Skip to main content

A small example package

Project description

Installation

This project is developed and tested on python version 3.7.4. Please check your python version using python --version. If your system has a different python version, you may want to consider using pyenv (See Using pyenv)

First, clone and cd into the repository:

git clone https://gitlab.com/ailabuser/bacha_hybrid_mroi_face_detection
cd bacha_hybrid_mroi_face_detection

On Windows:

Create a python virtual environment:

mkvirtualenv venv

Activate the virtual environment (deactivate to deactivate the virtual environment):

workon venv

Install all the required dependencies while still having the virtual environment active:

pip install -r requirements.txt

On Linux:

Create a python virtual environment:

virtualenv -p /usr/bin/python3 venv

Activate the virtual environment (deactivate to deactivate the virtual environment):

source venv/bin/activate

Install all the required dependencies while still having the virtual environment active:

pip install -r requirements.txt

Using pyenv (Linux, Windows, MacOS)

If your python version is not 3.7.4, you may want to use pyenv. After you have installed pyenv, install the specific python version. On Linux, this can be done by running the following command:

env PYTHON_CONFIGURE_OPTS="--enable-shared" pyenv install 3.7.4

Then, create a virtual environment:

pyenv virtualenv 3.7.4 bacha_mroi_face_detection

You can activate the virtual environment using pyenv like so:

pyenv activate bacha_mroi_face_detection

Description

The face detection technique used hybrid margin-based region of interest (MROI) approach. It is hybrid in the sense that the implementation runs one main routine to detect a face, but switch to an escape routine when the main routine fails. Using MROI increase the face detection speed by having the selected face detection algorithm to only consider a sub-region (where a face was previously detected) instead of the full frame.

There are three pre-defined selection of main routines available for you to use:

  1. Haar cascade classifier
  2. Joint cascade
  3. Multi-task Convolutional Neural Network (MTCNN)

When the main routine failed to detect a face, the implementation switch to the escape routine which runs template matching algorithm.

Furthermore, there are five possible different hybrid combinations of the face detection approach, in addition to a non-hybrid approach using only the main routine.

  1. Normal routine only (N)
  2. Normal routine with fixed-margin (FM)
  3. Normal routine with dynamic-margin (DM)
  4. Normal routine with escape routine (NTM)
  5. Normal routine with fixed-margin and escape routine (FMTM)
  6. Normal routine with dynamic-margin and escape routine (DMTM)

Three video sources are also supported:

  1. Webcam
  2. Kinect
  3. Video files

For example to use Haar cascade classifier as the main routine using FM approach while using image frames from your webcam, you can run the following on Linux (while having the virtual environment active):

./main.py webcam haar fm

You can run the program without any argument to print a help message (or by supplying it with -h) for more information about the usage of the program.

Example

Using the hybrid MROI for your face detection implementation

In order to use your face detection algorithm with the hybrid MROI face detector, you need to create a subclass which inherit from FaceDetector, and override its detect method. The implementation requires thedetect method to return either a face ROI or None; otherwise, the hybrid MROI face detector may fail.

Here's an example, in which we use a python implementation of MTCNN:

import cv2
from mtcnn.mtcnn import MTCNN
from routines import FaceDetector

class MROI_MTCNN(FaceDetector):

    def __init__(self):

    	# The main routine face detector object used to detect faces.
        fd_obj = MTCNN()

	# Initialize using base class constructor. We pass the face detector
	# object (fd_obj) and use the MROI with fixed-margin approach with
	# a template matching escape routine.
        super().__init__(fd_obj, mode=FaceDetector.FMTM)

    @staticmethod
    def detect(fd_obj, image):

        rgb_src = cv2.cvtColor(image, cv2.COLOR_BGR2RGB)
        result = fd_obj.detect_faces(rgb_src)

        if len(result) > 0:
            return result[0]['box']
        else:
            return None

Internally, this was basically how the pre-defined hyrbid MROI face detectors (i.e., MROI_HaarCascade and MROI_MTCNN) was defined. Simply import them with

from routines import MROI_HaarCascade, MROI_MTCNN

Running the face detector

To use the face detector, simply instantiate the hybrid MROI face detector and run it by invoking its run method. Below is a simple script that runs the face detector and feed it images in a loop.

fd = MROI_MTCNN()
fd.run() # This runs the face detector in the background.

while True:
	ret, frame = cv2.VideoCapture("/path/to/video/file")

	# No more images; exit.
	if not ret:
		break

	# Feed the image into the face detector.
	fd.input_image(frame)

	# Get the ROI containing the face. This will be `None` if no face is
	# detected.
	ROI = fd.get_face_region()

	if ROI is not None:
		x, y, w, h = ROI
		cv2.rectangle(frame, (x, y), (x+w, y+h), (0, 255, 0), 2)

	cv2.imshow("MROI_MTCNN Face Detector", frame)

	if cv2.waitKey(1) == ord('q'):
		break

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Files for mroi-fd-amenji, version 0.0.4
Filename, size File type Python version Upload date Hashes
Filename, size mroi_fd_amenji-0.0.4-py3-none-any.whl (12.1 kB) File type Wheel Python version py3 Upload date Hashes View hashes
Filename, size mroi-fd-amenji-0.0.4.tar.gz (8.4 kB) File type Source Python version None Upload date Hashes View hashes

Supported by

Elastic Elastic Search Pingdom Pingdom Monitoring Google Google BigQuery Sentry Sentry Error logging AWS AWS Cloud computing DataDog DataDog Monitoring Fastly Fastly CDN DigiCert DigiCert EV certificate StatusPage StatusPage Status page