lxst 0.4.5

Lightweight Extensible Signal Transport for Reticulum

Lightweight Extensible Signal Transport

LXST is a simple and flexible real-time streaming format and delivery protocol that allows a wide variety of implementations, while using as little bandwidth as possible. It is built on top of Reticulum and offers zero-conf stream routing, end-to-end encryption and Forward Secrecy, and can be transported over any kind of medium that Reticulum supports.

• Cross-platform, works on Linux, Android, Windows and Mac
• Provides a variety of ready-to-use primitives, for easily creating applications such as:
  • Telephony and live voice calls
  • Two-way radio systems
    • Direct peer-to-peer radio communications
    • Trunked and routed real-time radio systems
  • Media streaming
  • Broadcast radio
  • Public address systems
• Can handle real-time signal streams with end-to-end latencies below 10 milliseconds
• Supports encoding and decoding stream contents with a range of different codecs
  • Raw and lossless streams with arbitrary sample rates
    • Up to 32 channels
    • Up to 128-bit sample precision
  • Efficient, high-quality voice and audio with OPUS
    • Many different built-in profiles, from ~4.5kbps to ~96kbps
    • Profiles are pre-tuned for different applications, such as:
      • Low-bandwidth voice
      • Medium quality voice
      • High quality, perceptually lossless voice
      • Media content such as podcasts
      • Perceptually lossless stereo music
  • Ultra low-bandwidth voice communications with Codec2
    • Provides intelligible voice between 700bps and 3200bps
• Can dynamically switch codecs mid-stream without stream re-initialization or frame loss
• Has in-band signalling support for call signalling, communications, metadata embedding, media and stream management
• Uses a fully staged signal pipelining, allowing arbitrary stream routing
• Provides built-in signal mixing support for any number of channels

Transport Encryption

LXST uses encryption provided by Reticulum, and thus provides end-to-end encryption, guaranteed data integrity and authenticity, as well as forward secrecy by default.

Project Status & License

This software is in a very early alpha state, and will change rapidly with ongoing development. Consider no APIs stable. Consider everything explosive. Not all features are implemented. Nothing is documented. For a fully functional LXST program, take a look at Sideband or the included rnphone program, which provides telephony service over Reticulum. Everything else will currently be a voyage of your own making.

While under early development, and unless otherwise noted, the project is kept under a CC BY-NC-ND 4.0 license.

Installation

If you want to try out LXST, you can install it with pip:

pip install lxst

On Raspberry Pi (assuming Trixie / Debian 13), install various dependencies with:

# Audio codecs
sudo apt install python3-pyaudio codec2

# For hardware control over I2C:
pip install smbus2 --break-system-packages # Install smbus module if not already installed
sudo raspi-config # Enable the I2C bus under "Interface Options"
sudo apt install python3-rpi.gpio # Install gpio module system-wide