mqtt-sn-12 1.0.6

Client for protocol MQTT-SN 1.2

mqttsn12-python3-client

Python3 Client implementation of the Protocol MQTT-SN 1.2 (https://mqtt.org/mqtt-specification/ or https://groups.oasis-open.org/higherlogic/ws/public/document?document_id=66091).

The library was tested with EMQX (https://www.emqx.com/en) and Hive MQ Edge (https://www.hivemq.com/products/hivemq-edge/).

Start from this url http://www.steves-internet-guide.com/mqtt-sn/ for understanding more about the protocol MQTT-SN.

The whole project is available on https://github.com/marcoratto/mqttsn12-python3-client

Use

Along with the library, two command-line tools are provided: mqtt_sn_pub and mqtt_sn_sub

Create a Python environment python -m venv env

Enable the new Python environment source env/bin/activate

Install the library pip install mqtt-sn-12

Execute the publisher client tool mqtt_sn_pub

Execute the subscriber client tool mqtt_sn_sub

mqtt_sn_pub

usage: mqtt_sn_pub [opts] -t <topic> -m <message>

MQTT-SN publisher in Python

options:
  -t, --topic TOPIC     MQTT-SN topic name to publish to
  -m, --message MESSAGE
                        Message payload to send
  -d, --enable-debug    Enable debug messages
  -c, --disable-clean-session
                        Disable clean session / enable persistent client mode
  -f, --file FILE       A file to send as the message payload
  -h, --host HOST       MQTT-SN host to connect to (default: 127.0.0.1)
  -i, --clientid CLIENTID
                        Client ID to use. Defaults to 'mqtt-sn-python-' + pid
  -I, --id-prefix       Define client id as prefix + pid (useful with broker clientid_prefixes)
  -k, --keepalive KEEPALIVE
                        Keep alive in seconds (default: 30)
  -e, --sleep SLEEP     Sleep duration in seconds when disconnecting (default: 0)
  -l, --line-mode       Read messages from stdin, sending a separate message for each line
  -n, --null-message    Send a null (zero length) message
  -p, --port PORT       Network port (default: 2442)
  -q, --qos {-1,0,1}    Quality of Service (-1, 0, 1). Default: 0
  -r, --retain          Mark the message as retained
  -s, --stdin-message   Read one whole message from STDIN
  -T, --topicid TOPICID
                        Pre-defined MQTT-SN topic ID to publish to
  --timeout TIMEOUT     Timeout (default: 60)
  --will-payload WILL_PAYLOAD
                        Payload for the client Will
  --will-qos {0,1}      QoS level for the client Will. Default: 0
  --will-retain         Make the client Will retained
  --will-topic WILL_TOPIC
                        The topic on which to publish the client Will
  --repeat REPEAT       Repeat publish N times (default: 1)
  --repeat-delay REPEAT_DELAY
                        Delay in seconds between repeats (default: 0)

mqtt_sn_sub

usage: mqtt_sn_pub [opts] -t <topic> -m <message>

MQTT-SN publisher in Python

options:
  -t, --topic TOPIC     MQTT-SN topic name to publish to
  -d, --enable-debug    Enable debug messages
  -c, --disable-clean-session
                        Disable clean session / enable persistent client mode
  -h, --host HOST       MQTT-SN host to connect to (default: 127.0.0.1)
  -i, --clientid CLIENTID
                        Client ID to use. Defaults to 'mqtt-sn-python-' + pid
  -I, --id-prefix       Define client id as prefix + pid (useful with broker clientid_prefixes)
  -k, --keepalive KEEPALIVE
                        Keep alive in seconds (default: 30)
  -e, --sleep SLEEP     Sleep duration in seconds when disconnecting (default: 0)
  -p, --port PORT       Network port (default: 2442)
  -C, --msg-count MSG_COUNT
                        disconnect and exit after receiving the 'msg_count' messages.
  -1, --one             exit after receiving a single message.
  -q, --qos {0,1}       Quality of Service (0, 1). Default: 0
  -s, --stdin-message   Read one whole message from STDIN
  -T, --topicid TOPICID
                        Pre-defined MQTT-SN topic ID to publish to
  --timeout TIMEOUT     Timeout (default: 60)
  --will-payload WILL_PAYLOAD
                        Payload for the client Will
  --will-qos {-1,0,1}   QoS level for the client Will. Default: 0
  --will-retain         Make the client Will retained
  --will-topic WILL_TOPIC
                        The topic on which to publish the client Will

Code Coverage

The following table summarizes the code coverage of the library:

Name	Stmts	Miss	Cover
src/mqttsn12/MqttSnConstants.py	61	0	100%
src/mqttsn12/__init__.py	0	0	100%
src/mqttsn12/client/MqttSnClient.py	708	126	82%
src/mqttsn12/client/MqttSnClientException.py	12	8	33%
src/mqttsn12/client/__init__.py	0	0	100%
src/mqttsn12/packets.py	982	348	65%
tests/unit_test_publisher.py	113	1	99%
tests/unit_test_subscriber.py	293	20	93%
TOTAL	2169	503	77%

Message Types

Below you can find the list of the Message Type implemented:

MsgType	Field	Status	Note
0x00	ADVERTISE	NA
0x01	SEARCHGW	Implemented
0x02	GWINFO	Implemented
0x03	reserved	NA
0x04	CONNECT	Implemented
0x05	CONNACK	Implemented
0x06	WILLTOPICREQ	Implemented
0x07	WILLTOPIC	Implemented
0x08	WILLMSGREQ	Implemented
0x09	WILLMSG	Implemented
0x0A	REGISTER	Implemented
0x0B	REGACK	Implemented
0x0C	PUBLISH	Implemented
0x0D	PUBACK	Implemented
0x0E	PUBCOMP	NA
0x0F	PUBREC	NA
0x10	PUBREL	NA
0x11	reserved	NA
0x12	SUBSCRIBE	Implemented
0x13	SUBACK	Implemented
0x14	UNSUBSCRIBE	Implemented
0x15	UNSUBACK	Implemented
0x16	PINGREQ	Implemented
0x17	PINGRESP	Implemented
0x18	DISCONNECT	Implemented
0x19	reserved	NA
0x1A	WILLTOPICUPD	Implemented
0x1B	WILLTOPICRESP	Implemented
0x1C	WILLMSGUPD	Implemented
0x1D	WILLMSGRESP	Implemented
0x1E-0xFD	reserved	NA
0xFE	Encapsulated message	NA
0xFF	reserved	NA