meshpi 0.1.9

Zero-touch Raspberry Pi mesh configuration tool

---

title: "MeshPi — Zero-Touch Raspberry Pi Fleet Management" date: 2025-02-24 categories: [open-source, iot, raspberry-pi, python] tags: [meshpi, rpi, automation, llm, gpio, hardware-profiles, fleet-management] status: active version: "0.2.0" repo: https://github.com/pyfunc/meshpi license: Apache-2.0

MeshPi — Zero-Touch Raspberry Pi Fleet Management

Status: Active development · v0.2.0 · Apache 2.0

---

What is MeshPi?

MeshPi is an open-source Python package that eliminates the manual work of configuring Raspberry Pi devices from factory defaults. Whether you are deploying one device or an entire fleet, MeshPi handles WiFi credentials, SSH keys, user accounts, locale settings, hardware peripherals, and ongoing management — all through a single CLI and an encrypted, zero-trust network protocol.

The project is built for embedded systems developers, IoT integrators, and hardware prototyping labs who regularly provision Raspberry Pi hardware and need a repeatable, secure, and automated workflow.

---

The Problem It Solves

Every fresh Raspberry Pi image requires the same manual steps: connecting a monitor, typing a WiFi password, setting up SSH, configuring locale and timezone, enabling interfaces like I2C and SPI, and installing drivers for attached hardware. Multiply this by dozens of devices and it becomes a significant time sink with high error rates.

MeshPi replaces this process with two commands:

# On the HOST machine (PC or dedicated RPi)
meshpi config    # one-time wizard
meshpi host      # start the service

# On each new CLIENT Raspberry Pi
pip install meshpi && meshpi scan   # discovers host, configures itself, reboots

---

Architecture

MeshPi uses a host–client model with end-to-end RSA+AES-GCM encryption. No credentials ever travel in plaintext.

HOST (PC / RPi)                     CLIENT (fresh RPi)
─────────────────                   ──────────────────────────
meshpi config                       meshpi scan
  → ~/.meshpi/config.env              → mDNS discovery
meshpi host                           → sends RSA public key
  → FastAPI + mDNS               ←  host encrypts config
  → WebSocket /ws/{id}           →  client decrypts & applies
  → Dashboard /dashboard              → WiFi, SSH, user, locale
                                      → reboots
                              ↕
                         meshpi daemon
                           → persistent WebSocket
                           → diagnostics push (60s)
                           → executes remote commands

The host also exposes a real-time web dashboard at /dashboard and a full REST API with Swagger UI at /docs.

---

Key Features in v0.2.0

Encrypted zero-touch provisioning

Configuration is encrypted with AES-256-GCM. The session key is wrapped with the client's RSA-2048 public key. No shared secrets. No cleartext on the wire.

Real-time fleet management

Once a device runs meshpi daemon, the host can push configuration changes, execute shell commands, apply hardware profiles, and trigger reboots — all through the WebSocket channel. The REST endpoint POST /devices/{id}/push_config delivers updates instantly without re-provisioning.

49 hardware profiles across 8 categories

MeshPi ships with ready-to-apply profiles covering a wide range of peripherals:

Category	Examples
display	OLED SSD1306 I2C, TFT ILI9341 SPI, e-Paper Waveshare, HDMI 1080p/4K, DSI Touchscreen
gpio	A4988/ARM69AK steppers, relay boards, PCA9685 servo controller, HC-SR04 distance sensor
sensor	BME280 (temp/humidity/pressure), DS18B20 (1-Wire), MPU-6050 (IMU), INA219 (power monitor)
camera	RPi Camera v2 & HQ, USB UVC, IR night vision
audio	HiFiBerry DAC+, I2S MEMS microphone
networking	CAN MCP2515, RS-485/Modbus, LoRa SX127x, nRF24L01
hat	Sense HAT, PiSugar UPS, RTC DS3231, PoE+
storage	USB boot, NFS, Samba

Each profile installs apt packages, loads kernel modules, patches /boot/config.txt, and runs post-install commands — all in one step:

meshpi hw apply oled_ssd1306_i2c sensor_bme280 gpio_stepper_arm69ak

LLM-powered NLP management agent

The optional meshpi[llm] extra installs LiteLLM, enabling a conversational agent that understands natural language fleet management commands:

You: co jest nie tak z rpi-kuchnia?
Agent: [fetches diagnostics] CPU temperature is 84°C — above safe threshold.
       The throttled flag is set. Recommend improving airflow or adding a heatsink.
       Services: wpa_supplicant is inactive — WiFi may have dropped.
       Suggest: restart wpa_supplicant and check SSID config.

You: zrestartuj usługę WiFi na rpi-kuchnia
Agent: [pushes command] ✓ systemctl restart wpa_supplicant sent to rpi-kuchnia

Works with any LiteLLM-compatible provider: OpenAI, Anthropic, Ollama (local), Azure, Groq, and more.

USB pendrive offline workflow

For air-gapped environments or devices without network access at first boot:

# On CLIENT — seed USB with public key
meshpi pendrive seed

# On HOST — encrypt config onto USB  
meshpi pendrive export

# On CLIENT — apply and reboot
meshpi pendrive apply

Full device diagnostics

meshpi diag collects CPU load, memory, temperature, GPIO pin states, I2C device scan, SPI status, USB devices, WiFi signal, running services, failed systemd units, recent error logs, top processes, and power/voltage status. All metrics are also pushed to the host automatically by the daemon.

Systemd integration

Both the host service and client daemon can be installed as systemd services with a single flag:

meshpi host --install        # installs meshpi-host.service
meshpi daemon --install      # installs meshpi-daemon.service

---

Installation

pip install meshpi                    # core
pip install "meshpi[llm]"             # + LiteLLM NLP agent

Python 3.9+ required. Works on any Linux system (host) and Raspberry Pi OS (client).

---

Project Structure

meshpi/
├── meshpi/
│   ├── cli.py          # Click CLI (config/host/scan/daemon/hw/agent/pendrive/info)
│   ├── config.py       # Interactive wizard → config.env
│   ├── crypto.py       # RSA-2048 + AES-256-GCM
│   ├── host.py         # FastAPI + WebSocket + mDNS + dashboard
│   ├── client.py       # mDNS scanner + WS daemon + config applier
│   ├── applier.py      # System configurator (user/WiFi/SSH/locale)
│   ├── diagnostics.py  # Full RPi system diagnostics collector
│   ├── registry.py     # Persistent device registry (JSON)
│   ├── llm_agent.py    # LiteLLM function-calling agent
│   ├── systemd.py      # Systemd service installer
│   ├── pendrive.py     # USB offline workflow
│   └── hardware/
│       ├── profiles.py # 49 hardware profiles
│       └── applier.py  # Profile applicator (apt/modprobe/config.txt)
├── tests/
│   └── test_meshpi.py  # 59 tests (pytest) — 100% passing
├── pyproject.toml
├── LICENSE             # Apache 2.0
└── README.md

---

Test Coverage

The v0.2.0 release ships with 59 automated tests covering:

• Cryptographic primitives (RSA keygen, encrypt/decrypt roundtrip, cross-key isolation)
• Config file parsing and .env writing
• Device registry CRUD operations
• All 49 hardware profile definitions and filters
• System diagnostics collection
• All REST API endpoints (TestClient, no real network needed)
• CLI commands and option handling

pytest tests/ -v   # 59 passed in ~8s

---

Docker Support

MeshPi includes Docker support for testing and deployment:

# Build the image
docker build -t meshpi .

# Run host service
docker run -p 7422:7422 meshpi meshpi host --bind 0.0.0.0

# Or use docker-compose for full test environment
docker-compose up -d meshpi-host
docker-compose up meshpi-client  # runs scan in dry-run mode

---

Roadmap

The following features are planned for upcoming releases:

• v0.3 — Web dashboard configuration editor (edit config.env from browser), device grouping and bulk commands
• v0.4 — Prometheus/Grafana metrics export, webhook notifications on device events
• v0.5 — OTA update management (apt upgrade via host), config versioning with rollback
• v1.0 — Stable REST API, PyPI publish, Docker host image

---

Links

• Repository: github.com/pyfunc/meshpi
• License: Apache 2.0
• Author: Softreck — embedded systems, IoT automation, hardware prototyping
• Related projects: Portigen.com (portable power stations), Prototypowanie.pl (PCB prototyping)

License

Apache License 2.0 - see LICENSE for details.

Author

Created by Tom Sapletta - [e-mail]