meshconsole 3.4.1

A powerful CLI and web interface for Meshtastic and MeshCore mesh networking devices

A web-based monitoring and control dashboard for Meshtastic and MeshCore mesh networks.

m9wav.uk

---

What's New

v3.4.0 -- Route intelligence: decoded path trails, ML route learning, D3.js mesh topology graph, node search autocomplete

v3.3.0 -- Auth UX, routing noise filter, cleaner UI

v3.2.0 -- Unlimited simultaneous devices, per-device identity

v3.1.0 -- USB auto-detection, flexible optional dependencies

v3.0.0 -- MeshCore backend, dual-device mode, modular architecture

---

Installation

# Just Meshtastic
pip install meshconsole[meshtastic]

# Just MeshCore
pip install meshconsole[meshcore]

# Both backends
pip install meshconsole[all]

# Core only (no backend deps -- for custom setups)
pip install meshconsole

Or install from source:

git clone https://github.com/m9wav/MeshConsole.git
cd MeshConsole
pip install -e ".[all]"

---

So I got really into Meshtastic after picking up a couple of LoRa radios and wanted a way to monitor my mesh network from my computer. The official app is fine but I wanted something I could leave running on a server, log everything to a database, and maybe poke at later.

This started as a quick script and... well, it grew. Now it's got a web UI, MeshCore support, dual-device mode, USB auto-detection, and everything. Figured I'd clean it up and share it.

What it does

• Auto-detects your Meshtastic and MeshCore devices over USB -- just plug in and go
• Connects to Meshtastic over USB or TCP/IP (WiFi)
• Connects to MeshCore over BLE, serial, or TCP
• Runs both backends simultaneously in dual mode
• Logs all packets to a SQLite database (with backend tagging)
• Shows a live web dashboard with all the node activity
• Lets you send messages and run traceroutes from the web UI
• Exports your data to JSON/CSV if you want to analyze it elsewhere
• Auto-reconnects if the connection drops

The web interface shows positions on a map, telemetry data (battery, signal strength, etc), and you can see message history. Pretty handy for debugging mesh issues.

Quick Start

The simplest way -- plug in your device(s) and run:

meshconsole listen --usb --web

MeshConsole will scan your serial ports, figure out what's Meshtastic and what's MeshCore, and connect to everything it finds. Open http://localhost:5055 in your browser.

Explicit connections

# Meshtastic via USB (specific port)
meshconsole listen --usb --port /dev/ttyACM0 --web

# Meshtastic via TCP/IP
meshconsole listen --ip 192.168.1.100 --web

# MeshCore via serial
meshconsole listen --backend meshcore --mc-serial /dev/ttyUSB0 --web

# MeshCore via BLE
meshconsole listen --backend meshcore --mc-ble "AA:BB:CC:DD:EE:FF" --web

# Dual mode (explicit)
meshconsole listen --backend dual --usb --mc-serial /dev/ttyUSB0 --web

# Multiple devices (any combination)
meshconsole listen --device meshtastic:usb:/dev/ttyACM0 --device meshtastic:tcp:192.168.1.100 --device meshcore:usb:/dev/ttyUSB0 --web

Other Commands

# Listen without web interface (CLI output only)
meshconsole listen --usb --verbose

# List nodes your device knows about
meshconsole nodes --usb

# Send a message
meshconsole send --usb --dest !12345678 --message "hey there"

# Traceroute to a node
meshconsole traceroute --usb --dest !12345678

Configuration

For more control, create a config.ini:

cp config.example.ini config.ini

Meshtastic only

[Device]
connection_type = usb
serial_port = /dev/ttyACM0

MeshCore only

[Backend]
mode = meshcore

[MeshCore]
connection_type = usb
serial_port = /dev/ttyUSB0

Dual mode

[Backend]
mode = dual

[Device]
connection_type = usb
serial_port = /dev/ttyACM0

[MeshCore]
connection_type = usb
serial_port = /dev/ttyUSB0

Auto-detect (default for USB)

[Device]
connection_type = usb

No [Backend] section needed -- MeshConsole will scan and detect automatically when using USB without explicit ports.

Multiple devices (new in v3.2.0)

[Devices]
count = 3

[Device.0]
type = meshtastic
connection_type = usb
serial_port = /dev/ttyACM0

[Device.1]
type = meshtastic
connection_type = tcp
ip = 192.168.1.100

[Device.2]
type = meshcore
connection_type = usb
serial_port = /dev/ttyUSB0

CLI arguments (--backend, --mc-serial, --device, etc.) always override config file values.

The web dashboard

When you run with --web, you get a dashboard at port 5055. It shows:

• Live packet feed (updates automatically)
• Node list with signal info
• Map with positions (if nodes are reporting GPS)
• Stats about your network
• Backend badges on each packet (Meshtastic or MeshCore)
• Backend filter dropdown to view traffic from one backend at a time
• Per-backend connection status in the header

There's a password for sending messages/traceroutes so you can leave the dashboard open without worrying about someone messing with your network. Set it in config.ini under [Security]. Leave auth_password blank if you don't care.

Production Deployment

For running MeshConsole as a persistent service behind a reverse proxy (nginx, caddy, etc.):

pip install meshconsole[all] gunicorn

Create a wsgi.py entry point, then run with gunicorn:

gunicorn --workers 1 --threads 1 --bind 127.0.0.1:5055 --timeout 120 wsgi:application

A systemd service file:

[Unit]
Description=MeshConsole Web Interface
After=network.target

[Service]
Type=simple
User=meshconsole
WorkingDirectory=/opt/meshconsole
Environment="PATH=/opt/meshconsole/venv/bin:/usr/bin"
ExecStart=/opt/meshconsole/venv/bin/gunicorn --workers 1 --threads 1 --bind 127.0.0.1:5055 --timeout 120 wsgi:application
Restart=always
RestartSec=5

[Install]
WantedBy=multi-user.target

Important: Use --workers 1 since each worker maintains its own device connection.

Files

After running for a while you'll have:

• meshtastic_messages.db - SQLite database with all your packets
• meshtastic_tool.log - Logs (rotates automatically)

The database is useful if you want to do your own analysis. The packets table has everything including the full raw packet data as JSON, with a backend column indicating which backend each packet came from.

Exporting data

meshconsole export --format json
meshconsole export --format csv

Or use the Export button in the web dashboard's Settings tab.

Troubleshooting

Can't connect via USB:

• Make sure you have the right drivers (CP2102/CH340/etc)
• Check ls /dev/cu.usb* (Mac) or ls /dev/ttyUSB* (Linux) to see if the device shows up
• Try specifying the port explicitly with --port

Can't connect via TCP:

• Make sure WiFi is enabled on your Meshtastic device
• Check you can ping the IP
• The device uses port 4403 by default

Can't connect to MeshCore:

• Make sure meshcore is installed: pip install meshconsole[meshcore]
• For BLE, ensure Bluetooth is enabled and the device is in range
• For serial, check that the correct port is specified with --mc-serial
• The device must be running MeshCore companion firmware

"meshtastic package required" error:

• Install the meshtastic extra: pip install meshconsole[meshtastic]

Auto-detect not finding devices:

• Check that devices show up in ls /dev/ttyUSB* /dev/ttyACM*
• Install the backend libraries: pip install meshconsole[all]
• Try specifying ports explicitly to narrow down the issue

Web interface not loading:

• Check if port 5055 is already in use
• Try a different port in config.ini under [Web]

Dependencies

Core: flask, flask-cors, pypubsub, pyserial, requests

Optional backends:

• meshconsole[meshtastic]: meshtastic, protobuf
• meshconsole[meshcore]: meshcore

License

MIT. Do whatever you want with it.

---

Built by M9WAV. If you find bugs or have ideas, feel free to open an issue.