Installation

BANZAI uses uv for dependency management. Install uv first if you don’t have it:

curl -LsSf https://astral.sh/uv/install.sh | sh

Then install BANZAI and all dependencies including CPU-only PyTorch:

uv sync

All dependencies are managed automatically. A virtual environment is created in .venv in the project directory. Activate it before running any commands:

source .venv/bin/activate

uv pip install lco-banzai --extra-index-url https://download.pytorch.org/whl/cpu

Usage

BANZAI has a variety of console entry points:

• banzai_reduce_individual_frame: Process a single frame

• banzai_reduce_directory: Process all frames in a directory

• banzai_make_master_calibrations: Make a master calibration frame by stacking previously processed individual calibration frames.

• banzai_automate_stack_calibrations: Start the scheduler that sets when to create master calibration frames

• banzai_run_realtime_pipeline: Start the listener to detect and process incoming frames

• banzai_mark_frame_as_good: Mark a calibration frame as good in the database

• banzai_mark_frame_as_bad: Mark a calibration frame as bad in the database

• banzai_update_db: Update the instrument table by querying the ConfigDB

• banzai_add_instrument: Add an instrument to the database

• banzai_add_site: Add a site to the database

• banzai_add_super_calibration: Add a super calibration frame to the database

• banzai_populate_bpms: Automatically populate the db with bpms from the archive

• banzai_create_db: Initialize a database to be used when running the pipeline

• banzai_create_local_db: Initialize a local database for site deployment, copying site/instrument info from a remote calibration database

You can see more about the parameters the commands take by adding a –help to any command of interest.

BANZAI can be deployed in two ways: an active pipeline that processes data as it arrives or a manual pipeline that is run from the command line.

For a runnable example of BANZAI in manual pipeline mode, refer to this jupyter notebook:

The main requirement to run BANZAI is that the database has been set up. BANZAI is database type agnostic as it uses SQLAlchemy. To create a new database to run BANZAI, run

from banzai.dbs import create_db
create_db('sqlite:///banzai-test.db')

This will create an sqlite3 database file in your current directory called banzai-test.db.

To run database migrations (e.g. after upgrading BANZAI), use the Alembic migration files bundled with the package:

DB_ADDRESS=postgresql://user:pass@host/dbname alembic -c $(python -c "import importlib.resources; print(importlib.resources.files('banzai').joinpath('alembic.ini'))") upgrade head

If you are not running this at LCO, you will have to add the instrument of interest to your database by running banzai_add_instrument before you can process any data.

By default, BANZAI requires a bad pixel mask. You can create one that BANZAI can use by using the tool here. To add a local bpm to the database, run

banzai_add_super_calibration path/to/bpm/file --db-address path/to/db

Generally, you have to reduce individual bias frames first by running banzai_reduce_individual_frame command. If the processing went well, you can mark them as good in the database using banzai_mark_frame_as_good. Once you have individually processed bias frames, you can create a master calibration using banzai_make_master_calibrations. This master calibration will then be available for future reductions of other observation types. Next, similarly reduce individual dark frames and then stack them to create a master dark frame. Then, the same for skyflats. At this point, you will be able to process science images using the banzai_reduce_individual_frame command.

To run the pipeline in its active mode, you need to setup a task queue and a filename queue. See the docker-compose-local.yml file for details on this setup.

Running Locally

To run BANZAI as a local pipeline, use docker-compose-local.yml. This is the recommended setup for development and for processing data independently of LCO’s site infrastructure.

Redis and RabbitMQ are managed separately via docker-compose-dependencies.yml so they can be left running across pipeline restarts. Start them first:

docker compose -f docker-compose-dependencies.yml up -d

Pipeline containers connect via the REDIS_URL and RABBITMQ_URL environment variables (defaulting to host.docker.internal). Site deployments can point these at existing infrastructure instead.

1. Copy local-banzai-env.default to local-banzai-env and set your AUTH_TOKEN and DB_ADDRESS.

2. Start the containers:

docker compose -f docker-compose-local.yml --env-file local-banzai-env up -d --build

3. Queue images for processing. Raw files must be in $HOST_RAW_DIR:

uv run python scripts/queue_images.py $HOST_RAW_DIR

Processed output will be saved in $HOST_REDUCED_DIR.

Tests

Unit tests can be run using pytest. End-to-end tests are skipped by default, so to run only the unit tests locally run:

uv run pytest

The default pytest options exclude the e2e and e2e_site markers. The following markers are defined if you only want to run a subset of the tests:

• e2e: End-to-end tests. Skip these if you only want to run unit tests.

• master_bias: Only test making a master bias

• master_dark: Only test making a master dark, assumes master bias frame already exists

• master_flat: Only test making a master flat, assumes master bias and dark frames already exist

• science_files: Only test processing science data, assumes master bias, dark, and flat frames already exist.

The end-to-end tests run on Jenkins at LCO automatically for every pull request.

To run the end-to-end tests locally, the easiest setup uses docker-compose. In the code directory run:

export DOCKER_IMG=banzai
docker build -t $DOCKER_IMG .
docker-compose up

After all of the containers are up, run

docker exec banzai-listener pytest --pyargs banzai.tests "-m e2e"

# Copy and configure the environment file
cp banzai/tests/site_e2e/site_e2e.env.template banzai/tests/site_e2e/site_e2e.env
# Edit site_e2e.env and add your AUTH_TOKEN

# Run the tests
scripts/run_site_e2e.sh

docker compose -f docker-compose-dependencies.yml up -d
uv run pytest -m e2e_site banzai/tests/site_e2e/test_site_e2e.py -v -s

License

This project is Copyright (c) Las Cumbres Observatory and licensed under the terms of GPLv3. See the LICENSE file for more information.

Support

Create an issue