MX Remote - Python Client for Pulse-Eight MatrixOS devices

Python 3 library for discovering and controlling Pulse-Eight AV distribution hardware over a local network: video/audio matrices, HDMI-over-IP encoders/decoders, multiviewers, and audio amplifiers. Supports device discovery, video/audio routing, volume control, remote-control key passthrough, HDMI-over-IP streaming, multiviewer control, and more.

If you are looking to integrate Pulse-Eight neo, OneIP, or ProAmp8 devices into your own software or home-automation system, this is the library for it.

Documentation: opdenkamp.github.io/mx-remote

What is MX Remote?

MX Remote is the network protocol these Pulse-Eight devices use to discover and control one another over UDP (multicast or broadcast). All of them run the shared MatrixOS firmware, which speaks this protocol natively. This library is a client implementation of that protocol — its purpose is to expose the devices to third-party software.

Supported devices

All devices below run MatrixOS and are controlled through the same protocol:

Pulse-Eight neo — HDBaseT video/audio matrices (neo:4, neo:8, neo:X, and splitters)
Pulse-Eight OneIP — HDMI-over-IP units: Transmitter (TX), Receiver (RX), Transceiver (TZ), and Multiviewer
Pulse-Eight ProAmp8 — 8-zone audio amplifier with Dolby support

Requirements

Python 3.11 or later
Network access to one or more of the Pulse-Eight devices above (multicast or broadcast)

Installation

pip install .

Quick Start

The minimum code to discover devices on the network:

import asyncio
import mx_remote

async def main():
    mx = mx_remote.Remote()
    await mx.start_async()

    # wait for devices to be discovered
    await asyncio.sleep(5)

    for uid, device in mx.remotes.items():
        print(f"{device.serial} ({device.name}) - {device.model_name} - {device.status}")
        for port, bay in device.bays.items():
            print(f"  {bay.bay_label} [{bay.mode}] signal={bay.signal_detected}")

    await mx.close()

asyncio.run(main())

Documentation

The guides below are published at opdenkamp.github.io/mx-remote alongside an API reference generated from the docstrings, and are readable here in docs/.

Page	Covers
Configuration	Opening a connection and keeping it in step with the mesh.
Devices and bays	Naming, hiding, EDID and the device registry.
Routing	Selecting video and audio sources for an output.
Callbacks	Reacting to state changes rather than polling for them.
Audio	Volume, mute and remote-control passthrough.
OneIP and V2IP	Streaming endpoints, stream sources and statistics.
Multiviewer	Layout, sources and output configuration.
Diagnostics	Network status, the mxr console app and capture replay.

Other languages

The same protocol, implemented independently:

Go — https://github.com/opdenkamp/mx-remote-golang
Rust — https://github.com/opdenkamp/mx-remote-rust (also ships a C ABI, for C and C++)

Python is the oldest of the three and the one that still decodes what older firmware sent: 0x06, 0x36 and 0x47 are superseded opcodes kept because a unit on older firmware still emits them. So it decodes a slightly wider set than the others, and the difference is deliberate rather than drift.

License

BSD 3-Clause License. See LICENSE for details.

Metadata

Release files for mx-remote 5.7.0

For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.

Source distribution (sdist)

Source distribution for mx-remote 5.7.0
File	Size	Uploaded
mx_remote-5.7.0.tar.gz	226.5 kB	Sep 8, 2026	Details

Built distribution (wheel)

Table of built distributions (wheels) for mx-remote 5.7.0
File	Interpreter	ABI	Platform	Reset
mx_remote-5.7.0-py3-none-any.whl 230.1 kB Sep 8, 2026	Python 3	none	any	Details

Total release size: 456.7 kB

Release files / mx_remote-5.7.0.tar.gz

Download URL	mx_remote-5.7.0.tar.gz
Size	226.5 kB
Tags	Source
SHA-256 checksum How to use checksums	`72b05d40d4db7765d3d5745220ed524ec65996cb2a53063b50821d7db6bdbd33`
BLAKE2b-256 checksum How to use checksums	`40b0f4a1f146dfb4607631da896b1a341fe3028da7459c325ff92ea004a16c4c`
Upload date	Sep 8, 2026
Uploaded using Trusted Publishing? What is trusted publishing?	No
Uploaded via	`twine/7.0.0 CPython/3.12.6`

Release files / mx_remote-5.7.0-py3-none-any.whl

Download URL	mx_remote-5.7.0-py3-none-any.whl
Size	230.1 kB
Tags	Python 3
SHA-256 checksum How to use checksums	`01f57156fdeb4d04ac1fb14221b6f153102af689ecd1668e29546757e97f017e`
BLAKE2b-256 checksum How to use checksums	`fefe9956d2b8f626b0b9e133347e4d2e6266ad8b5cec70235096f37da0f2dfe8`
Upload date	Sep 8, 2026
Uploaded using Trusted Publishing? What is trusted publishing?	No
Uploaded via	`twine/7.0.0 CPython/3.12.6`