meetcap 2.0.0

Offline meeting recorder & summarizer for macOS

meetcap

Offline meeting recorder & summarizer for macOS

Features

• Records both system audio and microphone simultaneously
• 100% offline operation - no network connections
• Local transcription using Parakeet TDT (default, Apple Silicon) or Whisper
• Local summarization using Qwen3.5-4B via MLX (Apple Silicon native)
• Speaker diarization via sherpa-onnx (identifies who said what)
• Simple CLI workflow: start recording → stop with hotkey → get transcript & summary

Installation

Prerequisites

1. Install ffmpeg:

   brew install ffmpeg
   

2. Install BlackHole (for system audio capture):

   • Download from: https://github.com/ExistentialAudio/BlackHole
   • Install the 2ch version

   Why BlackHole? macOS doesn't provide a native way to capture system audio (sounds from other apps, video calls, etc.) as an input source. BlackHole creates a virtual audio device that routes system output into an input that meetcap can record.

3. Configure Audio Routing:

   Open Audio MIDI Setup (Applications → Utilities) and create two devices:

   Step 1: Multi-Output Device (so you can hear AND record system audio):

   • Click "+" → Create Multi-Output Device
   • Check: Built-in Output (or your preferred speakers/headphones)
   • Check: BlackHole 2ch
   • Right-click this device → "Use This Device For Sound Output"
   • Name it "Multi-Output Device" (or similar)

   Step 2: Aggregate Device (combines system audio + microphone):

   • Click "+" → Create Aggregate Device
   • Check: BlackHole 2ch (captures system audio routed from step 1)
   • Check: Your Microphone (Built-in Microphone, USB mic, etc.)
   • Set your microphone as clock source (right-click → Use This Device as Clock Source)
   • Check Drift Correction for your microphone
   • Name it "Aggregate Device" (or similar)

   How it works: System audio flows to Multi-Output → BlackHole → Aggregate Device, where it combines with your microphone for recording.

4. Models (selected and downloaded during setup):

   • Whisper models: large-v3 (default), large-v3-turbo, or small
   • Vosk models (with speaker identification): small (507MB), standard (1.8GB), or gigaspeech (3.3GB)
   • LLM models: Qwen3.5-4B (default, ~2.9GB), Qwen3.5-9B (~5.6GB)

Install meetcap

macOS (Apple Silicon recommended):

pip install "meetcap[mlx-stt]"

Other platforms or Intel Macs:

pip install "meetcap[stt]"

With Vosk for speaker identification:

pip install "meetcap[vosk-stt]"

First-time setup:

# Run interactive setup wizard (downloads models, tests permissions)
meetcap setup

# Quick system verification
meetcap verify

# See all available commands
meetcap --help

Note: The mlx-stt extra includes MLX Whisper for faster transcription on Apple Silicon. The stt extra uses faster-whisper which works on all platforms.

Usage

Basic Recording

# Start recording (uses default/best audio device)
meetcap record

# Press ⌘+⇧+S or Ctrl-C to stop recording

Process Existing Audio Files

# Transcribe and summarize an existing audio file
meetcap summarize path/to/meeting.m4a

# Specify output directory
meetcap summarize recording.m4a --out ./results

Reprocess Recordings

# Reprocess both transcript and summary with different models
meetcap reprocess 2025_Jan_15_TeamStandup

# Reprocess only the summary (keep existing transcript)
meetcap reprocess 2025_Jan_15_TeamStandup --mode summary

# Use a different STT engine for transcription
meetcap reprocess /path/to/recording --stt mlx

# Use a custom LLM model for summarization
meetcap reprocess recording_dir --llm ~/.meetcap/models/custom_model.gguf

# Skip confirmation prompt
meetcap reprocess recording_dir --yes

The reprocess command allows you to regenerate transcripts and summaries with different models, useful for:

• Testing different STT engines (faster-whisper vs mlx-whisper)
• Trying different LLM models for better summaries
• Fixing issues with previous processing
• Experimenting with model settings

Commands

# First-time setup (interactive wizard)
meetcap setup

# List available audio devices
meetcap devices

# Quick system verification
meetcap verify

# Start recording a meeting
meetcap record --device "Aggregate Device" --out ~/MyRecordings

# Process existing audio file (m4a, wav, mp3, etc.)
meetcap summarize samples/meeting.m4a --out ./processed

# Reprocess a recording with different models
meetcap reprocess 2025_Jan_15_TeamStandup --mode stt

Configuration

Edit ~/.meetcap/config.toml to customize:

• Default audio device
• STT engine selection (faster-whisper, mlx-whisper, vosk)
• Model settings (defaults to auto-downloaded models)
• Hotkey combinations
• Output directories

Models are automatically downloaded to ~/.meetcap/models/ on first use.

STT Engine Options

meetcap supports multiple speech-to-text engines:

1. Faster-Whisper (default on Intel Macs):

   • Best accuracy for general transcription
   • Models: large-v3, large-v3-turbo, small
   • Use: --stt fwhisper

2. MLX-Whisper (default on Apple Silicon):

   • Optimized for Apple Silicon performance
   • Models: large-v3-turbo, large-v3-mlx, small-mlx
   • Use: --stt mlx

3. Vosk (speaker identification):

   • Offline speech recognition with speaker diarization
   • Identifies different speakers in the meeting
   • Models: small (507MB), standard (1.8GB), gigaspeech (3.3GB)
   • Use: --stt vosk
   • Enable diarization in config:

   [models]
   stt_engine = "vosk"
   enable_speaker_diarization = true
   

Speaker identification improves summaries by attributing statements to specific speakers.

Permissions

Grant these permissions to your terminal app:

1. Microphone: System Preferences → Privacy & Security → Microphone
2. Input Monitoring: System Preferences → Privacy & Security → Input Monitoring

Troubleshooting

Audio Setup Issues

No audio devices found:

• Ensure BlackHole is installed and Audio MIDI Setup devices are created
• Run meetcap devices to list available devices
• Try restarting your terminal or system after setup

Can't hear system audio during recording:

• Check that Multi-Output Device is set as system output (right-click in Audio MIDI Setup)
• Ensure Built-in Output is checked in your Multi-Output Device
• Test by playing music - you should hear it through your speakers

Recording only captures microphone or only system audio:

• Verify Aggregate Device includes both BlackHole 2ch AND your microphone
• Check that microphone is set as clock source in Aggregate Device
• Ensure Drift Correction is enabled for your microphone
• Use meetcap record --device "Aggregate Device" to specify the device explicitly

Volume control keys causing errors:

• This is a known compatibility issue with some pynput versions - the app should continue working normally despite the error message

Output Files

Each recording session creates a dedicated folder with all meeting artifacts organized together:

~/Recordings/meetcap/
├── 2025_Jan_15_TeamStandup/
│   ├── recording.opus                # Audio recording (OPUS format, default)
│   ├── recording.transcript.txt      # Plain text transcript
│   ├── recording.transcript.json     # Transcript with timestamps
│   └── recording.summary.md          # Meeting summary with AI-generated insights
├── 2025_Jan_16_ProductReview/
│   └── ... (same structure)
└── ...

Folder Naming Convention

Meeting folders are automatically named using:

• Date: YYYY_MMM_DD format (e.g., 2025_Jan_15)
• Title: AI-generated from meeting content in PascalCase (e.g., TeamStandup)

The AI analyzes your meeting transcript to generate a concise, descriptive title that captures the main topic discussed.

Configuring Output Directory

The default output directory is ~/Recordings/meetcap/. You can change this:

1. During setup: Run meetcap setup and specify your preferred directory
2. In config file: Edit ~/.meetcap/config.toml:

   [paths]
   out_dir = "~/Documents/MyMeetings"  # Your custom path
   

3. Via environment variable:

   export MEETCAP_OUT_DIR="~/Documents/MyMeetings"
   

License

MIT