meok-aquaponics-monitor-mcp 1.0.4

Unified sensor + actuator schema MCP for aquaculture / aquaponic / koi systems. Wraps Atlas Scientific EZO, Whitebox Tentacle T1 MkII, Seneye, GHL ProfiLux, Bluelab Edenic, DFRobot Gravity. Species welfare safe-ranges, care-gated actuation, SOV3 attestation handoff. Underwrites MEOK PondSense open hardware. From MEOK AI Labs.

MEOK Aquaponics Monitor MCP

Unified sensor + actuator schema for aquaculture, aquaponics, and koi systems

Why this exists

Every aquaculture monitoring product on the market today picks one hardware family and locks you in: Bluelab cloud-only, Edenic, GHL ProfiLux web API, Atlas Scientific raw I²C, Seneye USB. There is no single SaaS layer that lets a UK trout farm, a hobbyist aquaponic grower, and a high-end koi keeper read their water chemistry through one API — and certainly none that gates every reading against the welfare safe-range for the species in the tank, or routes any actuation through a care membrane before firing a peristaltic pump at live animals.

This MCP is that layer. It is the software side of the MEOK PondSense open hardware kit (fork of the OSHWA-certified Whitebox Labs Tentacle T1 MkII baseboard, PA12-CF printed IP67 enclosure on Qidi Max4, optional RPi5 or ESP32-S3 compute, CSOAI stamp).

Tools

Tool	Description
list_supported_hardware	Vendor matrix — Atlas Scientific, Whitebox Tentacle, Seneye, GHL ProfiLux, Bluelab, DFRobot.
register_rig	One-time registration of a sensor rig + species + probes installed.
report_readings	Push readings; per-parameter status against species safe-range; welfare alerts; signed attestation fingerprint.
safe_range_check	Stateless: check arbitrary readings against any supported species.
species_catalogue	List supported species + their welfare safe-range library (RSPCA / WOAH / Stirling OWI derived).
dose_actuator	Record actuation INTENT (dose pump volume + reason); care-gated by default — routes through SOV3 attestation API before firing.
rig_status	Last-known state for a registered rig.

Installation

pip install meok-aquaponics-monitor-mcp

Supported species

rainbow_trout, atlantic_salmon_smolt, koi, tilapia, aquaponic_lettuce_companion, tropical_community. Each carries pH / DO / NH3-N / NO2-N / NO3-N / temp / EC / alkalinity safe-ranges sourced from RSPCA Assured, WOAH Aquatic Code, and the Stirling Institute of Aquaculture welfare-indicator toolboxes.

MEOK PondSense — open-hardware kit

Baseboard fork: Whitebox Labs Tentacle T1 MkII (OSHWA-certified UID CH000003, KiCad public, CC-BY-SA-4.0).

• 4× Atlas Scientific EZO carrier (pH, DO, EC, RTD-temp standard; optional NH3, turbidity, ORP, peristaltic doser)
• Compute: RPi5 or ESP32-S3 (two SKUs)
• Enclosure: PA12-CF printed on Qidi Max4, IP67 gasket, CSOAI stamp 10 mm
• Firmware: ships pre-flashed with this MCP and a care-membrane subscriber
• BoM: £180-£280 hobby / £450-£550 assembled pro with 1yr Pro subscription
• Licence: CERN-OHL-S-2.0 hardware, MIT firmware, AGPL-3.0 MCP

Pricing

Tier	Price	What you get
Hobbyist	£29/mo	60 calls/hour. 1 rig. Safe-range check + intent attestation.
Pro	£79/mo	Unlimited. Multi-rig. Dose actuator hook + welfare-alert webhooks.
Enterprise	Custom	Pro + private SOV3 deployment + fleet management.

Subscribe — £29/mo Hobby

License

MIT © MEOK AI Labs

---

Pairs with MEOK Aquaculture Suite

• meok-rspca-aquaculture-mcp (£499/mo) — RSPCA Assured trout + salmon welfare moat.
• meok-uk-fhi-mcp (£79/mo) — CEFAS + APHA + EA permit stack.
• meok-asc-rspca-crosswalk-mcp (£999/mo) — one audit pack for ASC + RSPCA + GlobalG.A.P.
• meok-laia-aquatic-mcp (£29/mo) — England Animal Activities Licensing for ornamental/koi retailers.
• meok-koikeeper-ai-mcp (consumer) — koi-specific companion for koikeeper.ai users.

→ Full catalogue: meok.ai/aquaponics

Get started

• Free — 60 calls/hour, no card. Safe-range checks + intent attestation.
• Hobby £29/mo → Subscribe · Pro £79/mo (multi-rig + care-gated actuation) → Subscribe
• Not ready to subscribe? 30-min review of your sensor/welfare setup — book a call

Verify any signed attestation at https://meok.ai/verify.

Configuration

Add to your claude_desktop_config.json (Claude Desktop) or your MCP client config:

{
  "mcpServers": {
    "meok-aquaponics-monitor-mcp": {
      "command": "uvx",
      "args": ["meok-aquaponics-monitor-mcp"]
    }
  }
}

Or: pip install meok-aquaponics-monitor-mcp then run the meok-aquaponics-monitor-mcp command (stdio transport).

Examples

Once configured, ask your assistant, for example:

• "Use list_supported_hardware to …"
• "Use register_rig to …"
• "Use report_readings to …"