momwire

A pure-Python method-of-moments antenna simulator with optional C++ accelerators (pybind11).

Extracted from antenna_designer.

Solvers

BSplineSolver (degree-d Galerkin, default d=1/2) is the default solver; HMatrixSolver and ArrayBlockSolver are structural accelerators built on top of it. SinusoidalSolver and SinusoidalGalerkinSolver reproduce NEC2's three-term basis (collocation and Galerkin testing respectively) as in-codebase NEC comparators. RazorSolver is the NEC-5 formulation twin: a tent basis with razor-blade (RWG mixed-potential path) testing, transcribed from the NEC-5 Users Manual rather than NEC2's, free space only. Because its testing rule — not its basis, which it shares with BSplineSolver(degree=1) — is NEC-5's own, it reproduces NEC-5's characteristic slow O(1/N) impedance walk without needing the (licensed) NEC-5 binary; see docs/razor-solver.md (momwire#309).

Ports

Every solver family exposes the same port surface, and it is the surface to build on: compute_port_solution() runs one fill and one factorisation over every port at once, so a multi-port structure costs what a single-port one costs.

Three kinds of port, declared at construction, and they can be mixed:

Ports are numbered [feeds…, junction_ports…, node_gaps…], and that is the order every port readout is in.

sol = solver.compute_port_solution()  # one fill, one factorisation
sol.y  # (n_ports, n_ports) short-circuit Y
sol.coeffs  # (n_dof, n_ports) — column j is the
#   solution for 1 V at port j
sol.port_currents  # the same matrix as `y`, asserted

compute_y_matrix() is compute_port_solution().y, so the two cannot drift. Any other excitation is coeffs @ V with no second fill — that is the point of the class. To turn a column into currents on the structure, use the solver's currents_at_knots(coeffs[:, j]), or element_currents(coeffs[:, j], subdiv=…) for the (mid, moment, nodes, delta) source terms a field evaluator wants. PortSolution.basis is an opaque per-solve handle — do not introspect it.

Decks

momwire.deck reads a NEC-2 deck and puts it on a solver. The dialect — which cards run, which are refused and in exactly what words — is specified at momwire.dev/reference/deck-grammar-nec2/; that page is normative, and the code is tested against its anchors.

from momwire.deck import build_solver, parse

deck = """CM 20 m dipole, 10 m up over average ground
CE
GW 1 21 -5.05 0. 10. 5.05 0. 10. 1.E-3
GE 1
GN 2 0 0 0 13. 0.005
EX 0 1 11 0 1. 0.
FR 0 1 0 0 14.1
XQ
EN
"""
built = build_solver(parse(deck), basis="bspline")
y = built.solver.compute_port_solution().y
port = built.ports.feed_ports[0]  # the solver row this EX card drives
print(f"Z = {1.0 / y[port, port]:.1f} ohm")  # Z = 67.0-41.1j ohm

parse() returns a dialect-neutral DeckModel; build_solver() maps it onto one of the seven BASES names (five solver families — "bspline" is the default, the degree-2 B-spline) and returns the solver together with a PortPlan. The plan is what makes the solver's ports readable: which row is which EX or LD card, each load's LoadSpec, and one drive vector per execute group over a port set that never changes. Stamping a load impedance is port algebra and stays with the consumer — momwire.deck puts the gap in the matrix and hands over the spec.

A deck's execute groups are what the model says about running it: one per execute card, each carrying its own frequency list, kernel flag and Environment (the ground, its plane and a cliff's second medium). A GN card arms, so a deck may run once in free space and once over ground and each group says which; build_solver(model, group=k) builds over group k's, and frequency_mhz=, extended_kernel= and environment= override it.

Only the operating point moves between those calls, never the geometry, so a swept caller translates once:

from momwire.deck import prepare_mesh

mesh = prepare_mesh(model)  # the polylines, the port plan
solvers = [build_solver(model, mesh=mesh, frequency_mhz=f) for f in sweep]

Every solver built from one handle is given the same coordinate arrays, so a prepared solve is bit-equal to an unprepared one.

SimNEC portal

Installing momwire puts momwire-nec2c on your path — a resident NEC engine speaking the protocol SimNEC uses to drive nec2c, with momwire's solver behind it. Point SimNEC's NEC portal dialog at that command and its Smith chart, tuner and sweeps run on momwire. python -m momwire.portal is the long spelling, and --selftest is the deployment smoke.

momwire-nec2c -version                            # NEC2momwire.<major>.<minor>
momwire-nec2c --selftest                          # PASS / FAIL, no checkout needed
momwire-nec2c --basis sinusoidal < dipole.nec     # or run a deck by hand

Setup, the two filename rules SimNEC enforces, --basis, the caching flags and what refusals look like: momwire.dev/reference/portal-usage/.

momwire.portal may use the solver API and momwire.deck; nothing else in momwire may import from it. The SimNEC protocol is the portal's business alone, and a test enforces that.

Public names

Everything importable from momwire itself. __all__ is the source of truth — tests/test_public_surface_954.py fails if this list and __all__ disagree in either direction, so a name promoted without a line here (or a line here for a name that was never exported) is a red test, not a stale doc.

Solvers — see Solvers above for what distinguishes them:

• BSplineSolver — degree-d Galerkin, the default.
• HMatrixSolver, ArrayBlockSolver — structural accelerators over it.
• SinusoidalSolver, SinusoidalGalerkinSolver — NEC2's three-term basis.
• RazorSolver — the NEC-5 formulation twin, free space only.
• PulseSolver, HarringtonSolver — the textbook pair.

Results and control:

• PortSolution — a solved port network's currents, voltages and Z.
• FeedPlacement — where a solver put a feed (or a Razor lumped load): the arclength asked for, the one used, and the offset between them. Returned by every solver's feed_placements() (momwire#1059).
• Capabilities — what a solver class declares it spans.
• CancelToken, SolveAborted — cooperative cancellation for a long solve.
• LatticeFFTUnavailable — raised when a lattice deck cannot take the FFT path.
• accelerated — True iff the C++ accelerator loaded. Assert it rather than discovering a silent fall-back to pure Python by its runtime.
• accelerator_variant — which build of it loaded: "avx2", "sse2", "legacy" (the single unsuffixed extension macOS and non-x86 still ship), or None when none did. On x86 the wheel carries the same kernels compiled twice and picks by CPU feature before importing either, because an AVX2 binary on an older CPU does not raise ImportError — it kills the interpreter with an illegal instruction (momwire#1032).

Wire material, for a consumer mirroring the loading into another tool:

• wire_internal_impedance, insulation_inductance — the per-metre quantities.
• equivalent_radius — the coated-wire pair's effective radius.

Answers a consumer must give IDENTICALLY to momwire, exported so it cannot answer them differently:

• ground_touch_tol — is this wire end on the plane (a per-wire relative tolerance; an invented absolute one disagrees at the margin).
• grounded_crossing_exemption — does this in-plane junction earn the crossing exemption.
• below_reach_refusal — how far a buried structure may span before the below/below remainder stops being tabulated.
• wire_to_element — the geometry conversion the array-block path uses.
• SURFACE_HEIGHT_CLASS — the low-stand-off class's measured conditioning, including the validity floor a consumer refuses against.

Capability axes:

• axes_for — every axis of one capability row, declared union derived. The single derivation point: a consumer re-deriving ground_model from grounds, or wire_position from buried/contact, is the drift this exists to prevent.
• AXIS_VALUES — the declared vocabulary.
• DERIVED_AXES — which axes are computed rather than declared.

Install

python3 -m venv .venv
source .venv/bin/activate
pip install --upgrade pip
pip install -e .

macOS: the C++ accelerator uses Homebrew's OpenMP runtime, so brew install libomp is required — both to compile from source and to run the prebuilt Apple-Silicon wheel. The wheel deliberately does not bundle libomp (it links Homebrew's by absolute path) so that it shares a single OpenMP runtime with pynec-accel; two private copies in one process abort with OMP: Error #15 (or deadlock). Without libomp installed, the accelerator can't load and momwire warns and falls back to the slower pure-Python path. On Linux the system libgomp covers this, so no extra step is needed.

Test

pip install -e ".[test]"   # core + test deps (pytest, matplotlib, scikit-rf)
pytest tests/

The cross-validation against NEC2 (tests/test_pynec_backend.py) additionally needs PyNEC — a test-only dependency installed separately from a wheel (see below). Those tests skip cleanly when it isn't present; everything else runs without it.

Optional: PyNEC backend (test-only)

momwire can be cross-validated against NEC2 via PyNEC (the tests/test_pynec_backend.py suite); NEC2 also delivers ~5–10× faster single-frequency solves. PyNEC is a test-flow-only dependency — momwire's own solver never imports it.

Install the PyNEC wheel

Install PyNEC from the python-necpp fork's release. The distribution is named pynec-accel (the import name stays PyNEC); the wheels are self-contained — OpenBLAS is vendored (via scipy-openblas32), so no system BLAS, SWIG, or build toolchain is needed — and cover Linux, Windows, and macOS (arm64) on CPython 3.10–3.14:

pip install pynec-accel --no-index \
    --find-links https://github.com/stevenmburns/python-necpp/releases/expanded_assets/v1.7.6

--no-index ensures pip takes the fork's wheel rather than upstream PyNEC on PyPI (which is broken on current Python and lacks the OpenBLAS/OpenMP work). On macOS the wheel shares Homebrew's libomp (brew install libomp) rather than vendoring its own, so it can coexist with momwire's accelerator in one process. After install, from PyNEC import nec_context works and the cross-validation tests run; without it they're skipped (momwire itself needs no PyNEC).

Runtime thread pinning

The wheel links OpenBLAS and parallelises the NEC2 matrix fill with OpenMP. Pick thread counts up front:

export OMP_NUM_THREADS=$(nproc --all)   # PyNEC matrix fill
export OPENBLAS_NUM_THREADS=1           # muzzle numpy/scipy's idle pool

Pinning OPENBLAS_NUM_THREADS=1 stops numpy/scipy from spinning up their own OpenBLAS thread pool that contends with PyNEC's threads on the same cores. On a 100-director Yagi (2142 segs) this is worth ~8% wall time at NP=4.