mflux-taef
Adds two commands to mflux: mflux-generate-z-image-turbo-taef and
mflux-generate-z-image-taef. Each takes every option of the mflux command it mirrors
(mflux-generate-z-image-turbo and mflux-generate-z-image), runs mflux's own loading and generation steps, and
writes a live preview image while the picture is being denoised. Open the file in Preview or Quick Look, and press
Ctrl-C when the composition is wrong instead of waiting for the last step.
The preview is the image as it stands after the current step, decoded by a tiny decoder from mlx-taef. It is not the final image, which mflux still decodes with the model's own VAE and saves the usual way.
mflux-taef lives in the taef/ folder of mflux-plugins, the plugin
repository of the mflux-community organization. Denis Ineshin maintains it. The tiny decoder is in mlx-taef, a separate
Python library by the same author; this package connects it to mflux's command line.
Versions lists what it installs with.
Install
The recommended setup puts mflux and this package in one tool environment:
uv tool install mflux --with-executables-from mflux-taef
You get mflux's commands and the two TAEF commands side by side. In a virtual environment that already has mflux:
pip install mflux-taef
Installing the package brings in mlx-taef. The first run downloads the decoder and converts it for MLX; later runs reuse it.
Usage
Use the Turbo command for Turbo; the base command runs both.
mflux-generate-z-image-turbo-taef --prompt "a lighthouse on a cliff at dusk" --steps 8 --seed 42
Every mflux-generate-z-image-turbo option works the same way. For Z-Image base:
mflux-generate-z-image-taef --prompt "a lighthouse on a cliff at dusk" --steps 50 --guidance 4.0 --seed 42
Before each image the command prints where its preview goes, for example
TAEF preview: image.preview.png, every step (zimage decoder).
Three options control the preview:
| Option | Default | What it does |
|---|---|---|
--taef-preview PATH |
<output name>.preview.png, next to the output image |
Where the preview goes: a .png, .jpg, .jpeg or .webp file (any letter case). PATH may contain {seed}. |
--taef-every N |
every step | Update the preview every N steps; N is 1 or more. |
--taef-frames |
off | Keep every step as its own file, <preview name>_stepNN.<suffix>. |
--taef-frames writes every step, so it can't be combined with --taef-every. NN counts the steps this run
executed, so an image-to-image run, which starts partway through the schedule, numbers from its own first step.
Where the files go
By default the preview sits next to the final image: for --output out.png it is out.preview.png. With several
seeds, mflux adds _seed_<n> to the output name, so the previews get it too.
An explicit --taef-preview PATH is one live file, and each seed overwrites it in turn, so reopen the file to see the
latest preview. Put {seed} in PATH to get one file per seed instead. With --taef-frames and several seeds,
_seed_<n> is added to the end of the name, so each seed keeps its own ..._seed_<n>_stepNN... files. The line the
command prints before each seed shows the real path for that seed.
Previews and --stepwise-image-output-dir
mflux's --stepwise-image-output-dir decodes every step with the model's full VAE and keeps every step plus a
composite image. A preview goes through the tiny decoder into one file. mlx-taef's
comparison page has the published decode speed and the
similarity to the full VAE for Z-Image; this package adds no timing figure of its own.
The two options can run in the same command: mflux writes its step images to its directory and this package writes the preview file or frames to the preview path.
Checked on real weights
On 2026-11-09 the TAEF commands below ran on real weights, and the single-seed 512×512 ones were compared with the
plain mflux command with the same options. The machine was an Apple M1 Max with 32 GB, macOS 27.2, Python 3.13,
mflux 0.24.0 and mlx-taef 0.9.0. The prompt was "a red apple on a wooden table" and the seed 42. The models were
mflux-community/z-image-turbo-mflux-q4 and mflux-community/z-image-base-mflux-q4. The first two lines are the plain
commands the TAEF images were compared with; the rest are the TAEF commands:
mflux-generate-z-image-turbo --model mflux-community/z-image-turbo-mflux-q4 --prompt "a red apple on a wooden table" --steps 8 --seed 42 --width 512 --height 512 --output image.png
mflux-generate-z-image --model mflux-community/z-image-base-mflux-q4 --base-model z-image --prompt "a red apple on a wooden table" --steps 20 --guidance 4.0 --low-ram --seed 42 --width 512 --height 512 --output image.png
mflux-generate-z-image-turbo-taef --model mflux-community/z-image-turbo-mflux-q4 --prompt "a red apple on a wooden table" --steps 8 --seed 42 --width 512 --height 512 --output image.png
mflux-generate-z-image-turbo-taef --model mflux-community/z-image-turbo-mflux-q4 --prompt "a red apple on a wooden table" --steps 8 --seed 42 --width 512 --height 512 --output image.png --taef-frames
mflux-generate-z-image-turbo-taef --model mflux-community/z-image-turbo-mflux-q4 --prompt "a red apple on a wooden table" --steps 8 --seed 42 43 --width 512 --height 512 --output image.png
mflux-generate-z-image-taef --model mflux-community/z-image-base-mflux-q4 --base-model z-image --prompt "a red apple on a wooden table" --steps 20 --guidance 4.0 --low-ram --seed 42 --width 512 --height 512 --output image.png --taef-every 5
mflux-generate-z-image-taef --model mflux-community/z-image-base-mflux-q4 --base-model z-image --prompt "a red apple on a wooden table" --steps 8 --guidance 4.0 --seed 42 --width 1024 --height 1024 --output image.png
- Turbo, 512×512: the TAEF image was pixel-identical to the plain one, and a 512×512 preview was written. With
--taef-framesthe image was identical again, and 8 per-step preview files were written instead of the single preview. - Turbo with
--seed 42 43: the seed-42 image was identical to the single-seed plain image, and each seed got its own preview. - Base, 512×512, with
--low-ramand--taef-every 5: the image was identical to the plain one, and a preview was written. - Base, 1024×1024: the TAEF command finished and wrote the image and a 1024×1024 preview. There was no plain run of that recipe, so there is no comparison.
- Ctrl-C after step 3 of 8 (the Turbo 512×512 TAEF command): mflux printed "Stopping image generation at step", the exit code was 0, no image was written, and the preview stayed on disk.
In the single-image 512×512 Turbo runs above, the TAEF command used more memory than the plain one; that is one comparison on one machine. The TAEF Turbo command was also started at 1024×1024 and did not finish in this test, so nothing here covers Turbo at that size.
What the command checks
The command checks your request before it loads any weights. When it can't run, it stops with exit code 2 and a message that says why. These refusals also tell you to run the plain mflux command to generate without previews:
--taef-everybelow 1;- a preview file that doesn't end in
.png,.jpg,.jpegor.webp; - a
--taef-previewwith a{...}field other than{seed}, or a{seed}field with more than a width.{seed}takes a width of one to three digits (padded with spaces, or with zeros when it starts with 0), optionally followed byd, so{seed:04d}and{seed:3}run. A conversion such as{seed!r}, a bare{seed:d}, any other spec and a width of more than three digits ({seed:0004}included) are refused.
These refusals only explain the problem:
--taef-everytogether with--taef-frames;- a
--taef-previewpath that is an existing directory or a symbolic link. The check runs before anything loads. With--taef-framesthe same goes for an existing directory or symbolic link at any<preview name>_stepNN.<suffix>frame name in the preview's folder; - a preview file name over 255 bytes, which is the most a file name can have. A
{seed:999}width can reach that. With--taef-framesthe longest frame name is measured. Without this check the model would load and the first save would fail, which turns the preview off; - a preview path that names the same file as
--output, or, with several seeds, as any seed's output (for example--seed 2 12 --output a.png --taef-preview 'a_seed_1{seed}.png'). The match ignores letter case, because a default macOS volume does. With--taef-framesthe preview path itself is never written, so--outputis compared with the<preview name>_stepNN.<suffix>frame names instead. Without this check the last preview would take the name, and mflux would save the final image under another one; - a
--modelthat is not one of mflux's names, not a local path that exists and not a Hugging Face repo id (org/model). On an mflux whose model-path rules differ from the checked release, the name is left to mflux. A missing path restored with-Cnames the file it came from; - anything mflux's own option checks refuse, with mflux's own message.
Exit codes:
- 0: the run finished, you pressed Ctrl-C during generation (the last preview stays on disk), or the prompt file couldn't be read.
- 1: the decoder couldn't be prepared (checked before the model loads; it prints
could not prepare the TAEF preview decoder), or the run failed after the model loaded (the traceback is printed). - 2: the request was refused before any weights loaded.
If a preview fails during a run (a decode error, a folder you can't write to), the command prints one warning on
stderr, stops previews for that seed and finishes the image. The plugin writes nothing into the image's metadata or the
--make-conf sidecar, so the final image's metadata is what the plain command writes.
What it doesn't do
- No fast final decode. The tiny decoder is for previews; the saved image still uses the model's VAE. mflux's own
--low-ramstays the option for decode memory. mflux decodes in row strips by default, and--vae-full-precisionswitches that off. - No composite image, GIF or video, no terminal or window display, and no record in the image's metadata.
- No prediction previews for Z-Image: mflux doesn't pass the model's prediction to Z-Image callbacks, so the preview decodes the latent.
- No FLUX.1, FLUX.2, Qwen-Image or other model families yet (Qwen-Image 2.1 included).
- No command that combines TAEF with TeaCache (see the next section).
With mflux-teacache
The two plugins install into one environment, because each adds only its own part of the mflux.extras namespace:
pip install mflux-taef mflux-teacache
They don't combine on the command line: mflux-generate-z-image-teacache has no --taef-preview, and the TAEF
commands don't skip steps. The libraries do work together from Python. TeaCache supports Z-Image base, not Turbo:
from pathlib import Path
from mflux.models.common.config.model_config import ModelConfig
from mflux.models.z_image.variants.z_image import ZImage
from mlx_taef.integrations.mflux import LivePreviewCallback
from mlx_teacache import apply_teacache
model = ZImage(model_config=ModelConfig.z_image(), quantize=8)
handle = apply_teacache(model)
preview = LivePreviewCallback(flux=model, every=1, save_to=Path("preview.png"))
model.callbacks.register(preview)
image = model.generate_image(
seed=42, prompt="a lighthouse on a cliff at dusk", width=512, height=512, guidance=4.0, num_inference_steps=50
)
image.save("out.png")
Versions
- Python 3.11 or newer, on Apple Silicon.
- mflux 0.24 or newer, with no upper limit.
- mlx-taef 0.9.0 or newer.
What changed in each release is in CHANGELOG.md.
Development
From the taef/ folder of an mflux-plugins checkout:
uv sync --locked
uv run pytest
uv run ruff check . && uv run ruff format --check .
uv run ty check src
The tests use stand-ins for the model and a random decoder, and never download weights. AGENTS.md describes the
package layout and its rules.
License
Apache-2.0. NOTICE lists the code this package copies from mflux, which is MIT-licensed.
Metadata
Release files for mflux-taef 0.1.0
For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.
Source distribution (sdist)
| File | Size | Uploaded | Provenance | Actions |
|---|---|---|---|---|
| mflux_taef-0.1.0.tar.gz | 18.8 kB | With provenance | Details for mflux_taef-0.1.0.tar.gz |
Built distribution (wheel)
| File | Interpreter | ABI | Platform | Actions Reset |
|---|---|---|---|---|
| mflux_taef-0.1.0-py3-none-any.whl | Python 3 | none | any | Details for mflux_taef-0.1.0-py3-none-any.whl |
Total release size: 40.0 kB
Release files / mflux_taef-0.1.0.tar.gz
| Download URL | mflux_taef-0.1.0.tar.gz |
|---|---|
| Size | 18.8 kB |
| Tags | Source |
|
SHA-256 checksum How to use checksums |
12099fe1b632c1d7b5874bb9c20bcd5f3685d2393c69b3fff37cfc708f3ffd05
|
|
BLAKE2b-256 checksum How to use checksums |
01546d1f9720214c3fed868ed36185d7f0c9cd58e98142c8eaa5588fa5152249
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.14
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Nov 9, 2026.
Transparency logRelease files / mflux_taef-0.1.0-py3-none-any.whl
| Download URL | mflux_taef-0.1.0-py3-none-any.whl |
|---|---|
| Size | 21.1 kB |
| Tags | Python 3 |
|
SHA-256 checksum How to use checksums |
c56db4565b4d0dffb55161ea1da01f4eb6ac6b5f7cafedf7fd7893c060951757
|
|
BLAKE2b-256 checksum How to use checksums |
b240f0396b4dc5399ab09421f0747b8a1622dc36ad260b877cc5382b5d8de889
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.14
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Nov 9, 2026.
Transparency logSecurity for mflux-taef 0.1.0
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
Full provenance
Both files in this release have been uploaded with provenance metadata.
Attestation for mflux_taef-0.1.0.tar.gz
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Nov 9, 2026.
Transparency logA note on package security
PyPI is a repository for distributing packages, not a service for auditing them. While third-party security researchers and our staff do their best to detect and remove malicious packages, PyPI cannot guarantee the quality, security or suitability of any given package.
To learn more about protecting yourself from malicious actors, visit our package security documentation.