Microcycler Python SDK

Python SDK for the Microcycler battery testing platform.

Status: Pre-alpha — API subject to change.

Installation

pip install microcycler

Quickstart

Connect and read telemetry

import asyncio
from microcycler import Cycler

async def main():
    async with Cycler("192.168.1.100") as cycler:
        print(await cycler.identify())
        t = await cycler.get_telemetry()
        print(f"State:    {t.state}")
        print(f"Voltage:  {t.voltage:.3f} V")
        print(f"Current:  {t.current:.3f} A")
        print(f"Temp:     {t.temperature:.1f} °C")
        print(f"Capacity: {t.capacity_mah:.1f} mAh")

asyncio.run(main())

Discover cyclers on the network

import asyncio
from microcycler import Cycler, discover

async def main():
    # Listens for the discovery beacon on UDP 5002. The beacon is periodic
    # and unsolicited, so this is a collection window, not a deadline —
    # allow at least one beacon period (10 s by default).
    for dev in await discover():
        print(dev)                      # HADES-042 @ 169.254.10.5:5000 (standby)
        async with Cycler(dev.host, port=dev.port) as cycler:
            print(await cycler.get_life())

asyncio.run(main())

Stream live telemetry via UDP

from microcycler.streaming import CyclerStream

async def monitor():
    async with CyclerStream() as stream:
        async for telemetry in stream:
            print(telemetry.voltage, telemetry.current)

Build and run a recipe

from microcycler import Cycler
from microcycler.recipes import Recipe, CC, CV, Rest, Loop

recipe = (
    Recipe(name="Standard Formation")
    .add(CC(current=0.1, cutoff_voltage_high=4.2))
    .add(CV(voltage=4.2, limit_current_high=0.1, cutoff_current_low=0.02))
    .add(Rest(duration=1800))
    .add(CC(current=-0.2, cutoff_voltage_low=2.8))
    .add(Rest(duration=1800))
    .add(Loop(cycles=3))
)

async def run():
    async with Cycler("192.168.1.100") as cycler:
        await cycler.load_recipe(recipe)
        await cycler.start()

Recipe steps

Step	Description
`CC(current, cutoff_voltage_high, cutoff_voltage_low, cutoff_time, cutoff_capacity)`	Constant current. `current` is signed: positive = charge, negative = discharge.
`CV(voltage, limit_current_high, cutoff_current_low, cutoff_time)`	Constant voltage
`CP(power, cutoff_voltage, cutoff_time)`	Constant power
`CR(resistance, cutoff_voltage, cutoff_time)`	Constant resistance
`Rest(duration)`	Open-circuit rest
`EIS(freq_start, freq_end, amplitude, points_per_decade)`	Impedance sweep
`Loop(cycles)`	Repeat preceding steps N times
`ACRipple(duration, dc_current, ac_amplitude, ac_freq, cutoff_temp)`	AC ripple excitation for calorimetry / thermal characterisation

License

MIT

Lifetime wear counters

Every board keeps an odometer in its EEPROM. Three independent axes, because a unit can be worn out along any one of them while the others look fine: mechanical (relay actuations), calendar (powered time) and electrical (charge through the output).

from microcycler import Cycler

async with Cycler("192.168.1.200") as cycler:
    life = await cycler.get_life()

    print(f"boots            {life.boot_count}")
    print(f"powered          {life.powered_hours:,.0f} h")
    print(f"throughput       {life.throughput_ah:,.1f} Ah")
    print(f"MAIN relay       {life.relay_main:,} closings")
    print(f"FAN relay        {life.relay_fan:,} closings")

    if not life.durable:
        print("WARNING: counters are not reaching the EEPROM")

These belong to the physical board, not to your database, so they survive a reinstall, an MCU swap, or the unit moving to another lab. There is deliberately no way to reset them — an odometer that can be wound back is not evidence of anything.

life.durable (i.e. write_errors == 0) is the field worth alerting on. A unit with a dead EEPROM still counts perfectly well in RAM and reports entirely plausible numbers; nothing else distinguishes a kept odometer from one that is lost at every power cut.

Counters are flushed at most once every few minutes to spare the part, so up to that much accrued wear is in RAM only. Before deliberately powering a unit down:

await cycler.flush_life()

Metadata

Release files for microcycler 0.1.10

For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.

Source distribution (sdist)

Source distribution for microcycler 0.1.10
File	Size	Uploaded	Provenance
microcycler-0.1.10.tar.gz	148.0 kB	Oct 10, 2026	Without provenance	Details

Built distribution (wheel)

Table of built distributions (wheels) for microcycler 0.1.10
File	Interpreter	ABI	Platform	Reset
microcycler-0.1.10-py3-none-any.whl 70.3 kB Oct 10, 2026 Without provenance	Python 3	none	any	Details

Total release size: 218.3 kB

Release files / microcycler-0.1.10.tar.gz

Download URL	microcycler-0.1.10.tar.gz
Size	148.0 kB
Tags	Source
SHA-256 checksum How to use checksums	`8131e937969113b98638481bc04f6774d6151e41a907270658aea84ebc787a61`
BLAKE2b-256 checksum How to use checksums	`7a14a0b1e4ceb5c60f287fbebe5ec88eaa64b4023bf3c3aba5f9f88591866cc4`
Upload date	Oct 10, 2026
Uploaded using Trusted Publishing? What is trusted publishing?	No
Uploaded via	`twine/7.0.0 CPython/3.12.15`

Release files / microcycler-0.1.10-py3-none-any.whl

Download URL	microcycler-0.1.10-py3-none-any.whl
Size	70.3 kB
Tags	Python 3
SHA-256 checksum How to use checksums	`6624e8a9ca75d24516535f92925a14d8936ff7390d1fb5e84f90d3eca7246329`
BLAKE2b-256 checksum How to use checksums	`a4ad9351e2b399c64f378602eb430a354a59c5bb2916b7b6f0dbd1bd2893c6ba`
Upload date	Oct 10, 2026
Uploaded using Trusted Publishing? What is trusted publishing?	No
Uploaded via	`twine/7.0.0 CPython/3.12.15`

Security for microcycler 0.1.10

Report project as malware

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

No provenance found

None of the files in this release were uploaded with provenance metadata.

A note on package security

PyPI is a repository for distributing packages, not a service for auditing them. While third-party security researchers and our staff do their best to detect and remove malicious packages, PyPI cannot guarantee the quality, security or suitability of any given package.

To learn more about protecting yourself from malicious actors, visit our package security documentation.