mpylab
mpylab connects laboratory instruments, measurement procedures, and traceable results.
Overview
Use mpylab to:
- describe instruments and signal paths in configurable measurement graphs;
- run TEM/GTEM, mode-stirred chamber, and amplifier measurements;
- retain physical units, uncertainties, and measurement history;
- try measurement workflows with virtual devices before using laboratory hardware;
- inspect configurations, convert calibration data, and generate reports.
mpylab is a Python framework. Applications such as TEMField provide a graphical measurement interface built on it.
Device test windows and the limit explorer include a project icon and a nonmodal About dialog with version and documentation links. Quit follows each tool's existing device shutdown path. See the GUI integration guide for using the same pattern in an application.
Installation
mpylab requires Python 3.11 or newer. Create and activate a virtual environment:
python -m venv .venv
source .venv/bin/activate
On Windows PowerShell, activate it with .venv\Scripts\Activate.ps1 instead.
Install the published package and its Python dependencies:
python -m pip install mpylab
For the limit explorer, device test windows and Qt measurement interfaces, install the optional GUI dependencies:
python -m pip install "mpylab[gui]"
The base installation supports non-GUI workflows without PySide6 or Shiboken.
The installation guide covers platform-specific steps and installation from GitLab. Communication backends for real instruments depend on the laboratory setup.
First steps
Try a complete measurement and evaluation with virtual instruments. The example scripts and configurations are provided in the repository; obtaining them requires Git. Keep the virtual environment activated, then run:
git clone https://gitlab.hrz.tu-chemnitz.de/chair-of-electromagnetic-theory-and-compatibility-at-tu-dresden/mpylab/mpylab.git
cd mpylab
python script/tem-verification.py script/conf/tem-gtem-verification-virtual/conf.py
The example needs no instruments or operator input. A successful measurement ends with:
End of TEM verification. Status: 0
Results and logs are written below script/conf/tem-gtem-verification-virtual/output/.
Inspect the available report sections in the resulting history:
mpylab-tem-report script/conf/tem-gtem-verification-virtual/output/tem-verification-virtual.p --list-sections
Continue with the first-run guide for output files, reporting, and the steps required before real hardware use.
Command-line interface
Installing mpylab provides the following commands. Replace example input paths
with your own files; run any command with --help for its complete options.
| Command | Purpose | Example |
|---|---|---|
mpylab-config-show |
Display the effective configuration without running a measurement. | mpylab-config-show measurement.py setup.py |
mpylab-config-check |
Validate an inventoried configuration package without hardware access. | mpylab-config-check config-checks.toml |
mpylab-dot-migrate |
Check or migrate legacy DOT condition identifiers. | mpylab-dot-migrate --check setup.dot |
mpylab-nport-migrate |
Check or migrate legacy NPORT INI settings. | mpylab-nport-migrate --check cable.ini |
mpylab-nport-check |
Check NPORT frequency coverage, sampling, and interpolation. | mpylab-nport-check cable.ini --json-report nport-quality.json |
mpylab-vna2dat |
Convert VNA CSV or Touchstone exports into correction-data files. | mpylab-vna2dat cable.s2p --parameter S21 --dry-run |
mpylab-tem-report |
Inspect TEM history sections or generate measurement reports. | mpylab-tem-report history.p --list-sections |
mpylab-limit-explorer |
Open the graphical browser for emission limits (requires [gui]). |
mpylab-limit-explorer |
mpylab-visa-probe |
Open one explicitly selected VISA instrument, optionally sending a query. | mpylab-visa-probe --help |
The migration commands show a dry-run diff by default; --check checks without
writing, and --write applies changes. mpylab-visa-probe accesses real hardware
when given an instrument resource; its example above only displays help.
Documentation
- Getting started — English / Deutsch — installation and a first virtual measurement.
- Measurement workflows — TEM/GTEM, mode-stirred chamber, and amplifier procedures.
- Configurations — DOT graphs, device INIs, calibration data, validation, and VNA conversion.
- Results and reports — history files, evaluated data, immunity interchange, and report generation.
- Framework guide and API reference — architecture, drivers, measurement classes, and extension points.
Help and contributing
Start with troubleshooting or report a problem through the issue tracker. For development setup and checks, see CONTRIBUTING.md.
Original author and principal developer: Hans Georg Krauthäuser (hgk@ieee.org), Chair for Electromagnetic Theory and Compatibility, Technische Universität Dresden. See CONTRIBUTORS.md for contributor acknowledgements and roles.
License
mpylab is distributed under GPL-3.0-or-later.
1 maintainer
Metadata
1 maintainer
Release files for mpylab 1.0.33
For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.
Source distribution (sdist)
| File | Size | Uploaded | Provenance | |
|---|---|---|---|---|
| mpylab-1.0.33.tar.gz | 17.5 MB | Without provenance | Details |
Built distribution (wheel)
| File | Interpreter | ABI | Platform | Reset |
|---|---|---|---|---|
| mpylab-1.0.33-py3-none-any.whl | Python 3 | none | any | Details |
Total release size: 18.5 MB
Release files / mpylab-1.0.33.tar.gz
| Download URL | mpylab-1.0.33.tar.gz |
|---|---|
| Size | 17.5 MB |
| Tags | Source |
|
SHA-256 checksum How to use checksums |
f022c7f49b584416c5b87a6c6c5b09c56b74b792ccbac87c67802d214439d40e
|
|
BLAKE2b-256 checksum How to use checksums |
e1601c21d766721816c7fa74d0d0b55cb0ba02955065033deec830bfea187558
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
No |
| Uploaded via |
twine/7.0.0 CPython/3.13.16
|
Release files / mpylab-1.0.33-py3-none-any.whl
| Download URL | mpylab-1.0.33-py3-none-any.whl |
|---|---|
| Size | 967.2 kB |
| Tags | Python 3 |
|
SHA-256 checksum How to use checksums |
039c0ea562c1b5bccd4eab913657a8e9bdd0222e4bc04de94d074a58ce6689c9
|
|
BLAKE2b-256 checksum How to use checksums |
563ff1f1e0a03f6e894f0a907fa4a996aa2ca4af6b145546abc0f84b075074bf
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
No |
| Uploaded via |
twine/7.0.0 CPython/3.13.16
|
Security for mpylab 1.0.33
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
No provenance found
None of the files in this release were uploaded with provenance metadata.
A note on package security
PyPI is a repository for distributing packages, not a service for auditing them. While third-party security researchers and our staff do their best to detect and remove malicious packages, PyPI cannot guarantee the quality, security or suitability of any given package.
To learn more about protecting yourself from malicious actors, visit our package security documentation.
