICENSE.

Project links

• source repository;
• issues and roadmap;
• MCP and audit contracts;
• v0.2.0 profile design;
• security policy;
• contribution guide.