Mokkari
A python wrapper for the Metron Comic Book Database API.
Installation
pip install mokkari
Authentication
Mokkari supports two authentication methods:
import mokkari
# Token authentication (generate a token from your metron.cloud account page)
m = mokkari.api(api_token="your-api-token")
# Username/password (Basic Auth)
m = mokkari.api(username, password)
Example Usage
import mokkari
# Your own config file to keep your credentials secret
from config import username, password
m = mokkari.api(username, password)
# Get all Marvel comics for the week of 2021-06-07
this_week = m.issues_list(
{
"store_date_range_after": "2021-06-07",
"store_date_range_before": "2021-06-13",
"publisher_name": "marvel",
}
)
# Print the results
for i in this_week:
print(f"{i.id} {i.issue_name}")
# Retrieve the detail for an individual issue
asm_68 = m.issue(31660)
# Print the issue Description
print(asm_68.desc)
Rate Limiting
The API allows at least 20 requests per minute (the server may allow more when
load is low), plus a daily limit that starts at 5,000 requests and is raised for
OpenCollective donors (up to 25,000/day).
Because the daily limit varies per user, mokkari doesn't hardcode it — it reads
the X-RateLimit-* headers Metron returns with every response and pre-empts a
request once those headers show a window is exhausted, avoiding an HTTP call
that would fail anyway. When a rate limit is exceeded, a RateLimitError is
raised.
The most recently observed state is available via session.rate_limit_status:
status = m.rate_limit_status
print(f"Sustained remaining: {status.sustained.remaining}/{status.sustained.limit}")
Handling Rate Limits
The RateLimitError includes a retry_after attribute that tells you exactly
how many seconds to wait before making another request:
import mokkari
from mokkari.exceptions import RateLimitError
import time
m = mokkari.api(username, password)
try:
issue = m.issue(31660)
except RateLimitError as e:
# Display user-friendly message
print(f"Rate limited: {e}")
# Programmatically wait for the exact time needed
print(f"Waiting {e.retry_after} seconds...")
time.sleep(e.retry_after)
# Retry the request
issue = m.issue(31660)
Thread Safety
A Session can be shared across threads, but the rate-limit check above is
advisory rather than a hard gate: it only blocks once the last known response
headers show a window is exhausted, and that check isn't synchronized with
sending the request. Concurrent threads can therefore each pass the check and
send their requests before either response updates rate_limit_status, letting
a burst of threads momentarily exceed the per-minute limit (Metron's server-side
limit still applies and will reject the excess requests).
If you're calling a shared Session from multiple threads, cap your own
concurrency instead of relying on Session to do it for you, e.g. keep a
ThreadPoolExecutor at or below the burst limit:
from concurrent.futures import ThreadPoolExecutor
m = mokkari.api(username, password)
# Keep worker count at or below the burst limit (20/min at minimum) to avoid
# racing past the local rate-limit check.
with ThreadPoolExecutor(max_workers=20) as executor:
issues = list(executor.map(m.issue, issue_ids))
Pacing (opt-in)
Passing rate_limiter closes the gap described above: instead of racing past an
advisory check, every HTTP send is dispatched through the rate limiter first,
which can block a caller until capacity actually frees rather than letting it
send anyway. mokkari.rate_limit.HeaderPacedRateLimiter is a ready-to-use
implementation. It sizes the per-minute window from the X-RateLimit-* headers
but paces it from its own monotonic log of send times, so a local clock that has
drifted from Metron's doesn't matter, and it spaces sends evenly across the
window (at the 20/min floor, one every 3 seconds). If Metron still answers with
a 429, it backs every caller off by the Retry-After value the server sent:
from concurrent.futures import ThreadPoolExecutor
import mokkari
from mokkari.rate_limit import HeaderPacedRateLimiter
m = mokkari.api(username, password, rate_limiter=HeaderPacedRateLimiter())
with ThreadPoolExecutor(max_workers=20) as executor:
issues = list(executor.map(m.issue, issue_ids))
The limiter only blocks for the per-minute window, whose waits are seconds long.
When the daily limit is exhausted it raises RateLimitError instead of blocking
for what could be hours, with retry_after set to the time until the daily
window resets. That leaves it to your application to tell the user and either
wait or quit:
import time
from mokkari.exceptions import RateLimitError
from mokkari.session import format_time
try:
issue = m.issue(31660)
except RateLimitError as e:
if input(f"Daily limit reached. Wait {format_time(e.retry_after)}? (y/n): ") == "y":
time.sleep(e.retry_after)
issue = m.issue(31660)
Paginated list calls follow the same rules: if a page is rejected with a 429
they retry it through the limiter, which blocks until it's safe to send, and an
exhausted daily limit raises RateLimitError from the list call rather than
being waited out.
A rate limiter is scoped to the Session it's passed to — construct one per
Session rather than sharing an instance across sessions using different
credentials. Passing your own object works too, as long as it implements the
acquire/on_rate_limited/release methods described in
mokkari.rate_limit.RateLimiter.
Leaving rate_limiter unset (the default) keeps the raise-immediately behavior
described above.
Connection Reuse
A Session keeps its connections to Metron open between requests, so repeated
calls don't pay a new TCP/TLS handshake each time. Cookies are never stored or
sent back. To release the connections deterministically, use the session as a
context manager or call close():
with mokkari.api(api_token="your-token") as m:
issue = m.issue(1)
Closing is optional, and a closed session can still be used; it just opens new
connections. If the server drops an idle connection, the underlying HTTP library
notices and discards it when the next request checks it out, so a request opens
a fresh connection instead. The only failure is a race: if the server closes a
connection in the instant it is reused, that request raises an ApiError. This
is rare, and mokkari doesn't retry it automatically. Don't share a Session
across forked processes; create one per process.
Documentation
Read the project documentation
Bugs/Requests
Please use the GitHub issue tracker to submit bugs or request features.
1 maintainer
Metadata
1 maintainer
Release files for mokkari 4.8.0
For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.
Source distribution (sdist)
| File | Size | Uploaded | |
|---|---|---|---|
| mokkari-4.8.0.tar.gz | 98.2 kB | Details |
Built distribution (wheel)
| File | Interpreter | ABI | Platform | Reset |
|---|---|---|---|---|
| mokkari-4.8.0-py3-none-any.whl | Python 3 | none | any | Details |
Total release size: 168.3 kB
Release files / mokkari-4.8.0.tar.gz
| Download URL | mokkari-4.8.0.tar.gz |
|---|---|
| Size | 98.2 kB |
| Tags | Source |
|
SHA-256 checksum How to use checksums |
686a682c72ca805089941d5d3ac8254373bc98543a921b47ca137ab1704af9b6
|
|
BLAKE2b-256 checksum How to use checksums |
fdf7c260a12f8b700a0e6d046401b19298d21178ded043ab8d9c26eace5cc21c
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
No |
| Uploaded via |
uv/0.12.17 {"installer":{"name":"uv","version":"0.12.17","subcommand":["publish"]},"python":null,"implementation":{"name":null,"version":null},"distro":{"name":"Ubuntu","version":"24.04","id":"noble","libc":null},"system":{"name":null,"release":null},"cpu":null,"openssl_version":null,"setuptools_version":null,"rustc_version":null,"ci":true}
|
Release files / mokkari-4.8.0-py3-none-any.whl
| Download URL | mokkari-4.8.0-py3-none-any.whl |
|---|---|
| Size | 70.1 kB |
| Tags | Python 3 |
|
SHA-256 checksum How to use checksums |
e0e8ea41c472fdad53a5cf939b5eb767d4cbcf740676b1b64a0f1ef7c8afe753
|
|
BLAKE2b-256 checksum How to use checksums |
e363839948955f67650bddb2ccf9da60b1dd1bb35c05e7ef27161155f7adec38
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
No |
| Uploaded via |
uv/0.12.17 {"installer":{"name":"uv","version":"0.12.17","subcommand":["publish"]},"python":null,"implementation":{"name":null,"version":null},"distro":{"name":"Ubuntu","version":"24.04","id":"noble","libc":null},"system":{"name":null,"release":null},"cpu":null,"openssl_version":null,"setuptools_version":null,"rustc_version":null,"ci":true}
|
