Skip to main content

rucio-register

Command and API to add Butler specific information to Rucio metadata.

This is a guide to using the rucio-register command for registering Butler files with Rucio.

Butler files are expected to be located in a Rucio directory structure, below a directory named for a Rucio scope. For example, if the root of the Rucio directory is "/rucio/disks/xrd1/rucio" and the Rucio scope is "test", the files should be located below "/rucio/disks/xrd1/rucio/test".

Example

The command "rucio-register" registers files with Rucio. This command requires a YAML configuration file which specifies the Rucio rse and scope, as well as the root of the directory where files are deposited, and the external reference to the Rucio RSE. This configuration file can be specified on the command line, or in the environment variable RUCIO_REGISTER_CONFIG.

The command can register data-products or raws:

for data products:

rucio-register data-products --log-level INFO --repo /rucio/disks/xrd1/rucio/test --collections HSC/runs/RC2/w_2023_32/DM-40356/20230814T170253Z --dataset-type  visitSummary --rucio-dataset rubin_dataset --rucio-register-config register_config.yaml

for raws:

rucio-register raws --log-level INFO --repo /rucio/disks/xrd1/rucio/test --rucio-dataset rubin_dataset --collections LATISS/raw/all --rucio-register-config register_config.yaml \*

Note that for raws, this is similar to how one uses the butler command

This command looks for files registered in the butler repo "/repo/main" using the "dataset-type" and "collections" arguments to query the butler. Note that the repo name's suffix is the Rucio "scope". In this example, that scope is "main".

The resulting datasets' files are registered with Rucio, as specified in the "config.yaml" file. Additionally, those files are registered with the Rucio dataset specified by the "rucio-dataset" argument.

for zip files:

rucio-register zips --rucio-dataset rubin_dataset --log-level INFO --rucio-register-config /home/lsst/rucio_register/examples/register_config.yaml --zip-file file:///rucio/disks/xrd1/rucio/test/something/2c8f9e54-9757-54c0-9119-4c3ac812a2da.zip

Note for zip files, register a single zip file at a time.

for dimension record YAML files:

rucio-register dimensions --rucio-dataset rubin_dataset --log-level INFO --rucio-register-config /home/lsst/rucio_register/examples/register_config.yaml --dimension-file file:///rucio/disks/xrd1/rucio/test/something/dimensions.yaml

Note for dimension files, register a single dimension file at a time.

auto-register

The auto-register command auto-discovers and registers datasets chronologically by quarters, dynamically partitioning massive collections into chunked Rucio datasets.

Options:

  • --repo: Butler repository path (required).
  • --root-chain: Collection expression / glob pattern to match (required).
  • --start-date: Start date for query in YYYY-MM-DD format (default: 2000-01-01).
  • --cutoff-date: Cutoff date for query in YYYY-MM-DD format (default: current date).
  • --max-workers: Number of concurrent workers for processing batches (default: 5).
  • --split-size: Sub-batch size for parallelizing large datasets into sub-chunks (default: 2000).
  • --transfer-list: Optional URL or local path to a curated YAML list of dataset types to register.
  • --dataset-name-prefix: Optional custom prefix for auto-registered Rucio datasets (replacing default Dataset/{collection}).
  • --clear-is-new: Flag to set is_new Rucio DID metadata to None post-registration.
  • --dry-run: Flag to generate text files containing UUID lists in --out-dir for subsequent dataset-list execution instead of registering directly.
  • --out-dir: Output directory for dry-run files (default: ./uuids).

Examples:

Direct auto-registration with defaults:

rucio-register auto-register \
    --repo /repo/main \
    --root-chain "LATISS/runs/raw/all" \
    --start-date 2024-01-01 \
    --cutoff-date 2024-12-31 \
    --rucio-register-config register_config.yaml

Auto-registration using a curated transfer list URL and custom dataset prefix:

rucio-register auto-register \
    --repo /repo/main \
    --root-chain "HSC/runs/RC2/*" \
    --transfer-list https://github.com/lsst-dm/datasettype_transfer_lists/raw/main/cm_transfer_list.yaml \
    --dataset-name-prefix "Dataset/HSC/RC2" \
    --clear-is-new \
    --max-workers 10 \
    --rucio-register-config register_config.yaml

Generating dry-run UUID lists:

rucio-register auto-register \
    --repo /repo/main \
    --root-chain "LATISS/runs/raw/all" \
    --dry-run \
    --out-dir ./uuids \
    --rucio-register-config register_config.yaml

dataset-list

The dataset-list command registers a batch of Butler datasets specified in a JSON or plain-text UUID list file (such as files generated by auto-register --dry-run or job rescue logs).

Options:

  • --repo: Butler repository path (required).
  • --uuidlist: Path to a file containing dataset UUIDs (required).
  • --rucio-dataset: Target Rucio dataset name (optional if specified via # Dataset/... header in the file).
  • --max-workers: Number of concurrent workers (default: 5).

Examples:

Registering datasets from a single dry-run or rescue UUID file:

rucio-register dataset-list \
    --repo /repo/main \
    --uuidlist ./uuids/repo_main/auto_register/Dataset-LATISS-raw-all-2024Q1-00000001.txt \
    --rucio-dataset Dataset/LATISS/raw/all \
    --rucio-register-config register_config.yaml

Possible usage for multiple dataset-list files (batch processing dry-run outputs in parallel with xargs):

find uuids/ -type f -name "*.txt" | xargs -I {} -n 1 -P 5 rucio-register dataset-list \
    --repo /repo/main \
    --uuidlist {} \
    --rucio-register-config register_config.yaml \
    --log-level INFO

Retries in case of failure

There are a variety of reasons that registeration to Rucio can fail. In an effort to prevent a failure from completely halting the command, rucio-register will attempt to retry registration, and uses exponential backoff as a retry strategy where the wait time between retries grows exponentially.

The default behavior for this is as follows:

--backoff-factor

A multiplier that scales how long the waits are. With exponential backoff, the wait before attempt n is roughly backoff-factor * (2 ** n). So factor=1 gives you waits of 1, 2, 4, 8, 16… seconds. Bump it to backoff-factor=2 and you get 2, 4, 8, 16…; drop it to backoff-factor=0.5 and you get 0.5, 1, 2, 4…. Think of it as a dial that stretches or shrinks the whole waiting curve up and down.

--backoff-max-value

A ceiling on any single wait. Exponential growth gets big fast (1, 2, 4… 512, 1024 seconds), which you usually don't want. backoff-max-value caps how long any one wait can be. With backoff-max-value=60, the waits climb 1, 2, 4, 8, 16, 32, then flatten out at 60, 60, 60, instead of continuing to double.

--backoff-max-tries

The total number of attempts before backoff gives up and lets the error through. It counts all tries, including the very first one.

Put together, a typical setup like backoff-factor=1, backoff-max-value=60, backoff-max-tries=5 means: retry up to 4 times, waiting 1s, then 2s, 4s, 8s — but never longer than 60s on any single wait.

Defaults are backoff-factor=5.0, backoff-max-value=30, backoff-max-tries=8

config.yaml

The config.yaml file includes information which specifies the Rucio RSE to use, the Rucio scope, the local root of the RSE, and the URL prefix of the location where Rucio stores the files.

rucio_rse: "XRD1"
scope: "main"
rse_root: "/rucio/disks/xrd1/rucio"
dtn_url: "root://xrd1:1094//rucio"

export-datasets

Command and to dump Butler dataset, dimension, and calibration validity range data to a YAML file.

This command works alongside "rucio-register". It can be used to record all the files registered into Rucio so that their transfer and ingestion at the destination can be confirmed. In addition, it preserves dimension data and calibration validity range data that is not otherwise transferred via Rucio. This additional data can be useful for repeated ingests of raw and calibration data into Butler repositories.

Examples

To record the dimension values (notably not including the visit dimension, which would have to be regenerated) for a set of raw images:

export-datasets \
    --root /sdf/group/rubin/lsstdata/offline/instrument/ \
    --filename Dataset-LSSTCam-NoTract-20250101-0000.yaml \
    --collections LSSTCam/raw/all \
    --where "instrument='LSSTCam' and day_obs=20250101 and exposure.seq_num IN (1..99)" \
    --limit 30000 \
    /repo/main raw

--root is needed here since the original files are ingested as full URLs with direct.

To record the datasets created by a multi-site processing workflow:

export-datasets \
    --filename Dataset-LSSTCam-Tract2024-Step3-Group5-metadata.yaml \
    --collections step3/group5 \
    --where "tract=2024" \
    $LOCAL_REPO '*_metadata'

Note the use of a glob pattern to select dataset types of interest.

Metadata

Release files for lsst-rucio-register 30.2026.4500

For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.

Source distribution (sdist)

Source distribution for lsst-rucio-register 30.2026.4500
File Size Uploaded Provenance Actions
lsst_rucio_register-30.2026.4500.tar.gz 43.1 kB Without provenance Details for lsst_rucio_register-30.2026.4500.tar.gz

Built distribution (wheel)

Table of built distributions (wheels) for lsst-rucio-register 30.2026.4500
File Interpreter ABI Platform Actions
lsst_rucio_register-30.2026.4500-py3-none-any.whl Python 3 none any Details for lsst_rucio_register-30.2026.4500-py3-none-any.whl

Total release size: 83.8 kB

Release files / lsst_rucio_register-30.2026.4500.tar.gz

Download URL lsst_rucio_register-30.2026.4500.tar.gz
Size 43.1 kB
Tags Source
SHA-256 checksum
How to use checksums
6526651e1b47431e87f560a3cc0ba0be47821ab9a60635250c875bd79b137833
BLAKE2b-256 checksum
How to use checksums
338c1620f39a1fa552128cf908b07e83ad9dd3072028cb1b8015b5c54758b532
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
No
Uploaded via twine/7.0.0 CPython/3.13.16

Release files / lsst_rucio_register-30.2026.4500-py3-none-any.whl

Download URL lsst_rucio_register-30.2026.4500-py3-none-any.whl
Size 40.6 kB
Tags Python 3
SHA-256 checksum
How to use checksums
b275e737f8c869fb507ac4f7ca6f5cbd1e1446bf73c4f26d4f2d98d220b72913
BLAKE2b-256 checksum
How to use checksums
1a5a575d98082382219598d51f0c88058308a581b4e012997c27022369af8c85
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
No
Uploaded via twine/7.0.0 CPython/3.13.16

Security for lsst-rucio-register 30.2026.4500

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

No provenance found

None of the files in this release were uploaded with provenance metadata.

A note on package security

PyPI is a repository for distributing packages, not a service for auditing them. While third-party security researchers and our staff do their best to detect and remove malicious packages, PyPI cannot guarantee the quality, security or suitability of any given package.

To learn more about protecting yourself from malicious actors, visit our package security documentation.

Release history Release notifications | RSS feed

This release
Anthropic, PBC Visionary sponsor Bloomberg Visionary sponsor Hudson River Trading Visionary sponsor Meta Visionary sponsor NVIDIA Visionary sponsor Microsoft Sustainability sponsor Depot Continuous Integration AWS Cloud computing and Security Sponsor Datadog Monitoring Fastly CDN Google Download Analytics Sentry Error logging StatusPage Status page