matt-projectforge 0.7.1

A CLI wrapper that scaffolds new projects using AI coding tools with your conventions baked in.

ProjectForge

Run projectforge --name atlas --stack fastapi --description "Customer support API" --verify and get a working starter repository shaped by your conventions—not just a pile of generated files. ProjectForge scaffolds Python and TypeScript projects through Claude Code, Google Antigravity CLI, or Codex CLI, then installs, checks, and verifies the result.

A live scaffold usually takes minutes rather than seconds because providers write code and Forge runs the generated project's checks. Duration varies by stack and provider; forge --dry-run previews the complete plan instantly and makes no provider call.

The result includes the project, its development commands, and local evidence showing what was requested, which conventions and providers were used, and whether verification actually passed.

Command name: current source installs projectforge as the preferred command and keeps forge as a compatibility alias. Use projectforge if Foundry's Ethereum forge is already on your PATH; shell command names cannot disambiguate the two tools.

Release status: this README documents ProjectForge v0.7.1. Use the documentation bundled with an immutable release for that release's exact behavior.

What you get

• Interactive and flag-driven scaffolding for seven Python and TypeScript stacks.
• Metadata-aware install, lint, type-check, build, test, and health verification.
• A generated README, development setup, and stack-specific starter structure.
• Zero-provider-call prompt previews with --dry-run.
• Failure recovery with --resume instead of paying to rerun completed phases.

Why trust the output

• Forge shows the complete prompt before execution and uses bounded provider workspaces by default.
• forge doctor checks installation and authentication without a model call or credential output.
• Provider-default models remain in control unless you deliberately request an override.
• Convention layers are deterministic and recorded with source hashes.
• Blanket provider bypass requires two explicit unsafe flags.
• Atomic progress, failure classification, and resume contracts preserve partial work safely.
• Provider and local-tool failures are converted into bounded, privacy-safe recovery guidance instead of echoing untrusted output, stack traces, or machine paths.
• .forge/ records distinguish “provider finished” from “generated project verified.”

Supported stacks

Stack	Identifier	Aliases
Next.js + React	nextjs	next, react
FastAPI	fastapi	api
FastAPI + AI/LLM	fastapi-ai	ai, llm
Next.js + FastAPI monorepo	both	fullstack, monorepo
Python CLI	python-cli	cli, typer
TypeScript package	ts-package	npm-package, library
Python worker	python-worker	worker, service

See the stack guide for generated structures and commands.

Requirements

• Python 3.12 or 3.13. CI covers both versions on Ubuntu and macOS.
• uv for the GitHub install route.
• At least one installed and authenticated provider CLI for live generation. Preview does not need a provider.

Use the current source

The v0.7.1 behavior documented below is available from the current repository checkout:

git clone https://github.com/Schramm2/projectforge.git
cd projectforge
uv sync --dev
./forge --version
./forge --help

Run ./forge from the checkout anywhere this guide shows forge.

Install the latest published release

Install the PyPI distribution with uv or pipx:

uv tool install matt-projectforge
# or
pipx install matt-projectforge
projectforge --version
projectforge --help

Or install from the supported Homebrew tap:

brew install schramm2/tap/projectforge
projectforge --version

ProjectForge is the product, repository, Python package, and Homebrew formula name. PyPI required the distinct matt-projectforge distribution name because projectforge was too similar to an existing project. projectforge is the preferred command, while forge remains a short compatibility alias.

Install and authenticate a provider

Provider credentials stay inside the provider's own CLI. Forge does not install a provider, collect a token, or print account identity.

Provider	Official setup	Provider-owned login	Forge readiness
Claude Code	Install	claude auth login	Deterministic status check
Codex CLI	Install	codex login	Deterministic status check
Google Antigravity CLI	Install (source)	Run agy; follow the official usage and sign-in flow in the browser or over SSH	agy models check; no model prompt or quota usage

After provider login, run:

forge doctor
forge doctor --json

A live scaffold requires one provider reported as ready. Missing optional providers do not block the run. For Antigravity, Forge checks agy --version and agy models. The latter verifies the saved Google session without sending a prompt or printing account identity. If sign-in is needed, run agy, complete the provider-owned browser flow, exit with /exit, and rerun forge doctor. Remote SSH sessions display an authorization URL and code flow instead of opening a browser.

Preview first

This command creates no project, starts no provider process, and makes no model call:

forge --dry-run \
  --name atlas \
  --stack fastapi \
  --description "Customer support API" \
  --no-docker \
  --no-open

Review the target, phase routing, provider-default versus overridden models, approval mode, convention-source summary, and prompt content. Add --verbose to display full source paths and hashes. An exported prompt can contain private conventions; treat it as sensitive.

Run safely

Use the same requirements for the live run:

forge \
  --name atlas \
  --stack fastapi \
  --description "Customer support API" \
  --no-docker \
  --approval-mode safe \
  --no-open \
  --verify

safe is the default. Before the first call, Forge shows the workspace, providers, model behavior, remaining provider CLI invocations, a numeric duration range, the last measured duration for the same stack, per-provider quota context, a rough cost range, execution strategy, and demo and verification limits. Live execution sends the assembled brief, conventions, and selected context to the provider. The provider may edit the target workspace, install dependencies, run commands, use allowed network access, and consume quota.

--approval-mode plan uses a read-only provider mode but still makes provider calls. --approval-mode unsafe --allow-unsafe disables provider approval or sandbox boundaries and should only be used inside an external isolation boundary you control.

For Antigravity specifically, safe mode uses headless --print, accept-edits, and its terminal sandbox. Workspace file edits can proceed, while commands that are not allowed by Antigravity's permission policy may be denied in non-interactive print mode. Forge uses --dangerously-skip-permissions only for the explicitly consented unsafe mode.

Demo mode is enabled by default so generated startup should not require real service credentials. It does not remove the provider CLI's own authentication requirement.

Verify the result

Forge writes these project-local records:

File	Evidence
.forge/progress.json	Prompt hashes, attempts, durations, failure category, and resume state
.forge/scaffold.json	Requested facts, routing, models, approval mode, and convention hashes
.forge/conventions-snapshot.md	Exact convention replay input; potentially private
.forge/context-snapshot.md	User-approved project brief and selected nearby context; potentially private
.forge/verification.json	Redacted commands, working directories, timeouts, exits, endpoints, and remediation

The dashboard reports Project Ready only when required verification passes. If verification was disabled or skipped, the honest result is Project Created; a failed check requires attention. For high-confidence delivery, rerun the generated project's recorded commands independently.

A generated Python project can declare bounded health settings:

[tool.forge.verification]
health_endpoints = ["/healthz", "/readyz"]
health_startup_timeout = 20
health_request_timeout = 4

Health paths remain localhost-only and timeout values are bounded by Forge.

Resume a failed scaffold

Do not delete partial output or blindly restart. Fix the provider problem, then repeat the original command with --resume:

forge \
  --name atlas \
  --stack fastapi \
  --description "Customer support API" \
  --no-docker \
  --approval-mode safe \
  --no-open \
  --verify \
  --resume

Forge checks the original name, stack, routing, prompt hashes, and approval mode. It preserves completed phases and retries incomplete ones. Contract drift is rejected rather than silently mixing two scaffolds.

Teach Forge how you work

First-run setup asks how Forge should handle conventions. You can start with the bundled defaults, import nearby AGENTS.md, CLAUDE.md, or Copilot instructions, or answer a short interview that creates and selects a reusable profile. Rerunning setup preserves the selected profile unless you choose another option.

Each interactive scaffold gathers project context separately. The short project brief covers the intended users, first useful outcome, and constraints. Forge can also show a bounded list of nearby Markdown files; no file content is included unless you select it. Selected files are secret-scanned before being added to the provider prompt.

Effective convention precedence is bundled defaults, selected user profile, ~/.forge/conventions.md, then project-local .forge/conventions.md. Later layers have higher precedence.

forge conventions init team
forge conventions import ./AGENTS.md --name imported-team
forge conventions list
forge conventions select team
forge conventions inspect --stack fastapi --json
forge conventions preview --stack fastapi
forge conventions validate --stack fastapi
forge conventions edit team

Imports must be Markdown, are size-bounded, and reject credential-shaped content. Repository maintainers use the separate forge admin conventions command for bundled convention sources.

Other commands

forge                         # Interactive scaffold
forge doctor                  # Readiness diagnostics, no model call
forge stats                   # Local scaffold analytics
forge stats --repair          # Quarantine recognizable legacy pytest artifacts
forge check                   # Read-only convention audit
forge check --fix             # Add supported missing convention files
forge evolve auth --dry-run   # Preview an existing-project change
forge evolve auth             # Apply it in safe mode
forge replay --dry-run        # Preview from recorded manifest/snapshot
forge replay --diff           # Replay and compare in safe mode

Run root or subcommand --help immediately before scripting a command; live help is the runtime contract.

Agent skill

The release archive includes skills/forge-scaffold/SKILL.md; the wheel installs the same files under projectforge/skills/forge-scaffold/. The skill teaches agents to discover live Forge behavior, preview with zero calls, preserve safe approval boundaries, and verify durable evidence without hard-coded release or model catalogs. Its behavioral evidence is in the maintainer record.

Security, privacy, and support

Read Security and Privacy before using private conventions or unsafe mode. Report vulnerabilities through SECURITY.md; use GitHub Issues for ordinary bugs.

Upgrade or uninstall

See the 0.4.1 migration guide before upgrading.

uv tool upgrade matt-projectforge
# or
brew upgrade schramm2/tap/projectforge

Uninstall the application with the matching package manager:

uv tool uninstall matt-projectforge
# or
brew uninstall projectforge

User-owned config, profiles, snapshots, and local history under ~/.forge/ are not removed. Back them up or move that directory separately if you no longer need them.

Documentation

• Getting Started
• Product and user-flow diagrams
• Configuration
• Stacks
• Troubleshooting
• Provider compatibility evidence
• PyPI release runbook
• Documentation map

Development

uv sync --dev
uv run python scripts/scan_safety.py
uv run python scripts/check_docs.py
uv run ruff check src/projectforge tests
uv run pytest
uv build

The canonical Python import namespace in current source is projectforge; ubundiforge was the v0.6.0-and-earlier source namespace and is not present on main. See AGENTS.md and the maintainer docs before changing release behavior.

License

MIT — see LICENSE.