Skip to main content

mihenk

A touchstone for discovered equations. Before you interpret the law that PySINDy found in your data, mihenk checks whether it could be an artifact: of noise amplified by numerical differentiation, of the particular states your data happened to visit, of a library that was too small, or of analysis choices.

Mihenk (Turkish mihenk taşı, Azerbaijani mehək daşı, Persian mahak محک) is the touchstone used to test whether gold is real.

Install · Testing · Roadmap · Publishing · Changelog

pip install "mihenk[pysindy]"

The core needs only numpy, scipy and sympy, runs on a CPU, and works offline. It needs no account, API or GPU.

Why

A SINDy fit always returns an equation. Whether that equation is the law of your system is a separate question, and the fit's R² does not answer it. Here is SINDy on clean data from the Hopf normal form, observed on its limit cycle:

true law:        x' = x - y - x^3 - x*y^2
SINDy returns:   x' = -0.6667 y - 0.3333 x^2*y - 0.3333 y^3      (derivative R² = 1.000)

On the circle x² + y² = 1, both equations (and x' = -y) fit perfectly. mihenk finds this from the data and the equation alone:

ERROR     EQUIFINALITY  [tier 0: data + equation]
          where: x'
          A sparser equation fits your data exactly as well (1 term instead of 3): x' = -y. On the
          observed states some candidate terms are combinations of others, so the data cannot choose
          between these laws.
          fix: Collect data that leaves the current set of states (other initial conditions,
          transients, perturbations) so the alternatives make different predictions.

Following the fix works: with transients from six starting points, SINDy recovers the true law and mihenk reports no findings.

Quick start

import pysindy as ps
import mihenk
from mihenk import synth

# example data with a known law; use your own x (T, n) and t (T,) instead
b = synth.simulate("lorenz", noise=0.05, seed=0)
x, t = b.xs[0], b.ts[0]

model = ps.SINDy(optimizer=ps.STLSQ(threshold=0.1))
model.fit(x, t=t, feature_names=["x", "y", "z"])

report = mihenk.scan_pysindy(model, x, t)
print(report.render_text())
report.save("mihenk_report")       # then open mihenk_report/report.html

From the command line:

mihenk synth lorenz --noise 0.05 -o lorenz.npz          # or bring your own .npz / .csv
mihenk fit lorenz.npz -o model.json --threshold 0.1      # PySINDy, polynomial library
mihenk scan lorenz.npz --model model.json --out report   # exit status 1 on errors

--model also takes a plain text file, including PySINDy's own model.print() output:

(x)' = -9.999 x + 9.999 y
(y)' = 27.992 x + -0.999 y + -1.000 x z
(z)' = -2.666 z + 1.000 x y

What mihenk checks

Finding Tier The failure it names How it is tested
EQUIFINALITY 0 Another law fits the data exactly as well Relations among candidate terms on the observed states (SVD); sparsest equally good subset; one-term swaps
DERIVATIVE_ARTIFACT 0 A term or coefficient produced by differentiated noise Refit the equation's own terms with a derivative-free integral form and compare signs and values
WEAK_TERM 0 The data can't tell the equation with a term from without it F statistic for dropping each term, in the integral form
UNDERFIT 0 A left-out term explains much of what the equation misses Add each library term, and each term one polynomial degree beyond the library
ROLLOUT_TRAP 0 Fits derivatives but does not reproduce the system when simulated Short rollouts from held-out states; full rollouts; escapes; long-run spread and mean
KINEMATIC_MISMATCH 0 A declared pair such as θ' = ω does not hold in the data or in the equation (a lagging, scaled or biased sensor) Derivative-free fit of p' = gain * v(t + lag) + offset; checks the discovered p' against v; tests whether the lag predicts the extra terms; refits the other equations with v corrected
UNSTABLE_STRUCTURE 1 Terms come and go when the data are resampled Bootstrap (trajectories, or blocks of one trajectory), refit through PySINDy
FORKING_PATHS 1 The law depends on defensible analysis choices Refit under other derivative methods and sparsity thresholds
MISSED_TERM, SPURIOUS_TERM, COEF_ERROR 2 (synthetic data only) The discovered law against the true one Term-by-term comparison

Declaring kinematic pairs

Some variables are derivatives of others by definition: position and velocity, angle and angular velocity. mihenk cannot infer that from data, so you declare it:

report = mihenk.scan_pysindy(model, x, t, kinematics={"theta": "omega"})   # theta' = omega

On the command line, use mihenk scan ... --kinematic theta=omega, or put "kinematics" in the bundle's meta. Without a declaration the check is not assessed, and mihenk suggests pairs whose discovered equations look kinematic. On the experimental pendulum it reports that the velocity signal runs 0.85 ms late, and that the lag accounts for 98% of the extra terms SINDy put into θ'.

Tiers describe what evidence a check needs:

  • Tier 0: only your data and the equation. mihenk never calls the discovery tool; it refits only the coefficients of term sets the equation already has.
  • Tier 1: a refit callable, which you get automatically with a PySINDy model.
  • Tier 2: ground truth, which only synthetic data has.

Every report lists which checks ran, which were clean, and which were not assessed and why. A check that did not run is not a clean result.

Every threshold is named and can be overridden: mihenk scan ... --set weak_term_f=5, or mihenk.scan(..., thresholds=mihenk.Thresholds(weak_term_f=5)).

Validation

mihenk validate runs 18 synthetic cases built to show each failure, plus cases that must come out clean. mihenk validate --seeds 20 repeats them over 20 random seeds (different initial conditions and noise):

case                               passed  warned (clean)   wrong law, flagged
lorenz_clean                       20/20             0/20                  1/1
lorenz_noise1                      20/20             3/20                  3/3
van_der_pol_clean                  20/20             0/20                    -
duffing_clean                      20/20             0/20                  1/1
linear_clean                       20/20             0/20                    -
lotka_volterra_many                20/20             0/20                    -
stuart_landau_many                 20/20             0/20                    -
stuart_landau_on_cycle             20/20                -                20/20
lotka_volterra_one_orbit           20/20             0/20                    -
lotka_volterra_one_orbit_noisy     20/20                -                  6/6
duffing_small_library              20/20                -                20/20
lorenz_noise5_low_threshold        20/20                -                20/20
van_der_pol_noise10                20/20                -                20/20
pendulum_kinematics_clean          20/20             0/20                20/20
pendulum_velocity_lag              20/20                -                20/20
pendulum_velocity_gain             20/20                -                20/20
pendulum_velocity_offset           20/20                -                20/20
linear_wrong_sign                  20/20                -                    -

360/360 case runs pass over seeds 0-19.

Over these runs:

  • Every one of the 171 times SINDy returned a wrong law, mihenk flagged it. That includes 25 runs in cases meant to be clean. In 20 of those, SINDy added a small θ term next to sin θ in the clean pendulum.
  • In the 9 non-pendulum cases built to come out clean, none of the 175 correct-law runs received an error. 3 received a warning. All three are single mild-noise Lorenz trajectories lying close to a quadric surface, where a constant term appears in some refits.
  • KINEMATIC_MISMATCH never fired on the clean pendulum (20 of 20) and caught the lag, gain and offset every time (60 of 60). Its separate, pre-registered calibration/test split is in experiments/kinematic_synthetic.

Experimental data

mihenk was tested on the Brunton lab's experimental single pendulum, with the predictions committed before any fit (protocol, results). The reference law is omega' = 64.22 sin(theta) - 0.0672 omega. Of seven predictions, 5 held, 1 partly held and 1 failed. In brief:

  • Large swings, informed library. SINDy found sin θ = 63.82, and mihenk left that term alone. It warned about extra terms in θ' (which should be exactly ω). Following that up showed the lab's filtered velocity signal lags the angle by 0.7–1.4 ms. That lag also cancelled most of the damping, which is why SINDy missed it.

  • Small swings. sin θ ≈ π − θ, so mihenk reported EQUIFINALITY errors and a sparser equally good law, as predicted.

  • What mihenk missed:

    • an equation that injects energy;
    • a long rollout that drifts (R² 0.73);
    • that a cubic library lacks sin θ. The first missing term is degree 5, beyond UNDERFIT's one-degree search, and within the observed swings the cubic is a fine law anyway.

    These lead the roadmap.

mihenk 0.2 adds the check this test asked for, KINEMATIC_MISMATCH. Declare θ' = ω and it names the lag directly: 0.85 ms, accounting for 98% of the extra θ' terms. Its own test is a pre-registered synthetic sweep (experiments/kinematic_synthetic):

  • no false alarms in 80 runs;
  • a lag of the experiment's size caught as an error up to 0.5% noise;
  • a 2% gain error and a velocity bias caught in every run.

At 1% position noise it misses half of the lags. That is a stated power limit.

Limits (read these)

What comes next is in ROADMAP.md.

  • Research prototype (alpha). Thresholds are calibrated on mihenk's own toy systems and were not changed after the first experimental test. Treat them as starting points.
  • mihenk rules out named failures. It cannot prove that an equation is the law. No findings means that no tested failure explains the equation.
  • ODE models only, without control inputs. PDEs and weak-form libraries (WeakPDELibrary) are not supported yet.
  • The polynomial library is assumed when you pass a text equation. With a PySINDy model, mihenk uses its real library (polynomial and Fourier libraries are tested).
  • mihenk checks only physics you can see in the data. It does not know that a free pendulum must lose energy unless a check for that exists (see the roadmap).
  • The integral form uses overlapping windows, so F statistics are screening statistics, not exact tests.
  • For chaotic systems a low full-length rollout R² is expected. mihenk compares long-run spread and mean instead.

Provenance

With pip install "mihenk[provenance]", mihenk scan ... --daftar records each scan (inputs, thresholds, environment, findings) with daftar, so daftar diff can show what changed between two scans.

  • Brunton, Proctor & Kutz (2016), PNAS: SINDy.
  • de Silva et al. (2020) and Kaptanoglu et al. (2022), JOSS: PySINDy.
  • Reinbold, Gurevich & Grigoriev (2020/2021): integral (weak) formulations, and ensembles that flag missing or spurious terms.
  • Hauger, Scholl & Kutyniok (2024): robust identifiability for symbolic recovery of differential equations.

License

Apache-2.0. Author: Aslan Satary Dizaji.

Metadata

Release files for mihenk 0.2.0

For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.

Source distribution (sdist)

Source distribution for mihenk 0.2.0
File Size Uploaded Provenance Actions
mihenk-0.2.0.tar.gz 57.5 kB Without provenance Details for mihenk-0.2.0.tar.gz

Built distribution (wheel)

Table of built distributions (wheels) for mihenk 0.2.0
File Interpreter ABI Platform Actions
mihenk-0.2.0-py3-none-any.whl Python 3 none any Details for mihenk-0.2.0-py3-none-any.whl

Total release size: 112.2 kB

Release files / mihenk-0.2.0.tar.gz

Download URL mihenk-0.2.0.tar.gz
Size 57.5 kB
Tags Source
SHA-256 checksum
How to use checksums
77b8749a543c8d019ff9181ef623e2c0d36b49a99f0d7eece2fa61f193ec0f42
BLAKE2b-256 checksum
How to use checksums
c0fb3d95da61651a638ff03c5600a663019ac5511a6b7a06d24656fb833279a1
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
No
Uploaded via twine/7.0.0 CPython/3.11.5

Release files / mihenk-0.2.0-py3-none-any.whl

Download URL mihenk-0.2.0-py3-none-any.whl
Size 54.7 kB
Tags Python 3
SHA-256 checksum
How to use checksums
4dafd77af733ebe3109c126f34e436e6bcc337bcb6840c06dd3b325b8e550bab
BLAKE2b-256 checksum
How to use checksums
bdfb887e1fac849a280688580264acf3b883963a739cd0e88effe81ace1b2e44
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
No
Uploaded via twine/7.0.0 CPython/3.11.5

Security for mihenk 0.2.0

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

No provenance found

None of the files in this release were uploaded with provenance metadata.

A note on package security

PyPI is a repository for distributing packages, not a service for auditing them. While third-party security researchers and our staff do their best to detect and remove malicious packages, PyPI cannot guarantee the quality, security or suitability of any given package.

To learn more about protecting yourself from malicious actors, visit our package security documentation.

Anthropic, PBC Visionary sponsor Bloomberg Visionary sponsor Hudson River Trading Visionary sponsor Meta Visionary sponsor NVIDIA Visionary sponsor Microsoft Sustainability sponsor Depot Continuous Integration AWS Cloud computing and Security Sponsor Datadog Monitoring Fastly CDN Google Download Analytics Sentry Error logging StatusPage Status page