Pre-release
This release is a pre-release and may not be stable for production use.
Materials Corrosion Toolkit · 재료·부식 건전성 평가 툴킷
재료, 부식, 전기화학, 확산, 구조 건전성, 제작·용접, 비파괴검사와 평가 결과 연결을 위한 독립 Python 단위 모듈 모음입니다. 각 모듈은 목적·입력 계약·단위·적용 조건·출력과 계산 근거를 드러내도록 구성했습니다. 사용자가 파라미터와 자료를 제공하고 필요한 모듈만 선택하여 호출할 수 있습니다.
배포 이름: materials-corrosion-toolkit · Python import: matintegrity · 첫 공개 버전: 0.1.0a1 · 라이선스: MIT(코드)
연구용 알파 버전입니다. 계산 실행, 수식 확인, 데이터 보정, 독립 실험 검증, 현장 적용성은 서로 다른 상태입니다. 이 툴킷은 규격 인증·자동 설계 합격·운전 안전 보증을 제공하지 않습니다. 미확인 값을 정상값으로 채우거나 결정론적 손상을 고장확률로 바꾸지 않습니다.
빠른 찾기
- 아래 63개 핵심 계산군: 어떤 물리를 계산하며 무엇을 넣고 받는지 먼저 확인
- 아래 전체 단위 API: 757개 등록 API를 목적·주요 입출력과 함께 한눈에 찾기
- 상세 단위 모듈 설명서: 모든 최상위 입력·필수값·기본값·제약·중첩 스키마·출력 단위·구현·예제
- 처음부터 사용하는 설명서 · 입력/출력 공통 계약
- 개발 과정 전체 기록 · 검증 재현·연구 재개
- 검증 현황과 알려진 한계 · 원자료·의존성·라이선스
설치
python -m pip install materials-corrosion-toolkit==0.1.0a1
# 과학 계산·파일 읽기·CoolProp을 함께 사용할 경우
python -m pip install "materials-corrosion-toolkit[science,thermo]==0.1.0a1"
# 소스 개발 환경
git clone https://github.com/lyullee/materials-corrosion-toolkit.git
cd materials-corrosion-toolkit
python -m pip install -e ".[science,thermo,dev]"
기본 설치는 NumPy·Pydantic·Pint만 필요합니다. SciPy, CoolProp, pandas, rainflow, 파일 형식 라이브러리는 해당 기능에서 사용합니다. 별도 ebsd extra는 DefDAP 연동용입니다. 필요한 물성·속도상수·판정 기준을 툴킷이 임의로 만들어 주지는 않습니다.
바로 실행되는 작은 예제
질량 감소량을 밀도와 노출 면적으로 나누어 평균 손실 두께를 구하고, 시간을 적용해 평균 부식속도를 계산합니다. 여기의 숫자는 자체 작성한 설명용 값입니다.
from matintegrity import evaluate
from matintegrity.contracts import RunContext
result = evaluate(
"corrosion.coupon_loss",
{"mass_loss_kg": 0.001, "exposed_area_m2": 0.01,
"density_kg_m3": 1000.0, "duration_s": 100.0},
RunContext(asset_id="example-asset", location_id="example-coupon", time_basis="elapsed seconds"),
)
assert result.status == "computed"
print(result.values["mean_penetration_m"]) # 0.0001 m
print(result.values["rate_m_s"]) # 0.000001 m/s
print(result.units)
print(result.model_dump_json()) # 입력·출력·근거·문맥·해시를 함께 보관
모듈 입력과 출력 확인
from matintegrity.registry import default_registry
registry = default_registry()
print(registry.list_models())
definition = registry.describe("corrosion.coupon_loss")
print(definition["input_schema"]) # 필수 입력, 타입, 한계, 중첩 $defs
print(definition["output_units"])
print(definition["assumptions"])
evaluate()/run()은 Python 입력, run_json()은 JSON 입력을 받습니다. 엄격한 Python 계약에서는 중첩 tuple/list 구분이 적용되므로 JSON 파일·웹 API에서 받은 자료는 run_json()이 편리합니다. 입력 숫자를 문자열에서 자동 변환하거나 단위를 임의 추측하지 않습니다.
공통 결과 계약
| 필드 | 의미 |
|---|---|
status |
computed: 선언 모델 계산 완료, needs_data: 자료·검토·선행 결과 부족, out_of_scope: 적용·수치 범위 밖 |
inputs, values, units |
실제 사용 입력, 계산 결과, 선언 단위 |
model_id, model_version |
단위 API 식별자와 계산 모델 버전 |
context |
설비·위치·시간 기준과 사용자가 제공한 문맥 |
assumptions, notes, qualification |
가정·진단·결과 해석 범위 |
input_digest, source_ids, runtime |
입력 해시·구현 근거·실행 라이브러리 정보 |
probability_semantics |
확률을 반환하는 API의 명시적 확률 의미 |
computed가 곧 구조 안전이나 기준 적합은 아닙니다. needs_data와 out_of_scope를 후속 계산의 정상 결과로 처리하지 마세요. 초기 두께·기준 두께·균열 형상·물성·환경·하중·교정·자료 사용권한은 사용자가 근거와 함께 제공해야 합니다.
핵심 물리 계산군 63개
63개는 물리 기능 묶음입니다. 이 묶음의 개별 실행 감사 대상은 232개 API이며, 전체 757개 등록 API에는 자료 읽기·교환·검사 기록·워크플로도 포함됩니다. 757개의 독립 물리 솔버를 검증했다는 뜻이 아닙니다. 아래는 군별 대표 API의 입출력입니다. 전체 입력은 해당 API 링크에서 바로 확인할 수 있습니다.
| 번호 | 계산 목적 | 대표 단위 API | 주요 입력 | 선언 출력 |
|---|
| 1 | 질량감소 기반 부식속도 | corrosion.coupon_loss | mass_loss_kg, exposed_area_m2, density_kg_m3, duration_s | mean_penetration_m, rate_m_s, rate_mm_year |
| 2 | Faraday 전류·전하 기반 금속손실 | corrosion.faraday | current_density_A_m2, molar_mass_kg_mol, electrons_per_atom, density_kg_m3 외 2개 | rate_m_s, penetration_m |
| 3 | 분극저항 기반 부식전류 | corrosion.stern_geary | anodic_tafel_slope_V_decade, cathodic_tafel_slope_V_decade, area_normalized_resistance_ohm_m2 | stern_geary_coefficient_V, corrosion_current_density_A_m2 |
| 4 | 갈바닉 전류 및 저항 결합 | degradation.galvanic_resistive_coupling | assessment_id, asset_id, location_id, environment 외 13개 | electrode_interface_potential_V, signed_net_electrode_current_A, series_voltage_drop_V 외 1개 |
| 5 | 혼합전위·Butler–Volmer 전극반응 | corrosion.mixed_potential | electrodes, quasi_steady_reviewed, negligible_ohmic_drop_reviewed, condition_compatibility_reviewed 외 3개 | mixed_potential_V, electrode_net_current_A, total_positive_net_current_A 외 2개 |
| 6 | Nernst 평형전위 | degradation.crevice_nernst_potential_history | assessment_id, asset_id, location_id, physical_scope_id 외 25개 | source_inventory_sha256, elapsed_time_s, temperature_K 외 8개 |
| 7 | 경험식 기반 시간별 부식·두께손실 | corrosion.power_law | coefficient_m, exponent, exposure_s, reference_time_s | penetration_m |
| 8 | 대기환경 기반 부식손실 | corrosion.atmospheric_first_year_prediction | prediction_id, asset_id, location_id, physical_scope_id 외 16개 | predicted_first_year_loss_m, equivalent_first_year_rate_m_s, predicted_log_first_year_loss_m 외 7개 |
| 9 | 침식·부식 결합 손실 | degradation.erosion_corrosion_loss | assessment_id, asset_id, location_id, physical_scope_id 외 11개 | assessment_id, asset_id, location_id 외 11개 |
| 10 | 응력부식균열 성장 | degradation.scc_crack_velocity_history | assessment_id, asset_id, location_id, physical_scope_id 외 18개 | time_s, K_I_Pa_sqrt_m, crack_advance_m_by_knot[] 외 2개 |
| 11 | 질량작용·탄산계 수용액 평형 | chemistry.aqueous_mass_action_speciation | assessment_id, solution_id, temperature_K, activity_standard_state 외 25개 | temperature_K, species.dimensionless_activity, species.concentration_mol_L 외 27개 |
| 12 | 비이상 용액 활동도 | chemistry.davies_activity_coefficients | assessment_id, solution_id, temperature_K, ionic_strength_limit_mol_kg 외 13개 | ionic_strength_mol_kg, charge_balance_residual_mol_kg, activity_standard_state 외 3개 |
| 13 | 단일·경쟁 고체상 평형 | chemistry.competitive_solid_bdot_equilibrium | equilibrium, water_mass_per_solution_volume_kg_L, debye_huckel_A_at_temperature, debye_huckel_B_at_temperature_sqrt_kg_mol_per_angstrom 외 18개 | temperature_K, ionic_strength_mol_kg, charge_balance_residual_mol_kg 외 7개 |
| 14 | 수용액 반응망 속도 적분 | chemistry.crevice_activity_based_reaction_rates | assessment_id, asset_id, physical_scope_id, state_id 외 17개 | temperature_K, reaction_rates.*.forward_extent_rate_mol_m3_s, reaction_rates.*.reverse_extent_rate_mol_m3_s 외 4개 |
| 15 | 핵생성·석출·용해 속도 및 재고 | chemistry.competitive_solid_saturation_kinetics | assessment_id, physical_scope_id, provider_id, provider_revision 외 14개 | temperature_K, intervals[].start_time_s, intervals[].end_time_s 외 11개 |
| 16 | 표면 피복·스케일 반응속도 | chemistry.caller_scale_coverage_kinetics | assessment_id, physical_scope_id, substrate_condition_id, solution_condition_id 외 38개 | temperature_K, scale_history[].temperature_K, scale_history[].attachment_rate_constant_s 외 42개 |
| 17 | 다층 스케일 확산·반응·이동경계 | chemistry.planar_scale_diffusion_reaction_history | assessment_id, physical_scope_id, clock_id, scale_phase_id 외 15개 | final_thickness_m, history[].signed_scale_molar_transfer_mol_m2 |
| 18 | 기액 물질전달·이중막 | degradation.wet_co2_two_film_transfer | assessment_id, asset_id, location_id, physical_scope_id 외 17개 | time_s, temperature_K, co2_fugacity_Pa 외 12개 |
| 19 | 습윤 CO2 반응·수송·전극·스케일 동시결합 | integration.wet_co2_cylindrical_transient_transport | assessment_id, geometry, geometry_sha256, species 외 18개 | history[].time_s, history[].radial_edges_m[], history[].cell_concentration_mol_m3_by_species.*[] 외 4개 |
| 20 | Fick 확산 | transport.semi_infinite_diffusion | diffusivity_m2_s, exposure_s, depth_m, initial_concentration_mol_m3 외 1개 | concentration_mol_m3, surface_flux_mol_m2_s, integrated_excess_mol_m2 |
| 21 | 벽 반응을 포함한 확산 | chemistry.crevice_steady_wall_sink | calculation_id, asset_id, location_id, geometry_id 외 12개 | position_m, concentration_mol_m3, mean_concentration_mol_m3 외 4개 |
| 22 | 이온 Nernst–Planck 수송 | transport.crevice_activity_corrected_nernst_planck_1d | assessment_id, asset_id, physical_scope_id, clock_id 외 25개 | cell_width_m, state_history[].time_s, state_history[].species_concentration_mol_m3_by_id.*[] 외 5개 |
| 23 | 틈 내부 성분·화학·전극·고체 동시 적분 | integration.crevice_component_state_bdf | assessment_id, time_s, cells, initial_component_inventory 외 65개 | time_s[], cells[].solution_volume_L, initial_component_inventory[].inventory_mol_by_cell[] 외 84개 |
| 24 | 슬릿 유동·관성·압력·체적 연속 | corrosion.planar_slit_transient_hydraulic_history | assessment_id, asset_id, location_id, physical_scope_id 외 39개 | volumetric_flow_history_m3_s[], interval_results[].integrated_signed_volume_m3, interval_results[].end_cell_velocity_m_s[] 외 4개 |
| 25 | 수소 확산·포획·방출·표면반응 | transport.hydrogen_slab_kinetic | material_condition_id, reference_lattice_id, elapsed_time_origin_id, thickness_m 외 22개 | elapsed_time_s, cell_centers_m, final_lattice_hydrogen_atoms_mol_m3 외 9개 |
| 26 | 박육·후육 원통 압력응력 | mechanics.thin_cylinder | pressure_difference_Pa, mean_radius_m, wall_thickness_m, allowable_hoop_stress_Pa | hoop_stress_Pa, axial_stress_Pa, allowable_pressure_difference_Pa 외 1개 |
| 27 | 응력텐서·주응력·불변량 | mechanics.plane_stress | stress_x_Pa, stress_y_Pa, shear_xy_Pa | principal_max_Pa, principal_min_Pa, von_mises_Pa |
| 28 | 열팽창 구속·두께방향 열응력 | mechanics.thermal_restraint | young_modulus_Pa, expansion_coefficient_per_K, temperature_change_K, restraint_fraction | free_thermal_strain, restrained_uniaxial_stress_Pa |
| 29 | 볼트 체결·탄성 조인트·마찰 토크 | fabrication.elastic_joint_load | initial_bolt_force_N, bolt_stiffness_N_m, clamped_stiffness_N_m, external_separating_force_N 외 2개 | bolt_force_N, clamp_force_N, thermal_preload_change_N |
| 30 | 플랜지·가스켓 비선형 접촉평형 | fabrication.flange_nonlinear_contact_field | assessment_id, joint_id, physical_scope_id, response_provider_id 외 23개 | response_field.circumferential_coordinate_rad, response_field.contact_force_N, response_field.mean_contact_pressure_Pa 외 11개 |
| 31 | 가스켓 점탄성·응력완화 | fabrication.gasket_prony_joint_history | request_id, joint_id, material, compression_area_m2 외 10개 | response_history.elapsed_time_s, response_history.compressive_strain, response_history.compressive_displacement_m 외 9개 |
| 32 | 보정 누설식·가스켓 누설 이력 | fabrication.gasket_calibrated_leakage_history | assessment_id, asset_id, joint_id, physical_scope_id 외 23개 | time_s, contact_area_sum_m2, calibration_contact_pressure_support_Pa 외 14개 |
| 33 | 잔존두께·프로파일 압력용량 | structural.profile_capacity | geometry_id, material_condition_id, reference_wall_thickness_m, axial_position_m 외 8개 | declared_model_pressure_difference_capacity_Pa, minimum_measured_thickness_m, capacity_reduction_factor 외 2개 |
| 34 | 균열 응력확대계수 | fracture.stress_intensity | crack_depth_m, tensile_stress_Pa, geometry_factor, fracture_toughness_Pa_sqrt_m | stress_intensity_Pa_sqrt_m, toughness_margin_Pa_sqrt_m, critical_depth_m |
| 35 | FAD 파괴평가점·경계 비교 | structural.failure_assessment_points | material_condition_id, curve, points, linear_elastic_k_solution_reviewed 외 4개 | points.toughness_ratio_Kr, points.load_ratio_Lr, points.allowable_toughness_ratio 외 3개 |
| 36 | Paris·표 기반 균열전파 적분 | fracture.variable_paris | initial_depth_m, terminal_depth_m, geometry_depth_m, geometry_factor 외 12개 | final_depth_m, cycles_evaluated, requested_cycles |
| 37 | Norton 정상 크리프 변형 | creep.norton | stress_Pa, reference_stress_Pa, rate_at_reference_stress_per_s, stress_exponent 외 1개 | steady_creep_strain_rate_per_s, steady_creep_strain |
| 38 | Larson–Miller 등 크리프 파단 관계 | creep.larson_miller | temperature_K, constant, rupture_time_s | parameter_K |
| 39 | 크리프 시간분율·크리프–피로 손상 | creep.time_fraction | exposure_s, rupture_life_s | time_fraction_damage |
| 40 | 응력–수명·평균응력 보정 | fatigue.basquin | stress_range_Pa, reference_range_Pa, reference_cycles, exponent | cycles_to_failure |
| 41 | 변형률–수명·Morrow·SWT | fatigue.strain_life | strain_amplitude, elastic_modulus_Pa, fatigue_strength_coefficient_Pa, fatigue_strength_exponent 외 4개 | cycles_to_failure, reversals_to_failure |
| 42 | Miner 누적손상 | fatigue.miner | cycle_counts, cycles_to_failure, declared_damage_limit | damage, damage_margin, fraction_of_declared_limit |
| 43 | 임계면 다축피로 | fatigue.critical_plane_fs_life | analysis_id, plane_id, plane_factor_result_sha256, fatemi_socie_factor 외 8개 | cycles_to_failure, reversals_to_failure |
| 44 | 응력불변량 기반 다축피로 | fatigue.multiaxial_crossland_proportional_limit_screen | analysis_id, stress_history, stress_history_sha256, calibration_id 외 11개 | sqrt_J2_stress_amplitude_Pa, maximum_hydrostatic_stress_Pa, crossland_parameter_Pa 외 2개 |
| 45 | 비비례 다축 변형경로 피로 | fatigue.itoh_nonproportional_strain_life | analysis_id, parameter_request, life_curve_id, curve_material_condition_id 외 11개 | itoh_strain_range, cycles_to_failure |
| 46 | J2 반복소성·이동경화 | fatigue.j2_armstrong_frederick_strain_history | analysis_id, base_path, kinematic_modulus_Pa, dynamic_recovery_per_unit_equivalent_plastic_strain 외 6개 | response_history[].stress_tensor_components_Pa, response_history[].plastic_strain_tensor_components, response_history[].backstress_tensor_components_Pa 외 4개 |
| 47 | Neuber 노치 응력–변형률 | fatigue.neuber_notch_strain_amplitude | nominal_stress_amplitude_Pa, elastic_stress_concentration_factor, elastic_modulus_Pa, cyclic_strength_coefficient_Pa 외 4개 | local_stress_amplitude_Pa, local_strain_amplitude, elastic_strain_amplitude 외 6개 |
| 48 | 이력 에너지·텐서 일 기반 피로 | fatigue.closed_tensor_work_life | analysis_id, material_condition_id, location_id, cycles 외 21개 | cycle_results[].signed_closed_loop_work_density_J_m3, cycle_results[].dissipated_energy_density_J_m3, cycle_results[].cycles_to_failure 외 3개 |
| 49 | 다층 정상 열전도·대류·복사 | thermal.planar_layers | thickness_m, conductivity_W_m_K, area_m2, temperature_difference_K | thermal_resistance_K_W, heat_rate_W |
| 50 | 과도 열전도·집중열용량 | thermal.transient_conduction_1d | geometry, cell_edges_m, planar_area_m2, cylinder_length_m 외 17개 | cell_centers_m, temperature_history_K, boundary_surface_temperature_K 외 10개 |
| 51 | Rosenthal 이동 용접열원 | welding.rosenthal_3d_point_source_temperature | absorbed_power_W, travel_speed_m_s, thermal_conductivity_W_m_K, density_kg_m3 외 12개 | thermal_diffusivity_m2_s, temperature_K, temperature_rise_K 외 1개 |
| 52 | CoolProp 상태방정식·퓨가시티 | thermo.co2_fugacity_coolprop | assessment_id, temperature_K, co2_partial_pressure_Pa, backend 외 4개 | temperature_K, co2_partial_pressure_Pa, fugacity_coefficient 외 5개 |
| 53 | 응축막 열·물질 수지 | integration.wet_co2_lumped_wall_thermal_condensation_history | assessment_id, asset_id, location_id, physical_scope_id 외 24개 | final_wall_temperature_K, final_gas_water_vapor_moles, final_wall_water_areal_inventory_kg_m2 외 4개 |
| 54 | 기체 압력감쇠·누설·팽창 에너지 | inspection.gas_pressure_decay | rigid_volume_m3, initial_absolute_pressure_Pa, final_absolute_pressure_Pa, initial_temperature_K 외 12개 | net_molar_outflow_mol_s, reference_volume_outflow_m3_s, fluid_id 외 3개 |
| 55 | Archard 마모 | degradation.archard_wear | dimensionless_wear_coefficient, normal_force_N, sliding_distance_m, hardness_Pa 외 1개 | wear_volume_m3, mean_wear_depth_m |
| 56 | 포물선 산화·비등온 산화 | degradation.parabolic_oxidation | initial_oxide_thickness_m, parabolic_constant_m2_s, exposure_s | oxide_thickness_m, oxide_growth_m |
| 57 | Arrhenius 반응·열적 노화 | kinetics.arrhenius | reference_rate, reference_temperature_K, temperature_K, activation_energy_J_mol | temperature_factor, rate |
| 58 | Ramberg–Osgood·Hollomon 재료 구성관계 | materials.ramberg_osgood | stress_amplitude_Pa, elastic_modulus_Pa, cyclic_strength_coefficient_Pa, cyclic_strain_hardening_exponent | elastic_strain_amplitude, plastic_strain_amplitude, total_strain_amplitude |
| 59 | 완전혼합 가스 퍼지 | welding.well_mixed_gas_purge | basis, compartment_id, component_id, clock_id 외 7개 | history[].end_time_s, history[].volume_exchanges, final_component_mole_fraction |
| 60 | 음극방식 전류·전하·양극 수명 수지 | protection.cathodic_budget | time_s, protected_area_m2, bare_surface_fraction, bare_surface_current_density_A_m2 외 6개 | required_charge_C, mean_current_A, peak_current_A 외 4개 |
| 61 | 캐비테이션 여유·압력강하 지표 | degradation.cavitation_margin | fluid_id, temperature_K, pressure_basis, local_static_pressure_Pa 외 10개 | static_pressure_margin_Pa, static_head_margin_m, characteristic_dynamic_pressure_Pa 외 3개 |
| 62 | 음향 도달시간 기반 위치·깊이 역산 | inspection.tofd_depth | probe_index_separation_m, longitudinal_sound_speed_m_s, delay_from_lateral_wave_s, wall_thickness_m | tip_depth_m, remaining_backwall_ligament_m |
| 63 | FMC/TFM 초음파 영상 재구성 | inspection.homogeneous_fmc_tfm | basis, acquisition_id, physical_specimen_id, physical_scope_id 외 18개 | image[].position_m, image[].coherent_amplitude, point_trace_evaluations |
전체 단위 API 목록
아래 요약의 외 N개는 항목을 생략했다는 표시입니다. API 이름을 누르면 해당 단위 모듈의 모든 최상위 입력과 출력 단위가 펼쳐진 별도 문서로 이동합니다. 중첩 항목은 전체 JSON Schema로 연결됩니다. 동적으로 구성되는 values는 분기마다 달라질 수 있습니다.
adapter · 다른 시스템으로 결과 전달 (4개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
adapter.corrosion_rate_history_to_fault_tree_basic_event |
The deterministic corrosion calculation defines the reviewed condition and finite support but never supplies an event probability. | corrosion_request, corrosion_result 외 1개 |
basic_event.probability, integrity_event_basis.horizon_start_s 외 1개 |
adapter.crevice_faradaic_to_fault_tree_basic_event |
Only a computed integration.crevice_faradaic_spatial_chemistry_coupling result whose model ID, exact request digest, assessment ID a… | integrity_request, integrity_result 외 2개 |
basic_event.probability, horizon_start_s 외 1개 |
adapter.fad_assessment_history_to_fault_tree_basic_event |
Only the exact computed structural.failure_assessment_history result for the supplied request is eligible; the full deterministic so… | fad_request, fad_result 외 1개 |
basic_event.probability, horizon_start_s 외 7개 |
adapter.scc_crack_growth_to_fault_tree_basic_event |
Only the exact computed degradation.scc_crack_velocity_history result for the supplied request is eligible; the complete source calc… | scc_request, scc_result 외 3개 |
basic_event.probability, crack_advance_limit_m 외 9개 |
calibration · 재료·수송·관측 계수 보정 (1개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
calibration.crevice_slit_hydraulic_law_parameters |
Fit only two positive global correction multipliers on the caller-declared reduced lumped slit law; each observation record is diges… | assessment_id, calibration_runs 외 7개 |
observed_volumetric_flow_m3_s[], standard_uncertainty_m3_s[] 외 3개 |
chemistry · 수용액·활동도·평형·고체 반응 (50개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
chemistry.aqueous_bdot_self_consistent_speciation |
Caller-defined aqueous mass-action balances are iterated with species-specific extended Debye-Huckel B-dot coefficients evaluated fr… | system, water_mass_per_solution_volume_kg_L 외 22개 |
temperature_K, ionic_strength_mol_kg 외 14개 |
chemistry.aqueous_davies_self_consistent_speciation |
Caller-defined square aqueous equilibrium/constraint system is solved repeatedly while Davies coefficients are recalculated from spe… | system, water_mass_per_solution_volume_kg_L 외 17개 |
temperature_K, ionic_strength_mol_kg 외 12개 |
chemistry.aqueous_extended_debye_huckel_activity |
All Debye-Huckel A/B coefficients, ionic-strength support, and charged-species ion-size parameters are caller supplied and Evidence-… | assessment_id, solution_id 외 17개 |
ionic_strength_mol_kg, charge_balance_residual_mol_kg 외 2개 |
chemistry.aqueous_extended_debye_huckel_self_consistent_speciation |
Caller-defined square mass-action constraints are solved repeatedly while extended Debye-Huckel gamma is updated from speciation-der… | system, water_mass_per_solution_volume_kg_L 외 22개 |
ionic_strength_mol_kg, charge_balance_residual_mol_kg 외 9개 |
chemistry.aqueous_mass_action_scenario_envelope |
Each complete scenario is caller-provided and solved independently by the existing fixed-topology aqueous mass-action solver. | envelope_id, scenarios 외 4개 |
scenario_results[].temperature_K, scenario_results[].result_values.species[].dimensionless_activity 외 7개 |
chemistry.aqueous_mass_action_speciation |
Caller-supplied single-phase aqueous species, fixed activity coefficients, mass-action equilibrium constants, charge-balanced signed… | assessment_id, solution_id 외 27개 |
temperature_K, species.dimensionless_activity 외 28개 |
chemistry.aqueous_mass_action_topology_envelope |
Each case is a complete caller-declared single-liquid mass-action network using the same solution identity, temperature, species inv… | comparison_id, topologies 외 5개 |
temperature_K, topology_results[].result_values.species[].dimensionless_activity 외 7개 |
chemistry.aqueous_reaction_candidate_enumeration |
Complete caller-supplied formulas and ionic charges define a bounded integer search; candidates satisfy atom and charge conservation… | enumeration_id, species 외 8개 |
candidate_reaction_count, enumerated_side_multiset_count 외 2개 |
chemistry.aqueous_saturation_history_events |
Audit threshold crossings between caller-computed, strictly ordered saturation-ratio knots by reviewed piecewise-linear interpolation. | solid_id, solution_scope_id 외 10개 |
crossing_times_s[], above_threshold_duration_s 외 1개 |
chemistry.aqueous_saturation_screen |
Caller-supplied dimensionless aqueous activities, activity standard state, candidate-solid activity products, and temperature-applic… | assessment_id, solution_id 외 14개 |
temperature_K, candidate_results.log10_ion_activity_product 외 8개 |
chemistry.aqueous_sit_self_consistent_speciation |
Caller-defined square aqueous mass-action equations are iterated with caller-parameterized SIT coefficients evaluated from the resul… | system, water_mass_per_solution_volume_kg_L 외 20개 |
temperature_K, ionic_strength_mol_kg 외 13개 |
chemistry.aqueous_tabulated_activity_speciation |
Caller-defined single-liquid mass-action equations are iterated with species-specific caller activity tables using bounded piecewise… | system, activity_table_temperature_K 외 21개 |
temperature_K, activity_table_temperature_K 외 14개 |
chemistry.aqueous_thermodynamic_cycle_audit |
All species formulas, charges, activity standard state, temperature and equilibrium-constant records are caller supplied and explici… | audit_id, temperature_K 외 14개 |
temperature_K, reaction_balance[].charge_balance_residual 외 5개 |
chemistry.caller_scale_coverage_kinetics |
A caller-supplied first-order surface-coverage attachment/detachment law uses a closed-form solution for constant saturation and ada… | assessment_id, physical_scope_id 외 40개 |
temperature_K, scale_history[].temperature_K 외 43개 |
chemistry.caller_surface_scale_kinetics |
Integrate caller-calibrated single-phase precipitation and dissolution flux laws over constant or explicitly reviewed linear saturat… | assessment_id, physical_scope_id 외 33개 |
temperature_K, rate_reference_temperature_K 외 21개 |
chemistry.carbonate_alkalinity_speciation |
Aqueous carbonate-only alkalinity balance with caller activity-based K1, K2, Kw and activity coefficients. | assessment_id, asset_id 외 24개 |
temperature_K, activity_standard_state 외 19개 |
chemistry.co2_henry_vant_hoff_temperature_correction |
The caller supplies a Henry solubility coefficient, dissolution enthalpy, optional constant heat-capacity change, solvent identity, … | assessment_id, target_temperature_K 외 8개 |
reference_temperature_K, target_temperature_K 외 3개 |
chemistry.competitive_solid_bdot_equilibrium |
The caller supplies temperature-matched, Evidence-linked extended Debye-Huckel A/B, ion-size and B-dot parameters for every phase sp… | equilibrium, water_mass_per_solution_volume_kg_L 외 20개 |
temperature_K, ionic_strength_mol_kg 외 8개 |
chemistry.competitive_solid_davies_equilibrium |
Caller-declared competing neutral pure-solid equilibrium is iterated with Davies coefficients recalculated from the resulting single… | equilibrium, water_mass_per_solution_volume_kg_L 외 15개 |
temperature_K, ionic_strength_mol_kg 외 8개 |
chemistry.competitive_solid_equilibrium |
Caller-declared competing neutral pure solids in one fixed-volume liquid with fixed activity coefficients; candidate phase list, sto… | equilibrium_id, aqueous_species 외 11개 |
final_aqueous_concentration_mol_m3, solid_phase_results |
chemistry.competitive_solid_kinetic_ledger |
Apply caller-supplied signed phase extent rates sequentially with explicit solid-inventory and common aqueous-reactant limits; verif… | assessment_id, physical_scope_id 외 14개 |
intervals[].start_time_s, intervals[].end_time_s 외 4개 |
chemistry.competitive_solid_saturation_kinetics |
Map caller-reviewed interval saturation ratios to per-phase precipitation or dissolution power-law rates, then apply the existing el… | assessment_id, physical_scope_id 외 16개 |
temperature_K, intervals[].start_time_s 외 12개 |
chemistry.competitive_solid_sit_equilibrium |
The caller supplies source-linked directional SIT interactions, temperature-specific A, standard-state mapping and complete phase ch… | equilibrium, water_mass_per_solution_volume_kg_L 외 19개 |
temperature_K, ionic_strength_mol_kg 외 6개 |
chemistry.crevice_activity_based_reaction_rates |
Caller supplies one positive single-liquid state, single-ion activity coefficients and reversible rate records on a dimensionless ac… | assessment_id, asset_id 외 19개 |
temperature_K, reaction_rates.*.forward_extent_rate_mol_m3_s 외 5개 |
chemistry.crevice_aqueous_kinetic_network |
Finite caller-declared species and element/charge-balanced reversible reactions in a single constant-volume mixed liquid. | assessment_id, asset_id 외 23개 |
history[].concentration_mol_m3_by_species, history[].reaction_extent_mol_m3_by_reaction |
chemistry.crevice_bdf_kinetic_phase_set |
The contract binds exact ordered caller phase and kinetic-law records; it does not calculate a trajectory. | assessment_id, asset_id 외 13개 |
temperature_K, valid_time_s[] 외 1개 |
chemistry.crevice_closed_batch_aqueous_equilibrium |
A complete explicit constraint role map distinguishes dynamic conserved components from caller-fixed targets and exact zero-target c… | assessment_id, cell_id 외 14개 |
solution_volume_L, initial_species_amounts[].amount_mol 외 3개 |
chemistry.crevice_competing_solid_equilibrium |
One fixed, homogeneous solution volume and one temperature are used with fixed caller activity coefficients and standard states. | assessment_id, asset_id 외 18개 |
aqueous_species[].initial_concentration_mol_m3, aqueous_species[].final_concentration_mol_m3 외 4개 |
chemistry.crevice_component_solid_partition |
Total component inventory includes all liquid and candidate solid material; the caller reviews candidate-set completeness and instan… | assessment_id, cell 외 15개 |
total_component_inventory[].total_moles, aqueous_component_inventory_mol.* 외 9개 |
chemistry.crevice_nucleation_kinetic_history |
Saturation is caller supplied and held constant over each exact interval. | assessment_id, physical_scope_id 외 25개 |
temperature_K, intervals[].start_time_s 외 6개 |
chemistry.crevice_spatial_activity_solid_fixed_point |
Each caller cell is solved independently at one fixed geometry knot using the existing Davies activity/speciation and finite competi… | assessment_id, geometry_mode 외 16개 |
cells[].aqueous_activity_input.system.constraints[].target_mol_L, cells[].solid_equilibrium_template.aqueous_species[].initial_concentration_mol_m3 외 4개 |
chemistry.crevice_steady_wall_sink |
One dissolved species follows steady one-dimensional diffusion and irreversible first-order wall consumption in a caller-reviewed fi… | calculation_id, asset_id 외 14개 |
position_m, concentration_mol_m3 외 5개 |
chemistry.crevice_transient_wall_sink |
One dissolved species follows fixed-geometry one-dimensional diffusion with a fixed-concentration mouth, zero-flux blind tip and fir… | calculation_id, asset_id 외 19개 |
concentration_rows[].elapsed_time_s, concentration_rows[].concentration_mol_m3[] 외 2개 |
chemistry.davies_activity_coefficients |
Ionic strength is calculated from the caller-reviewed complete molal species inventory; electroneutrality is checked against an expl… | assessment_id, solution_id 외 15개 |
ionic_strength_mol_kg, charge_balance_residual_mol_kg 외 4개 |
chemistry.fixed_fugacity_carbonate_equilibrium |
Fixed caller-supplied CO2 fugacity reservoir and Henry coefficient at the sample temperature; carbonate-only aqueous activity equili… | assessment_id, asset_id 외 36개 |
temperature_K, co2_fugacity_Pa 외 12개 |
chemistry.fixed_fugacity_carbonate_history |
Solves each caller-supplied fixed-fugacity carbonate/alkalinity state at one exact ordered time point; no interpolation or kinetics … | history_id, asset_id 외 7개 |
history_id, asset_id 외 13개 |
chemistry.fixed_fugacity_carbonate_scenario_ensemble |
Each row is a complete reviewed fixed-fugacity carbonate-equilibrium case with common sample identity and caller-normalized weights. | ensemble_id, asset_id 외 12개 |
ensemble_id, asset_id 외 14개 |
chemistry.layered_scale_diffusion_limit |
Caller-supplied layered effective diffusivity, partition coefficients, thickness, concentration endpoints and covered-area fraction … | assessment_id, physical_scope_id 외 31개 |
driving_concentration_difference_mol_m3, bare_film_resistance_s_m 외 9개 |
chemistry.layered_scale_history_series_transport |
One digest-pinned, caller-calibrated thickness history is supplied for each ordered diffusion layer, with identical exact time knots… | transport_request, layer_bindings 외 4개 |
scale_history_sources[].scale_thickness_m, knots[].time_s 외 1개 |
chemistry.layered_scale_history_stack_transport |
Bind one exact common time knot from a distinct caller-calibrated single-phase thickness history into every named layer of an ordere… | transport_request, selected_time_s 외 4개 |
selected_time_s, layered_diffusion_result.values.area_average_flux_limit_mol_m2_s 외 1개 |
chemistry.pitzer_salt_finite_scenario_envelope |
All scenarios share one caller-reviewed pure-salt formula and temperature and retain their supplied order. | envelope_id, scenarios 외 3개 |
finite_scenario_extrema.ionic_strength_mol_kg.minimum, finite_scenario_extrema.ionic_strength_mol_kg.maximum 외 8개 |
chemistry.pitzer_salt_saturation_index |
One caller-reviewed pure-salt Pitzer calculation and one temperature-matched caller Ksp record share the declared mean-ionic standar… | assessment_id, activity_request 외 12개 |
mean_ionic_activity_mol_kg_water, log10_ion_activity_product 외 2개 |
chemistry.pitzer_single_salt_activity |
One pure aqueous electrolyte with a caller-reviewed electroneutral formula, molality-scale Pitzer-Debye-Huckel Aphi/b, beta0/beta1/b… | assessment_id, salt_id 외 28개 |
ionic_strength_mol_kg, mean_ionic_activity_coefficient 외 9개 |
chemistry.planar_scale_diffusion_reaction_history |
Fixed-area dense single-phase planar scale; one-to-one transported-species/solid molar balance. | assessment_id, physical_scope_id 외 17개 |
final_thickness_m, history[].signed_scale_molar_transfer_mol_m2 |
chemistry.planar_scale_reaction_demand_balance |
Single dense planar scale with quasi-steady diffusion/interface resistance and caller constant consuming reaction demand per interval. | assessment_id, physical_scope_id 외 26개 |
final_thickness_m, history[].consumed_scale_mol_m2 외 1개 |
chemistry.scale_precipitation_inventory_budget |
Use the gross per-area precipitation amounts from one exact digest-pinned caller scale history and multiply by one caller-declared e… | assessment_id, physical_scope_id 외 11개 |
exposed_area_m2, limiting_reactants[].initial_available_mol 외 7개 |
chemistry.single_solid_precipitation_equilibrium |
One explicitly declared neutral pure solid with fixed activity coefficients/solution volume and atom/charge-conserving extent; no co… | equilibrium_id, solid_species_id 외 13개 |
reaction_extent_mol_m3, final_solid_moles_per_solution_volume_mol_m3 |
chemistry.sit_activity_coefficients |
The caller provides every used directional interaction coefficient and reviews completeness, units, temperature and applicability. | assessment_id, solution_id 외 17개 |
ionic_strength_mol_kg, charge_balance_residual_mol_kg 외 6개 |
chemistry.solution_concentration_conversion |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, component_id 외 7개 |
component_id, solution_state_id 외 5개 |
chemistry.wet_co2_neutral_solid_formula_proposals |
For every caller-listed positive cation and negative anion, reduce integer stoichiometric coefficients to the smallest charge-neutra… | proposal_set_id, cations 외 6개 |
formula_proposals[].elemental_composition |
corrosion · 부식속도·전류·손실·틈 부식 (37개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
corrosion.atmospheric_first_year_fit |
Conditional log-linear first-year atmospheric carbon-steel loss model with temperature, relative humidity, chloride and sulfur-dioxi… | fit_id, model_id 외 12개 |
model, calibration_metrics 외 13개 |
corrosion.atmospheric_first_year_prediction |
Uses only a reviewed AtmosphericFirstYearModel over one first-year atmospheric carbon-steel exposure and explicit environmental cova… | prediction_id, asset_id 외 18개 |
predicted_first_year_loss_m, equivalent_first_year_rate_m_s 외 8개 |
corrosion.charge_to_loss |
Declared alloy dissolution equivalent and current efficiency; cathodic current is not included in anodic charge. | anodic_charge_C, equivalent_weight_kg_mol_electron 외 2개 |
dissolved_mass_kg, dissolved_volume_m3 |
corrosion.chronoamperometry_window_summary |
Time and current units, strict sample order, current sign and source trace digest are explicitly reviewed. | trace_id, physical_specimen_id 외 14개 |
analysis_window_s, analysis_duration_s 외 16개 |
corrosion.coupled_wall_metal_loss |
Signed integrated lateral-wall species flux is converted with reviewed metal stoichiometry, physical reference area, reactive wall a… | coupled_result, coupled_result_sha256 외 1개 |
wall_metal_loss.elapsed_time_s, wall_metal_loss.reactive_wall_area_m2 외 6개 |
corrosion.coupon_loss |
Uniform average loss over the declared exposed area; cleaning loss is corrected upstream. | mass_loss_kg, exposed_area_m2 외 2개 |
mean_penetration_m, rate_m_s 외 1개 |
corrosion.coupon_loss_with_uncertainty |
Caller supplies corrected mass loss, geometry, material density, exposure duration and joint input covariance. | observation_id, physical_specimen_id 외 14개 |
mean_penetration_m, rate_m_s 외 4개 |
corrosion.crevice_hydraulic_stage_rhs |
The API evaluates one instantaneous series-slit momentum RHS. | assessment_id, physical_scope_id 외 34개 |
time_s, signed_volumetric_flow_m3_s 외 21개 |
corrosion.crevice_moving_volume_hydraulic_history |
Aperture varies linearly within each caller interval, so liquid volume rate is interval constant. | assessment_id, physical_scope_id 외 26개 |
time_s, pressure_drop_Pa_by_interval[] 외 8개 |
corrosion.crevice_solid_volume_rate |
Positive phase molar rate denotes precipitation and negative rate denotes dissolution. | assessment_id, physical_scope_id 외 12개 |
time_s, phase_molar_rate_mol_s_by_cell[][] 외 4개 |
corrosion.crevice_wall_shear_exposure |
Derive wide-planar-slit wall shear per cell from a digest-pinned exact interval flow history; analytically integrate absolute shear … | assessment_id, hydraulic_result 외 5개 |
dynamic_viscosity_Pa_s, transverse_width_m 외 11개 |
corrosion.explicit_co2_campaign |
Explicit caller-calibrated carbonate boundary, reaction/ionic transport, surface kinetics and reviewed metal-dissolution mapping in … | campaign_id, carbonate_boundary 외 6개 |
— |
corrosion.faraday |
Declared dissolution valence and current efficiency; no automatic pit geometry inference. | current_density_A_m2, molar_mass_kg_mol 외 4개 |
rate_m_s, penetration_m |
corrosion.galvanic_linear |
Same potential reference, linear electrode polarization and an explicit validity bound; no mass-transport limitation. | anodic_free_potential_V, cathodic_free_potential_V 외 6개 |
coupling_current_A, anodic_current_density_A_m2 외 3개 |
corrosion.gumbel_area_maximum |
Equal-area complete independent block maxima from one declared surface population and exposure; caller-selected Gumbel or generalize… | extreme_value_family, population_id 외 17개 |
fitted_block_location_m, fitted_block_scale_m 외 6개 |
corrosion.material_rate_contrast |
Input rates and condition groups are supplied by the caller; matched methodology and exposure conditions require source review. | comparison_id, numerator_material_id 외 7개 |
numerator_rate_m_s, reference_rate_m_s 외 3개 |
corrosion.mixed_potential |
Reviewed compatible signed net polarization curves share one reference, electrolyte and temperature; negligible ohmic drop and quasi… | electrodes, quasi_steady_reviewed 외 5개 |
mixed_potential_V, electrode_net_current_A 외 3개 |
corrosion.model_output_rate_wall_loss_scenario |
Accepts portable simulated or caller-assumed scenario rows with matching source evidence, digest and common source group. | rows, current_thickness_m 외 11개 |
scenario_rates_m_s, scenario_remaining_thickness_m 외 4개 |
corrosion.piecewise_linear_rate_thickness_history |
Each rate knot is caller supplied with Evidence and a canonical record digest; the rate path is piecewise linear only between adjace… | history_id, asset_id 외 16개 |
support_start_s, support_end_s 외 18개 |
corrosion.planar_slit_aperture_history |
Sequential geometry remapping from a caller-pinned cell-average signed wall-recession history within declared aperture support; supp… | geometry_id, geometry_source_sha256 외 15개 |
cell_aperture_m, geometry_states[].elapsed_time_s 외 11개 |
corrosion.planar_slit_geometry |
Explicit constant-aperture planar slit and selected reactive broad faces; no kinetics or advection inferred. | geometry_id, source_sha256 외 5개 |
length_m, axial_cross_section_m2 외 2개 |
corrosion.planar_slit_hydraulic_flow |
Steady incompressible Newtonian laminar flow in caller-declared variable-gap planar-slit cells; optional aperture state is digest-bo… | flow_id, geometry_source_sha256 외 13개 |
volume_flow_rate_m3_s, transport_face_velocity_m_s 외 1개 |
corrosion.planar_slit_hydraulic_history |
Digest-bound pressure samples are paired to every computed aperture-history knot; each knot is solved independently and the result i… | flow_history_id, aperture_history_result 외 12개 |
elapsed_time_s, flow_snapshots |
corrosion.planar_slit_transient_hydraulic_history |
Exact interval propagation for the caller-reviewed reduced balance I dQ/dt + R Q = pressure_drop with piecewise-constant pressure an… | assessment_id, asset_id 외 41개 |
volumetric_flow_history_m3_s[], interval_results[].integrated_signed_volume_m3 외 5개 |
corrosion.power_law |
Empirical coefficients apply only to their calibration domain and chosen reference time. | coefficient_m, exponent 외 2개 |
penetration_m |
corrosion.rate_joint_scenario |
Each rate and weight is a caller-supplied complete scenario; one-per-specimen sample lineage is preserved separately. | sample, current_thickness_m 외 14개 |
scenario_rate_mean_m_s, scenario_remaining_thickness_m 외 4개 |
corrosion.rate_quantile_forecast |
Uses exactly one selected empirical quantile from one-per-specimen caller rate summaries after explicit material, transfer and fixed… | sample, selected_quantile_level 외 9개 |
thickness_margin_m, predicted_thickness_m 외 9개 |
corrosion.rate_sample_summary |
One caller-reviewed rate summary per unique physical specimen, all from one material, condition, method and source group. | observations, quantile_probabilities 외 1개 |
arithmetic_mean_rate_m_s, between_specimen_sample_standard_deviation_m_s 외 6개 |
corrosion.scale_diffusion_metal_loss_bound |
A single computed layered-scale flux limit caps a caller-declared complete set of branches that produce the same transported species. | assessment_id, physical_scope_id 외 12개 |
area_average_flux_limit_mol_m2_s, exposure_duration_s 외 7개 |
corrosion.simulation_rate_wall_loss_scenario |
Uses attributed simulated-model-output rows as scenario inputs while keeping them distinct from physical specimen observations. | rows, current_thickness_m 외 11개 |
scenario_rates_m_s, scenario_remaining_thickness_m 외 4개 |
corrosion.stern_geary |
Small-signal polarization resistance is corrected for solution resistance and normalized by exposed area. | anodic_tafel_slope_V_decade, cathodic_tafel_slope_V_decade 외 1개 |
stern_geary_coefficient_V, corrosion_current_density_A_m2 |
corrosion.thickness_trend |
Same measurement location and unchanged repair/operating regime; residuals are not POD. | time_s, thickness_m 외 1개 |
rate_m_s, thickness_at_first_time_m 외 2개 |
corrosion.ti12mo5zr_aesec_signed_equivalent_penetration |
Caller-approved Ti-12Mo-5Zr density is applicable to the analyzed material. | local_archive_path, density_kg_m3 외 11개 |
mass_balance.points[].signed_net_mass_flux_kg_m2_s, mass_balance.points[].signed_equivalent_penetration_velocity_m_s 외 3개 |
corrosion.ti12mo5zr_eis_complex_impedance |
Convert one exact allowlisted Ti-12Mo-5Zr EIS spectrum from provider impedance magnitude and degrees to complex components under a c… | rows, phase_sign 외 5개 |
points[].provider_frequency_Hz, points[].provider_time_s 외 3개 |
corrosion.ti12mo5zr_ocp_signed_window_summary |
OCP rows are complete and ordered within the exact pinned source member. | rows, window_start_s 외 6개 |
window_start_s, window_end_s 외 7개 |
corrosion.ti12mo5zr_uniform_equivalent_remaining_thickness |
The embedded source assessment, its registry input digest, complete result digest, and nested mass-balance digest are caller-pinned … | assessment, expected_assessment_input_digest 외 9개 |
remaining_thickness_history.knots[].remaining_thickness_m, remaining_thickness_history.knots[].provider_time_s 외 2개 |
corrosion.uniform_forecast |
Constant nonnegative growth; required thickness supplied by a separately qualified assessment. | current_thickness_m, required_thickness_m 외 2개 |
thickness_margin_m, predicted_thickness_m 외 2개 |
creep · 크리프 속도·파단·누적손상 (9개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
creep.accelerated_lognormal_rupture_fit |
Log rupture time is linear in log(reference stress / stress) and reciprocal-temperature difference. | fit_id, asset_id 외 22개 |
fit_id, physical_scope_id 외 12개 |
creep.conditional_life |
Condition-bounded lognormal population under unchanged conditions from a fresh-material age origin. | model, material_condition_id 외 9개 |
median_life_s, probability_given_survival 외 2개 |
creep.declared_log_slope_rupture_factor |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, material_condition_id 외 4개 |
uncapped_factor, capped_factor 외 1개 |
creep.larson_miller |
Base-10 logarithm uses hours and temperature uses Kelvin; constant is not supplied by the library. | temperature_K, constant 외 1개 |
parameter_K |
creep.lognormal_life_fit |
Independent constant-condition specimens with explicit right-censoring and one common rupture mechanism. | material_condition_id, stress_basis 외 11개 |
negative_log_likelihood_seconds, information_condition_number |
creep.norton |
Isothermal, constant-load empirical steady-creep power law with a dimensionless stress ratio. | stress_Pa, reference_stress_Pa 외 3개 |
steady_creep_strain_rate_per_s, steady_creep_strain |
creep.secondary_history |
Ordered caller-calibrated secondary-creep history with separately reviewed rupture-time fractions inside explicit condition support. | history_id, material_condition_id 외 5개 |
interval_strain_increments, cumulative_strain_at_boundaries 외 2개 |
creep.time_fraction |
Linear life fractions with supplied rupture lives; creep-fatigue interaction excluded. | exposure_s, rupture_life_s |
time_fraction_damage |
creep.zener_hollomon_parameter |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, material_condition_id 외 6개 |
material_condition_id, strain_rate_definition_id 외 6개 |
data · 허용된 외부 자료 구조 확인·읽기 (28개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
data.bam_cmsx6_creep_lis_typed_rows |
Only one catalog-pinned local LIS asset is accepted; raw records remain local-only. | local_file_path, authorization |
model_id, dataset_id 외 4개 |
data.coqtel_typed_electrochemistry_rows |
Only the two checksum-pinned COQTEL HDF5 assets are accepted through the existing source reader. | local_hdf5_path, authorization |
source_file_bytes, row_count 외 1개 |
data.figshare_corrosion_alloy_metrics_typed_rows |
Only the pinned CC BY compilation workbook is accepted; publisher MD5 and acquisition SHA-256 are checked before reusing the existin… | local_workbook_path, authorization |
source_file_bytes, long_form_metric_row_count 외 1개 |
data.mendeley_ahss1300_hydrogen_permeation_workbook_audit |
Only the exact provider-pinned Mendeley workbook is accepted by filename, size, MD5 and SHA-256. | local_workbook_path, authorization |
provider_bytes, worksheet_manifests[].maximum_row 외 3개 |
data.mendeley_aisi1018_aerobic_corrosion_file_inventory |
Only the exact 22 Mendeley Data v1 files, byte sizes and provider SHA-256 digests are accepted. | local_data_directory, authorization 외 2개 |
inventory_count, provider_bytes |
data.mendeley_atmospheric_corrosion_typed_rows |
Only the catalogued archive name, byte count, Mendeley archive SHA-256 and MD5 are accepted. | local_archive_path, partition 외 1개 |
source_archive_bytes, programme_row_count 외 1개 |
data.mendeley_az31b_corrosion_fatigue_typed_rows |
Only eight exact Mendeley Data version-1 XLSX assets are accepted by file name, byte count and SHA-256. | local_data_directory, authorization |
bytes, rows 외 1개 |
data.mendeley_crack_arrest_typed_rows |
Only the exact catalogued archive filename, byte count and SHA-256 are accepted before reusing the existing bounded CSV reader. | local_archive_path, specimen_id 외 1개 |
source_archive_bytes, source_row_count 외 1개 |
data.mendeley_explosive_weld_multilayer_fatigue_mapped_rows |
The caller maps each worksheet, header value, inclusive row span, field meaning, unit token and field role. | local_data_directory, authorization 외 4개 |
source_file_bytes, row_count |
data.mendeley_explosive_weld_multilayer_fatigue_typed_rows |
Only the exact Mendeley version-1 workbook is accepted by filename, byte count and SHA-256. | local_data_directory, authorization |
bytes, rows 외 1개 |
data.mendeley_fracture_toughness_temperature_typed_rows |
Only the exact catalogued Mendeley archive name, byte count, SHA-256 and workbook member digest are accepted. | local_archive_path, temperature_unit_override 외 5개 |
source_archive_bytes, observation_count 외 2개 |
data.mendeley_guided_wave_typed_sample_rows |
Only the catalogued outer archive SHA-256 and byte count are accepted; the existing bounded nested-archive parser is reused. | local_archive_path, acquisition_id 외 3개 |
outer_archive_bytes, sample_count 외 1개 |
data.mendeley_internal_corrosion_doobn_typed_rows |
Audit the exact Mendeley Data version 3 workbook by official file size and SHA-256. | local_workbook_path, authorization |
source_file_bytes, max_row 외 1개 |
data.mendeley_mdea_co2_eis_typed_rows |
Read only pinned Mendeley Data version 3 assets after manifest and provider SHA-256 checks. | local_data_directory, authorization |
file_size, potential 외 1개 |
data.mendeley_mg_fsp_scc_typed_rows |
Only the four exact Mendeley Data version-1 XLSX assets are accepted by name, size and SHA-256. | local_data_directory, authorization |
bytes, rows 외 1개 |
data.mendeley_thermal_rod_typed_rows |
Only the catalogued archive name, byte count and SHA-256 are accepted; rows come from the existing raw-run parser. | local_archive_path, run_id 외 1개 |
source_archive_bytes, source_row_count |
data.mendeley_x80_srb_scc_typed_rows |
Audit only three exact Mendeley version-1 XLS assets using official byte counts and SHA-256 values. | local_data_directory, authorization |
bytes, rows 외 1개 |
data.plos_ct110_wet_co2_typed_rows |
The exact publisher workbook size, MD5 and local SHA-256 must match before parsing. | local_workbook_path, authorization |
temperature_support_C, typed_measurement_rows |
data.uci_metropt3_process_history |
Only the exact UCI archive/member digest and local path are accepted. | local_archive_path, authorization |
archive_bytes, member_bytes 외 1개 |
data.zenodo_316l_polarization_typed_rows |
Only the catalogued archive filename, byte count, provider MD5 and SHA-256 are accepted. | local_archive_path, authorization |
archive_bytes, raw_curve_count |
data.zenodo_cathodic_protection_sample_rows |
Only five locally held CSV files with exact SHA-256 pins and the reviewed DPlot layout are accepted. | local_data_directory, authorization |
curve_count, sample_count |
data.zenodo_ceit_uniform_corrosion_field_typed_rows |
Only the catalogued CEIT JSON filename, byte count, MD5 and acquisition SHA-256 are accepted before invoking the existing parser. | local_json_path, series_id 외 4개 |
source_file_bytes, observation_count 외 1개 |
data.zenodo_deis_archive_structure |
Read one pinned CC0 Zenodo archive from a caller-supplied local path; network access is not performed. | assessment_id, local_archive_path 외 3개 |
manifest.matrices[].row_count, manifest.matrices[].column_count |
data.zenodo_galvanized_polarization_typed_rows |
Only the three catalogued polarization workbook assets with the declared file size and depositor MD5 are accepted. | local_workbook_path, authorization |
source_file_bytes, sample_count |
data.zenodo_mg_deis_typed_matrix_rows |
Only the catalogued CC0 archive filename, byte count, publisher MD5 and SHA-256 are accepted; the existing bounded matrix parser is … | local_archive_path, source_member_path 외 1개 |
source_archive_bytes, source_row_count 외 1개 |
data.zenodo_pressure_decay_leak_sample_rows |
The exact CC BY 4.0 workbook digest, provider layout and caller attribution are required. | local_archive_path, authorization |
series_count, sample_count |
data.zenodo_ti12mo5hf_archive_audit |
Caller supplies a local file and explicitly authorizes computational use and local-only processing. | local_path, expected_archive_sha256 외 2개 |
archive_audit.archive_bytes, archive_audit.member_count 외 2개 |
data.zenodo_zr_nb_sn_electrochemical_typed_rows |
Only the eight pinned Zenodo v2 XLSX files are accepted by filename, byte length, and SHA-256. | local_workbook_path, authorization |
source_file_bytes |
degradation · 열화·침식·산화·마모·환경 영향 (54개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
degradation.acid_dissolution_history |
Dissolution rates are externally calibrated, explicitly supplied and constant within each declared interval. | history_id, asset_id 외 16개 |
history_id, asset_id 외 9개 |
degradation.alkaline_scc_applicability |
Material, heat treatment, alkaline chemistry, temperature, electrochemical descriptor, stresses and duration are checked only agains… | assessment_id, asset_id 외 15개 |
qualification_test_count, qualification_envelope_count 외 1개 |
degradation.alkaline_scc_user_screening |
Facts and rules are caller-authored and retain evidence record, source group and digest lineage. | assessment_id, asset_id 외 13개 |
assessment_id, mechanism 외 14개 |
degradation.ammonia_scc_applicability |
Material, metallurgy and heat-treatment identities match the qualification evidence exactly. | assessment_id, asset_id 외 14개 |
assessment_id, asset_id 외 9개 |
degradation.ammonia_scc_user_screening |
Facts and rules are caller-authored and retain evidence record, source group and digest lineage. | assessment_id, asset_id 외 13개 |
assessment_id, mechanism 외 14개 |
degradation.archard_wear |
User-calibrated dimensionless wear coefficient, SI hardness and uniformly distributed loss. | dimensionless_wear_coefficient, normal_force_N 외 3개 |
wear_volume_m3, mean_wear_depth_m |
degradation.archard_wear_coefficient_calibration |
Calibration is restricted to one material/counterface/contact/lubrication regime with SI force, distance, hardness and wear volume. | calibration_id, asset_id 외 17개 |
calibration_id, dimensionless_wear_coefficient 외 8개 |
degradation.atmospheric_multi_year_loss_history |
First-year loss and time exponent are externally supplied, reviewed quantities in exact caller units. | history_id, asset_id 외 21개 |
history_id, asset_id 외 10개 |
degradation.atmospheric_scenario_ensemble |
Each scenario is independently passed to the registered first-year atmospheric prediction model. | ensemble_id, asset_id 외 6개 |
ensemble_id, asset_id 외 8개 |
degradation.calibrated_condition_loss_history |
Ordered piecewise-constant conditions mapped through one reviewed calibrated response and integrated without dropping unsupported in… | history_id, physical_location_id 외 3개 |
— |
degradation.calibrated_condition_loss_rate |
Explicit authorized material/mechanism-specific log-rate coefficients, native feature units and bounded support; no default biologic… | law, condition |
loss_rate_m_s |
degradation.calibrated_damage_history |
Explicit calibrated microbial or cavitation rate history; no indicator-to-rate inference. | history_id, mechanism 외 4개 |
cumulative_loss_m, interval_loss_m |
degradation.carburization_applicability |
Material and alloy-condition identities match the caller-owned qualification evidence exactly. | assessment_id, asset_id 외 12개 |
assessment_id, asset_id 외 9개 |
degradation.cavitation_history |
Aligned reviewed absolute local-pressure and equilibrium liquid-property samples with piecewise-linear crossings; duration and press… | history_id, asset_id 외 23개 |
static_pressure_margin_Pa, characteristic_dynamic_pressure_Pa 외 10개 |
degradation.cavitation_margin |
Absolute local static pressure, equilibrium vapor pressure, liquid density and a caller-defined characteristic velocity; thermodynam… | fluid_id, temperature_K 외 12개 |
static_pressure_margin_Pa, static_head_margin_m 외 4개 |
degradation.chloride_scc_applicability |
Material condition and metallurgy identities must match the caller-owned test envelope exactly. | assessment_id, asset_id 외 13개 |
assessment_id, asset_id 외 9개 |
degradation.chloride_scc_user_screening |
Facts and rules are caller-authored and retain evidence record, source group and digest lineage. | assessment_id, asset_id 외 13개 |
assessment_id, mechanism 외 14개 |
degradation.crevice_aperture_displacement_flow |
A pinned complete aperture history supplies fixed cell widths, transverse width and exact cell volumes. | history_id, asset_id 외 10개 |
intervals[].start_time_s, intervals[].end_time_s 외 8개 |
degradation.crevice_lumped_exchange_reaction_history |
Solve a caller-declared fixed-volume, single-species well-mixed exchange and first-order sink balance with exact interval propagation. | assessment_id, asset_id 외 17개 |
concentration_history_mol_m3[], final_inventory_mol 외 3개 |
degradation.crevice_nernst_potential_history |
Apply the Nernst equation at supplied time knots using caller-provided dimensionless activities and standard-potential history. | assessment_id, asset_id 외 27개 |
source_inventory_sha256, elapsed_time_s 외 9개 |
degradation.crevice_species_inventory_history |
Geometry, volumes, species definitions, initial inventories and interval source rates are reviewed caller inputs. | history_id, asset_id 외 18개 |
history_id, asset_id 외 40개 |
degradation.crevice_wall_sink_arrhenius_calibration |
The supplied observations already represent an effective first-order wall-transfer velocity in m/s; this fit does not derive velocit… | calibration_id, physical_scope_id 외 13개 |
reference_wall_transfer_velocity_m_s, reference_temperature_K 외 8개 |
degradation.crevice_wall_sink_rate_history |
Reference rate and activation energy are caller-supplied reviewed wall-law parameters; they are not fitted from the supplied tempera… | history_id, asset_id 외 15개 |
elapsed_time_s[], temperature_K[] 외 8개 |
degradation.damage_mechanism_screening |
Explicit physical scope, caller facts/profiles and conservative missingness policy. | basis, assessment_id 외 9개 |
mechanism_findings |
degradation.declared_temperature_rate_factor |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, material_condition_id 외 7개 |
temperature_K, reference_temperature_K 외 2개 |
degradation.device_pressure_drop_cavitation_index |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, device_id 외 7개 |
device_pressure_drop_cavitation_index, inlet_to_outlet_pressure_drop_Pa 외 1개 |
degradation.erosion_corrosion_loss |
Net thickness-loss rates are externally calibrated, reviewed and constant within each interval. | assessment_id, asset_id 외 13개 |
assessment_id, asset_id 외 12개 |
degradation.erosion_corrosion_power_law_calibration |
Log measured loss rate is linear in log velocity and log particle concentration in one reviewed regime. | calibration_id, asset_id 외 30개 |
calibration_id, physical_scope_id 외 13개 |
degradation.erosion_corrosion_synergy_decomposition |
Pure erosion, pure corrosion and combined loss are caller-supplied matched observations; residual synergy is their signed arithmetic… | assessment_id, asset_id 외 16개 |
interval_results[].duration_s, interval_results[].pure_erosion_rate_m_s 외 40개 |
degradation.galvanic_coupling |
Caller-reviewed, condition-compatible signed polarization curves are solved only on their common measured support. | assessment_id, asset_id 외 12개 |
mixed_potential_V, signed_net_electrode_current_A 외 1개 |
degradation.galvanic_resistive_coupling |
Exactly two reviewed signed net polarization curves share one environment and reference electrode; every root is bounded by both sup… | assessment_id, asset_id 외 15개 |
electrode_interface_potential_V, signed_net_electrode_current_A 외 2개 |
degradation.high_temperature_hydrogen_applicability |
Hydrogen pressure is an absolute partial pressure in pascals; gauge or total pressure is not silently substituted. | assessment_id, asset_id 외 18개 |
assessment_id, physical_scope_id 외 13개 |
degradation.hydrogen_cracking_provider_evidence |
Pressure or fugacity basis and unit are exact caller-reviewed tokens and are never interchanged. | assessment_id, asset_id 외 22개 |
assessment_id, physical_scope_id 외 8개 |
degradation.hydrogen_fatigue_provider_evidence |
Material condition, hydrogen species, quantity basis and units match exactly. | assessment_id, asset_id 외 21개 |
assessment_id, asset_id 외 12개 |
degradation.liquid_metal_embrittlement_applicability |
Structural material, condition, liquid-metal species, composition and impurity identities match qualification evidence exactly. | assessment_id, asset_id 외 15개 |
assessment_id, asset_id 외 10개 |
degradation.metallurgical_aging_exposure |
Each interval uses a caller-calibrated equivalent-time rate multiplier at a reviewed temperature. | assessment_id, asset_id 외 11개 |
assessment_id, clock_id 외 13개 |
degradation.microbial_campaign_summary |
Campaign, site, clock, sample validity, assay identity, detection limits, water context and biofilm/deposit observations remain sepa… | campaign_id, asset_id 외 20개 |
sample_count, valid_sample_count 외 3개 |
degradation.nitriding_applicability |
Material, condition, nitrogen species and driving-force basis, temperature, absolute pressure, gas environment and duration are comp… | assessment_id, asset_id 외 15개 |
qualification_test_count, qualification_envelope_count 외 1개 |
degradation.nonisothermal_parabolic_oxidation |
A retained protective scale follows a caller-qualified parabolic law over the full history. | history_id, asset_id 외 17개 |
history_id, physical_scope_id 외 7개 |
degradation.parabolic_oxidation |
Retained protective scale in one declared isothermal parabolic-growth regime; spallation excluded. | initial_oxide_thickness_m, parabolic_constant_m2_s 외 1개 |
oxide_thickness_m, oxide_growth_m |
degradation.scc_crack_velocity_history |
One caller-owned material/metallurgy/environment/loading state and thresholded K_I-to-da/dt law apply over the finite history. | assessment_id, asset_id 외 20개 |
time_s, K_I_Pa_sqrt_m 외 3개 |
degradation.selective_leaching_applicability |
Alloy, composition, phase, environment, temperature, pH, electrochemical descriptor and exposure duration are compared only with cal… | assessment_id, asset_id 외 18개 |
observation_count |
degradation.sour_environment_applicability |
Material, units, H2S partial-pressure definition and stress-state descriptors use exact matching. | assessment_id, asset_id 외 25개 |
assessment_id, asset_id 외 9개 |
degradation.sulfidation_exposure_applicability |
Material condition, sulfur definition, units, flow and deposit descriptors require exact identity matching. | assessment_id, asset_id 외 23개 |
assessment_id, asset_id 외 11개 |
degradation.under_deposit_calibrated_loss |
Each interval has a reviewed deposit state and an external calibrated local-loss rate within one provider support. | assessment_id, asset_id 외 12개 |
assessment_id, support_id 외 5개 |
degradation.under_deposit_local_environment_review |
Local-environment observations and caller criteria are reviewed and identity-linked. | history |
assessment_id, decision 외 9개 |
degradation.under_insulation |
CUI scope, ordered access/inspection/repair events, explicit coverage and observations remain caller evidence. | assessment_id, asset_id 외 16개 |
report_schema_version, assessment_id 외 13개 |
degradation.under_insulation_exposure_history |
Surface temperature, wetness and insulation condition are piecewise-constant reviewed observations over explicit intervals. | record_id, source_model_id 외 14개 |
record_id, definition_id 외 10개 |
degradation.wet_co2_cylindrical_scale_geometry_history |
Caller-supplied lineal phase inventories and molar volumes map to an annular cylindrical scale volume. | assessment_id, asset_id 외 18개 |
history[].time_s, history[].wall_recession_m 외 9개 |
degradation.wet_co2_gas_side_mass_transfer |
Caller supplies one turbulent gas state with mean velocity, wall shear, density, viscosity and CO2 diffusivity. | assessment_id, asset_id 외 30개 |
time_s, gas_reynolds_number 외 4개 |
degradation.wet_co2_liquid_side_mass_transfer |
The caller supplies the liquid-phase mean velocity and wall shear stress for one exact region/time from a separately identified hydr… | assessment_id, asset_id 외 25개 |
time_s, mean_liquid_velocity_m_s 외 6개 |
degradation.wet_co2_simulation_matched_contrast |
Rows are provider-generated NORSOK M-506 simulation output with matched nonvaried inputs. | lower_factor_row, upper_factor_row 외 3개 |
factor_difference, rate_difference_m_s 외 3개 |
degradation.wet_co2_two_film_transfer |
Caller-supplied fugacity, Henry coefficient and gas/liquid film coefficients share one reviewed condition and area basis. | assessment_id, asset_id 외 19개 |
time_s, temperature_K 외 13개 |
degradation.wet_co2_two_film_transfer_history |
Every point is a caller-declared steady gas/liquid state and uses the existing two-film point evaluator independently. | history_id, asset_id 외 7개 |
committed_prefix_length, knot_rows[].time_s 외 6개 |
design · 설계 입력·사용자 기준 적용 (2개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
design.piping_class_assessment |
Caller-reviewed common gauge-pressure basis, piecewise-linear supported pressure-temperature envelope and exact component/material l… | basis, class_id 외 12개 |
declared_class_outcome, component_findings 외 8개 |
design.relief_pressure_envelope |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, equipment_allowable_gauge_pressure_Pa 외 8개 |
maximum_set_gauge_pressure_Pa, maximum_peak_gauge_pressure_Pa 외 6개 |
electrochemistry · 전위·편극·전극반응 (4개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
electrochemistry.crevice_mixed_potential_history |
At every aligned knot, evaluate multiple caller-provided Nernst half-cell profiles and caller-calibrated Butler-Volmer reactions, ar… | assessment_id, asset_id 외 12개 |
source_history_sha256, source_inventory_sha256 외 14개 |
electrochemistry.mendeley_mdea_eis_complex_channel_conversion |
Caller explicitly maps source headers and the imaginary-axis sign convention. | assessment_id, authorization 외 17개 |
points[].frequency_hz, points[].real_impedance_ohm 외 3개 |
electrochemistry.nernst_driven_butler_volmer_history |
Evaluate one caller-calibrated Butler-Volmer reaction at exact common time knots using an upstream digest-bound Nernst equilibrium-p… | assessment_id, nernst_result 외 22개 |
time_s, temperature_K 외 8개 |
electrochemistry.restricted_transport_campaign |
Caller-calibrated homogeneous ionic reactions and Butler-Volmer tip/wall boundaries on a fixed one-dimensional transport grid; an op… | campaign_id, transport 외 13개 |
— |
fabrication · 가공·볼트·가스켓·제작 품질 (88개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
fabrication.bend_strain |
Kinematic bending estimate; ovalization, thinning and plastic-neutral-axis movement excluded. | outside_diameter_m, centerline_bend_radius_m |
outer_fiber_strain |
fabrication.bolt_preload |
Approximate torque-factor relation; friction scatter and joint stiffness require separate treatment. | torque_N_m, nominal_diameter_m 외 2개 |
preload_N, nominal_tensile_stress_Pa |
fabrication.bolt_reference_torque_scaling |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, bolt_id 외 6개 |
bolt_id, record_sha256 외 3개 |
fabrication.cathodic_protection_field_survey |
Field potential conventions, reference-electrode calibration and IR-drop status remain explicit. | survey_id, asset_id 외 21개 |
survey_id, physical_scope_id 외 7개 |
fabrication.chemical_cleaning_bath_component_inventory |
Component masses are caller-declared and expressed on one consistent component identity basis. | history_id, asset_id 외 9개 |
history_id, event_count 외 4개 |
fabrication.chemical_cleaning_envelope |
Each recorded step has uniform declared solution properties and maps to one caller-owned material compatibility envelope. | cleaning_record_id, asset_id 외 9개 |
cleaning_record_id, step_comparisons 외 4개 |
fabrication.chemical_cleaning_production_campaign_evidence |
Caller criteria only; no kinetics or compatibility inference. | assessment_id, asset_id 외 17개 |
disposition, findings 외 1개 |
fabrication.coating_damage_area_inventory |
Explicit inspected extent and reviewed nonoverlapping damage patch measurements; no uninspected-area inference. | asset_id, location_id 외 7개 |
coated_component_id, inventory_digest 외 9개 |
fabrication.coating_qualification_assessment |
Specimens and source groups are assigned once to calibration or holdout and cannot cross partitions. | qualification_id, coating_system_id 외 13개 |
qualification_id, coating_system_id 외 9개 |
fabrication.cryogenic_valve_evidence |
Valve, body, seat, stem, seal, medium and pressure-basis identities match caller qualification evidence exactly. | assessment_id, asset_id 외 26개 |
assessment_id, asset_id 외 12개 |
fabrication.deposition_removal_history |
Reviewed uniform local layer thickness along one common normal; explicit deposition and top-down removal events. | asset_id, location_id 외 9개 |
physical_region_id, coordinate_frame_id 외 10개 |
fabrication.elastic_joint_load |
Reviewed linear two-spring closed-contact load partition with caller stiffness and differential thermal displacement. | initial_bolt_force_N, bolt_stiffness_N_m 외 4개 |
bolt_force_N, clamp_force_N 외 1개 |
fabrication.equipment_mass_properties |
Complete caller-declared installed mass inventory in one explicit coordinate frame. | asset_id, location_id 외 5개 |
assembly_id, coordinate_frame_id 외 4개 |
fabrication.equipment_two_support_lift |
Caller-reviewed body XY plane, explicit rotation about Z, rigid body and two parallel vertical support reactions. | inventory, first_support_id 외 10개 |
assembly_id, coordinate_frame_id 외 10개 |
fabrication.fire_protection_boundary_history |
The caller supplies the incident flux, protection states, transfer fractions and their reviewed support. | history_id, asset_id 외 16개 |
history_id, asset_id 외 20개 |
fabrication.flange_contact_compliance_reduction |
Condense an explicitly supplied constrained incremental translational stiffness operator to selected signed gasket-contact DOFs. | reduction_id, upstream_solver_id 외 15개 |
flange_relative_compliance_matrix_m_N, minimum_free_stiffness_eigenvalue_N_m 외 1개 |
fabrication.flange_contact_compliance_reduction_history |
Reduce one caller-supplied constrained linear incremental stiffness matrix per aligned geometry/time knot using a fixed node/DOF map… | history_id, upstream_solver_id 외 16개 |
times_s, operator_history[].values.flange_relative_compliance_matrix_m_N |
fabrication.flange_contact_field |
Caller-supplied symmetric positive-semidefinite relative flange compliance and per-node linear gasket springs define the spatial con… | assessment_id, joint_id 외 25개 |
response_field.circumferential_coordinate_rad, response_field.contact_force_N 외 11개 |
fabrication.flange_nonlinear_contact_field |
A caller-supplied symmetric positive-semidefinite flange operator is coupled to per-node reversible monotone piecewise-linear gasket… | assessment_id, joint_id 외 25개 |
response_field.circumferential_coordinate_rad, response_field.contact_force_N 외 12개 |
fabrication.flange_nonlinear_viscoelastic_contact_history |
Caller nonlinear Maxwell branch backbones and equilibrium gasket backbone are coupled to caller-supplied positive-semidefinite flang… | assessment_id, joint_id 외 41개 |
time_history[].time_s, requested_time_knots_s[] 외 43개 |
fabrication.flange_viscoelastic_contact_history |
Caller-supplied linear generalized-Maxwell gasket branches evolve exactly over declared piecewise-linear compression segments and ar… | assessment_id, joint_id 외 32개 |
time_history[].time_s, time_history[].contact_force_sum_N 외 13개 |
fabrication.forming_area_reduction |
Matched material sections and SI areas are explicitly reviewed; no material constitutive law is inferred. | physical_specimen_id, material_condition_id 외 5개 |
physical_specimen_id, material_condition_id 외 5개 |
fabrication.forming_geometry_history |
Caller-reviewed circular-arc bend geometry with a mid-thickness neutral axis. | history_id, asset_id 외 17개 |
history_id, asset_id 외 6개 |
fabrication.forming_process_sequence |
Explicit caller material-specific process plan, ordered operation records and shared clock. | asset_id, location_id 외 12개 |
component_id, clock_id 외 8개 |
fabrication.forming_qualification |
Material, condition, product form, forming mode and method match the envelope exactly. | assessment_id, asset_id 외 22개 |
assessment_id, asset_id 외 13개 |
fabrication.friction_resolved_bolt_torque |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, bolt_id 외 7개 |
bolt_id, thread_raising_torque_N_m 외 4개 |
fabrication.gasket_bolt_cyclic_damage |
Nominal tensile stress histories are read from one digest-pinned computed gasket multi-bolt equilibrium result. | assessment_id, bolt_history_result 외 9개 |
bolt_results[].cycles[].stress_range_Pa, bolt_results[].cycles[].goodman_equivalent_range_Pa 외 5개 |
fabrication.gasket_bolt_nominal_strength_screen |
Consume a computed caller multi-bolt/sector equilibrium and compare its nominal axial bolt stresses with per-bolt caller strength cu… | assessment_id, joint_assessment 외 8개 |
temperature_history_K[], maximum_nominal_strength_utilization 외 5개 |
fabrication.gasket_bolt_preload_sequence_redistribution |
Each tightening operation adds its applied target increment multiplied by the corresponding caller interaction-matrix column to the … | assessment_id, joint_id 외 16개 |
operation_history[].applied_preload_increment_N, operation_history[].preload_N_by_bolt 외 4개 |
fabrication.gasket_calibrated_leakage_history |
Caller-calibrated pressure-dependent leakage flux is evaluated at each contact node and integrated over its declared area for an ali… | assessment_id, asset_id 외 25개 |
time_s, contact_area_sum_m2 외 15개 |
fabrication.gasket_calibrated_leakage_rate_envelope |
Bound a caller-calibrated bilinear leakage flux at each node over independent declared contact-pressure and differential-pressure in… | assessment_id, asset_id 외 14개 |
time_s, minimum_molar_leak_rate_mol_s 외 11개 |
fabrication.gasket_circumferential_contact_continuity |
A computed gasket contact-pressure field is classified against a caller-evidenced minimum pressure and caller-evidenced periodic rin… | assessment_id, physical_scope_id 외 21개 |
ring_radius_m, circumference_m 외 9개 |
fabrication.gasket_compression_curve_monotone_fit |
Observed force values are fit by weighted least-squares isotonic regression at sorted measured compression knots. | assessment_id, gasket_id 외 19개 |
test_condition.temperature_K, test_condition.loading_rate_m_s 외 7개 |
fabrication.gasket_compression_hysteresis_energy |
Every cycle is a caller-segmented ordered compression force-displacement loop with a reviewed repeated count and closed endpoints. | assessment_id, physical_scope_id 외 18개 |
cycle_results[].signed_loop_work_J, cycle_results[].dissipated_energy_J_per_cycle 외 6개 |
fabrication.gasket_contact_distribution_statistics |
Summarize a digest-pinned computed flange gasket pressure field using its own declared finite nodal contact areas. | assessment_id, physical_scope_id 외 10개 |
finite_node_total_area_m2, contact_force_resultant_N 외 10개 |
fabrication.gasket_contact_pressure_screen |
Compare a digest-pinned upstream gasket contact-pressure field with a caller-declared screening window at an exact declared output k… | assessment_id, asset_id 외 20개 |
minimum_contact_pressure_Pa, maximum_contact_pressure_Pa 외 5개 |
fabrication.gasket_contact_pressure_window_events |
Audit exact computed gasket contact-pressure knots against a caller-declared node pressure window using reviewed piecewise-linear in… | assessment_id, physical_scope_id 외 18개 |
minimum_contact_pressure_Pa, maximum_contact_pressure_Pa 외 3개 |
fabrication.gasket_contact_root_localization |
A computed caller-supplied contact-transition bracket and digest-matched endpoint responses with strict opposite signs are required. | assessment_id, physical_scope_id 외 19개 |
localized_bracket_lower_time_s, localized_bracket_upper_time_s 외 2개 |
fabrication.gasket_contact_state_grid_sweep |
Query a caller-declared finite time grid through an explicit external contact-state provider and preserve every provider response di… | assessment_id, physical_scope_id 외 13개 |
probe_times_s[], maximum_probe_gap_s 외 4개 |
fabrication.gasket_contact_subthreshold_exposure |
Integrate a caller-evidenced thresholded pressure exposure over a computed viscoelastic gasket contact history and its finite nodal … | assessment_id, physical_scope_id 외 13개 |
minimum_contact_pressure_Pa, history_start_time_s 외 13개 |
fabrication.gasket_contact_transition_brackets |
Summarize contact-state changes visible between adjacent computed flange-history knots as time brackets. | assessment_id, physical_scope_id 외 7개 |
knot_times_s[], transition_brackets[].lower_time_s 외 6개 |
fabrication.gasket_contact_transition_refinement |
Refine one caller-selected contact-state bracket only with exact provider midpoint evaluations, matching provider identity/revision/… | assessment_id, physical_scope_id 외 17개 |
lower_time_s, upper_time_s 외 5개 |
fabrication.gasket_correlated_scenario_envelope |
Evaluate leakage only over complete caller-supplied joint scenarios that preserve dependence among node pressure, common differentia… | assessment_id, asset_id 외 23개 |
minimum_scenario_molar_leak_rate_mol_s, maximum_scenario_molar_leak_rate_mol_s 외 1개 |
fabrication.gasket_evidence_bound_prony_history |
The underlying caller-calibrated generalized-Maxwell strain update is reused unchanged; this adapter adds source/license/temperature… | request_id, material 외 5개 |
temperature_K, temperature_support_K 외 6개 |
fabrication.gasket_finite_scenario_dependence |
Caller-provided complete finite joint gasket scenarios and positive weights already summing to one. | weighted_scenarios, selected_node_ids 외 3개 |
weighted_means, weighted_centered_second_moment_matrix 외 1개 |
fabrication.gasket_joint_evidence |
Flange, gasket, bolt lots, medium, pressure basis and operating state are caller reviewed. | assessment_id, asset_id 외 25개 |
assessment_id, joint_id 외 12개 |
fabrication.gasket_leakage_box_envelope |
Returns deterministic extrema over caller-specified independent pressure, area and calibration-flux intervals using the piecewise-bi… | assessment_id, asset_id 외 25개 |
minimum_molar_leak_rate_mol_s, maximum_molar_leak_rate_mol_s |
fabrication.gasket_leakage_covariance_propagation |
A caller-supplied symmetric positive-semidefinite covariance is propagated through the local piecewise-bilinear calibrated leakage map. | assessment_id, asset_id 외 24개 |
nominal_molar_leak_rate_mol_s, first_order_standard_uncertainty_mol_s 외 1개 |
fabrication.gasket_leakage_fit_diagnostics |
Compute descriptive raw and residual-scale-normalized error summaries from a digest-pinned completed gasket leakage-map fit. | assessment_id, fit_result 외 4개 |
role_residual_summaries.calibration.mean_signed_error_mol_s_m2, role_residual_summaries.calibration.mean_absolute_error_mol_s_m2 외 6개 |
fabrication.gasket_leakage_map_fit |
Caller-reviewed nonnegative bilinear surface with supplied knot support and residual scales. | assessment_id, joint_scope_id 외 12개 |
observation_results[].predicted_flux_mol_s_m2, observation_results[].signed_residual_mol_s_m2 |
fabrication.gasket_leakage_weighted_scenario_moments |
Evaluate the calibrated leakage response within each complete correlated scenario, then compute descriptive finite-set moments using… | scenario_envelope, scenario_weights 외 10개 |
weighted_mean_molar_leak_rate_mol_s, weighted_population_variance_mol2_s2 외 1개 |
fabrication.gasket_multi_bolt_sector_equilibrium |
Each bolt is an independent caller-specified linear axial spring that carries tension only; each gasket sector carries compression o… | assessment_id, joint_id 외 17개 |
time_s, opening_m 외 5개 |
fabrication.gasket_prony_history |
Caller-authorized generalized Maxwell terms and separately reviewed explicit initial branch stresses are integrated over a reviewed … | request_id, material 외 5개 |
response_history.total_compressive_stress_Pa, response_history.compressive_force_N 외 1개 |
fabrication.gasket_prony_joint_history |
Caller-authorized Prony gasket history is coupled to a linear bolt and quasi-static force equilibrium at each declared time knot. | request_id, joint_id 외 12개 |
response_history.elapsed_time_s, response_history.compressive_strain 외 10개 |
fabrication.gasket_prony_relaxation_spectrum_fit |
Fit a finite positive generalized-Maxwell relaxation spectrum from caller step-strain observations at one exact material condition a… | analysis_id, material_condition_id 외 15개 |
temperature_K, equilibrium_modulus_Pa 외 6개 |
fabrication.gasket_prony_temperature_shift_history |
A caller-calibrated, thermorheologically simple time-temperature shift modifies the Prony relaxation clock while other material para… | base_history, shift_law 외 2개 |
reference_temperature_K, interval_temperature_K[] 외 5개 |
fabrication.gasket_radial_open_path_screen |
The supplied cell pressure map is interpreted on an annulus partitioned by radial and full-ring angular edges. | assessment_id, physical_scope_id 외 17개 |
total_contact_area_m2, area_weighted_mean_contact_pressure_Pa 외 3개 |
fabrication.gasket_relaxation_curve |
Authorized caller retention observations are linearly interpolated only inside the exact declared time support; no universal gasket … | request_id, initial_preload_N 외 3개 |
force_history_N.residual_preload_N, force_history_N.elapsed_time_s |
fabrication.gasket_temperature_compression_curve_transfer |
Only caller-supplied monotone loading curves at two temperatures are used, and they must share specimen, material condition, branch … | assessment_id, physical_scope_id 외 17개 |
loading_curve[].compression_strain_fraction, loading_curve[].compressive_stress_Pa 외 8개 |
fabrication.governing_thickness_recipe |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, component_id 외 7개 |
component_id, joint_geometry_id 외 7개 |
fabrication.heat_exchanger_geometry_evidence |
Exchanger, shell, bundle, coordinate frame, units, ordering and payload digests are caller reviewed. | assessment_id, asset_id 외 25개 |
assessment_id, exchanger_id 외 13개 |
fabrication.insulation_condensation_exposure |
Piecewise-constant, non-overlapping surface and ambient dew-point observations on one reviewed clock. | assessment_id, asset_id 외 18개 |
horizon_duration_s, represented_duration_s 외 7개 |
fabrication.joint_efficiency_declaration |
Joint, process, material group, examination method and physical scope are caller-reviewed exact identities. | assessment_id, asset_id 외 15개 |
assessment_id, joint_id 외 11개 |
fabrication.measured_pipe_ovality |
Caller selects nominal or measured-mean reference diameter; no tolerance or sampling rule is inferred. | maximum_diameter_m, minimum_diameter_m 외 2개 |
diameter_range_m, reference_diameter_m 외 2개 |
fabrication.nonlinear_bolt_gasket_contact |
Single-degree-of-freedom quasi-static joint equilibrium using caller-authorized monotone nonlinear bolt force-extension and gasket f… | joint_id, gasket_curve_id 외 10개 |
bolt_force_N, gasket_force_N 외 4개 |
fabrication.nonlinear_gasket_contact |
Elastic bolt and authorized reversible caller compression-force curve, with explicit contact loss and no extrapolation. | joint_id, gasket_curve_id 외 8개 |
bolt_force_N, gasket_force_N 외 2개 |
fabrication.nonlinear_gasket_prony_joint_history |
Caller-authorized monotone nonlinear stress-strain backbones for equilibrium and generalized-Maxwell branches are coupled to a calle… | request_id, joint_id 외 15개 |
response_history.elapsed_time_s, response_history.compressive_strain 외 11개 |
fabrication.pipe_bend_wall_allowance |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, component_id 외 6개 |
component_id, scenario_id 외 6개 |
fabrication.pull_off_adhesion_calibration |
Force-area stress requires explicit newtons and square metres and is kept separate from provider stress. | calibration_id, asset_id 외 22개 |
calibration_id, physical_scope_id 외 7개 |
fabrication.regular_tube_layout |
Explicit regular square or triangular tube lattice geometry; no shell/baffle clearance or pressure-drop inference. | tube_outer_diameter_m, pitch_m 외 3개 |
ligament_m, ligament_fraction 외 2개 |
fabrication.storage_preservation |
Item, material, area, storage location, preservation method, material batch and event identities are exact caller inputs. | assessment_id, asset_id 외 19개 |
assessment_id, campaign_id 외 12개 |
fabrication.storage_preservation_history |
Piecewise-constant environment observations remain separate from caller-declared temperature, humidity, preservation-state and inspe… | record_id, asset_id 외 18개 |
horizon_duration_s, represented_environment_duration_s 외 19개 |
fabrication.surface_cleanliness_assessment |
Area coverage is summed only after the caller reviews areas as mutually exclusive. | assessment_id, procedure_id 외 12개 |
assessment_id, procedure_id 외 11개 |
fabrication.surface_cleanliness_production_campaign_evidence |
Caller criteria only; no standard comparator. | assessment_id, asset_id 외 14개 |
disposition, findings 외 1개 |
fabrication.surface_profile_deviation |
Exact caller-reviewed point pairing in one SI coordinate frame and unit outward normals. | asset_id, location_id 외 12개 |
coordinate_frame_id, reference_geometry_id 외 1개 |
fabrication.thermal_spray_condition |
System, process, feedstock lot, substrate condition and procedure identities are caller-reviewed. | assessment_id, asset_id 외 18개 |
assessment_id, coating_system_id 외 11개 |
fabrication.thermal_spray_cross_section_summary |
Caller-supplied thickness points and segmented pore areas share one calibrated field geometry. | summary_id, asset_id 외 19개 |
summary_id, physical_scope_id 외 4개 |
fabrication.thermal_spray_porosity_uncertainty |
Caller-segmented pixel areas are converted with reviewed pixel-area calibration evidence. | assessment_id, asset_id 외 20개 |
assessment_id, physical_scope_id 외 4개 |
fabrication.thermal_spray_thickness_uncertainty |
Repeated SI thickness measurements receive caller-provided additive calibration corrections. | assessment_id, asset_id 외 20개 |
assessment_id, physical_scope_id 외 4개 |
fabrication.thickness_budget |
Caller-declared manufacturing, forming, future corrosion and structural requirements with a separate measured path. | nominal_thickness_m, manufacturing_minus_tolerance_m 외 4개 |
minimum_supplied_thickness_m, minimum_formed_thickness_m 외 4개 |
fabrication.transport_erection |
Ordered item, lift, transport, storage, support and erection evidence is caller supplied. | assessment_id, asset_id 외 17개 |
report_schema_version, assessment_id 외 12개 |
fabrication.transport_erection_history |
Ordered handling, transport and erection activity intervals remain separate from metric observations, inspections and caller-owned l… | record_id, asset_id 외 15개 |
horizon_duration_s, represented_activity_duration_s 외 6개 |
fabrication.tube_bend_preform_thickness |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, tube_id 외 4개 |
tube_id, preform_wall_thickness_m 외 3개 |
fabrication.tube_bundle_integrity_evidence |
Exchanger, bundle, tube, row and physical location are exact caller-reviewed identities. | assessment_id, asset_id 외 27개 |
assessment_id, exchanger_id 외 12개 |
fabrication.tube_bundle_inventory |
Identified tube wall-loss and plugged-bore geometric inventory only; no tube capacity or leakage conclusion. | tubes |
total_tube_count, active_tube_count 외 3개 |
fabrication.tube_expansion_wall_reduction |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, tube_id 외 6개 |
tube_id, tubesheet_hole_id 외 6개 |
fabrication.unilateral_nonlinear_gasket_prony_joint_history |
Caller-authorized nonlinear generalized-Maxwell gasket curves and a nonlinear bolt curve are solved with compression-only contact at… | request_id, joint_id 외 18개 |
response_history.elapsed_time_s, response_history.compressive_strain 외 7개 |
fabrication.winterization_inventory |
Each interval uses constant ambient temperature, conductance, trace power and effective isobaric heat capacity. | case_id, fluid_id 외 19개 |
case_id, fluid_id 외 9개 |
fatigue · 피로·다축 경로·소성·수명 (77개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
fatigue.area_uniform_fibonacci_plane_grid |
Unoriented plane normals use midpoint-stratified positive-z coordinates with equal nominal solid-angle weights and a deterministic g… | grid_id, candidate_count 외 1개 |
candidate_count, azimuth_phase_rad 외 3개 |
fatigue.basquin |
Stress-range convention, constant amplitude, calibrated user coefficients; no endurance plateau. | stress_range_Pa, reference_range_Pa 외 2개 |
cycles_to_failure |
fatigue.carpinteri_spagnoli_finite_limit_screen |
Uses the quadratic combination of maximum plane-normal stress and weighted shear-vector amplitude on caller-supplied finite planes. | analysis_id, material_condition_id 외 20개 |
critical_plane_parameter_Pa, margin_to_axial_endurance_limit_Pa 외 2개 |
fatigue.carpinteri_spagnoli_life_dependent_curve |
Uses finite caller planes and same-condition axial/torsion S-N curves; curve strengths define the life-dependent shear weighting. | analysis_id, material_condition_id 외 25개 |
cycles_to_failure, plane_life_results[].cycles_to_failure |
fatigue.closed_tensor_work_life |
Caller-provided closed 3D stress-strain tensor cycles and material-matched work-life calibration with bounded log-log interpolation … | analysis_id, material_condition_id 외 23개 |
cycle_results[].signed_closed_loop_work_density_J_m3, cycle_results[].dissipated_energy_density_J_m3 외 4개 |
fatigue.continuous_plane_fs_life_bound |
Map a certified sampled-cycle continuous-plane FS factor interval to a conservative caller-calibrated cycle-life interval over decla… | analysis_id, factor_bound_result 외 6개 |
minimum_cycles_to_failure_bound, maximum_cycles_to_failure_bound 외 3개 |
fatigue.critical_plane_adaptive_search |
The caller supplies one reviewed closed local tensor cycle, one finite seed grid and an explicit tangent-ring refinement schedule. | history_id, material_condition_id 외 17개 |
seed_candidate_count, refinement_rounds 외 5개 |
fatigue.critical_plane_continuous_bound |
The caller supplies one reviewed closed local tensor cycle, calibrated Fatemi-Socie coefficient and normalization stress, plus expli… | history_id, material_condition_id 외 16개 |
sampled_maximum_fatemi_socie_factor, fatemi_socie_continuous_upper_bound 외 6개 |
fatigue.critical_plane_factors |
The caller supplies a reviewed closed representative local cycle as aligned symmetric Cauchy-stress and small-strain tensors, using … | history_id, material_condition_id 외 31개 |
sample_count, candidate_count 외 4개 |
fatigue.critical_plane_findley_calibrated_life |
Uses the independent finite-sample Findley parameter evaluator and an explicitly supplied, digest-bound monotone parameter-life curve. | stress_history, life_curve_provider_id 외 11개 |
governing_findley_parameter_Pa, cycles_to_failure 외 2개 |
fatigue.critical_plane_findley_parameter |
Uses the Findley critical-plane stress parameter with caller-supplied coefficient and reference strength; no coefficient, strength c… | assessment_id, asset_id 외 36개 |
stress_cycle_closure_error_Pa, stress_tensor_components_Pa[][] 외 12개 |
fatigue.critical_plane_fs_life |
Identified Fatemi-Socie factor mapped to caller-calibrated engineering-shear strain-life coefficients inside declared cycle support. | analysis_id, plane_id 외 10개 |
cycles_to_failure, reversals_to_failure |
fatigue.critical_plane_grid_family_comparison |
The caller supplies one reviewed closed local tensor cycle, at least two uniquely identified latitude-azimuth and/or area-stratified… | history_id, material_condition_id 외 14개 |
grid_count, evaluated_grid_count 외 2개 |
fatigue.critical_plane_grid_refinement |
The caller supplies one reviewed closed local tensor cycle, at least two explicitly ordered hemisphere grids and diagnostic factor-c… | history_id, material_condition_id 외 13개 |
refinement_level_count, evaluated_level_count 외 2개 |
fatigue.critical_plane_minimum_enclosing_circle_factors |
The caller supplies a reviewed closed local tensor cycle, tensor-shear components, finite orthonormal plane frames and qualified FS … | history_id, material_condition_id 외 31개 |
sample_count, candidate_count 외 4개 |
fatigue.critical_plane_piecewise_linear_time_history |
The caller supplies one timed, reviewed closed tensor cycle and explicitly declares piecewise-linear interpolation of the tensor com… | history, shear_range_method 외 3개 |
cycle_start_s, cycle_end_s 외 4개 |
fatigue.critical_plane_projected_rainflow |
The caller supplies ordered multiaxial stress/strain tensors, finite plane frames, explicit scalar projection choices, path boundary… | history_id, material_condition_id 외 14개 |
projection_cycle_results.projections.cycle_count_equivalents, projection_cycle_results.projections.cycles.range 외 4개 |
fatigue.critical_plane_time_refinement |
The caller supplies one reviewed cycle at two or more strictly increasing nested time samplings, a fixed finite plane set and explic… | history_id, material_condition_id 외 12개 |
candidate_count, refinement_level_count 외 3개 |
fatigue.critical_plane_vector_path_factors |
The caller supplies a reviewed closed representative local cycle as aligned symmetric Cauchy-stress and small-strain tensors, using … | history_id, material_condition_id 외 31개 |
sample_count, candidate_count 외 4개 |
fatigue.crossland_proportional_miner_campaign |
Each block is evaluated by the finite proportional Crossland screen and bounded same-condition caller life curve. | analysis_id, material_condition_id 외 15개 |
block_damage_ledger[].crossland_parameter_Pa, block_damage_ledger[].cycles_to_failure 외 3개 |
fatigue.cyclic_response_relative_error |
Caller-supplied observed/predicted mean and amplitude arrays share strict cycle alignment, explicit positive normalization and a pre… | series, mean_weight 외 1개 |
experiment_count, mean_weight 외 2개 |
fatigue.dang_van_finite_parameter_life |
Consumes only a digest-verified computed result from the named finite-sample Dang Van screen. | analysis_id, finite_screen_result 외 14개 |
dang_van_parameter_Pa, cycles_to_failure |
fatigue.dang_van_finite_sample_limit_screen |
Uses the published Dang Van high-cycle form combining centered shear stress history and instantaneous hydrostatic stress, restricted… | analysis_id, stress_history 외 16개 |
candidate_system_results[].time_weighted_mean_resolved_shear_Pa, candidate_system_results[].maximum_dang_van_parameter_Pa 외 4개 |
fatigue.dynamic_modulus_drop_endpoint |
Caller supplies a strictly ordered compressive-branch dynamic-modulus history, explicit reference modulus, loss threshold and closed… | test_id, cycle 외 5개 |
reference_dynamic_modulus_Pa, threshold_dynamic_modulus_Pa 외 3개 |
fatigue.explicit_critical_plane_cycle_pair_damage |
Caller-declared scalar normal/shear rainflow cycle allocations with calibrated Fatemi-Socie life and explicit Miner accumulation; no… | analysis_id, projected_rainflow_result 외 23개 |
total_miner_damage, pair_results[].miner_damage 외 2개 |
fatigue.goodman |
Tensile mean stress only; empirical correction needs material qualification. | alternating_stress_Pa, mean_stress_Pa 외 1개 |
equivalent_fully_reversed_amplitude_Pa |
fatigue.hemisphere_plane_grid |
Unoriented planes are sampled on a deterministic upper-hemisphere latitude-azimuth grid; exact pole and equatorial sign duplicates a… | grid_id, polar_divisions 외 1개 |
candidate_count, polar_divisions 외 3개 |
fatigue.hysteresis_path |
Ordered uniaxial stress-strain path with explicit cycle boundaries and closure quality. | stress_Pa, strain_fraction 외 4개 |
signed_recorded_path_work_J_m3, signed_closed_cycle_work_J_m3 외 2개 |
fatigue.ince_glinka_generalized_strain_amplitude |
One caller-declared closed stress/elastic-strain/plastic-strain tensor cycle. | assessment_id, physical_scope_id 외 23개 |
maximum_gsa_parameter, candidate_planes[].gsa_parameter |
fatigue.ince_glinka_gsa_life_from_curve |
One caller-reviewed repeated closed tensor cycle evaluated over the finite supplied plane set. | calculation, calibration_id 외 6개 |
gsa_parameter, cycles_to_failure 외 1개 |
fatigue.ince_glinka_gsa_miner_campaign |
Each declared cycle group reuses the existing caller-input finite-plane Ince–Glinka parameter and caller-monotone GSA-to-life curve;… | campaign_id, cycle_groups 외 6개 |
cycle_groups[].allocated_cycle_count, cycle_group_results[].life_result.values.gsa_parameter 외 3개 |
fatigue.itoh_nonproportional_miner_blocks |
Caller-decomposed blocks each use a distinct closed Itoh strain cycle and a same-condition digest-pinned strain-life curve. | analysis_id, asset_id 외 11개 |
block_damage_ledger[].caller_cycle_count, block_damage_ledger[].itoh_nonproportional_strain_range 외 4개 |
fatigue.itoh_nonproportional_strain_life |
A finite sampled Itoh non-proportional strain parameter is recomputed from the nested pinned history. | analysis_id, parameter_request 외 13개 |
itoh_strain_range, cycles_to_failure |
fatigue.itoh_nonproportional_strain_parameter |
The evaluated factor is a trapezoidal approximation over the caller-provided samples and clocks for one exactly closed cycle. | analysis_id, material_condition_id 외 24개 |
nonproportional_factor_sampled_trapezoid, hardening_coefficient_alpha 외 2개 |
fatigue.j2_armstrong_frederick_strain_history |
Uses a small-strain associative J2 yield surface and one backward-Euler Armstrong-Frederick backstress update per caller strain inte… | analysis_id, base_path 외 8개 |
response_history[].stress_tensor_components_Pa, response_history[].plastic_strain_tensor_components 외 5개 |
fatigue.j2_prager_strain_history |
Six-component tensors use [xx, yy, zz, xy, yz, zx] order with tensor shear strain coordinates. | analysis_id, material_condition_id 외 18개 |
response_history[].stress_tensor_components_Pa, response_history[].plastic_strain_tensor_components 외 6개 |
fatigue.life_rmsle |
Caller supplies one positive observed and predicted life for every unique predeclared case; censoring is outside this metric. | case_id, observed_cycles 외 2개 |
case_count, root_mean_square_log_error |
fatigue.mcdiarmid_calibrated_miner_campaign |
Blocks consume computed McDiarmid finite-plane indices from one physical scope, asset and location. | assessment_id, blocks 외 7개 |
block_results[].criterion_index, block_results[].cycles_to_failure_from_caller_curve 외 8개 |
fatigue.miner |
Linear accumulation omits load sequence and damage interaction; limit is explicitly declared. | cycle_counts, cycles_to_failure 외 1개 |
damage, damage_margin 외 1개 |
fatigue.morrow_strain_life |
Caller-calibrated uniaxial Morrow mean-stress correction to the elastic Basquin term of a strain-life relation. | strain_amplitude, mean_stress_Pa 외 10개 |
cycles_to_failure, reversals_to_failure 외 2개 |
fatigue.multiaxial_calibration_transfer_audit |
Only exact caller-paired parameter levels and caller-normalized positive weights are summarized. | assessment_id, physical_scope_id 외 14개 |
paired_points[].parameter_value, paired_points[].reference_cycles 외 5개 |
fatigue.multiaxial_crossland_proportional_limit_screen |
Uses the maximum sampled hydrostatic stress and half-range of the collinear deviatoric path coordinate. | analysis_id, stress_history 외 13개 |
sqrt_J2_stress_amplitude_Pa, maximum_hydrostatic_stress_Pa 외 3개 |
fatigue.multiaxial_deviatoric_stress_path_variation |
Finite path variation is the sum of adjacent-sample increments; deviatoric increments use sqrt(J2) distance. | analysis_id, stress_history 외 4개 |
deviatoric_path_variation_Pa, hydrostatic_path_variation_Pa 외 4개 |
fatigue.multiaxial_invariant_limit_screen |
Requires caller-reviewed coefficients, reference limit, calibration lineage and exact material-condition match; it does not estimate… | analysis_id, stress_history 외 12개 |
screening_parameter_Pa, margin_to_caller_limit_Pa |
fatigue.multiaxial_life_campaign |
Closed caller local tensor cycle to supplied sampled planes and same-condition FS/SWT or caller shear-normal calibration; preserve t… | campaign_id, history 외 7개 |
— |
fatigue.multiaxial_life_scenario_envelope |
The envelope consumes only digest-pinned computed results from the registered multiaxial critical-plane life campaign. | assessment_id, asset_id 외 14개 |
minimum_cycles_to_failure, maximum_cycles_to_failure |
fatigue.multiaxial_mcdiarmid_finite_plane_limit_screen |
Every plane is evaluated from the caller finite stress sample set, with its sampled shear-traction path and maximum normal stress. | assessment_id, physical_scope_id 외 20개 |
plane_results[].maximum_shear_range_Pa, plane_results[].shear_amplitude_Pa 외 5개 |
fatigue.multiaxial_power_law_life_transfer |
A positive weighted log-linear relation between paired target and reference lives is fit at the exact fatigue parameter knots in a d… | assessment_id, paired_calibration_audit 외 18개 |
reference_curve_points[].parameter_value, reference_curve_points[].reference_cycles 외 7개 |
fatigue.multiaxial_principal_stress_axis_rotation |
The six supplied components form symmetric stress tensors in [xx, yy, zz, xy, yz, zx] order. | analysis_id, source_id 외 7개 |
total_axis_rotation_rad, total_axis_rotation_deg 외 2개 |
fatigue.multiaxial_sampled_shear_path_area |
Uses caller-ordered finite samples and caller-reviewed shear axes on one selected material plane. | analysis_id, source_id 외 9개 |
signed_area, absolute_area 외 1개 |
fatigue.multiaxial_sines_life_fit |
Fits a single log-log power relation by unweighted ordinary least squares to caller-declared uncensored failures. | campaign_id, material_condition_id 외 5개 |
fitted_log_cycles_intercept_at_reference_parameter, fitted_loglog_exponent 외 6개 |
fatigue.multiaxial_sines_mean_limit_screen |
Uses caller-specified coefficients, limit and same-material calibration Evidence; no constants are inferred. | analysis_id, stress_history 외 13개 |
screening_parameter_Pa, mean_hydrostatic_stress_Pa 외 2개 |
fatigue.multiaxial_sines_parameter_life |
Uses a caller Sines-style finite-sample parameter screen and a same-material-condition caller life curve. | analysis_id, screen 외 8개 |
screening_parameter_Pa, cycles_to_failure 외 1개 |
fatigue.multiaxial_weighted_life_scenario_moments |
Compute descriptive weighted moments over complete digest-pinned multiaxial fatigue life scenarios with caller-supplied ordered weig… | scenario_envelope, scenario_weights 외 17개 |
weighted_mean_cycles_to_failure, weighted_population_variance_cycles2 외 10개 |
fatigue.neuber_notch_strain_amplitude |
Caller-reviewed scalar uniaxial nominal stress amplitude, elastic concentration factor, modulus and stabilized cyclic Ramberg–Osgood… | nominal_stress_amplitude_Pa, elastic_stress_concentration_factor 외 6개 |
local_stress_amplitude_Pa, local_strain_amplitude 외 7개 |
fatigue.neuber_strain_life_chain |
Runs the reviewed scalar stabilized notch-root estimate first, then evaluates the local strain amplitude with caller-supplied strain… | notch, fatigue_strength_coefficient_Pa 외 5개 |
local_stress_amplitude_Pa, local_strain_amplitude 외 10개 |
fatigue.papadopoulos_p1_calibrated_life |
P1 parameter is computed from a separately reviewed finite orientation quadrature and closed sampled stress cycle. | analysis_id, p1_request 외 10개 |
p1_parameter_Pa, cycles_to_failure |
fatigue.papadopoulos_p1_calibration |
Uses caller-supplied fully reversed axial and torsional endurance limits from a matched material condition and smooth-specimen basis. | calibration_id, material_condition_id 외 12개 |
hydrostatic_coefficient, fully_reversed_torsional_limit_Pa |
fatigue.papadopoulos_p1_finite_integral_screen |
The integral criterion is approximated by caller-declared finite orientation quadrature; weights must sum to one. | analysis_id, material_condition_id 외 19개 |
weighted_generalized_shear_amplitude_Pa, maximum_sampled_hydrostatic_stress_Pa 외 2개 |
fatigue.papadopoulos_p1_miner_blocks |
Caller supplies cycle blocks, repetitions, closed stress-cycle histories and the common material condition. | analysis_id, material_condition_id 외 12개 |
block_damage_ledger[].miner_damage_fraction, cumulative_miner_damage |
fatigue.papadopoulos_p2_finite_sample_limit_screen |
The Papadopoulos P2 structure combines a critical-plane generalized shear amplitude with maximum hydrostatic stress; the implementat… | analysis_id, stress_history 외 14개 |
hydrostatic_maximum_Pa, plane_results[].generalized_shear_amplitude_Pa 외 4개 |
fatigue.periodic_fourier_tensor_work |
Stress and strain use the same ordered closed tensor cycle and a caller-declared tensor or engineering shear convention. | analysis_id, material_condition_id 외 13개 |
signed_work_density_J_m3, component_work_density_J_m3 |
fatigue.periodic_fourier_tensor_work_life |
Each cycle's work is exact only for its declared full-bandwidth periodic trigonometric interpolant. | analysis_id, material_condition_id 외 14개 |
cycle_damage_ledger[].absolute_work_density_J_m3, cycle_damage_ledger[].cycles_to_failure 외 2개 |
fatigue.periodic_tensor_fourier_rates |
Returns analytic derivatives with respect to physical time of the full-bandwidth real Fourier interpolants. | analysis_id, material_condition_id 외 16개 |
evaluation_points[].stress_rate_tensor_components_Pa_s, evaluation_points[].strain_rate_tensor_components_s_inv |
fatigue.periodic_tensor_fourier_reconstruction |
Uses full-bandwidth trigonometric interpolation on a uniformly sampled, exactly closed periodic tensor cycle. | analysis_id, material_condition_id 외 14개 |
evaluation_points[].stress_tensor_components_Pa, evaluation_points[].strain_tensor_components 외 1개 |
fatigue.pressure_loss_endpoint |
The caller supplies a reviewed pressure-drop threshold, event origin, physical-specimen continuity, load-case identity and valid-cyc… | segments, initial_pressure_Pa 외 9개 |
cumulative_valid_cycles, pressure_drop_fraction 외 4개 |
fatigue.pressurized_annulus_load_state |
Long homogeneous isotropic linear-elastic annulus with static pressure, nominal axial force and Saint-Venant torsion; end, notch, fi… | reference_section_id, load_case_id 외 11개 |
reference_area_m2, polar_second_moment_m4 외 13개 |
fatigue.propose_critical_plane_interval_overlap_pairing |
Deterministic continuous-capacity bipartite min-cost max-flow proposal over overlapping sample-index intervals; maximize paired cycl… | projected_rainflow_result, projected_rainflow_result_sha256 외 8개 |
pairings[].allocated_cycle_count, pairings[].interval_intersection_over_union 외 4개 |
fatigue.rainflow |
Uses the installed rainflow library; output range unit matches input, residual excursions remain half cycles. | values, quantity_unit |
cycle_count |
fatigue.sampled_stress_invariant_history |
Only caller-reviewed, exactly closed finite samples in the declared symmetric tensor basis are summarized. | analysis_id, material_condition_id 외 9개 |
values.maximum_sampled_hydrostatic_stress_Pa, values.sampled_deviatoric_J2_metric_diameter_Pa 외 1개 |
fatigue.sampled_tensor_stress_strain_work_cycle |
Stress and strain tensors must share a caller-reviewed conjugate basis, sign convention and exactly closed sample order. | analysis_id, material_condition_id 외 14개 |
signed_net_work_density_J_m3 |
fatigue.strain_life |
Combined Basquin and Coffin-Manson relation; two reversals per cycle and an explicit calibration interval. | strain_amplitude, elastic_modulus_Pa 외 6개 |
cycles_to_failure, reversals_to_failure |
fatigue.strain_life_campaign |
Explicit fully reversed, Morrow or SWT blocks with caller-reviewed linear cycle-fraction accumulation; constituent failures withhold… | campaign_id, material_condition_id 외 4개 |
total_linear_damage |
fatigue.swt_strain_life |
Caller-calibrated uniaxial Smith-Watson-Topper stress-strain parameter for a declared cycle-life interval. | strain_amplitude, maximum_stress_Pa 외 9개 |
cycles_to_failure, reversals_to_failure 외 1개 |
fatigue.wang_brown_parameter_life_fit |
A log-log power law is estimated by ordinary least squares from at least three distinct caller test levels. | analysis_id, parameter_result 외 14개 |
parameter_value, cycles_to_failure |
fatigue.wang_brown_reviewed_excursion_parameter |
Evaluates a finite-plane Wang-Brown-style parameter using explicitly reviewed shear-reversal endpoints and the normal-strain excursi… | analysis_id, material_condition_id 외 16개 |
candidate_plane_results[].engineering_shear_range, candidate_plane_results[].shear_strain_amplitude 외 3개 |
fatigue.wang_brown_temporal_normal_excursion |
The shear cycle sequence is caller-counted; normal-strain samples are associated by the cycle's inclusive sample-index interval. | analysis_id, projected_rainflow_result 외 9개 |
cycles.normal_strain_minimum, cycles.normal_strain_maximum 외 2개 |
flow · 사용자 계약·계산 기능 (2개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
flow.declared_inverse_sqrt_density_velocity |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, physical_scope_id 외 4개 |
velocity_descriptor_m_s |
flow.homogeneous_no_slip_mixture_density |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, physical_scope_id 외 2개 |
mixture_density_kg_m3, total_mass_flow_kg_s 외 1개 |
fracture · 균열·응력확대계수·파괴역학 (11개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
fracture.paris_constant_amplitude |
Constant stress range and geometry factor; Paris region only, no initiation, closure, threshold or toughness termination inference. | initial_depth_m, terminal_depth_m 외 4개 |
cycles_to_terminal_depth, initial_delta_K_Pa_sqrt_m 외 1개 |
fracture.sequence_zone_memory |
Caller-calibrated opening ratio and plastic-zone memory with explicit whole-cycle stepping, state checkpoints, and distinct fracture… | growth, yield_strength_Pa 외 8개 |
completed_cycles, completed_cycles_this_run 외 3개 |
fracture.stress_intensity |
Mode-I LEFM and constant user geometry factor; plastic collapse and crack interaction excluded. | crack_depth_m, tensile_stress_Pa 외 2개 |
stress_intensity_Pa_sqrt_m, toughness_margin_Pa_sqrt_m 외 1개 |
fracture.tabulated_crack_growth |
Caller-authorized tabulated da/dN curve, explicitly matched and reviewed target material/environment, reviewed nondecreasing geometr… | assessment_id, physical_scope_id 외 18개 |
final_depth_m, cycles_evaluated 외 1개 |
fracture.tabulated_crack_growth_scenario_ensemble |
Caller-reviewed weighted complete inputs for the single-curve or curve-family deterministic model preserve joint variation in curve … | ensemble_run_id, distribution_definition_id 외 9개 |
scenario_count, weight_sum 외 4개 |
fracture.tabulated_crack_growth_scenario_reduction |
Portable reduction of externally evaluated complete crack-growth scenarios with exact manifest coverage, input digests and one evalu… | ensemble_run_id, distribution_definition_id 외 12개 |
scenario_count, weight_sum 외 4개 |
fracture.tabulated_crack_growth_uncertainty |
Caller-supplied normalized joint uncertainty rows multiply curve rates, geometry factors, tensile stresses and toughness while prese… | uncertainty_run_id, distribution_definition_id 외 12개 |
sample_count, weight_sum 외 4개 |
fracture.tabulated_crack_growth_uncertainty_convergence |
Two or more caller-reviewed uncertainty designs for one distribution and deterministic crack-growth input, with explicit nested, ref… | convergence_run_id, distribution_definition_id 외 16개 |
level_count, final_weighted_mean_depth_m 외 2개 |
fracture.tabulated_curve_family_growth |
Caller-reviewed curve family explicitly matched to the assessment target material/environment; each block selects one curve by expli… | assessment_id, physical_scope_id 외 16개 |
final_depth_m, cycles_evaluated 외 1개 |
fracture.tabulated_growth_rate |
Caller-authorized positive crack-growth points with strictly increasing delta K; log-log interpolation is confined to the supplied s… | curve, query_delta_k_Pa_sqrt_m |
query_results |
fracture.variable_paris |
Ordered tensile blocks with explicit Paris calibration, threshold, toughness and bounded geometry provider. | initial_depth_m, terminal_depth_m 외 14개 |
final_depth_m, cycles_evaluated 외 1개 |
geometry · 형상·손실 프로파일·공간 자료 (2개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
geometry.rectilinear_thickness_map |
Cell edges define a rectilinear map in metres and matrix entries are cell-centred thicknesses in metres. | x_cell_edges_m, y_cell_edges_m 외 5개 |
minimum_observed_thickness_m, maximum_observed_thickness_m 외 12개 |
geometry.thickness_grid |
Equal-area cell observations with explicit missing coverage; reporting threshold is caller supplied. | cell_thickness_m, cell_size_x_m 외 3개 |
minimum_measured_thickness_m, mean_measured_thickness_m 외 5개 |
inspection · 검사·영상·관측·품질·절차 (75개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
inspection.acoustic_emission_arrival_localization |
Multi-sensor arrival-time localization in one reviewed frame with fixed caller-supplied wave speed. | assessment_id, asset_id 외 21개 |
assessment_id, coordinate_frame_id 외 4개 |
inspection.acoustic_emission_arrival_pick |
Caller-reviewed monotonic sample clock, waveform unit, immutable waveform digest and fixed windows. | pick_id, asset_id 외 27개 |
pick_id, acquisition_id 외 12개 |
inspection.acoustic_emission_campaign |
Asset geometry, zones, sensors, channels, acquisition intervals and event features are reviewed caller records. | campaign_id, asset_id 외 17개 |
campaign_id, valid_acquisition_duration_s 외 8개 |
inspection.acoustic_emission_campaign_quality |
Array, coupling, acquisition, baseline, observation and reference identities are caller supplied. | assessment_id, asset_id 외 20개 |
report_schema_version, assessment_id 외 13개 |
inspection.acoustic_emission_wave_speed_calibration |
Weighted linear calibration of arrival minus known emission time against known source-sensor distance. | calibration_id, asset_id 외 18개 |
calibration_id, wave_speed_m_s 외 10개 |
inspection.action_expected_loss |
One event, physical scope, horizon, survival conditioning and cost basis; every complete action retains an externally evaluated resi… | comparison_id, asset_id 외 19개 |
horizon_start_s, horizon_end_s 외 4개 |
inspection.binomial_evidence |
Independent homogeneous inspection opportunities with explicit detection/false-call semantics. | opportunities, positive_responses 외 3개 |
probability_estimate, one_sided_lower_probability 외 2개 |
inspection.blind_indicator_hole_ligament |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, component_id 외 6개 |
component_id, physical_location_id 외 6개 |
inspection.boil_off_calorimetry |
Isobaric saturated liquid bath; explicitly declared level/makeup mode and negligible unmodelled energy terms. | saturation_state, escaping_vapor_mass_flow_kg_s 외 7개 |
liquid_to_vapor_mass_rate_kg_s, vapor_accumulation_mass_rate_kg_s 외 11개 |
inspection.coupling_pressure |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, outside_diameter_m 외 3개 |
coupling_pressure_Pa |
inspection.cryogenic_leak_test_evidence |
Cycle temperature and pressure extrema, medium identity and pressure basis are reviewed caller records. | assessment_id, asset_id 외 17개 |
assessment_id, test_article_id 외 11개 |
inspection.cryogenic_leak_testing_campaign_quality |
Reference, blank/background, state, repeatability, drift and capability evidence is caller supplied. | assessment_id, asset_id 외 26개 |
assessment_id, campaign_id 외 14개 |
inspection.declared_impact_subsize_requirements |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, method_id 외 10개 |
method_id, material_condition_id 외 8개 |
inspection.disposition_decision_tree |
One reviewed exhaustive mutually exclusive inspection-outcome partition over one event context; each branch supplies its probability… | tree_id, asset_id 외 28개 |
horizon_start_s, horizon_end_s 외 5개 |
inspection.eddy_current_acquisition_summary |
Caller-controlled probe, reference standard, electromagnetic properties, encoded scan and indication record; no embedded detection o… | examination_id, procedure_id 외 18개 |
scan_geometry_by_id, skin_depth_m_by_frequency_Hz |
inspection.eddy_current_campaign_quality |
Probe/sensor, magnetizer, excitation, lift-off, speed, channel and scan identities are caller supplied. | assessment_id, asset_id 외 22개 |
report_schema_version, assessment_id 외 13개 |
inspection.file_homogeneous_fmc_tfm |
Numeric NPY storage, dtype, complete ordered-pair row manifest and a common sample clock are explicit and digest-bound. | basis, acquisition_id 외 21개 |
image[].position_m, image[].coherent_amplitude 외 3개 |
inspection.file_planar_multiview_fmc_tfm |
Numeric NPY storage, dtype, complete ordered-pair row manifest and a common sample clock are explicit and digest-bound. | basis, acquisition_id 외 33개 |
views[].image[].position_m, views[].image[].coherent_amplitude 외 3개 |
inspection.finite_policy_path_generation |
Reviewed finite state, initial, observation, fixed decision-rule and transition tables over ordered epochs; enumerate every positive… | generation_id, generator_configuration_sha256 외 28개 |
horizon_start_s, horizon_end_s 외 2개 |
inspection.finite_policy_probability_calibration |
Reviewed finite physical-state truth, inspection labels and action-conditioned longitudinal transitions with immutable, sequence- an… | calibration_id, states 외 12개 |
probability_given_state, probability_given_state_and_action 외 2개 |
inspection.flux_leakage_campaign_quality |
Probe/sensor, magnetizer, excitation, lift-off, speed, channel and scan identities are caller supplied. | assessment_id, asset_id 외 22개 |
report_schema_version, assessment_id 외 13개 |
inspection.fracture_toughness_test_evidence |
Every record preserves material condition, specimen/source identity, geometry/orientation, test conditions, endpoint, unit and calle… | evidence_collection_id, asset_id 외 11개 |
evidence_collection_id, record_count 외 13개 |
inspection.fracture_toughness_testing |
Specimen, geometry, orientation, precrack, loading, result, uncertainty and provenance remain caller evidence. | assessment_id, asset_id 외 14개 |
report_schema_version, assessment_id 외 12개 |
inspection.gas_expansion_energy |
Ideal reversible adiabatic gas expansion; not a blast model or exclusion-distance determination. | initial_absolute_pressure_Pa, final_absolute_pressure_Pa 외 2개 |
ideal_expansion_work_J, final_volume_m3 |
inspection.gas_pressure_decay |
Known compressibility at both equilibrated endpoints and an explicit reporting reference state. | rigid_volume_m3, initial_absolute_pressure_Pa 외 14개 |
net_molar_outflow_mol_s, reference_volume_outflow_m3_s 외 4개 |
inspection.guided_wave_pair_features |
One physical specimen, aligned provider distance grids and one declared spatial window; paired descriptors do not separate environme… | specimen_id, baseline_acquisition_id 외 11개 |
frequency_Hz, window_start_m 외 10개 |
inspection.guided_wave_reference_ensemble |
At least three explicitly selected same-specimen baseline acquisitions, one aligned observation and one spatial window; ensemble des… | specimen_id, baseline_acquisition_ids 외 15개 |
frequency_Hz, window_start_m 외 17개 |
inspection.guided_waves_campaign_quality |
Array, coupling, acquisition, baseline, observation and reference identities are caller supplied. | assessment_id, asset_id 외 20개 |
report_schema_version, assessment_id 외 13개 |
inspection.hardness_reference_block_calibration |
One exact method, scale, indenter, load, dwell and instrument configuration is calibrated. | calibration_id, asset_id 외 28개 |
calibration_id, physical_scope_id 외 13개 |
inspection.hardness_testing_campaign |
Subject, material, heat, method, scale, load, dwell, indenter, reference block and instrument identities are exact caller inputs. | assessment_id, asset_id 외 16개 |
assessment_id, campaign_id 외 9개 |
inspection.hit_miss_pod |
Increasing logistic POD in log flaw size, independent hit/miss observations and profile-likelihood confidence inference. | specimen_ids, flaw_size_m 외 6개 |
target_size_estimate_m, target_size_upper_confidence_m 외 6개 |
inspection.homogeneous_fmc_tfm |
All element and image coordinates share the explicit reviewed frame and material condition. | basis, acquisition_id 외 20개 |
image[].position_m, image[].coherent_amplitude 외 1개 |
inspection.hot_tap_branch_test_pressure_cap |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, host_component_id 외 7개 |
host_component_id, branch_component_id 외 8개 |
inspection.impact_metric_crossings |
One reviewed common material/geometry/orientation series, explicit point statistic, native SI/fraction metric and caller target. | basis, series_id 외 10개 |
series_id, metric 외 15개 |
inspection.impact_testing_campaign |
Specimen, product, heat, orientation, notch, size, machine, striker and calibration identities are exact caller inputs. | assessment_id, asset_id 외 14개 |
assessment_id, campaign_id 외 10개 |
inspection.indication_window_accumulation |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, physical_scope_id 외 9개 |
physical_scope_id, coordinate_frame_id 외 9개 |
inspection.instrumented_impact_signal_summary |
The supplied signal is calibrated SI force, displacement and time with a reviewed sign convention and valid window. | assessment_id, asset_id 외 32개 |
assessment_id, asset_id 외 19개 |
inspection.known_volume_pressure_rise |
Rigid known volume, absolute pressure, one reviewed clock and independent blank/test source groups. | assessment_id, asset_id 외 20개 |
assessment_id, apparatus_id 외 11개 |
inspection.leak_rate_campaign_quality |
Reference, blank/background, state, repeatability, drift and capability evidence is caller supplied. | assessment_id, asset_id 외 26개 |
assessment_id, campaign_id 외 14개 |
inspection.liquid_penetrant_summary |
Caller-controlled material, consumables, sequence, temperature, time, lighting, coverage and indication records; no embedded accepta… | examination_id, procedure_id 외 28개 |
target_area_m2, examined_area_m2 외 7개 |
inspection.logistic_pod |
User-calibrated log-size logistic curve; false calls and confidence bounds are separate. | flaw_size_m, midpoint_size_m 외 1개 |
probability_of_detection |
inspection.lot_sampling_escalation |
Explicit physical population and caller-authorized sample/escalation plan for one method and criterion. | asset_id, location_id 외 12개 |
lot_id, method_id 외 14개 |
inspection.magnetic_flux_leakage_acquisition_summary |
Caller-controlled magnetizer, sensor array, field-state checkpoint, reference-standard, encoded-scan and indication record; no embed… | examination_id, procedure_id 외 21개 |
scan_geometry_by_id, magnetic_field_checkpoints |
inspection.magnetic_particle_summary |
Caller-reviewed ferromagnetic applicability, media, equipment, field adequacy, directional requirement, coverage and indication reco… | examination_id, procedure_id 외 21개 |
target_area_m2, examined_area_m2 외 6개 |
inspection.multi_period_policy_comparison |
At least two complete externally evaluated policies over one common event, scope, horizon, start-survival condition, cost and discou… | comparison_id, asset_id 외 21개 |
horizon_start_s, horizon_end_s 외 5개 |
inspection.multi_period_policy_evaluation |
One complete caller-reviewed finite policy-path ensemble over a common event, scope, horizon, start-survival condition, cost and dis… | evaluation_id, policy_id 외 28개 |
horizon_start_s, horizon_end_s 외 6개 |
inspection.no_indication_update |
POD conditional on each prior bin; random independent coverage and no false indication mechanism. | prior_weights, probabilities_of_detection 외 1개 |
posterior_weights, probability_of_no_indication |
inspection.phased_array_acquisition_summary |
Caller-controlled probe, wedge, material velocity, beam-law, encoder, frame and indication record; no embedded reconstruction or acc… | examination_id, procedure_id 외 22개 |
probe_geometry_by_id, beam_law_delay_span_by_id 외 3개 |
inspection.phased_array_campaign_quality |
Procedure, acquisition, reference standard, coverage and encoded-data identities are caller supplied. | assessment_id, asset_id 외 19개 |
report_schema_version, assessment_id 외 13개 |
inspection.pipe_membrane_test_pressure |
Caller provides the applicable material yield strength, factor and its review basis. | outside_diameter_m, wall_thickness_m 외 4개 |
membrane_test_pressure_difference_Pa, declared_membrane_stress_Pa |
inspection.planar_multiview_fmc_tfm |
Elements and image points occupy opposite sides of one explicit planar interface in the reviewed common coordinate frame. | basis, acquisition_id 외 32개 |
views[].image[].position_m, views[].image[].coherent_amplitude 외 4개 |
inspection.pressure_test_eligibility |
Test method, medium, pressure basis and component/material identities are caller-reviewed. | assessment_id, asset_id 외 23개 |
assessment_id, physical_scope_id 외 7개 |
inspection.pressure_test_load |
User-selected factor and allowables; no automatic standard eligibility or test approval. | design_pressure_Pa, declared_test_factor 외 4개 |
reference_test_pressure_Pa, local_test_pressure_Pa |
inspection.pulse_echo_sound_speed_fit |
Fixed reviewed time zero and incidence angle; through-origin least squares on independently measured reference thicknesses; conditio… | calibration_id, material_id 외 14개 |
temperature_K, sound_speed_m_s 외 9개 |
inspection.radiographic_geometry_summary |
Caller-controlled radiographic source, exposure, detector, image, IQI, projection geometry and indication record; no embedded accept… | examination_id, procedure_id 외 33개 |
exposure_time_s, nominal_object_thickness_m 외 4개 |
inspection.radiography_campaign_quality |
Procedure, acquisition, reference standard, coverage and encoded-data identities are caller supplied. | assessment_id, asset_id 외 19개 |
report_schema_version, assessment_id 외 13개 |
inspection.reference_energy_mass |
Caller supplies the reference identity, specific energy in J/kg and the physical basis of input energy. | energy_J, reference_specific_energy_J_kg 외 2개 |
reference_equivalent_mass_kg |
inspection.reference_leak_response_calibration |
Only valid detected rows with positive traceable molar leak rate and response enter the fit. | calibration_id, asset_id 외 31개 |
calibration_id, asset_id 외 17개 |
inspection.replica_feature_density_summary |
Frame calibration, SI scale and uncertainty are caller-reviewed and traceable. | assessment_id, asset_id 외 21개 |
assessment_id, component_id 외 6개 |
inspection.replica_metallography_campaign |
Component, location, material, heat and ordered service history are exact caller inputs. | assessment_id, asset_id 외 17개 |
assessment_id, campaign_id 외 10개 |
inspection.replica_metallography_evidence |
Replica sites and physical source groups retain caller-reviewed mappings. | assessment_id, asset_id 외 17개 |
assessment_id, component_id 외 13개 |
inspection.signal_response_pod_calibration |
Signal is linear in natural-log flaw size with independent normal residuals and caller weights. | calibration_id, asset_id 외 19개 |
calibration_id, physical_scope_id 외 11개 |
inspection.surface_profile_roughness |
Caller-reviewed filtered profile and evaluation direction; explicitly piecewise-linear positions/heights with a length-weighted mean… | asset_id, location_id 외 11개 |
profile_id, physical_specimen_id 외 10개 |
inspection.tensile_offset_yield_campaign |
Specimen, product, heat, orientation, geometry, machine, load-cell and extensometer identities are exact caller inputs. | assessment_id, asset_id 외 15개 |
assessment_id, campaign_id 외 9개 |
inspection.tensile_offset_yield_curve |
The supplied curve is a reviewed monotonic engineering-strain loading branch inside a pre-necking analysis window. | assessment_id, asset_id 외 36개 |
assessment_id, asset_id 외 16개 |
inspection.test_water_quality |
Source, batch, circuit, contact, history, sampling, laboratory and exact analytical identities are preserved. | assessment_id, asset_id 외 15개 |
report_schema_version, assessment_id 외 12개 |
inspection.test_water_quality_summary |
Samples retain explicit location, time, method and evidence identities on one reviewed test clock. | record_id, test_id 외 15개 |
record_id, coverage 외 7개 |
inspection.thread_connection_pressure |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, outside_diameter_m 외 5개 |
connection_pressure_resistance_Pa |
inspection.threshold_inspection_schedule |
Caller-reviewed cumulative first-crossing probabilities on strictly ordered candidate times; select the latest supplied candidate wi… | schedule_id, asset_id 외 20개 |
assessment_time_s, maximum_probability_before_inspection 외 13개 |
inspection.tofd_acquisition_summary |
Caller-controlled TOFD probe pair, velocity, wall, encoder, frame, time-pick and indication record; symmetric straight paths only. | examination_id, procedure_id 외 24개 |
direct_lateral_path_length_m, declared_wall_backwall_path_length_m 외 6개 |
inspection.tofd_depth |
Straight longitudinal paths in a homogeneous flat section and a centred tip. | probe_index_separation_m, longitudinal_sound_speed_m_s 외 2개 |
tip_depth_m, remaining_backwall_ligament_m |
inspection.ultrasonic_thickness |
Single homogeneous sound path and declared refracted angle; coating and mode conversion excluded. | round_trip_time_s, sound_speed_m_s 외 2개 |
thickness_m |
inspection.vacuum_rise |
Isothermal pressure rise with declared background gas load; no material leak limit bundled. | rigid_volume_m3, initial_absolute_pressure_Pa 외 4개 |
total_gas_load_Pa_m3_s, background_corrected_throughput_Pa_m3_s |
inspection.vacuum_testing_campaign_quality |
Reference, blank/background, state, repeatability, drift and capability evidence is caller supplied. | assessment_id, asset_id 외 26개 |
assessment_id, campaign_id 외 14개 |
inspection.visual_surface_summary |
Caller-defined mutually exclusive target areas, reviewed coverage and surface condition, traceable procedure and indication mapping;… | examination_id, procedure_id 외 14개 |
target_area_m2, examined_area_m2 외 4개 |
integration · 여러 계산 단계의 증거 기반 연결 (138개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
integration.adaptive_cycle_block_damage |
The caller supplies a deterministic provider whose identity, revision and configuration digest match the request. | analysis_id, physical_scope_id 외 31개 |
completed_integer_cycle_count, final_damage 외 2개 |
integration.aqueous_bdot_speciation_history |
Each exact time knot carries a complete caller-reviewed mass-action system and B-dot parameter record matched to that knot's tempera… | history_id, asset_id 외 9개 |
elapsed_time_s[], temperature_K[] 외 3개 |
integration.aqueous_candidate_network_speciation |
Only the exact computed mass-action system assembled by a digest-pinned candidate workflow is passed to the established aqueous spec… | assessment_id, candidate_workflow_result 외 2개 |
temperature_K, speciation.species[].dimensionless_activity 외 1개 |
integration.aqueous_candidate_network_workflow |
A caller-defined closed candidate species inventory and formula/charge set is screened with explicit search budgets. | workflow_id, enumeration 외 2개 |
candidate_reaction_count, reaction_count |
integration.aqueous_external_activity_speciation_history |
Every exact time knot carries a separately reviewed mass-action system and caller-owned composition-dependent activity provider record. | history_id, asset_id 외 9개 |
elapsed_time_s[], temperature_K[] 외 3개 |
integration.aqueous_mass_action_cycle_audit |
The existing mass-action species, formulas, charges, reaction direction, log10(K), temperature and standard state are reused without… | adapter_id, system 외 6개 |
temperature_K, cycle_audit.reaction_balance[].charge_balance_residual 외 2개 |
integration.aqueous_mass_action_to_crevice_nernst_history |
Only dimensionless activities and exact time/temperature knots from a computed digest-pinned crevice mass-action or B-dot speciation… | assessment_id, mass_action_history_result 외 21개 |
source_inventory_sha256, elapsed_time_s 외 7개 |
integration.aqueous_mass_action_vant_hoff_history |
Integrate the van't Hoff relation with caller-supplied reference reaction enthalpy, then solve the existing single-phase aqueous mas… | history_id, reference_temperature_K 외 14개 |
times_s, temperatures_K 외 6개 |
integration.aqueous_saturation_to_surface_scale_kinetics |
Transfers one caller-selected solid saturation-ratio history from exact digest-pinned aqueous equilibrium knots to an explicit singl… | assessment_id, saturation_history 외 5개 |
temperature_K, scale_history[].temperature_K 외 3개 |
integration.aqueous_vant_hoff_saturation_events |
Extract one explicitly selected solid from every exact computed knot of a digest-pinned aqueous van't Hoff saturation AssessmentResu… | saturation_assessment, expected_assessment_result_sha256 외 6개 |
event_audit.values.crossing_times_s[], event_audit.values.above_threshold_duration_s 외 1개 |
integration.aqueous_vant_hoff_saturation_history |
Screens only caller-selected candidate solids using the exact computed species activities at each digest-pinned van't Hoff history k… | assessment_id, equilibrium_history 외 8개 |
times_s, temperatures_K 외 1개 |
integration.co2_henry_temperature_to_fixed_fugacity_carbonate |
A completed Henry-temperature AssessmentResult is reconstructed and verified against its exact request, input digest, unit, solvent,… | henry_temperature_correction_request, henry_temperature_correction_result 외 3개 |
temperature_K, co2_fugacity_Pa 외 10개 |
integration.co2_henry_temperature_to_fixed_fugacity_carbonate_history |
Each point requires one computed and digest-verified Henry temperature-correction AssessmentResult and one aligned carbonate-equilib… | history_id, asset_id 외 8개 |
time_s[], temperature_K_history[] 외 6개 |
integration.crevice_activity_gradient_nernst_planck_flux_1d |
One-dimensional local face law with caller-resolved electroneutral states, linear concentration gradient and log-activity-coefficien… | assessment_id, asset_id 외 14개 |
dimensionless_electric_potential_gradient_per_m, species_molar_flux_mol_m2_s_by_id.* 외 2개 |
integration.crevice_activity_transport_sequential_aperture_campaign |
Each exact caller time segment is solved once on its entering uniform aperture, then explicit phase rates update inventory and the n… | assessment_id, activity_transport_request 외 24개 |
segments[].start_time_s, segments[].end_time_s 외 5개 |
integration.crevice_activity_transport_spatial_phase_aperture_handoff |
The activity-corrected reactive transport calculation is completed on a fixed, uniform initial slit geometry and exact caller clock. | assessment_id, activity_transport_request 외 23개 |
initial_aperture_m_by_cell[], cell_length_m[] 외 6개 |
integration.crevice_aperture_history_refinement |
The source geometry result is pinned by digest and input state vectors are required to be finite, positive and time ordered. | refinement_id, source_geometry_result 외 7개 |
refined_geometry_states[].elapsed_time_s, refined_geometry_states[].cell_aperture_m |
integration.crevice_aqueous_component_ledger |
Every declared mass-action constraint has exactly one explicit role; the charge-neutrality row exactly matches species charge coeffi… | assessment_id, aqueous_system 외 15개 |
duration_s, species_inventory_start[].amount_mol_by_cell[] 외 5개 |
integration.crevice_bdf_nucleation_operator_split |
Each original interval is operator split: aqueous-only fixed-volume component BDF first, cellwise seed/growth ledger second. | assessment_id, bdf_request 외 13개 |
time_s[], state_history[].aqueous_concentration_mol_m3_by_cell[][] 외 6개 |
integration.crevice_calibrated_wall_flux_callback |
A calibrated effective wall-transfer velocity and a caller-supplied equilibrium surface concentration define inward flux J=k_w(C_sur… | callback_id, species_id 외 13개 |
elapsed_time_s[], wall_transfer_velocity_m_s[] 외 2개 |
integration.crevice_calibrated_wall_sink_rate_history |
The calibration request/result pair is digest-bound and the computed fit's IDs, parameters and temperature support must match the su… | history_id, calibration_request 외 13개 |
temperature_K[], elapsed_time_s[] 외 4개 |
integration.crevice_cellwise_nucleation_kinetic_history |
Cell rows are independent closed-batch kinetic ledgers with identical ordered species/phase laws and exact common output times. | assessment_id, physical_scope_id 외 10개 |
cells[].solution_volume_m3, cells[].kinetic_history.aqueous_species[].initial_concentration_mol_m3 외 7개 |
integration.crevice_component_state_bdf |
BDF state variables are component moles, and each aqueous reaction conserves every transported component map. | assessment_id, time_s 외 67개 |
time_s[], cells[].solution_volume_L 외 85개 |
integration.crevice_component_state_faradaic_schedule_binding |
Producer and component-state time knots, species order/charge, cell order and initial conserved inventories must match. | assessment_id, component_state_request 외 8개 |
current_carrying_result.values.exact_knot_ionic_face_current_A_by_boundary[][], current_carrying_result.values.exact_knot_branch_current_density_A_m2_by_branch_and_cell.*[][] 외 2개 |
integration.crevice_component_state_segment_handoff |
The source BDF request and exact Calculation result are digest-pinned and the source is committed with closed total-component ledgers. | assessment_id, source_bdf_request 외 18개 |
target_segment_start_time_s, source_initial_component_moles_mol_by_component_cell.*[] 외 9개 |
integration.crevice_component_state_segment_transition |
Source BDF result is full-digest-bound, committed and component-ledger closed. | assessment_id, source_request 외 10개 |
boundary_time_s, next_geometry.aperture_m[] 외 6개 |
integration.crevice_composition_to_aqueous_mass_action_history |
Every composition knot binds to a caller-supplied aqueous reaction/constraint network and exact-temperature parameter set. | assessment_id, composition_result 외 10개 |
knot_results[].time_s, knot_results[].temperature_K 외 3개 |
integration.crevice_current_carrying_aperture_feedback |
Caller-specified solid molar volumes map endpoint aqueous/solid states to trial aperture histories. | assessment_id, current_carrying_request 외 26개 |
aperture_history_m_by_knot_and_cell[][], cell_cross_section_area_m2_by_knot[][] 외 3개 |
integration.crevice_current_carrying_extent_to_metal_loss |
Consumes a computed, complete, digest-pinned current-carrying Faradaic AssessmentResult and its exact request. | assessment_id, material_condition_id 외 9개 |
interval_metal_loss[].start_time_s, interval_metal_loss[].end_time_s 외 10개 |
integration.crevice_current_carrying_np_faradaic |
Cell 0 is the potential gauge at each exact knot; mouth and blind tip have zero ionic current. | assessment_id, faradaic_coupling 외 28개 |
accepted_intervals[].start_time_s, accepted_intervals[].end_time_s 외 9개 |
integration.crevice_deposition_aperture_history |
Each exact-knot solid-volume result is per the declared reference area and matches the physical scope, time and cell ordering. | assessment_id, physical_scope_id 외 13개 |
knots[].elapsed_time_s, initial_aperture_m 외 8개 |
integration.crevice_deposition_transport_geometry |
Only the upstream volume-conserving equivalent mean aperture is forwarded; it is treated as uniform within each transport cell after… | geometry_id, deposition_aperture_request 외 9개 |
transport_reference_cross_section_m2, geometry_history.geometry_states[].elapsed_time_s 외 5개 |
integration.crevice_double_layer_charge_history |
Potential, active area, reference potential and differential-capacitance curve are caller records pinned by licensed Evidence. | assessment_id, time_s 외 16개 |
stored_double_layer_charge_C_by_knot_and_cell[][], intervals[].charge_change_C_by_cell[] 외 3개 |
integration.crevice_double_layer_to_component_bdf_binding |
The double-layer history uses caller-pinned potential, reference potential, active area and differential capacitance; its stored cha… | assessment_id, component_state_request 외 11개 |
current_A_by_knot_and_cell[][], component_state_request.capacitive_current_schedule.current_A_by_knot_and_cell[][] 외 4개 |
integration.crevice_dynamic_double_layer_faradaic_history |
Caller-provided polarization and differential-capacitance curves are used only within their declared supports. | assessment_id, time_s 외 26개 |
potential_V_by_knot_and_cell[][], stored_double_layer_charge_C_by_knot_and_cell[][] 외 4개 |
integration.crevice_dynamic_double_layer_to_component_bdf_binding |
Caller maps every signed polarization branch to an evidenced aqueous reaction and electron number. | assessment_id, component_state_request 외 12개 |
derived_capacitive_schedule_sha256, derived_ionic_face_schedule_sha256 외 2개 |
integration.crevice_electrochemical_composition_history |
The digest-pinned upstream flux ledger is area-scaled and mapped directly into caller-declared aqueous species inventories using the… | assessment_id, transfer_result 외 8개 |
composition_history[].time_s, composition_history[].temperature_K 외 4개 |
integration.crevice_electrochemical_inventory_transfer |
Only a computed digest-pinned crevice mixed-potential result is accepted, and the exact upstream reference-area basis is reused. | assessment_id, mixed_potential_result 외 6개 |
reference_area_m2, interval_inventory_transfer[].start_time_s 외 12개 |
integration.crevice_external_activity_local_solid_saturation |
The computed external-activity projection result must match its typed input, transport binding, exact knot and all cell context dige… | assessment_id, projection_request 외 12개 |
time_s, elapsed_time_s 외 5개 |
integration.crevice_faradaic_spatial_chemistry_coupling |
Caller declares all branch kinetics, standard potentials, activity quotient coefficients, conductivity mappings, reaction stoichiome… | assessment_id, transport_chemistry 외 26개 |
intervals[].start_time_s, intervals[].end_time_s 외 3개 |
integration.crevice_ionic_reactive_transport_1d |
Fixed geometry dilute-ion finite-volume transport with caller-defined linearly varying axial face velocity, electroneutral states an… | assessment_id, asset_id 외 26개 |
cell_width_m, maximum_absolute_finite_volume_balance_residual_mol 외 8개 |
integration.crevice_kinetic_solid_volume_history |
Upstream solid_inventory_mol_m3_by_phase values are per solution volume and their exact species/phase order is bound to the typed ki… | assessment_id, kinetic_campaign 외 8개 |
reference_cross_section_m2, cell_volume_per_reference_area_m 외 4개 |
integration.crevice_local_external_activity_projection |
Transported cell compositions set only the explicitly selected mass-action constraint targets; each exact cell then solves an indepe… | assessment_id, transport_binding 외 14개 |
knots[].time_s, knots[].cells[].system_template.temperature_K 외 6개 |
integration.crevice_local_mass_action_projection |
For every exact transport cell knot, the caller supplies a reviewed single-liquid mass-action system whose species order matches the… | assessment_id, transport_binding 외 13개 |
knots[].time_s, knots[].cells[].system_template.temperature_K 외 6개 |
integration.crevice_local_solid_saturation |
The selected local-speciation ledger result and each exact transport cell context must match their supplied canonical digests. | assessment_id, local_speciation_ledger 외 12개 |
elapsed_time_s, temperature_K 외 4개 |
integration.crevice_local_speciation_volume_ledger |
Each local equilibrium result must be computed from the exact supplied mass-action request, and that request/result pair must be cal… | assessment_id, transport_binding 외 8개 |
knots[].time_s, knots[].cells[].cell_volume_m3 외 10개 |
integration.crevice_moving_volume_liquid_continuity |
Linear aperture change between exact knots implies constant interval-mean volume rate. | assessment_id, physical_scope_id 외 15개 |
time_s, cell_volume_m3_by_knot_and_cell[][] 외 3개 |
integration.crevice_multispecies_wall_flux_callback |
Each transported species has one digest-pinned calibrated wall-transfer history and an explicit equilibrium surface-concentration pr… | callback_id, geometry_id 외 10개 |
elapsed_time_s[], species_histories[].wall_rate_history_result.values.wall_rate_knots[].wall_transfer_velocity_m_s 외 2개 |
integration.crevice_neutral_reactive_transport_1d |
Caller-defined neutral chemical species undergo reversible local mass-action reactions while diffusing through a fixed one-dimension… | assessment_id, asset_id 외 23개 |
cell_width_m, maximum_absolute_finite_volume_balance_residual_mol 외 6개 |
integration.crevice_saturation_exposure_history |
Every upstream exact-knot saturation result is computed, digest-pinned, and belongs to the declared physical scope and exact time. | assessment_id, physical_scope_id 외 5개 |
knots[].elapsed_time_s, positive_log10_saturation_exposure_s_by_solid_and_cell.* 외 2개 |
integration.crevice_saturation_interval_average_rates |
Exact local saturation results cover every transport cell and candidate solid at each exact transport clock knot. | assessment_id, kinetic_campaign 외 7개 |
saturation_knots[].elapsed_time_s, quadrature_order_per_subinterval 외 3개 |
integration.crevice_solid_inventory_geometry_boundary_remap |
The source kinetic result is computed, digest-bound, closed within its declared tolerance, and uses the typed fixed-geometry campaign. | remap_id, source_kinetic_campaign 외 9개 |
source_elapsed_time_s, target_elapsed_time_s 외 5개 |
integration.crevice_solid_volume_hydraulic_stage |
The adapter requires a committed, digest-matched signed phase-volume result and matching assessment, scope, stage time and ordered c… | volume_rate_request, volume_rate_result 외 4개 |
time_s, hydraulic_stage_result.values.volumetric_flow_derivative_m3_s2 외 4개 |
integration.crevice_solid_volume_inventory |
Each phase inventory is nonnegative amount per caller-reviewed reference area for the same exact snapshot and spatial cell mapping. | assessment_id, physical_scope_id 외 10개 |
elapsed_time_s, cell_solid_inventory_mol_m2_by_phase.* 외 4개 |
integration.crevice_spatial_chemistry_aperture_fixed_point |
Each outer trial reruns the registered spatial chemistry-transport operator-split calculation on its exact knot history. | assessment_id, chemistry_transport_request 외 24개 |
converged_aperture_m_by_knot_and_cell[][], converged_face_velocity_m_s_by_knot_and_face[][] 외 2개 |
integration.crevice_spatial_mass_action_workflow |
A complete caller-provided aqueous mass-action system is solved independently at each exact transport knot and cell; only the existi… | assessment_id, ledger_request 외 2개 |
ledger_request.knots[].time_s, ledger_request.knots[].cells[].aqueous_mass_action_input.temperature_K 외 3개 |
integration.crevice_spatial_ohmic_mixed_potential |
One continuous metal conductor has a common potential and caller-defined reaction branches act at finite slit cells. | assessment_id, asset_id 외 31개 |
state_history[].time_s, state_history[].metal_potential_V_relative_to_cell_0_solution 외 7개 |
integration.crevice_spatial_ohmic_partial_current_metal_loss |
A computed spatial ohmic mixed-potential history is the sole current source and is pinned by its complete AssessmentResult digest. | assessment_id, upstream_result 외 4개 |
state_history[].time_s, state_history[].branches[].signed_current_density_A_m2_by_cell[] 외 4개 |
integration.crevice_transport_to_local_mass_action |
Caller-reviewed one-to-one mappings set one existing aqueous mass-action linear constraint from a transported concentration per exac… | assessment_id, solution_id_prefix 외 14개 |
knots[].time_s, cell_volume_m3_by_cell[] 외 3개 |
integration.crevice_transport_volume_weighted_composition |
Only a computed transport result whose digest is bound to the exact campaign request and geometry history is accepted. | assessment_id, campaign 외 5개 |
knot_summaries[].time_s, knot_summaries[].cell_volume_m3 외 5개 |
integration.crevice_wall_flux_inventory_history |
The callback rate, wall surface concentration, bulk concentration, wall-area density and slit cross section are reconstructed linear… | assessment_id, wall_flux_callback 외 7개 |
elapsed_time_s[], bulk_concentration_mol_m3_by_knot_species_cell 외 2개 |
integration.cycle_block_feature_handoff |
Extract exact finite-plane scalar stress/strain features from each caller representative closed tensor cycle and map selected values… | assessment_id, physical_scope_id 외 25개 |
block_feature_ledger[].stress_closure_error_Pa, block_feature_ledger[].strain_closure_error 외 9개 |
integration.elastic_joint_load_ordered_history |
Each ordered snapshot is evaluated independently with the declared elastic two-spring closed-contact model. | history_id, asset_id 외 8개 |
minimum_clamp_force_N, joint_load_history[].time_s 외 6개 |
integration.elastic_joint_to_flange_contact_history |
At each exact caller load snapshot, apply only the supplied linear nodal closure-per-clamp-force mapping around its declared referen… | assessment_id, joint_id 외 8개 |
joint_load_history.knots[].time_s, joint_load_history_result.values.joint_load_history[].clamp_force_N 외 5개 |
integration.electrochemical_chemistry_boundary_audit |
Digest-pinned computed chemistry/speciation/transport stages must align on asset, location, clock, exact times, temperatures, materi… | assessment_id, stages 외 5개 |
stages[].elapsed_time_s, stages[].temperature_K |
integration.electrochemical_metal_loss_to_crevice_geometry |
Only a computed digest-pinned electrochemical metal-loss result with every selected reaction explicitly allocated is accepted. | assessment_id, metal_loss_result 외 21개 |
geometry_states[].elapsed_time_s, source_time_origin_s 외 6개 |
integration.electrochemical_metal_loss_wall_thickness_history |
Requires a computed digest-pinned electrochemical metal-loss result and an Evidence-linked measured wall-thickness baseline at the f… | assessment_id, metal_loss_result 외 15개 |
assessed_wall_area_m2, effective_density_kg_m3 외 12개 |
integration.electrochemical_partial_current_metal_loss |
A digest-pinned computed mixed-potential history is required; branch electron number and exposed area are read from that exact upstr… | assessment_id, material_condition_id 외 8개 |
reference_area_m2, interval_metal_loss[].start_time_s 외 12개 |
integration.electrochemical_wall_flux_schedule |
The upstream metal-loss ledger is digest-pinned and only anodic metal removal is mapped. | metal_loss_result, metal_loss_result_sha256 외 7개 |
interval_support_s, wall_flux |
integration.electrochemical_wall_thickness_scenario_envelope |
Consumes only complete digest-pinned computed wall-thickness history AssessmentResults on one common physical/material scope and mea… | assessment_id, asset_id 외 18개 |
knotwise_extrema[].time_s, knotwise_extrema[].minimum_remaining_thickness_m 외 3개 |
integration.external_crevice_solver_receipt |
An external solver receipt must match the pinned aperture history, cell mesh, face ordering, SI units, axial sign and exact time knots. | assessment_id, provider_id 외 29개 |
elapsed_time_s, face_positions_m 외 4개 |
integration.external_flange_compliance_history |
Every caller-declared knot is paired with a digest-verified external FE stiffness receipt using a stable provider revision, asset sc… | history_id, times_s 외 5개 |
times_s, operator_history[].values.flange_relative_compliance_matrix_m_N |
integration.external_flange_compliance_receipt |
A digest-pinned finite-element receipt must identify the selected load case, mesh, coordinate frame, stiffness result field, explici… | binding_id, provider_receipt 외 27개 |
flange_relative_compliance_matrix_m_N, minimum_free_stiffness_eigenvalue_N_m 외 1개 |
integration.external_flange_diagnostic_screen |
Criteria and uncertainty comparisons are caller-owned and evidence-backed. | receipt, criteria 외 2개 |
criteria[].maximum_absolute_value_plus_uncertainty |
integration.external_gasket_fe_field_import |
The adapter validates caller-supplied field metadata, array digests, direct location mapping, support data and exact solver-step tim… | assessment_id, joint_id 외 21개 |
history[].time_s, history[].response_field[].contact_force_N 외 5개 |
integration.findley_miner_ordered_block_history |
Every block carries a computed, digest-consistent calibrated Findley life result for one shared asset, location and material condition. | blocks, damage_threshold 외 4개 |
total_supplied_cycles, cumulative_damage 외 5개 |
integration.fixed_fugacity_carbonate_to_scale_kinetics |
Use the exact computed fixed-fugacity carbonate history CO3 concentration, multiply by a caller-provided activity coefficient under … | assessment_id, fixed_fugacity_carbonate_history 외 13개 |
knots[].time_s, knots[].temperature_K 외 7개 |
integration.gasket_fe_von_mises_caller_limit_screen |
Six imported symmetric Cauchy stress components in one caller-mapped Cartesian frame are reduced by the J2/von Mises invariant. | assessment_id, imported_fe_result 외 24개 |
temperature_K, maximum_caller_von_mises_stress_Pa 외 5개 |
integration.gasket_joint_equilibrium_local_covariance |
Caller-supplied covariance is propagated as J Sigma J^T using central finite differences of the existing multi-bolt sector equilibri… | assessment_id, joint_request 외 13개 |
nominal_output_vector[].opening_m, nominal_output_vector[].tensile_force_N 외 3개 |
integration.gasket_joint_spatial_resultant_balance |
Only exact-knot per-bolt forces from one computed multi-bolt joint result are reconciled with one computed static unilateral contact… | assessment_id, bolt_load_result 외 33개 |
selected_time_s, bolt_closing_force_sum_N 외 13개 |
integration.gasket_leakage_pressure_inventory_decay |
Gas inventory follows a fixed-volume isothermal ideal-gas equation of state. | assessment_id, leakage_history 외 14개 |
initial_gas_inventory_mol, final_gas_inventory_mol 외 7개 |
integration.gasket_leakage_rate_threshold_events |
The source must be a digest-pinned computed gasket leakage history with explicit mol/s and s units. | assessment_id, physical_scope_id 외 18개 |
minimum_rate_mol_s, maximum_rate_mol_s 외 8개 |
integration.gasket_leakage_scenario_exposure |
Only a digest-pinned computed finite correlated leakage scenario snapshot is accepted. | assessment_id, source_leakage_result 외 6개 |
exposure_start_time_s, exposure_end_time_s 외 5개 |
integration.gasket_leakage_scenario_rate_interval |
Only two digest-pinned computed envelopes with identical joint/scenario/calibration identity and node order are accepted. | assessment_id, start_result 외 10개 |
interval_start_time_s, interval_end_time_s 외 8개 |
integration.gasket_temperature_compression_joint_history |
Every load step uses the same caller bolt preloads/stiffnesses and sector data with its exact temperature-specific interpolated gask… | assessment_id, asset_id 외 28개 |
history[].time_s, history[].temperature_K 외 14개 |
integration.gasket_thermoelastic_expansion_joint_history |
Each component's free thermal change is its reference dimension times expm1 of the exact piecewise-linear integral of instantaneous … | assessment_id, joint_history 외 5개 |
thermal_expansion_history[].time_s, thermal_expansion_history[].temperature_K 외 10개 |
integration.lh2dt_dynamic_network_node_state_history |
The upstream result revision, run result, and configuration digests are caller-pinned. | model_id, upstream_repository 외 15개 |
point_count, pressure_Pa 외 1개 |
integration.multi_bolt_joint_to_flange_contact_request |
Bolt force comes from a digest-pinned computed multi-bolt equilibrium AssessmentResult at one exact named knot. | assessment_id, bolt_load_result 외 16개 |
selected_time_s, bolt_force_by_id_N 외 4개 |
integration.multiaxial_cycle_block_result_summary |
The stateful damage result, bound request and exchange receipt must have exact matching digests and ordered block lineage. | receipt, bound_request 외 2개 |
computed_cycle_count, receipt_cycle_count 외 1개 |
integration.spatial_piecewise_mass_action |
Rates, reaction directions, concentration/activity approximation and local-use rights are caller-supplied. | provider_id, provider_revision 외 14개 |
interval_support_s, reaction_source |
integration.tube_bundle_lame_stress_history |
Each tube is modeled as a homogeneous isotropic linear-elastic annular cylinder using the caller's current inner diameter and minimu… | assessment_id, asset_id 외 16개 |
histories[].inner_radius_m, histories[].outer_radius_m 외 8개 |
integration.wco2_species_transfer_audit |
Species formulas, formal charges, transfer coefficients and Evidence are caller supplied. | upstream_species, downstream_species 외 2개 |
upstream_species_count, downstream_species_count |
integration.wet_co2_carbonate_alkalinity_speciation |
Only CO2star, bicarbonate, carbonate, hydrogen and hydroxide contribute to the alkalinity balance. | assessment_id, asset_id 외 21개 |
co2star_concentration_mol_m3, total_alkalinity_mol_m3 외 2개 |
integration.wet_co2_carbonate_transport_boundary_history |
The input must be a complete computed fixed-fugacity carbonate history or digest-bound Henry-carbonate adapter history. | source_history_result, source_history_result_sha256 외 3개 |
time_s, temperature_K_history 외 2개 |
integration.wet_co2_condensate_film_history |
The caller flux is the net retained water source per actual fixed wall-patch area, including condensation, evaporation, drainage and… | assessment_id, asset_id 외 11개 |
initial_water_areal_inventory_kg_m2, inventory_history[].time_s 외 4개 |
integration.wet_co2_condensate_state |
Water fugacity and wall equilibrium fugacity are provider-supplied on one compatible fugacity/standard-state basis. | assessment_id, asset_id 외 31개 |
time_s, bulk_gas_temperature_K 외 5개 |
integration.wet_co2_cylindrical_aqueous_scale_sink_feedback |
Caller owns phase identity, stoichiometry, intrinsic phase flux law, and geometry inputs. | assessment_id, spatial_request 외 14개 |
time_s[], history[].concentration_mol_m3[] 외 2개 |
integration.wet_co2_cylindrical_bv_wall_recession |
Integrated reaction extents and explicit aqueous elemental stoichiometry determine the alloy-element release per unit axial length. | assessment_id, spatial_mixed_potential_request 외 7개 |
history[].time_s, history[].bore_radius_m 외 5개 |
integration.wet_co2_cylindrical_coupled_scale_geometry_replay |
The caller supplies all state, thermodynamic, kinetics, stoichiometry, transport and diffusivity records. | assessment_id, geometry_seed 외 10개 |
inventory_absolute_tolerance_mol_m, iteration_summaries[].maximum_inventory_residual_mol_m |
integration.wet_co2_cylindrical_diffusion_limited_scale_growth |
The precipitation rate is limited by the least available reactant flux among caller-declared solid reactants. | assessment_id, solid_id 외 10개 |
history[].kinetic_precipitation_flux_mol_m2_s, history[].diffusion_limited_precipitation_flux_mol_m2_s 외 5개 |
integration.wet_co2_cylindrical_finite_gas_stage_geometry_feedback |
Caller transfer, mass-action, BV and scale laws remain fixed/evidence-bound. | assessment_id, finite_gas_stage_request 외 4개 |
geometry_history[].bore_radius_m, geometry_history[].steel_inner_radius_m 외 10개 |
integration.wet_co2_cylindrical_finite_gas_stage_speciation_scale_feedback |
Caller supplies a complete finite aqueous mass-action network, activity and equilibrium provider lineage, reaction formulae, natural… | assessment_id, spatial_request 외 29개 |
time_s[], geometry_history[].bore_radius_m 외 7개 |
integration.wet_co2_cylindrical_finite_liquid_transfer_inventory |
The transfer exposure result supplies a whole-segment conductance on the cylindrical wetted-area basis. | assessment_id, species_id 외 7개 |
history[].bulk_concentration_mol_m3, history[].wall_concentration_mol_m3 외 6개 |
integration.wet_co2_cylindrical_geometry_coupled_history |
Each outer iteration reruns the transient cylindrical finite-volume species balance and common BV mixed potential on a candidate exa… | assessment_id, spatial_request 외 14개 |
time_s[], final_geometry_history[].bore_radius_m 외 5개 |
integration.wet_co2_cylindrical_geometry_fixed_point_controller |
A caller-owned runtime solver or bundled spatial-BV adapter must recompute declared physics for each supplied exact-knot radius path. | assessment_id, asset_id 외 19개 |
time_s[], converged_bore_radius_m_by_knot[] 외 2개 |
integration.wet_co2_cylindrical_hydraulics_to_scale_removal |
The hydraulic and shear-removal contracts share exact scope, geometry result digest and time knots. | assessment_id, hydraulics_result 외 3개 |
hydraulic_shear_mapping[].time_s, hydraulic_shear_mapping[].signed_wall_shear_stress_Pa 외 2개 |
integration.wet_co2_cylindrical_liquid_transfer_capacity_history |
The existing pointwise liquid-side mass-transfer correlation is evaluated at each exact cylindrical hydraulics knot. | assessment_id, physical_scope_id 외 15개 |
history[].segment_wall_area_m2, history[].liquid_side_mass_transfer_coefficient_m_s 외 3개 |
integration.wet_co2_cylindrical_multilayer_transport_resistance |
Piecewise constant caller diffusivities are combined as exact logarithmic cylindrical resistances in series. | assessment_id, geometry 외 6개 |
history[].species_transport.*.inner_area_resistance_s_m, history[].species_transport.*.log_diffusivity_integral_s_m2 외 3개 |
integration.wet_co2_cylindrical_scale_kinetics_to_geometry |
Caller phase thickness histories and wall recession are exact-knot aligned and independently reviewed. | assessment_id, geometry 외 4개 |
history[].time_s, history[].phase_inventory_mol_m_by_phase.* 외 3개 |
integration.wet_co2_cylindrical_scale_recession_feedback |
Every outer iteration recalculates spatial BV transport, phase saturation and wall kinetics, multilayer cylindrical diffusion supply… | assessment_id, spatial_request 외 20개 |
time_s[], final_geometry_history[].bore_radius_m 외 4개 |
integration.wet_co2_cylindrical_shear_limited_scale_removal |
Scale removal begins above a caller-declared critical wall shear stress and follows a caller-calibrated power law. | assessment_id, solid_id 외 10개 |
history[].wall_shear_stress_Pa, history[].detachment_velocity_m_s 외 3개 |
integration.wet_co2_cylindrical_spatial_mixed_potential |
Exact geometry knots with left-held interval inputs. | assessment_id, geometry 외 24개 |
time, concentration 외 3개 |
integration.wet_co2_cylindrical_stage_kinetic_scale_feedback |
Caller supplies activity coefficients, dimensionless activity reference concentrations, natural-log solubility products, reaction fo… | assessment_id, spatial_request 외 14개 |
time_s[], geometry_history[].bore_radius_m 외 4개 |
integration.wet_co2_cylindrical_stage_speciation_scale_feedback |
Caller supplies a complete finite aqueous mass-action network, activity and equilibrium provider lineage, reaction formulae, natural… | assessment_id, spatial_request 외 19개 |
time_s[], geometry_history[].bore_radius_m 외 18개 |
integration.wet_co2_cylindrical_steady_hydraulics |
The circular bore is represented by the exact area and wetted perimeter of the supplied geometry history. | assessment_id, geometry 외 6개 |
history[].signed_flow_rate_m3_s, history[].signed_mean_velocity_m_s 외 4개 |
integration.wet_co2_cylindrical_transient_transport |
Each time interval uses its left-knot boundary, transport and reaction records; geometric remapping uses annular overlap and explici… | assessment_id, geometry 외 20개 |
history[].time_s, history[].radial_edges_m[] 외 5개 |
integration.wet_co2_cylindrical_transport_mixed_potential |
Geometry and electrochemical boundary are paired at exactly equal caller time knots; no interpolation is performed. | assessment_id, geometry 외 7개 |
history[].time_s, history[].bore_radius_m 외 9개 |
integration.wet_co2_cylindrical_wall_saturation_scale_kinetics |
Exact wall-adjacent cylindrical transport concentrations are paired with caller activity coefficients and a caller-supplied log10 Ks… | assessment_id, physical_scope_id 외 19개 |
saturation_history[].time_s, saturation_history[].temperature_K 외 3개 |
integration.wet_co2_elemental_phase_handoff |
Only an already-computed source result payload with matching digest and exact species/phase formula mappings is consumed. | campaign_id, source_provider_id 외 13개 |
elapsed_time_s[], element_inventory[].aqueous_inventory_mol[] 외 2개 |
integration.wet_co2_film_transport_limited_mixed_potential |
A digest-pinned caller carbonate boundary and caller-reviewed reactant film records define the finite dissolved-species support. | boundary, boundary_sha256 외 8개 |
mixed_potential_V, net_current_residual_A_m2 외 2개 |
integration.wet_co2_finite_gas_liquid_exchange_history |
Each interval has fixed area, liquid volume, Henry coefficient, gas inventory capacity and two-film transfer coefficients. | assessment_id, asset_id 외 14개 |
interfacial_area_m2, fixed_liquid_volume_m3 외 6개 |
integration.wet_co2_finite_gas_multispecies_wall_flux_history |
The interval species-flux schedule, transfer coefficient, Henry coefficient, inflow, area and initial inventories are caller owned. | species_ids, co2star_species_id 외 19개 |
time_s, gas_fugacity_Pa 외 4개 |
integration.wet_co2_finite_gas_variable_liquid_history |
Per-area gas inventory capacity, patch area, volume flux, Henry coefficient and film coefficients are caller-reviewed. | assessment_id, asset_id 외 27개 |
initial_liquid_volume_per_area_m, initial_liquid_co2star_mol_m3 외 6개 |
integration.wet_co2_finite_gas_wall_reaction_inventory_history |
Finite gas inventory, Henry coefficient, film coefficients, volume flux, incoming dissolved CO2*, initial state and solver tolerance… | assessment_id, asset_id 외 35개 |
state_history[].time_s, state_history[].liquid_co2star_mol_m3 외 7개 |
integration.wet_co2_finite_gas_water_condensation_history |
Water vapor component pressure follows the ideal-gas relation from finite vapor moles at the supplied interval temperature and gas v… | assessment_id, asset_id 외 13개 |
final_gas_water_vapor_moles, final_wall_water_areal_inventory_kg_m2 외 5개 |
integration.wet_co2_finite_inventory_electrode_mixed_potential |
The caller defines a common calibrated electrode potential interval at every exact geometry interval. | assessment_id, geometry_result 외 14개 |
history[].metal_minus_solution_mixed_potential_V, history[].net_current_density_A_m2 외 4개 |
integration.wet_co2_finite_inventory_saturation_scale_geometry |
Wall activities use molarity standard state, caller activity coefficients and a caller log10 Ksp at each exact time knot. | assessment_id, solid_id 외 18개 |
saturation_history[].wall_concentration_mol_m3_by_species.*, saturation_history[].saturation_ratio 외 4개 |
integration.wet_co2_finite_liquid_transfer_history |
Gas fugacity, Henry convention, interface area, liquid volume and two-film coefficients are constant within each exact interval and … | assessment_id, asset_id 외 13개 |
interfacial_area_m2, fixed_liquid_volume_m3 외 7개 |
integration.wet_co2_gas_film_condensation_transfer_history |
Gas-film molar flux follows a caller-supplied linear fugacity driving-force law on each interval. | assessment_id, asset_id 외 11개 |
final_water_areal_inventory_kg_m2, final_uniform_equivalent_film_thickness_m 외 6개 |
integration.wet_co2_lumped_wall_thermal_condensation_history |
A single wall temperature is governed by a lumped areal heat capacity and caller heat boundary terms. | assessment_id, asset_id 외 26개 |
final_wall_temperature_K, final_gas_water_vapor_moles 외 5개 |
integration.wet_co2_parallel_zone_transfer |
Each caller-declared interface zone has one representative gas and liquid state and local two-film coefficients. | assessment_id, asset_id 외 9개 |
total_interfacial_area_m2, signed_total_gas_to_liquid_transfer_rate_mol_s 외 3개 |
integration.wet_co2_reactive_film_transfer |
One-dimensional steady stagnant liquid-film diffusion with constant diffusivity and a caller-supplied irreversible first-order sink … | assessment_id, asset_id 외 27개 |
time_s, temperature_K 외 5개 |
integration.wet_co2_scale_corrosion_moving_geometry_history |
Scale molar volume, metal conversion, product yield and external scale formation/dissolution schedules are caller provided and evide… | initial_wall_thickness_m, initial_scale_thickness_m 외 11개 |
time_s, wall_thickness_m 외 4개 |
integration.wet_co2_scale_corrosion_simultaneous_history |
Scale thickness is a continuous ODE state and updates the nested film-transport cap at each electrochemical solver call. | assessment_id, asset_id 외 23개 |
final_scale_thickness_m, final_scale_inventory_mol_m2 외 8개 |
integration.wet_co2_scale_diffusion_electrode_mixed_potential |
At each caller time knot, a one-dimensional steady finite-volume reactant balance inside a fixed scale is solved simultaneously with… | assessment_id, asset_id 외 9개 |
history[].time_s, history[].temperature_K 외 12개 |
integration.wet_co2_simulation_wall_loss_envelope |
Each provider simulation scenario is bound to exactly one CC BY source row, row digest and archive evidence digest. | scenarios, rows 외 9개 |
provider_row_count, exposure_duration_s 외 10개 |
integration.wet_co2_transient_gas_carbonate_alkalinity_equilibrium |
Only the ideal carbonate-only system is equilibrated using caller conditional K1, K2 and Kw values with explicit pH support. | initial_liquid_volume_m3, initial_gas_fugacity_Pa 외 18개 |
time_s, temperature_K 외 7개 |
integration.wet_co2_variable_condensate_transfer_history |
Liquid volume per area changes linearly at caller-provided constant interval flux; volume flux cannot drive negative inventory. | assessment_id, asset_id 외 13개 |
initial_liquid_volume_per_area_m, initial_co2star_concentration_mol_m3 외 5개 |
kinetics · 반응속도·온도 이동 (1개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
kinetics.arrhenius |
Single thermally activated mechanism; parameters and applicable temperature range are user supplied. | reference_rate, reference_temperature_K 외 2개 |
temperature_factor, rate |
maintenance · 유지관리·이력·사용자 지표 (2개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
maintenance.declared_equipment_effectiveness |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, asset_id 외 9개 |
availability_fraction, performance_ratio 외 2개 |
maintenance.declared_pareto_summary |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, observation_window_id 외 4개 |
total_measure, ranked_categories[].fraction_of_total |
materials · 재료 구성식·조성·시험 해석 (35개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
materials.allowable_property_provider |
Property identity, edition, applicability and provider lineage are exact caller declarations. | audit_id, provider_set_id 외 8개 |
audit_id, provider_set_id 외 12개 |
materials.bonded_layer_integrity |
Substrate, layer, lots, interface, geometry, process history, samples and observations remain caller evidence. | assessment_id, asset_id 외 16개 |
report_schema_version, assessment_id 외 12개 |
materials.bonded_layer_integrity_assessment |
Substrate, layer, interface, lot and process identities are caller-reviewed and preserved. | assessment_id, asset_id 외 20개 |
assessment_id, asset_id 외 12개 |
materials.brittle_applicability_evidence |
Material, product form, condition, thickness, orientation and service descriptors are reviewed caller identities. | assessment_id, asset_id 외 22개 |
assessment_id, selected_envelope_id 외 5개 |
materials.casting_forging_quality |
Product, heat, route, process, heat treatment, sampling and observation evidence remains caller supplied. | assessment_id, asset_id 외 16개 |
report_schema_version, assessment_id 외 12개 |
materials.casting_forging_quality_record |
Component, heat, manufacturing route, heat treatment, inspection coverage, observations and caller limits retain separate identities… | record_id, asset_id 외 18개 |
heat_treatment_record_count, inspection_region_count 외 1개 |
materials.certificate_reconciliation |
Certificate campaign coverage composed over lower-level reconciliation with exact reviewed target product and traceability binding. | assessment_id, asset_id 외 10개 |
disposition, category_findings 외 4개 |
materials.chemistry_reconciliation |
Exact supplied identity and interval-valued certificate/verification chemistry with an explicit comparison policy. | certificate, verification 외 4개 |
elements[].limits.lower, elements[].limits.upper |
materials.component_material_class_assessment |
Caller profile authority, physical scope, service and component role mapping are explicit; exact labels only. | basis, class_id 외 10개 |
component_findings, role_counts[].observed_count |
materials.composite_compatibility_assessment |
Laminate, resin, fiber, manufacturing, layup and environment identities must match exactly. | assessment_id, asset_id 외 17개 |
assessment_id, exposure_comparisons 외 6개 |
materials.composition_index_recipe |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, index_id 외 6개 |
index_value, output_unit 외 5개 |
materials.composition_temperature_correlation |
Caller composition support, coefficients, temperature units, material condition and calibration population are explicit. | basis, index_id 외 12개 |
predicted_temperature_K, recipe_temperature_value |
materials.cyclic_ramberg_osgood_fit |
Weighted log-space fit of stabilized cyclic stress amplitude against positive plastic strain amplitude. | fit_id, asset_id 외 14개 |
fit_id, cyclic_strength_coefficient 외 8개 |
materials.declared_analysis_tolerance_recipe |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, element_id 외 6개 |
permitted_variation_mass_fraction |
materials.declared_chemical_analysis_comparison |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, physical_product_id 외 10개 |
comparisons[].effective_minimum_mass_fraction, comparisons[].effective_maximum_mass_fraction 외 4개 |
materials.declared_classification_assignment |
Caller classification records bind material designation, edition, product, condition, process, subject and qualification purpose. | basis, lookup_id 외 4개 |
assignment_findings |
materials.ductility_retention |
Matched test conditions and declared reference specimen; not a structural failure probability. | baseline_elongation_fraction, exposed_elongation_fraction |
ductility_retention_ratio, relative_ductility_loss |
materials.floored_composition_index_recipe |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, index_id 외 7개 |
index_value, output_unit 외 8개 |
materials.impact_transition |
One declared impact-test series with bounded logistic shelves, explicit robust-loss choice and observed-domain crossing. | series_id, specimen_geometry_id 외 10개 |
lower_shelf_energy_J, upper_shelf_energy_J 외 7개 |
materials.monotonic_hollomon_calibration |
Weighted log-space Hollomon fit to caller-reviewed monotonic pre-necking stress and elastic-subtracted plastic strain. | calibration_id, asset_id 외 15개 |
calibration_id, strength_coefficient 외 9개 |
materials.multi_record_certificate_reconciliation |
One exact heat, lot and reviewed material-condition identity applies to every record. | reconciliation_id, asset_id 외 19개 |
reconciliation_id, physical_scope_id 외 11개 |
materials.offset_yield |
Caller supplies extensometer strain, corrected monotonic stress data, elastic modulus and offset. | engineering_strain, engineering_stress_Pa 외 2개 |
offset_yield_stress_Pa, intersection_strain 외 1개 |
materials.phase_fraction_linear_contrast |
One sample, region and measurement method are assessed at a time. | assessment_id, asset_id 외 12개 |
contrast_rows, missing_reviews 외 1개 |
materials.phase_microstructure_assessment |
Every phase fraction and expanded uncertainty is a reviewed measurement on an explicit sample and region. | assessment_id, asset_id 외 11개 |
assessment_id, comparison_rows 외 5개 |
materials.pitting_composition_index |
User-declared composition coefficients; index is not a corrosion rate or material acceptance rule. | chromium_mass_percent, molybdenum_mass_percent 외 3개 |
composition_index |
materials.polymer_arrhenius_shift_calibration |
Weighted calibration is restricted to one polymer formulation, physical state and endpoint definition. | calibration_id, asset_id 외 17개 |
calibration_id, reference_temperature_K 외 9개 |
materials.polymer_compatibility_envelope_match |
Material, media, unit and loading identifiers are compared exactly without aliases or hidden conversions. | assessment_id, asset_id 외 20개 |
assessment_id, asset_id 외 10개 |
materials.ramberg_osgood |
Stabilized uniaxial cyclic amplitude relation with caller-calibrated K-prime and n-prime. | stress_amplitude_Pa, elastic_modulus_Pa 외 2개 |
elastic_strain_amplitude, plastic_strain_amplitude 외 1개 |
materials.resin_hdt_headroom |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, material_condition_id 외 6개 |
test_flexural_stress_Pa, hdt_headroom_K 외 2개 |
materials.scaled_strength_minimum |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, material_condition_id 외 2개 |
material_condition_id, temperature_K 외 4개 |
materials.specification_aliases |
The existing exact resolver compares namespace, designation, edition, form and condition without normalization. | audit_id, profile_set_id 외 9개 |
audit_id, profile_set_id 외 13개 |
materials.steel_composition_index |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, method 외 7개 |
method, index_value 외 3개 |
materials.strain_life_coefficient_calibration |
Two-stage weighted log-linear CMB calibration requires separated elastic and plastic strain amplitudes. | calibration_id, asset_id 외 17개 |
calibration_id, fatigue_strength_coefficient 외 12개 |
materials.temperature_trend_strength_scaling |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, material_condition_id 외 7개 |
reference_temperature_K, evaluation_temperature_K 외 3개 |
materials.tensile_point |
Gauge extension and original section are supplied; uniform-volume conversion excludes necking. | force_N, initial_area_m2 외 3개 |
engineering_stress_Pa, engineering_strain 외 2개 |
mechanics · 압력응력·열응력·접촉·탄성 (6개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
mechanics.gasket_nominal_contact_pressure |
The compressive force and effective contact area refer to the same reviewed physical load state and scope. | assessment_id, compressive_gasket_force_N 외 7개 |
compressive_gasket_force_N, effective_contact_area_m2 외 1개 |
mechanics.lame_cylinder |
Long homogeneous isotropic linear-elastic cylinder; end effects and instability excluded. | inner_radius_m, outer_radius_m 외 4개 |
hoop_stress_Pa, radial_stress_Pa 외 2개 |
mechanics.plane_stress |
Two-dimensional Cauchy stress with zero out-of-plane normal/shear components. | stress_x_Pa, stress_y_Pa 외 1개 |
principal_max_Pa, principal_min_Pa 외 1개 |
mechanics.thermal_restraint |
Uniform temperature change, uniaxial linear elasticity and constant properties. | young_modulus_Pa, expansion_coefficient_per_K 외 2개 |
free_thermal_strain, restrained_uniaxial_stress_Pa |
mechanics.thin_cylinder |
Closed-end membrane approximation, t/r <= 0.1; user allowable is not an inferred code value. | pressure_difference_Pa, mean_radius_m 외 2개 |
hoop_stress_Pa, axial_stress_Pa 외 2개 |
mechanics.through_wall_thermal_stress |
Linear-elastic plane-section thermal stress under explicit resultants or explicit membrane strain and curvature. | profile_id, material_condition_id 외 27개 |
section_midpoint_m, free_thermal_strain 외 12개 |
piping · 배관 조건·사용자 기준 (1개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
piping.displacement_stress_allowance |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, variant 외 6개 |
allowable_displacement_stress_range_Pa |
protection · 사용자 계약·계산 기능 (2개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
protection.cathodic_budget |
Declared piecewise-linear coating/current histories, charge capacity and an independent current-output bound. | time_s, protected_area_m2 외 8개 |
required_charge_C, mean_current_A 외 5개 |
protection.coating_coverage |
Uniform deposited film; solids fraction and transfer losses are declared. | area_m2, dry_thickness_m 외 2개 |
dry_volume_m3, wet_thickness_m 외 1개 |
reliability · 신뢰도·위험도 계산 (16개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
reliability.bayesian_linear_thickness_update |
Caller-reviewed Gaussian prior and thickness measurement-error model for one physical location under a constant linear thickness-los… | update_id, asset_id 외 29개 |
update_observation_ids, holdout_observation_ids 외 20개 |
reliability.binary_event_pair_calibration |
Calibration and holdout physical sequences, source groups and independence groups are disjoint. | calibration_id, asset_id 외 25개 |
calibration_id, asset_id 외 25개 |
reliability.continuous_time_markov_chain |
Caller-reviewed finite-state time-homogeneous continuous-time Markov generator over one physical scope and interval. | chain_id, asset_id 외 23개 |
probability_given_survival, state_probabilities_at_horizon 외 7개 |
reliability.ctmc_generator_calibration |
State/transition definitions and exposure units are exact caller-reviewed identities. | calibration_id, asset_id 외 25개 |
calibration_id, asset_id 외 22개 |
reliability.exclusive_paths |
Mutually exclusive and complete conditional paths allocate initiation exactly once. | initiating_frequency_per_s, conditional_probabilities |
path_frequencies_per_s |
reliability.fault_tree_minimal_cut_sets |
Caller-declared minimal cut sets; AND within each cut, OR across cuts; exact inclusion-exclusion under reviewed independent basic ev… | top_event_id, basic_events 외 5개 |
top_event_probability, minimal_cut_set_probabilities |
reliability.gamma_poisson |
Stationary Poisson event counts with Gamma(shape, exposure) prior and complete ascertainment. | prior_shape, prior_exposure_s 외 3개 |
posterior_shape, posterior_exposure_s 외 2개 |
reliability.gaussian_mean_shift_importance_sampling |
Caller-reviewed samples are drawn from an independent unit-normal mean-shift proposal in a named latent space and evaluated by one d… | estimate_id, asset_id 외 32개 |
probability_given_survival, raw_importance_estimate 외 19개 |
reliability.gaussian_thickness_posterior_sample_design |
Caller-reviewed two-dimensional Gaussian posterior for reference-time thickness and signed constant loss rate at one physical location. | sample_design_id, asset_id 외 21개 |
assessment_time_s, required_thickness_m 외 8개 |
reliability.independent_gate |
Input events share a horizon and conditioning; statistical independence must be explicitly declared. | probabilities, gate 외 1개 |
probability |
reliability.joint_event_probability |
Caller-reviewed exhaustive joint distribution over binary events sharing one physical scope, horizon and conditioning basis. | distribution_id, asset_id 외 19개 |
probability_given_survival, state_probability_sum 외 7개 |
reliability.linear_thickness_state_space_update |
Caller-reviewed two-state linear thickness/loss-rate transition with additive covariance rate and independent sequential thickness-m… | update_id, asset_id 외 30개 |
observation_diagnostics, state_time_s 외 15개 |
reliability.piecewise_continuous_time_markov_chain |
Caller-reviewed finite-state piecewise-constant continuous-time Markov generators over contiguous chronological segments. | chain_id, asset_id 외 23개 |
segment_ids, boundary_times_s 외 14개 |
reliability.sampled_linear_thickness_first_passage |
Caller-reviewed joint weighted samples describe remaining thickness and a nonnegative constant loss rate at one physical location, c… | forecast_id, asset_id 외 22개 |
assessment_time_s, required_thickness_m 외 8개 |
reliability.sobol_replicate_stability |
All replicates share exact output, parameter, distribution, dependence, design and evaluator identities. | assessment_id, asset_id 외 27개 |
assessment_id, asset_id 외 13개 |
reliability.weibull_interval |
Conditional on survival to current age and a fixed Weibull lifetime model; repair/replacement excluded. | shape, scale_s 외 2개 |
probability_given_survival, integrated_hazard 외 1개 |
structural · 두께·압력 용량·FAD·구조 평가 (24개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
structural.burst_pressure_comparison |
Partition-aware descriptive comparison of caller-supplied pressure predictions with qualified burst tests; no pressure equation, acc… | comparison_id, prediction_provider_id 외 6개 |
partition_summaries.calibration.arithmetic_mean_predicted_to_observed_ratio, partition_summaries.holdout.arithmetic_mean_predicted_to_observed_ratio 외 7개 |
structural.caller_fad_envelope |
Compare identified provider FAD coordinates only against a reviewed caller curve with matching material/geometry/load basis. | point, envelope |
kr_limit, kr_margin 외 1개 |
structural.component_pressure_reference |
Static connected fluid, uniform caller density and gravity; upward-positive elevations in a reviewed common frame. | asset_id, location_id 외 13개 |
hydrostatic_reference_offsets_Pa, reference_pressure_limits_Pa 외 1개 |
structural.creep_fatigue_campaign |
Compose same-history creep rupture-time fractions, fatigue cycle fractions and a caller-owned interaction envelope without substitut… | campaign_id, creep_history 외 7개 |
— |
structural.creep_fatigue_interaction_provider_evidence |
Material, interaction basis and separate creep/fatigue quantity definitions match exactly. | assessment_id, asset_id 외 22개 |
assessment_id, asset_id 외 17개 |
structural.declared_pressure_thickness_relation |
Caller supplies reviewed dimension conventions, signed thickness coefficient, numerator factor, allowable stress, joint efficiency a… | basis, asset_id 외 22개 |
effective_thickness_m, pressure_difference_Pa 외 1개 |
structural.declared_shell_characteristic_lengths |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, physical_scope_id 외 4개 |
sqrt_radius_thickness_m, declared_lengths_m.* |
structural.external_pressure |
Existing provider assessments retain exact geometry, material, imperfection, boundary, load, mesh, model, pressure and digest identi… | assessment_id, asset_id 외 15개 |
report_schema_version, assessment_id 외 13개 |
structural.external_pressure_provider_evidence |
Shell, material condition, boundary, load case and pressure basis match exactly. | assessment_id, asset_id 외 21개 |
assessment_id, asset_id 외 15개 |
structural.failure_assessment_history |
All physical input histories and the finite nonincreasing FAD boundary are caller-owned, reviewed and digest-bound. | assessment_id, asset_id 외 17개 |
horizon_start_s, horizon_end_s 외 8개 |
structural.failure_assessment_points |
Deterministic assessment points against a caller-licensed, nonincreasing piecewise-linear FAD boundary; all physical solutions and a… | material_condition_id, curve 외 6개 |
points.toughness_ratio_Kr, points.load_ratio_Lr 외 4개 |
structural.finite_element_result_exchange |
Mesh and result identities, coordinate frame, ordering, quantity definitions and content digests are caller-reviewed metadata. | exchange_id, asset_id 외 28개 |
exchange_id, asset_id 외 13개 |
structural.mean_shear_stress |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, physical_scope_id 외 3개 |
signed_mean_shear_stress_Pa |
structural.nozzle_local_stress_provider_evidence |
Geometry, load component and stress metric units are exact caller/provider tokens. | assessment_id, asset_id 외 20개 |
assessment_id, load_case_id 외 8개 |
structural.pitting_ffs_provider_evidence |
Component, material, coordinate frame, pressure and load bases are caller-reviewed exact identities. | assessment_id, asset_id 외 29개 |
assessment_id, asset_id 외 9개 |
structural.planar_stress_linearization |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, physical_scope_id 외 6개 |
thickness_m, membrane_stress_Pa 외 5개 |
structural.pressure_temperature_envelope |
Caller-reviewed positive pressure limit at strictly increasing absolute-temperature knots; piecewise-linear interpolation is restric… | envelope_id, applicability_basis 외 6개 |
point_ids, allowable_pressures_Pa 외 11개 |
structural.pressure_temperature_ramp_limits |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, history_id 외 13개 |
history_id, component_id 외 7개 |
structural.profile_capacity |
Nodal axial blunt-loss area scan with exact caller-matched reference pressure and bounded nondecreasing bulging table; no automatic … | geometry_id, material_condition_id 외 10개 |
declared_model_pressure_difference_capacity_Pa, minimum_measured_thickness_m 외 3개 |
structural.profile_capacity_corrosion_scenario |
The supplied axial remaining-thickness profile is re-evaluated after a caller-declared spatially uniform constant loss rate over a f… | scenario_id, profile 외 2개 |
baseline_pressure_difference_capacity_Pa, forecast_pressure_difference_capacity_Pa 외 11개 |
structural.profile_capacity_rate_field_scenario |
A caller-provided axial-by-time rate field is integrated nodewise and passed to the same reviewed profile-capacity provider. | scenario_id, profile 외 3개 |
baseline_pressure_difference_capacity_Pa, forecast_pressure_difference_capacity_Pa 외 8개 |
structural.thermal_gradient_discretization_convergence |
All refinement levels share exact geometry, boundary, property, provider and common-query identity. | comparison_id, asset_id 외 29개 |
comparison_id, component_id 외 9개 |
structural.thermal_gradient_observation_comparison |
Measured and predicted histories are paired by reviewed clock and sensor identities. | comparison_id, asset_id 외 27개 |
comparison_id, component_id 외 12개 |
structural.thermal_gradient_parameter_calibration |
Caller-reviewed transient measurements align to supplied baseline and sensitivity responses. | calibration_id, asset_id 외 28개 |
calibration_id, parameter_id 외 13개 |
testing · 재료시험·통계·시험 지표 (7개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
testing.brinell |
Spherical indentation geometry; force and dimensions are SI inputs. | test_force_N, ball_diameter_m 외 1개 |
indentation_hardness_Pa, conventional_HBW |
testing.grain_planimetry_summary |
Caller-reviewed specimen-plane areas, effective boundary counts and logarithmic number calibration are explicit. | basis, physical_specimen_id 외 10개 |
total_effective_count, total_specimen_area_m2 외 3개 |
testing.knoop |
Ideal rhombic projected area from explicitly declared indenter edge angles and measured long diagonal. | test_force_N, long_diagonal_m 외 3개 |
projected_area_m2, ideal_short_diagonal_m 외 3개 |
testing.mating_brinell_hardness_difference |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, mating_pair_id 외 5개 |
signed_first_minus_second_HBW, comparison_interval_lower_HBW 외 1개 |
testing.phase_point_count_summary |
Caller phase labels and immutable image/grid records; same physical specimen and reviewed nonoverlap. | basis, survey_id 외 7개 |
field_summaries, pooled_point_summary |
testing.rockwell_depth |
Caller-defined scale constants and common preliminary-force depth reference; no automatic scale selection. | initial_depth_m, final_depth_m 외 5개 |
permanent_depth_increment_m, hardness_number 외 2개 |
testing.vickers |
Opposite-face diamond angle is 136 degrees; both measured diagonals are explicit. | test_force_N, first_diagonal_m 외 1개 |
indentation_hardness_Pa, conventional_HV |
thermal · 열전도·열이력·열처리 (9개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
thermal.cylindrical_layers |
Concentric cylindrical layers with two convection boundaries and optional outer radiation. | radii_m, conductivity_W_m_K 외 7개 |
heat_rate_outward_W, interface_temperatures_K 외 2개 |
thermal.fire_flux_response |
Reviewed net absorbed boundary flux composed with explicit multilayer transient conduction; no fire curve, ablation or intumescence … | scenario_id, incident_flux_W_m2 외 5개 |
— |
thermal.insulation_surface_balance |
Steady single-layer radial conduction with caller constant convection and gray radiation boundaries. | inner_radius_m, outer_radius_m 외 8개 |
outer_surface_temperature_K, heat_from_inner_surface_W 외 3개 |
thermal.lumped_temperature |
Lumped thermal capacitance; caller specifies the maximum applicable Biot number. | initial_temperature_K, ambient_temperature_K 외 7개 |
biot_number, time_constant_s 외 1개 |
thermal.piecewise_thickness_soak_duration |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, component_id 외 6개 |
component_id, procedure_id 외 5개 |
thermal.planar_layers |
Steady planar one-dimensional conduction with constant per-layer conductivity. | thickness_m, conductivity_W_m_K 외 2개 |
thermal_resistance_K_W, heat_rate_W |
thermal.thickness_scaled_rate_limit |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, component_id 외 11개 |
component_id, procedure_id 외 7개 |
thermal.thickness_soak_duration |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, component_id 외 4개 |
component_id, procedure_id 외 4개 |
thermal.transient_conduction_1d |
One-dimensional planar or radial conduction with caller-supplied property curves, boundaries, distributed convection/gray radiation … | geometry, cell_edges_m 외 19개 |
cell_centers_m, temperature_history_K 외 11개 |
thermo · 열역학 상태·퓨가시티 (6개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
thermo.co2_fugacity_coolprop |
CoolProp pure-component CO2 EOS is evaluated at caller-supplied absolute CO2 partial pressure. | assessment_id, temperature_K 외 6개 |
temperature_K, co2_partial_pressure_Pa 외 6개 |
thermo.co2_mixture_fugacity_coolprop |
CoolProp's caller-configured mixture EOS evaluates the CO2 component fugacity at total pressure and normalized gas mole fractions. | assessment_id, temperature_K 외 9개 |
temperature_K, total_pressure_Pa 외 8개 |
thermo.co2_mixture_fugacity_history |
Evaluate ordered caller-specified gas-mixture CO2 component fugacity at exact PT time knots with CoolProp. | history_id, asset_id 외 6개 |
history_id, asset_id 외 9개 |
thermo.co2_pure_fugacity_history |
Evaluate ordered caller-supplied pure-CO2 PT requests with the selected optional CoolProp backend at exact time points. | history_id, asset_id 외 6개 |
history_id, asset_id 외 8개 |
thermo.coolprop_pure_water_saturated_vapor_fugacity |
Pure-water saturated vapor is evaluated at the caller wall temperature using the requested CoolProp backend. | wall_temperature_K, backend 외 2개 |
wall_temperature_K, saturation_pressure_Pa 외 2개 |
thermo.coolprop_pure_water_single_phase_state |
Pure water is evaluated at the caller absolute-pressure/temperature state with the selected CoolProp backend. | temperature_K, pressure_Pa 외 3개 |
temperature_K, pressure_Pa 외 7개 |
transport · 확산·이온·성분 수송 (15개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
transport.crevice_activity_corrected_nernst_planck_1d |
Fixed-geometry finite-volume transport on caller time knots; diffusivity is constant over the supplied run. | assessment_id, asset_id 외 27개 |
cell_width_m, state_history[].time_s 외 6개 |
transport.crevice_activity_corrected_reactive_nernst_planck_1d |
Caller activity-coefficient cell/time fields drive both the activity-gradient flux term and reversible local mass-action rates. | assessment_id, asset_id 외 34개 |
state_history[].time_s, state_history[].species_concentration_mol_m3_by_id.*[] 외 5개 |
transport.crevice_component_diffusion_1d |
A caller-defined scalar component diffuses along a constant-cross-section one-dimensional crevice with fixed mouth concentration and… | assessment_id, asset_id 외 25개 |
cell_center_position_m, concentration_history[].time_s 외 8개 |
transport.crevice_electroneutral_multispecies_diffusion_1d |
Fixed-geometry one-dimensional finite-volume transport of a caller-defined dilute ionic species set with constant diffusivities. | assessment_id, asset_id 외 23개 |
cell_width_m, state_history[].time_s 외 7개 |
transport.crevice_spatial_activity_solid_nernst_planck_1d |
Each interval uses the existing conservative variable-volume finite-volume Nernst-Planck BDF solver, including caller face areas, ve… | assessment_id, transport 외 13개 |
state_history[].time_s, state_history[].aqueous_concentration_mol_m3_by_species_and_cell.*[] 외 5개 |
transport.crevice_variable_area_activity_corrected_reactive_nernst_planck_1d |
Concentration state is advanced through the conservative cell-mole balance using linearly interpolated caller cell volumes and face … | assessment_id, transport_request 외 19개 |
cell_cross_section_area_m2_by_knot[][], face_cross_section_area_m2_by_knot[][] 외 6개 |
transport.hydrogen_detector_observation |
Instantaneous reviewed Faraday or sample-mass observation identity for a signed hydrogen-atom release history; detector dynamics and… | observation_id, material_condition_id 외 19개 |
elapsed_time_s, outward_hydrogen_atoms_mol_s 외 5개 |
transport.hydrogen_dissociative_surface_rates |
Reviewed hydrogen fugacity, or explicitly reviewed ideal-gas partial-pressure approximation, and two effective Arrhenius surface-cap… | boundary_id, material_condition_id 외 19개 |
elapsed_time_s, temperature_K 외 6개 |
transport.hydrogen_finite_cylinder_kinetic |
Finite axisymmetric radial-axial Fickian transport with separately declared curved/end boundaries, fixed independent dilute traps, r… | material_condition_id, reference_lattice_id 외 28개 |
elapsed_time_s, radial_cell_centers_m 외 10개 |
transport.hydrogen_slab_flow_multiplier_fit |
One reviewed positive history multiplier, calibrated against signed outward planar hydrogen-atom flow with a predeclared calibration… | fit_id, observation_series_id 외 25개 |
physical_surface_area_m2, fitted_multiplier 외 9개 |
transport.hydrogen_slab_kinetic |
Planar Fickian lattice transport with fixed independent dilute trap populations, reviewed detailed-balance or independent-frequency … | material_condition_id, reference_lattice_id 외 24개 |
elapsed_time_s, cell_centers_m 외 10개 |
transport.hydrogen_thermal_rate_fit |
Weighted log-linear calibration of one reviewed effective Arrhenius or fixed-transmission transition-state frequency law with preser… | fit_id, frequency_id 외 19개 |
calibration_temperature_support_K, calibration_temperature_span_K 외 4개 |
transport.hydrogen_trap_equilibrium |
Fast local equilibrium of fixed, independent single-occupancy trap populations in one uniform-temperature material condition. | material_condition_id, reference_lattice_id 외 9개 |
lattice_hydrogen_atoms_mol_m3, lattice_occupancy 외 6개 |
transport.hydrogen_trap_thermal_rates |
Reviewed single-path Arrhenius or transition-state frequency parameters, one common energy reference, a supported absolute-temperatu… | trap_id, material_condition_id 외 11개 |
elapsed_time_s, temperature_K 외 5개 |
transport.semi_infinite_diffusion |
One-dimensional semi-infinite Fickian diffusion with a constant boundary concentration. | diffusivity_m2_s, exposure_s 외 3개 |
concentration_mol_m3, surface_flux_mol_m2_s 외 1개 |
validation · 증거 정렬·비교·검증 지표 (3개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
validation.crevice_repassivation_excursion_duration_history |
Each reported duration covers only an interval bounded by two measured exact knots; no within-interval crossing time is inferred. | assessment_id, asset_id 외 3개 |
intervals[].start_time_s, intervals[].end_time_s 외 4개 |
validation.crevice_repassivation_margin_history |
Threshold and operating potentials refer to the same exact material, test condition, electrolyte record, temperature, reference elec… | assessment_id, asset_id 외 9개 |
potential_margin_history[].time_s, potential_margin_history[].operating_potential_mV 외 3개 |
validation.crevice_wall_sink_source_group_stability |
Only observations predeclared as calibration rows are partitioned; the original independent holdout is never included in any fold. | diagnostic_id, calibration_request 외 5개 |
group_out_of_fold_rmse_log_velocity, group_out_of_fold_mean_log_velocity_bias 외 7개 |
welding · 용접 열·수소·야금·절차 (46개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
welding.arc_energy |
Constant arc voltage/current; thermal efficiency is explicit and procedure-specific. | voltage_V, current_A 외 2개 |
arc_energy_J_m, net_heat_input_J_m |
welding.brazing_bonding_production_campaign_evidence |
Caller-owned campaign criteria only; no qualification claim. | assessment_id, asset_id 외 12개 |
disposition, findings 외 1개 |
welding.brazing_bonding_qualification |
Member ordering, material and surface-condition identities are preserved and compared exactly. | assessment_id, asset_id 외 14개 |
assessment_id, asset_id 외 8개 |
welding.carbon_equivalent_recipe |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, method_id 외 4개 |
carbon_index_mass_percent |
welding.carbon_equivalents |
All elements are mass percent; indices do not prescribe preheat or demonstrate weldability. | C, Mn 외 7개 |
CE_IIW, Pcm |
welding.conductivity_preheat_correlation |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, material_condition_id 외 9개 |
conductivity_reference_temperature_K, temperature_offset_K 외 1개 |
welding.consumable_compatibility |
Base-material pair order is non-directional, while all material-condition, consumable-lot, process and service-environment identitie… | assessment_id, asset_id 외 8개 |
assessment_id, comparison_rows 외 5개 |
welding.cooling_interval |
Caller-selected monotonic cooling branch and caller-supplied target temperatures; not a thermal-cycle prediction. | time_s, temperature_K 외 4개 |
upper_crossing_s, lower_crossing_s 외 10개 |
welding.cooling_interval_batch |
Apply independently caller-selected monotonic cooling branches and threshold pairs to one common recorded history. | time_s, temperature_K 외 6개 |
input_sha256, sample_arrays_sha256 외 8개 |
welding.cooling_interval_sensor_batch |
Apply sensor-local cooling branches to aligned traces sharing one explicit clock. | time_s, sensor_traces 외 4개 |
input_sha256, sample_arrays_sha256 외 7개 |
welding.cooling_time_correlation |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, heat_flow_dimension 외 12개 |
cooling_interval_s |
welding.declared_consumable_deposition_rate |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, process_id 외 8개 |
arc_on_feed_mass_rate_kg_s, arc_on_deposited_feed_mass_rate_kg_s 외 1개 |
welding.declared_flux_basicity_ratio |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, flux_condition_id 외 5개 |
basicity_ratio, weighted_numerator 외 1개 |
welding.declared_hydrogen_susceptibility_index |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, material_condition_id 외 10개 |
material_condition_id, hydrogen_definition_id 외 7개 |
welding.dilution |
Known constituent melted masses and reported elemental fractions; no inferred elemental balance or dilution threshold. | constituents, requested_elements |
total_melted_mass_kg, role_mass_fractions 외 1개 |
welding.dilution_with_uncertainty |
Provenance-pinned declared melted constituent chemistry with a full caller-supplied joint covariance and explicit variable order. | constituents, requested_elements 외 7개 |
total_melted_mass_kg, role_mass_fractions 외 3개 |
welding.dissimilar_weld_applicability_evidence |
Base A/B, deposited layers, fusion-boundary sides, procedures, thermal history and service environment retain exact identities. | assessment_id, asset_id 외 25개 |
assessment_id, asset_id 외 20개 |
welding.duplex_phase_balance |
Region, material, welding-process and thermal-history identities are reviewed caller records. | assessment_id, asset_id 외 17개 |
assessment_id, selected_envelope_id 외 5개 |
welding.flux_moisture_hydrogen |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, combined_water_mass_fraction 외 11개 |
hydrogen_volume_m3_H2_kg_deposit |
welding.hardness_mapping |
Weld identity, exact test configuration, coordinates, caller regions, readings, uncertainty and lineage are preserved. | assessment_id, asset_id 외 16개 |
report_schema_version, assessment_id 외 13개 |
welding.hardness_traverse |
Declared per-region upper hardness requirements and expanded measurement intervals, without spatial extrapolation. | method_id, test_force_N 외 4개 |
regions[].peak_hardness_Pa, regions[].declared_upper_limit_Pa |
welding.heat_treatment_history |
Complete sensor histories on one clock; all sensors must occupy the declared hold band simultaneously. | time_s, sensor_temperature_K 외 2개 |
simultaneous_hold_intervals_s, total_simultaneous_hold_s 외 4개 |
welding.hot_tap_applicability |
Host pipe, material condition and operating pressure basis are exact caller-reviewed identities. | assessment_id, asset_id 외 26개 |
assessment_id, physical_scope_id 외 7개 |
welding.hydrogen_bakeout_slab |
One-dimensional finite planar diffusion screening with an initially uniform diffusible-hydrogen field, zero concentration on both re… | procedure_id, material_condition_id 외 14개 |
elapsed_time_s, temperature_K 외 8개 |
welding.joint_profile |
Transverse equal-reference surface observations outside an explicitly excluded joint zone. | transverse_position_m, measured_surface_height_m 외 3개 |
signed_surface_offset_at_joint_m, signed_angular_mismatch_rad 외 4개 |
welding.lamellar_tearing_applicability |
Parent material, product form, material condition and directionality identity match caller qualification evidence exactly. | assessment_id, asset_id 외 18개 |
assessment_id, asset_id 외 8개 |
welding.local_heat_treatment |
Sensor positions and synchronized histories are reviewed caller records. | assessment_id, asset_id 외 14개 |
assessment_id, selected_envelope_id 외 5개 |
welding.measured_energy_per_length |
Measured source energy and deposited length cover the same observation interval. | source_energy_J, weld_length_m 외 1개 |
source_energy_per_length_J_m, net_heat_input_J_m |
welding.peening_treatment_evidence |
Component, material, zones, treatment clock, method, media, equipment and direction are caller reviewed. | assessment_id, asset_id 외 17개 |
assessment_id, component_id 외 12개 |
welding.power_travel_energy |
Source power and travel speed are constant over the declared weld interval. | source_power_W, travel_speed_m_s 외 1개 |
source_energy_per_length_J_m, net_heat_input_J_m |
welding.preheat_history_binding |
Exact required sensor surface/placement/scope/clock roles and explicit phase windows; caller-owned unique procedure envelope. | basis, template 외 6개 |
derived_metrics.minimum_recorded_preheat_temperature_K, derived_metrics.maximum_recorded_interpass_temperature_K 외 4개 |
welding.preheat_procedure_envelope |
Material, joint, process, consumable, hydrogen-control and restraint identities match exactly. | assessment_id, asset_id 외 24개 |
assessment_id, selected_envelope_id 외 7개 |
welding.production_weld_test_campaign_evidence |
Caller criteria only; no WPS or code qualification claim. | assessment_id, asset_id 외 12개 |
disposition, findings 외 1개 |
welding.production_weld_test_evidence |
Production-weld, procedure, material-lot and consumable-lot identities are caller-reviewed. | assessment_id, asset_id 외 19개 |
assessment_id, production_weld_id 외 14개 |
welding.reheat_cracking_applicability |
Material, weld, HAZ and welding-process identities are exact caller-reviewed tokens. | assessment_id, asset_id 외 24개 |
assessment_id, physical_scope_id 외 8개 |
welding.repair_welding |
Caller criteria only; no WPS qualification or life inference. | assessment_id, asset_id 외 12개 |
disposition, findings 외 1개 |
welding.repair_welding_history |
Recorded repair steps use one reviewed clock, remain ordered and cannot overlap. | history_id, asset_id 외 14개 |
history_id, selected_workflow_envelope_id 외 13개 |
welding.residual_stress_evidence |
Each residual-stress value retains its declared tensor-component meaning and coordinate frame. | assessment_id, asset_id 외 13개 |
assessment_id, weld_id 외 19개 |
welding.rosenthal_3d_point_source_temperature |
Steady three-dimensional moving point source in a semi-infinite homogeneous solid with constant properties. | absorbed_power_W, travel_speed_m_s 외 14개 |
thermal_diffusivity_m2_s, temperature_K 외 2개 |
welding.rosenthal_cooling_interval |
Compose a fixed-point sampled Rosenthal moving-source history with caller-selected cooling-branch interval extraction. | thermal_history, upper_temperature_K 외 3개 |
thermal_history_sha256, rosenthal_request_sha256 외 14개 |
welding.solidification_cracking_applicability |
Weld-metal condition, process, consumable classification and chemistry basis match exactly. | assessment_id, asset_id 외 21개 |
assessment_id, asset_id 외 9개 |
welding.temper_bead_qualification |
Repair scope, joint, base/deposited material conditions and process match exactly. | assessment_id, asset_id 외 18개 |
assessment_id, asset_id 외 12개 |
welding.waveform_energy |
Time-aligned sampled arc voltage/current; resolution must resolve the actual waveform. | time_s, voltage_V 외 3개 |
arc_energy_J, net_heat_input_J_m |
welding.waveform_energy_uncertainty |
The full covariance follows the fixed coordinate order of every voltage sample, every current sample, efficiency, and travel distanc… | assessment_id, waveform 외 13개 |
arc_energy_J, net_heat_input_J_m 외 6개 |
welding.well_mixed_gas_purge |
Inputs, coefficients, unit conventions, applicability and use rights are caller-reviewed and digest-pinned. | basis, compartment_id 외 9개 |
history[].end_time_s, history[].volume_exchanges 외 1개 |
welding.wps_qualification_envelope |
Qualified-procedure, revision, material-side, joint and welding-process identities match exactly. | assessment_id, asset_id 외 16개 |
assessment_id, selected_envelope_id 외 16개 |
workflow · 사용자 기준과 평가 절차 (2개)
| 단위 API / 상세 설명 | 목적 | 주요 입력 | 선언 출력 |
|---|---|---|---|
workflow.pressure_fatigue |
Neutral operating history mapped through explicitly bounded membrane stress and user-calibrated fatigue parameters. | history, external_absolute_pressure_Pa 외 14개 |
counted_cycles, initial_damage 외 3개 |
workflow.service_category_screening |
Caller profiles bind code edition, equipment boundary, authority and reviewed evidence. | basis, assessment_id 외 9개 |
category_findings, matched_profile_ids |
커스터마이징과 다른 시스템 연동
- 실제 재료·표면·환경·하중·시간·검사 위치를 고정하고 근거를 준비합니다.
- 필요한 단위 API를 고른 뒤
describe()로 계약과 가정을 확인합니다. - 계수·물성·판정표는 해당 근거와 적용 범위를 함께 제공합니다. 외부 공급자는 ID/revision·설정·자료 해시로 구분합니다.
- 선행 결과 전체와 문맥·해시를 다음 모듈에 전달하고, 좌표·단위·압력 기준·물리 범위가 맞는지 확인합니다.
- 사용자 규칙은 별도 선언하고 계산 결과와 규칙 판정 상태를 따로 저장합니다.
열역학이 필요한 기능에는 CoolProp 상태·퓨가시티 연동이 있습니다. 위험성 평가와의 연결에는 명시적 확률 의미를 가진 교환 계약을 사용합니다. FTA는 가능한 후속 소비자의 한 예이며 결정론적 두께 손실 자체에서 고장확률을 자동 생성하지 않습니다. 연동 설계, Python API, 확장 요청서를 참고하세요.
검증 현황과 공개 버전 한계
| 확인 항목 | 기록된 결과 | 해석 범위 |
|---|---|---|
| 공개 입력 스키마 | 757/757 API 일치 | 입력 계약 제공 여부 |
| 핵심 API 전수 실행 | 230/232개 계산 | 2개는 실측 초기 두께·기초 관측자료 사용권한 필요 |
| 대표 기준값·물리 항등식 | 63개 군, 79개 시험 통과 | 모든 하위 분기·실험 검증을 뜻하지 않음 |
| 추가 불변량·보존법칙 | 57개 시험 통과 | 대표 수소·열수지 재검사 포함, 위 묶음과 일부 중복 |
| 공개 전 추가 시험 | 25/25개 통과 | 누락 변수·경계·선택 의존성·배포 경계 |
| 주 JSON 예제 실행 | 400/400개 통과 | 주 파일에 전체 API 예제가 들어 있는 것은 아님 |
| 설치 wheel 수치 시험 | 59/59개 통과 | 작업 소스 폴더 밖의 실제 설치본 사용 |
| 기본/전체 설치본 | 2/2개 코드·카탈로그 일치 | 기본 설치에 SciPy·CoolProp 없이 동작 |
알려진 미해결 사항: 전체 Ruff 정적 지적 885건, 주 예제 파일의 전체 API 포함 검사 1건, 정상 전수 실행의 외부 근거 보류 2건을 남겨 둡니다. 기존 엄격한 전체 검증 workflow는 이 상태를 숨기지 않고 실패를 표시할 수 있습니다. 알파 배포용 검사는 별도 범위로 표시하며 전체 검증을 대체하지 않습니다. 근거 파일·시험 묶음이 중복되므로 위 숫자를 더해 검증 모델 수를 만들지 않습니다.
자세한 상태는 공개 전 점검, 개별 실행, 물리 검토, 개발·검증 이력에 기록합니다.
연구와 개발을 이어가는 방법
python -m pytest -q tests/test_physical_consistency_review.py
python scripts/verify_core_physics_formulas.py
python scripts/audit_schema_coverage.py
python scripts/audit_public_source_boundary.py
# 기존의 엄격한 전체 검증. 알려진 미해결 항목 때문에 실패할 수 있음.
python scripts/verify.py
연구 재개 설명서에는 현재 숫자의 분모, 저장 위치, 재현 순서, 데이터 취득과 권리 검토, 모델 추가, HPC 병렬 검사, 관련 저장소 확장 요청, 다음 검증 우선순위를 정리했습니다. 이 채팅이 없어도 저장소의 문서·스키마·시험·영수증에서 이어갈 수 있도록 유지합니다.
저작권·자료·보안
코드는 MIT로 공개합니다. 외부 데이터·라이브러리·규격·상업 공급자의 권리는 각각 유지되며 MIT가 이를 대신 허가하지 않습니다. 원자료·서적·문서 파일·실험 워크북·장치 원시 신호·로컬 실행 로그·인증정보는 공개 배포에 포함하지 않습니다. 공개 데이터라고 해서 기초 관측자료까지 자동으로 재배포 가능한 것으로 판단하지 않습니다.
모델명·일반적인 물리 법칙·독립적으로 작성한 수식 구현·자체 합성 검사를 식별 가능하게 문서화합니다. 근거는 THIRD_PARTY_NOTICES와 출처 카탈로그에 분리해 기록합니다. 권리·문장·배포 경계 검사는 위험을 줄이기 위한 확인이며 법적 무위험 인증은 아닙니다. 기여 방법 · 보안 제보 · 변경 이력 · 인용.
1 maintainer
Metadata
1 maintainer
Release files for materials-corrosion-toolkit 0.1.0a1
For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.
Source distribution (sdist)
| File | Size | Uploaded | Provenance | Actions |
|---|---|---|---|---|
| materials_corrosion_toolkit-0.1.0a1.tar.gz | 11.1 MB | With provenance | Details for materials_corrosion_toolkit-0.1.0a1.tar.gz |
Built distribution (wheel)
| File | Interpreter | ABI | Platform | Actions Reset |
|---|---|---|---|---|
| materials_corrosion_toolkit-0.1.0a1-py3-none-any.whl | Python 3 | none | any | Details for materials_corrosion_toolkit-0.1.0a1-py3-none-any.whl |
Total release size: 15.0 MB
Release files / materials_corrosion_toolkit-0.1.0a1.tar.gz
| Download URL | materials_corrosion_toolkit-0.1.0a1.tar.gz |
|---|---|
| Size | 11.1 MB |
| Tags | Source |
|
SHA-256 checksum How to use checksums |
b8c18c228b025de99946f707fbfb052e39215d3613c59444cbf3b8911f65f54b
|
|
BLAKE2b-256 checksum How to use checksums |
e8102c22c6a57ccbe2aa8fe72214c4aa3dacc2c23512c3dc2266ed9c9cc45846
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.16
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Nov 2, 2026.
Transparency logRelease files / materials_corrosion_toolkit-0.1.0a1-py3-none-any.whl
| Download URL | materials_corrosion_toolkit-0.1.0a1-py3-none-any.whl |
|---|---|
| Size | 3.9 MB |
| Tags | Python 3 |
|
SHA-256 checksum How to use checksums |
ebe93c986aa73395e4cd447c52c1d81348c523947e37ca59db79c016aa09e4c8
|
|
BLAKE2b-256 checksum How to use checksums |
00dffd6eae6ba0144d8b5753bc56245140916d7fadf0e72bc45bd17a6cdba958
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.16
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Nov 2, 2026.
Transparency logSecurity for materials-corrosion-toolkit 0.1.0a1
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
Full provenance
All 2 files in this release have been uploaded with provenance metadata.
Attestation for materials_corrosion_toolkit-0.1.0a1.tar.gz
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Nov 2, 2026.
Transparency logA note on package security
PyPI is a repository for distributing packages, not a service for auditing them. While third-party security researchers and our staff do their best to detect and remove malicious packages, PyPI cannot guarantee the quality, security or suitability of any given package.
To learn more about protecting yourself from malicious actors, visit our package security documentation.
