lua-wrapper 0.6

module for using Lua in Python programs

This module allows Lua code to be used in Python programs.

The interface allows passing Python objects into the Lua environment and using Lua objects in the Python program.

Simple Example

# Setup.
import lua
code = lua.Lua()
code.run('python = require("python")')	# If you want to use it.

# Define a Python function.
def pyfun(arg):
	print('Python function called with arg %s' % arg)

# Define a Lua function.
code.run('function luafun(arg) print("Lua function called with arg " .. arg) end')

# Make the Lua function accessible to Python (this could have been done in one step).
luafun = code.run('return luafun')

# Make the Python function accessible to Lua.
code.run(var = 'pyfun', value = pyfun)

# Run the Lua function from Python.
luafun('from Python')

# Run the Python function from Lua.
code.run('pyfun("from Lua")')

# Create Python compound objects from Lua.
print(type(code.run('return {1, 2, 3}')))	# Lua table (not a Python object)
print(type(code.run('return python.list{1,2,3}')))	# Python list
print(type(code.run('return python.dict{foo = "bar"}')))	# Python dict

This generates the following output:

Lua function called with arg from Python
Python function called with arg from Lua
<class 'lua.Table'>
<class 'list'>
<class 'dict'>

API description

The module API is described below. Note that due to limited time available, this may not be kept entirely up to date. If things don't seem to work as described here, please check the source code.

Module Loading

At the time of this writing, when the module is imported it will load Lua version 5.4. This can be adjusted using the environment variable PYTHON_LUA_VERSION, which should be set to the version ('5.4' is the default). This means that a program which requires a specific Lua version should set this variable before importing the module, even if it is 5.4, to make sure the correct version is loaded. Not doing so will allow the user to try different versions.

# Optional. If this is used, it must come before importing lua.
import os
os.environ['PYTHON_LUA_VERSION'] = '5.4'

# Import Lua module.
import lua

Creating a Lua instance

To use the module, an instance of the Lua class must be created. Creating multiple instances of this class allows you to have completely separate environments, which do not share any state with each other. Note that combining variables from different instances in one command results in undefined behavior.

When creating an instance, the default is to disable all Lua features that are a risk for security or user privacy. Each of these features can be enabled by setting the corresponding constructor parameter to True. The features are:

• debug: enable the debugging library. Not actually unsafe (probably?), but should only be enabled explicitly.
• loadlib: enable the loadlib function. Allows running code on host system and thus cause damage and violate privacy.
• searchers: enable the default contents of package.searchers. This allows loading lua modules using require. When disabled, only standard modules and modules that have been explicitly provided by the host can be accessed.
• doloadfile: enable the dofile and loadfile functions. Allows running lua code from external files. Should not pose risks to the system, but does contain a privacy risk, because lua can find out what other lua files are available on the system. Users should also normally expect that an embedded language cannot access external files, so disabling it follows the Principle of Least Astonishment.
• io: enable the io library. This library allows arbitrary file access on the host system and should only be enabled for trusted Lua code.
• os: enable all of the os module. Even when not enabled, clock, date, difftime, setlocale and time are still available. The rest of os allows running executables on the host system. This should only be enabled for trusted Lua code.

Additionally, the 'python' module, which contains list and dict constructors, can be disabled by setting it to False. It is enabled by default. Note that this setting does not create the python variable; it only allows lua code to require it.

An example instance that allows access of the host filesystem through io is:

code = lua.Lua(io = True)

Setting up the Lua environment

Lua code will usually require access to some variables or functions from Python. There are two methods for granting this access: setting variables, and providing modules.

Setting variables

To set a Lua variable to a Python value, the run() method is used. This method is primarily intended for running Lua code (as described below), but it also serves to set a variable to a value. If a variable is set to a value and code to run is provided in the same call, the variable will be set before the code is run, so it has access to it.

If the variable is mutable (for example, it is a list), then changing the contents of the value will result in a changed value in Python. In other words, mutable variables are passed by reference and remain owned by Python.

my_list = [1, 2, 3]
code.run('foo[2] = "bar"', var = 'foo', value = my_list)
# my_list is now [1, 'bar', 3]. Note that lua-indexing is 1-based.

Providing modules

The more common way to provide access to host functionality is through a module that can be loaded using the require function in Lua. This is done by calling the module function. The argument is a dict, or a Python module. The contents of the argument are provided to Lua. Note that the object itself is not, so if new items are added to the dict, these changes will not show up in Lua. Changes to the values of the items will show up, however.

import my_custom_module
code.module(my_custom_module)
code.run('mod = require "my_custom_module"; mod.custom_function()')

Running Lua code

There are two ways to run Lua code. Using the run() function demonstrated in the previous section, and using the run_file() function.

The run_file() function works very similar to run(). There are two differences:

1. The parameter of run_file is a file name, for run() it is Lua code.
2. run() allows setting a variable to a Python value. run_file() does not.

The intent of both functions is slightly different: run() is meant to be used mostly for situations where eval might have been used if it was Python code; run_file() is meant to be used when exec is more appropriate. In other words, run() would be used for a short computation, while run_file() would be more likely to be used for running a potentially large chunk of code. Because of this, it is convenient for run() to pass a Python value, or perhaps a list or dict, to be used directly, while run_file() will normally need much more, and the module() function will be used to provide it in a more elegant way.

However, while this is the consideration behind the functions, there is nothing to enforce it. If you want to run large amounts of code with run(), or a single line computation with run_file(), it will work without any problems.

Return values

Both run() and run_file() can return a value. This is the primary method for accessing Lua values from Python. (The other option is to provide a container from Python and injecting a value from Lua.) Because Lua functions can return multiple values, this leads to a usability issue: the return value could always be a sequence, but that is invonvenient for the usual case when zero or one value is returned.

This is solved by converting the result in those cases:

• When 0 values are returned, the functions return None instead.
• When 1 value is returned, the functions return that value.
• When 2 or more values are returned, the functions return a list of return values.

This means that Python cannot see the difference between returning 0 values, and returning 1 value which is nil, or between multiple values and a single list. Normally this will not be a problem, but if this is important to the Python program, it can pass the parameter keep_single = True. In that case the returned value is always a list of values, even if it has 0 or 1 elements.

Operators

Most Python operators have obvious behavior when applied to Lua objects and vice versa. For example, when using * the objects will be multiplied. However, there are some exceptions.

1. In Lua there is a difference between adding numbers (which is done with +) and strings (which is done with ..). Unfortunately there is no appropriate operator available in Python, so .. has been mapped to @, the matrix multiplication operator. This means that running lua_table @ python_object from Python will call the __concat method in lua_table's metatable, and that running python_object .. lua_object from Lua will call the __matmul__ method on python_object. Note that this does not apply to simple objects like numbers and strings, because these are converted into native objects on both sides (so a Lua string that is passed to Python becomes a Python str object, and using the @ operator on that does not involve Lua).
2. Lua uses the __close metatable method for to-be-closed variables. Python does not have this concept. The module will call the __close__ method (which despite its name, does not have a special meaning in Python) on the Python object when the underlying Lua object is closed by Lua.

Using Lua tables from Python code

In addition to all the obvious operators (including @ as concat) working normally on Lua tables, there are a few extra members defined on them. Note that attributes cannot be used to access table contents, so luatable.foo does not work, but luatable['foo'] does.

• luatable.dict(): Converts the table to a Python dict, containing all items.
• luatable.list(): Converts the table to a Python list. Only the values with integer keys are inserted, and the list stops at the first missing element. In other words, this is only useful for lists that don't contain nil "values". Also note that the indexing changes: luatable[1] is the first element, and it is the same as luatable.list()[0].
• luatable.pop(index = -1): Removes the last index (or the given index) from the table and shifts the contents of the table to fill its place using table.remove. The index must be an integer. If it is negative, the length of the table is added to it.
• code.make_table(data = ()): Create a Lua table from the given data and return it as a Python object. The object is created in and owned by Lua. The first element in the sequence will have index 1 in the table.

First elements

Because there is a difference between the index of the first element of a list in Python (0) and that of a table in Lua (1), indexing such structures from the other language can be confusing. The module does not account for this. What this means is that you must be aware of which language owns the object. When indexing a Lua table from Python code, the first index is 1, just like in Lua. When indexing a Python list from Lua, the first index is 0, just like in Python.

Here's an example to show this:

python_list = ['zero', 'one', 'two']
lua_table = code.run('return {"one", "two", "three"}')

code.run('print("element 2 in the python list is two: " .. list[2])', var = 'list', value = python_list)
print('element 2 in the lua table is "two":', lua_table[2])