lecroy-mcp 0.1.8

MCP server for controlling LeCroy oscilloscopes via SCPI/VXI-11

lecroy-mcp

MCP server for controlling LeCroy oscilloscopes via SCPI over LAN (VXI-11) or USB.

Requirements

• uv installed
• A LeCroy oscilloscope connected over LAN or USB

MCP configuration

Add to your MCP client config (e.g. Claude Code's .mcp.json):

{
  "mcpServers": {
    "lecroy-scope": {
      "type": "stdio",
      "command": "uvx",
      "args": ["lecroy-mcp"]
    }
  }
}

uvx will automatically download and run the server — no manual installation needed.

Connection options

Option 1 — Manual connection

Copy the MCP client config from above as-is and connect from within the Claude session:

1. scope_scan — auto-detect LeCroy scopes on the local network
2. scope_list_resources — list all VISA resources (LAN + USB)
3. scope_connect("TCPIP0::192.168.1.111::inst0::INSTR") — connect directly

Optionally set LECROY_SUBNET to hint the scan range:

{
  "mcpServers": {
    "lecroy-scope": {
      "type": "stdio",
      "command": "uvx",
      "args": ["lecroy-mcp"],
      "env": {
        "LECROY_SUBNET": "192.168.1.0/24"
      }
    }
  }
}

Option 2 — Pre-configure the IP address (recommended for LAN)

Set LECROY_HOST in the env block and the server auto-connects on startup:

{
  "mcpServers": {
    "lecroy-scope": {
      ...
      "env": {
        "LECROY_HOST": "192.168.1.111"
      }
    }
  }
}

Option 3 — Pre-configure a full resource string (LAN or USB)

Use LECROY_RESOURCE for full control, including USB connections:

{
  "mcpServers": {
    "lecroy-scope": {
      ...
      "env": {
        "LECROY_RESOURCE": "USB0::0x05FF::0x1023::12345::INSTR"
      }
    }
  }
}

Usage

Once connected, you have tools for:

• Channel setup (scale, offset, coupling, bandwidth limit)
• Trigger configuration (mode, source, level, edge)
• Timebase and memory depth
• Automated measurements (PKPK, FREQ, RMS, RISE, DUTY, etc.)
• Waveform capture (JSON or CSV)
• Screenshots
• Math functions (FFT, INTG, DIFF, etc.)
• WaveSource built-in generator (WaveSurfer 3000Z and similar)

Supported models

The server detects the connected model and adjusts commands accordingly. Profiles are included for:

• WaveSurfer 3000Z / 4000HD
• HDO4000A / HDO6000B / HDO8000A
• WaveRunner 6000 / 8000
• WavePro HD
• MDA800A, SDA

Unknown models fall back to conservative defaults.

Updating

With uvx, use the @latest tag to force the newest version:

uvx lecroy-mcp@latest

Or update the args in your .mcp.json to always pull the latest:

"args": ["lecroy-mcp@latest"]

With pip:

pip install --upgrade lecroy-mcp

Manual installation

If you prefer not to use uvx:

pip install lecroy-mcp

Then use lecroy-mcp as the command in your MCP config instead of uvx lecroy-mcp.

Notes

• Requires pyvisa-py backend — NI-VISA is currently not supported (breaks screenshot capture)
• All VISA access is serialized via a threading lock; parallel MCP tool calls are safe

Troubleshooting

Diagnostic messages not appearing in MCP logs

If you are not seeing server log output (e.g. auto-connect status or errors) in your MCP client's log viewer, add PYTHONUNBUFFERED to the env block:

"env": {
  "PYTHONUNBUFFERED": "1"
}

This disables Python's output buffering so log messages are flushed immediately. It is not required for normal operation.