lucio

Render Markdown templates by executing embedded shell or code blocks.

Overview

lucio reads a GitHub-flavored Markdown template, executes the fenced shell or code blocks that are annotated for its consumption, and writes a rendered Markdown file:

lucio README.template.md README.md

lucio is strictly template-to-output, never edits in-place, and fences that are not explicitly marked for lucio pass through byte-for-byte: tabs, trailing spaces, indented fences, tilde fences, HTML comments, are all left intact.

The typical use case is automating the update of documentation for command line tools: the template holds the commands, the rendered file holds the commands and the output they produce. Indeed lucio has been developed to render the Markdown files forming the CLI usage guide for volumito.

The design of lucio aims at achieving flexibility while keeping the tool extremely light (it is published as the sdist PyPI package lucio requiring only minimal dependencies) and the annotations reasonably short and simple for the human user to manually author and maintain.

Features

• Simple trigger syntax based on annotations on fenced blocks
• Byte-for-byte passthrough of everything that is not a trigger block
• Block source, captured stdout, and captured stderr, each shown or hidden per block
• Stdout/stderr contents can be merged or kept separate from the source block
• Support fo "hidden" setup blocks to run commands but that must be omitted from the rendered document
• Raw Markdown file inclusion by path relative to the template
• Check on exit codes, allowing for documenting expected failing behavior while still catching unexpected errors via tool failure
• Syntax errors surface before any block is executed
• AI-generated, Human-reviewed and Human-tested code
• Type-safe implementation with type hints
• Comprehensive unit test coverage (100%)

Requirements

• Python 3.13 or later
• A package/virtual environment manager tool (e.g., micromamba, conda, uv, etc.)
• bash, available on PATH

Installation

IMPORTANT: the examples in the documentation use micromamba to manage virtual environments; feel free to replace it with your favorite tool (conda, uv, etc.).

From PyPI (Recommended)

lucio is published on PyPI as the same-name package lucio, and this is the recommended way of installing it for most users.

Only the first time: create a virtual environment, activate it, and install the latest release of lucio available on PyPI with pip:

$ micromamba create -n lucio_env python=3.13
$ micromamba activate lucio_env

(lucio_env) $ pip install lucio

From Source

Clone this repository and install from source in a virtual environment:

$ git clone https://github.com/pettarin/lucio
$ cd lucio

$ micromamba create -n lucio_env python=3.13
$ micromamba activate lucio_env

(lucio_env) $ pip install -e .
(lucio_env) $ # or
(lucio_env) $ make install-e-this

You should be able to run:

lucio --version
lucio, version 0.0.6

(dropping the (lucio_env) $ prefix in the examples from now on).

Usage

IMPORTANT: lucio might execute dangerous/irreversible commands. Never execute the tool over untrusted input files.

lucio --help
Usage: lucio [OPTIONS] INPUT [OUTPUT]

  Render the Markdown template INPUT into OUTPUT, executing its lucio blocks.

  Without OUTPUT, an INPUT named NAME.template.md or NAME.tmd is rendered into
  NAME.md, and any other INPUT is printed on stdout. An OUTPUT of "-" always
  means stdout, and the diagnostics of the tool always go to stderr, so the
  two never mix.

  The rendered document opens with a comment naming the template it came from,
  unless -E is given.

  The template is rendered in memory and written out only once everything
  succeeded, so a failing block leaves OUTPUT untouched.

Options:
  -b, --block-timeout FLOAT       Timeout for one block, in seconds; -1 for no
                                  timeout.  [default: 60.0]
  -D, --do-not-color              Do not color the messages of the tool.
  -E, --omit-do-not-edit-comment  Do not open the rendered document with the
                                  do-not-edit comment.
  -O, --overwrite-files           Overwrite OUTPUT if it already exists.
  -P, --pager                     Print the data output through a pager (when
                                  on a terminal).
  -R, --remove-do-not-edit-comment-on-include
                                  Strip the do-not-edit comment from an
                                  included file.
  -t, --total-timeout FLOAT       Timeout for the whole run, in seconds; -1
                                  for no timeout.  [default: 300.0]
  -v, --verbose                   Log each executed block and its exit code to
                                  stderr.
  -V, --version                   Show the version and exit.
  -h, --help                      Show this message and exit.

INPUT is required; OUTPUT is optional, and the two must resolve to different files. Where the rendered document ends up depends on the two arguments:

INPUT	OUTPUT	Destination
NAME.template.md	(omitted)	NAME.md, next to INPUT
NAME.tmd	(omitted)	NAME.md, next to INPUT
anything else	(omitted)	stdout
anything	-	stdout
anything	a path	that path

Examples:

lucio README.template.md          # writes README.md
lucio README.tmd                  # writes README.md
lucio README.mark /tmp/OUT.mark   # writes /tmp/OUT.mark
lucio README.tmd -                # writes to stdout

An OUTPUT of - prints the document instead of writing it, which keeps lucio usable in a pipeline even for a template-named INPUT:

lucio README.template.md - | less

-P / --pager does the same without the pipe, sending the document to your PAGER when stdout is a terminal (but it is ignored when issued with redirection to file):

lucio README.template.md - -P

An existing OUTPUT is never overwritten by accident, including when its path is derived: lucio refuses to overwrite files unless the -O / --overwrite-files option is specified. The check happens before the template is parsed, so a refusal costs nothing and executes no block.

Do-not-edit Comment

By default, the rendered document opens with a comment naming the template it came from, so that whoever finds the generated file knows what to edit instead:

<!-- This file README.md has been rendered by CLI tool 'lucio'. Do not edit this file, but rather its template README.template.md . -->

This behavior can be prevented by issuing the -E / --omit-do-not-edit-comment option.

Logging

Logs and messages from lucio are printed to stderr, to avoid mixing them with the rendered document written to stdout.

The messages of the tool go through the Python standard logging machinery, under the logger named lucio, and come out on stderr stamped with the UTC time and their level:

[2026-08-11T10:14:52.310Z] [DEBU] Input file: "/home/user/lucio/README.template.md"
[2026-08-11T10:14:52.310Z] [DEBU] Output file: "/home/user/lucio/README.md"
[2026-08-11T10:14:52.310Z] [DEBU] Omit do-not-edit comment: False
[2026-08-11T10:14:52.311Z] [DEBU] Overwrite files: True
[2026-08-11T10:14:52.311Z] [DEBU] Pager: False
[2026-08-11T10:14:52.311Z] [DEBU] Block timeout: 60.0 seconds
[2026-08-11T10:14:52.311Z] [DEBU] Total timeout: 300.0 seconds
[2026-08-11T10:14:52.312Z] [INFO] Rendering "README.template.md" into "README.md"...
[2026-08-11T10:14:52.318Z] [DEBU] README.template.md:12: executing bash block
[2026-08-11T10:14:52.402Z] [DEBU] README.template.md:12: exit code 0
[2026-08-11T10:14:52.404Z] [DEBU] README.template.md:24: including "PART.md"
[2026-08-11T10:14:52.406Z] [INFO] Rendering "README.template.md" into "README.md"... done

Messages at log level INFO and above are shown by default. Use option -v / --verbose to show DEBUG messages.

The messages are colored according to their level when stderr is a terminal, while option -D / --do-not-color turns coloration off.

Timeouts

Two timeouts bound a run: each block is given 60 seconds, and the run as a whole is given 300 seconds. Pass -b / --block-timeout and -t / --total-timeout to raise or lower either, or the special value -1 to disable it.

Exit Codes

Code	Meaning
0	success: OUTPUT was written, or the document was printed on stdout
1	OUTPUT could not be written, or it exists and --overwrite-files was not given
2	usage error (missing or bad arguments, INPUT and OUTPUT are the same file)
3	template error: syntax error, or INPUT cannot be read or decoded
4	execution error: unexpected exit code, timed-out block, bash not runnable

On any error other than 0, OUTPUT is never opened and stdout stays empty: a pre-existing OUTPUT is left exactly as it was.

Newlines And Whitespace

• CRLF line endings in the template are normalized to LF on read; a lone CR is left alone.
• A captured stream is normalized to end with exactly one newline; a stream holding nothing but newlines counts as empty.
• The output file ends with exactly one newline.
• The do-not-edit comment and the blank line below it are the only bytes lucio adds of its own; issuing -E / --omit-do-not-edit-comment removes them.
• Everything else, whitespace included, is copied byte-for-byte.
• A fence is emitted with as many backticks as needed to wrap the captured output, even if it contains fences of its own. A merged fence grows only when the output demands it; as long as it does not, the closing line of the template is reused byte-for-byte.

Template Syntax

Only fences annotated with the trigger word lucio are processed:

```bash lucio [key=value ...]
```

Anything else is ordinary Markdown: ```bash, ```bash lucioX, ```bash run lucio, ```lucio, ```bash include, and <!-- include FILE.md --> all pass through untouched, as does any trigger fence written inside a longer fence (that is how the examples in this file survive).

Bash Blocks (bash lucio)

The body of the block is executed by Bash, and the block is replaced by its source fence and/or what the body printed:

```bash lucio
echo "hello"
```

renders as:

```bash
echo "hello"
hello
```

Note that the info string is reduced to bash in the output, while the body and the closing fence are copied byte-for-byte.

By default the captured output is merged into the source fence, right after the commands that produced it, the way a terminal transcript reads. With merge=false it goes into a separate unlabeled fence instead, one blank line below the source:

```bash lucio merge=false
echo "hello"
```

renders as two fenced blocks:

```bash
echo "hello"
```

```
hello
```

Either way, stdout comes first and stderr after it, and if the selected streams are empty no output is emitted at all. You can use stream redirection (e.g., 2>&1) in the source block to interleave the stdout/stderr contents.

Attributes

Key	Values	Default	Applies To	Meaning
command	execute, include	execute		what the block does
exit	any, or int in [0, 255]	0	execute	the exit code the block must exit with (if not, lucio run fails)
merge	true, false	true	execute	put the captured output inside the source fence, rather than in a fence of its own
path	a file path	N/A	include	the file command=include reads
show_source	true, false	true	execute	emit the source block, as a plain ```bash fence
stderr	true, false	true	execute	include the captured stderr in the output
stdout	true, false	true	execute	include the captured stdout in the output

Attributes are key=value tokens, separated by whitespace. A value may be wrapped in double quotes, and must be if it contains spaces, as in path="/path/with spaces/FILE.md"; the quotes come off before the value is checked, so stdout="true" means exactly stdout=true. Booleans are written true and false, lowercase like every other value; attempting to use for instance True, TRUE, or 1 will produce an error. Specifying unknown keys, keys not supported by the given command, repeating a key, mispelled tokens or values will error out as well.

merge does nothing if show_source=false or there is no output to merge (e.g., empty stdout/stderr contents, or stdout=false and stderr=false).

A block with show_source=false stdout=false stderr=false renders to nothing: it is a hidden block that can be used to run "setup" commands (e.g., creating or removing files, etc.) before other trigger blocks are executed.

Blank lines around hidden blocks are collapsed, so they leave no trace in the output. Every block runs in the working directory lucio was invoked from, so a hidden block can prepare files for the blocks below it:

```bash lucio show_source=false stdout=false stderr=false
rm -f ./configuration.yaml
echo "answer: 42" > ./myotherfile.yaml
```

As anticipated above, there are two types of Bash blocks, depending on the command attribute: command=execute blocks (default), and command=include blocks, described in the next subsections.

Bash Blocks With command=execute

```bash lucio [command=execute] [exit=0] [show_source=true] [stdout=true] [stderr=true] [merge=true]
# write any Bash command(s) to be executed as the block body
echo "Hello World!"
touch /tmp/myfile
```

Each block is executed in its own Bash subprocess, with the body passed verbatim and nothing injected into it, so shell state (variables, cd, functions) does not carry over from one block to the next; the filesystem, of course, does.

If a block exits with a code other than the expected one, the whole run is aborted and OUTPUT is not written. Expected failures must declared with exit to prevent that:

```bash lucio exit=1
cat missing_file.txt
```

Specify exit=any to accept whatever return code the block returns.

The verbose log will show something similar to the following:

[2026-08-11T10:14:52.402Z] [DEBU] README.template.md:12: exit code 1 (permitted by exit=1)
[2026-08-11T10:14:53.118Z] [DEBU] README.template.md:24: exit code 3 (permitted by exit=any)

Bash Blocks With command=include

```bash lucio command=include path=CONFIGURATION_FILE.md
```

The file named by path is pasted raw, as Markdown, in place of the block: no source fence, no output fence, and no Bash execution is involved. The block takes no attribute other than path, nor body. Timeouts do not apply, since no processing happens.

A relative path is resolved against the directory of the template, so a template and the files it includes travel together and can be rendered from anywhere. Note that this differs from the Bash blocks, which run in the working directory lucio was invoked from.

An absolute path is taken as it is. A leading ~ and any $VARIABLE or ${VARIABLE} are expanded first, so a template can name a file outside its own tree without hard-coding a machine; naming a variable that is not set aborts the run, rather than silently reading from the wrong place.

The file is pasted as it is: a trigger fence inside it is text, not something lucio renders in turn. A file that cannot be read aborts the run, like any other failing block.

Including a file that lucio generated might paste its do-not-edit comment along with it, in the middle of the main document and even possibly naming the wrong template. Option -R / --remove-do-not-edit-comment-on-include drops that opening comment and the blank line below it, from every file included in the run:

```bash lucio command=include path=PART.md
```

PART.md, itself rendered by lucio:      included with -R:

<!-- This file PART.md has ... -->      ## Part

## Part                                 Text.

Text.

Only the first line is considered, and only when it is a comment lucio itself would have written: licence headers, linter directives, another generator's banners, etc. are left unchanged.

Note that -R is about the file being read, while -E is about the file being written; a run of lucio can use either, both or neither.

Development

See the DEVELOPMENT document.

License

This project is licensed under the GNU General Public License v3.0 or later (GPLv3+).

See the LICENSE file for details.

Authors

• Alberto Pettarin (Web)