neewer 0.1.3

Python control library for Neewer TL-series RGB tube lights over Bluetooth LE

neewer

Python control library for Neewer TL-series RGB tube lights (TL120C / TL90C and friends) over Bluetooth LE — no app, no pairing.

import asyncio
from neewer import Fleet

async def main():
    async with Fleet() as fleet:              # scan + connect everything in range
        await fleet.set_hsi("all", 240, 100, 100)     # all lights blue

asyncio.run(main())

The typed methods (set_hsi, power, set_cct, …) are the primary API. A one-line string grammar (fleet.dispatch("all hsi 240 100 100")) is also available as a convenience — see The string grammar.

Or from the terminal:

$ neewer scan                     # list the lights it can see
$ neewer all hsi 240 100 100      # everything blue
$ neewer all power off
$ neewer t1 cct 100 5600          # position 1 -> 5600 K

Firmware flashing lives in its own tool, neewer-ota (dry-run by default; --confirm writes). Stop anything else holding the light first:

$ neewer-ota <MAC> --file fw.bin --check     # connect, probe, validate, no write
$ neewer-ota <MAC> --file fw.bin --confirm   # actually flash

What you get

• neewer.Fleet — the batteries-included BLE client: continuous discovery, persistent connections, an auto-reconnect supervisor (exponential backoff + jitter) that survives a light being switched off or grabbed by another device, target addressing (all / t<N> / MAC / alias / group), and typed methods for every action. Subscribe with fleet.subscribe(cb) to be notified on any state change (connect / disconnect / telemetry / command) instead of polling.
• neewer.protocol — the pure, standard-library-only frame/reply/model layer, including the typed command model (neewer.protocol.commands, one dataclass per action, with the shared commands.ACTIONS argument-order registry) and neewer.protocol.dmx DMX-over-IP personalities (hsi, cct, rgb, rgbw) plus WriteGovernor, a self-tuning per-connection write pacer that keeps each tube at or below its measured BLE delivery rate (dropping the newest frame rather than backing up the Bluetooth transmit queue). It never imports bleak, so a non-BLE transport (an ESP32 bridge, a UART gateway) can reuse all the frame knowledge without a radio.
• neewer.transport — the radio seam: a Transport Protocol with a bleak-backed default (BleakTransport). Fleet takes transport= so you can inject a fake (for tests) or an alternative backend. neewer.fleet itself imports without bleak; only the transport pulls it in, lazily.
• neewer.errors — typed errors (UnknownTarget / UnknownAction / Unsupported / …); command failures raise, they don't return sentinel strings.
• neewer.grammar — the opt-in <target> <action> [args] string grammar (parse, dispatch, OSC mapping) layered over the typed API. Register extra verbs with fleet.register_verb(name, handler).
• neewer.effects — animation engines (comet / hue-flow / palette) that run against a held Fleet.
• neewer.devices — the device book: give your lights human names, physical positions, and groups in ~/.config/neewer/devices.toml.

The package ships type hints (py.typed).

Install

$ pip install neewer

Requires Python 3.11+. The only runtime dependency is bleak.

The typed API

Every action is a method on Fleet; the first argument is always a target (all / t<N> / MAC / alias / group):

Method	Example
power(target, on)	await fleet.power("all", False)
set_hsi(target, hue, sat=100, bri=100)	await fleet.set_hsi("t1", 240, 100, 80)
set_cct(target, bri, temp, gm=50)	await fleet.set_cct("t1", 100, 56)
set_bri(target, bri)	await fleet.set_bri("all", 50)
set_rgbcw(target, bri, r, g, b, c, w)	await fleet.set_rgbcw("t1", 60, 0, 0, 0, 255, 0)
set_xy(target, bri, x, y)	await fleet.set_xy("t1", 50, 0.3127, 0.329)
set_gel(target, hue, sat, bri, brand, gel_no)	await fleet.set_gel("t1", 45, 100, 50)
scene(target, effect, *params)	await fleet.scene("all", 3)
pixel(target, colors)	await fleet.pixel("t1", ["0", "off", "240"])
identify(target)	await fleet.identify("t2")
raw(target, hexstr)	await fleet.raw("t1", "78 81 01 01 fb")
flow(mode, **opts) / query(target) / render_state(target)	await fleet.flow("comet")

Failures raise neewer.errors.NeewerError subclasses (UnknownTarget, Unsupported, …). See examples/ for runnable scripts.

The string grammar

For REPLs, wire protocols, and one-liners, neewer.grammar parses a line of <target> <action> [args] and dispatches it to the typed API. fleet.dispatch() is a thin convenience over it:

Action	Example	Effect
power on|off	all power off	toggle
hsi <h> <s> <i>	all hsi 240 100 100	hue/saturation/intensity
cct <bri> <temp> [gm]	t1 cct 100 5600	white, colour temperature
bri <0-100>	all bri 50	brightness only
rgbcw <bri> <r> <g> <b> <c> <w>	t1 rgbcw 60 0 0 0 255 0	RGB + cold/warm white (TL120C)
xy <bri> <x> <y>	t1 xy 50 0.3127 0.329	CIE-1931 point (TL120C)
gel <hue> <sat> <bri> [brand] [no]	t1 gel 45 100 50 lee 7	gel colour (TL120C)
scene <effect> [params...]	all scene 3	built-in scene
pixel <colour...>	t1 pixel 0 off 240 k3200	per-segment palette (TL120C)
identify	t2 identify	flash to locate
flow <mode> [k=v...]	all flow comet	start a running effect
scan / state / query	state	list / read / refresh cached state

Targets: all, t<N> (physical position), a MAC, or an alias/group from your device book.

Related projects

• neewerd — a ready-made control daemon built on this library: holds the BLE links and exposes the lights over socket / MQTT (Home Assistant discovery) / OSC / HTTP + web UI / Art-Net / sACN, plus an MCP server.
• neewer-hardware — the hardware and wire-protocol reference this library implements: frame format, the full opcode table, provisioning, DMX, and per-model capabilities.

License

MIT.