netsnap 2.2.1

Comprehensive Linux network json snapshots with python library. Alternative to pyroute2 emphasizing maintainability.

NetSnap - Linux Network Monitoring Toolkit

A comprehensive package for pulling nearly all details of Linux networking into reliable and broadly usable form. From configuration to statistics, NetSnap uses the fastest available api: RTNetlink and Generic Netlink. NetSnap can fuction in either standalone fashion generating JSON output, or provide Python 3.8+ objects. NetSnap provides deep visibility into network interfaces, routing tables, neighbor tables, multicast databases, and routing rules through direct kernel communication via CFFI. More maintainable than alternatives as NetSnap avoids any hard-coded duplication of numeric constants. This improves NetSnap's portability and maintainability across distros and kernel releases since the kernel running on each system is the 'single source of truth' for all symbolic definitions.

In use cases where network configuration changes happen every second or less, where snapshots are not enough as each change must be tracked in real time, or one-time-per-new-kernel CFFI recompile time is too expensive, consider alternatives such as pyroute2.

Features

• Network Interfaces & Addresses (netsnap-device)

  • Complete interface information (physical, virtual, bridge, VLAN, WireGuard, etc.)
  • IPv4 and IPv6 address details with scope and flags
  • Bridge port configuration and STP status
  • WireGuard interface details via Generic Netlink
  • DPLL (Digital Phase-Locked Loop) pin information
  • Interface statistics and capabilities
  • MTU, MAC addresses, and link states

• Routing Tables (netsnap-route)

  • IPv4 and IPv6 routing tables
  • Main, local, and custom routing tables
  • Gateway, destination, and source addresses
  • Route metrics, preferences, and protocols
  • Multipath routes (ECMP) support
  • Route types (UNICAST, LOCAL, BROADCAST, MULTICAST, etc.)

• Neighbor Tables (netsnap-neighbor)

  • IPv4 ARP cache entries
  • IPv6 Neighbor Discovery (NDP) cache
  • Bridge FDB (Forwarding Database) entries
  • Neighbor states (REACHABLE, STALE, DELAY, PROBE, FAILED, etc.)
  • Hardware addresses and interface mappings
  • Proxy entries and router flags

• Multicast Database (netsnap-mdb)

  • Bridge multicast forwarding database
  • Multicast group memberships
  • Port-specific multicast entries

• Routing Rules (netsnap-rule)

  • IP routing policy database (RPDB)
  • Rule priorities and actions
  • Source/destination selectors
  • Table routing decisions

Installation

From PyPI

pip install netsnap

From Source

git clone https://github.com/hcoin/netsnap.git
cd netsnap
pip install -e .

Development Installation

git clone https://github.com/hcoin/netsnap.git
cd netsnap
pip install -e ".[dev]"

Requirements

• Python: 3.8 or higher
• Operating System: Linux (kernel 2.6+)
• Privileges: Root/sudo access for network queries
• Dependencies:
  • cffi >= 1.0.0
  • setuptools >= 61.0

Usage

To display all information, the commands require root privileges as they interact with kernel netlink sockets. However, partial information is returned when run with lesser privilege.

Show everything in JSON

sudo netsnap-snapnet

Network Interfaces and Addresses

# Full JSON output of all interfaces and addresses
sudo netsnap-device

# Show extended interface details
sudo netsnap-device --extended

# Show detailed address information
sudo netsnap-device --addresses

# Show only WireGuard interfaces
sudo netsnap-device --wireguard

# Show summary of special interfaces
sudo netsnap-device --summary

Routing Tables

# Full routing table in JSON
sudo netsnap-route

# Human-readable summary
sudo netsnap-route --summary

# IPv4 routes only
sudo netsnap-route --ipv4

# IPv6 routes only
sudo netsnap-route --ipv6

# Specific routing table
sudo netsnap-route --table main

# Disable unknown attribute collection
sudo netsnap-route --no-unknown-attrs

Neighbor Tables

# Full neighbor table in JSON
sudo netsnap-neighbor

# Human-readable summary
sudo netsnap-neighbor --summary

# IPv4 ARP entries only
sudo netsnap-neighbor --arp

# IPv6 NDP entries only
sudo netsnap-neighbor --ndp

# Bridge FDB entries only
sudo netsnap-neighbor --bridge

# Filter by interface
sudo netsnap-neighbor --interface eth0

Multicast Database

# Full multicast database in JSON
sudo netsnap-mdb

# Human-readable summary
sudo netsnap-mdb --summary

# Filter by interface
sudo netsnap-mdb --interface br0

Routing Rules

# Full routing rules in JSON
sudo netsnap-rule

# Human-readable summary
sudo netsnap-rule --summary

# IPv4 rules only
sudo netsnap-rule --ipv4

# IPv6 rules only
sudo netsnap-rule --ipv6

Python API

You can use NetSnap programmatically in your Python code with three different patterns:

Pattern 1: Direct Call (Recommended for single queries)

The socket is automatically opened and closed for each call:

from netsnap.device_info import RTNetlinkQuery
from netsnap.route_info import RoutingTableQuery
from netsnap.neighbor_info import NeighborTableQuery
from netsnap.rule_info import RoutingRuleQuery
from netsnap.mdb_info import MDBQuery

# Socket auto-managed per call
rtq = RTNetlinkQuery()
interfaces = rtq.get_interfaces()

rt_query = RoutingTableQuery()
routes = rt_query.get_routes()

ntq = NeighborTableQuery()
neighbors = ntq.get_neighbors()

rule_query = RoutingRuleQuery()
rules = rule_query.get_rules()

mdb_query = MDBQuery()
mdb_entries = mdb_query.get_mdb()

Pattern 2: Context Manager (Recommended for multiple queries within one function call)

Socket opened on entry, closed on exit:

from netsnap.device_info import RTNetlinkQuery
from netsnap.route_info import RoutingTableQuery
from netsnap.neighbor_info import NeighborTableQuery
from netsnap.rule_info import RoutingRuleQuery
from netsnap.mdb_info import MDBQuery

# Context manager handles socket lifecycle
with RTNetlinkQuery() as rtq:
    interfaces = rtq.get_interfaces()

with RoutingTableQuery() as rt_query:
    routes = rt_query.get_routes()

with NeighborTableQuery() as ntq:
    neighbors = ntq.get_neighbors()

with RoutingRuleQuery() as rule_query:
    rules = rule_query.get_rules()

with MDBQuery() as mdb_query:
    mdb_entries = mdb_query.get_mdb()

Pattern 3: Manual Socket Management (Recommended for multiple queries across functions using a class global instance)

Explicit control for multiple queries - avoids socket creation overhead. Don't forget to close on destroy:

from netsnap.device_info import RTNetlinkQuery
from netsnap.route_info import RoutingTableQuery
from netsnap.neighbor_info import NeighborTableQuery
from netsnap.rule_info import RoutingRuleQuery
from netsnap.mdb_info import MDBQuery

# Manual socket management for multiple queries
rtq = RTNetlinkQuery()
rtq.open()
interfaces = rtq.get_interfaces()
link_info = rtq.get_link_info()
addr_info = rtq.get_address_info()
rtq.close()

# Query multiple address families efficiently
rt_query = RoutingTableQuery()
rt_query.open()
ipv4_routes = rt_query.get_routes(family='ipv4')
ipv6_routes = rt_query.get_routes(family='ipv6')
rt_query.close()

# Query multiple neighbor types efficiently
ntq = NeighborTableQuery()
ntq.open()
arp_cache = ntq.get_neighbors(family='ipv4')
ndp_cache = ntq.get_neighbors(family='ipv6')
bridge_fdb = ntq.get_neighbors(family='bridge')
ntq.close()

# Query multiple rule families efficiently
rule_query = RoutingRuleQuery()
rule_query.open()
ipv4_rules = rule_query.get_rules(family='ipv4')
ipv6_rules = rule_query.get_rules(family='ipv6')
rule_query.close()

# Query multicast database for multiple bridges
mdb_query = MDBQuery()
mdb_query.open()
br0_mdb = mdb_query.get_mdb(bridge_ifindex=1)
br1_mdb = mdb_query.get_mdb(bridge_ifindex=2)
all_mdb = mdb_query.get_mdb()
mdb_query.close()

Output Format

All tools output JSON by default for easy parsing and integration with other tools. The JSON structure includes:

• Metadata (timestamp, hostname, kernel version)
• Summary statistics
• Detailed entries with all available attributes
• Human-readable flags and enumerations

Example output structure:

  "enp4s0": {
    "index": 2,
    "type": 1,
    "type_name": "ether",
    "mtu": 1500,
    "mac": "04:d4:c4:11:22:33",
    "operstate": 6,
    "operstate_name": "up",
    "flags": 69699,
    "flag_names": [
      "UP",
      "BROADCAST",
      "RUNNING",
      "MULTICAST",
      "LOWER_UP"
    ],
    "stats": {
      "rx_packets": 48184591,
      "tx_packets": 10588809,
      "rx_bytes": 31814972571,
      "tx_bytes": 1809544839,
      "rx_errors": 0,
      "tx_errors": 0,
       ...
      "is_64bit": true
    },
    "addresses": [
      {
        "family": "ipv4",
        "address": "10.12.119.1",
        "prefixlen": 20,
        "scope": 0,
        "scope_name": "universe",
        "flags": 0,
        "flag_names": [
          "NOPREFIXROUTE"
        ],
        "ipinterface": "10.12.119.1/20",
        "network": "10.12.112.0/20",
        "netmask": "255.255.240.0",
        "hostmask": "0.0.15.255",
        "is_secondary": false,
        "local": "10.12.119.1",
        "broadcast": "10.12.127.255",
        "label": "enp4s0",
        "cacheinfo": {
          "preferred_lft": 7660,
          "valid_lft": 7660,
          "created_tstamp": 1853,
          "updated_tstamp": 41251844,
          "preferred_lft_str": "7660s",
          "valid_lft_str": "7660s"
        },
        "extended_flags": 512,
        "readiness": "ready"
      },
      {
        "family": "ipv6",
        "address": "fc00:1002:c79::1",
        "prefixlen": 128,
        "scope": 0,
        "scope_name": "universe",
        "flags": 0,
        "flag_names": [
          "NOPREFIXROUTE"
        ],
        "ipinterface": "fc00:1002:c79::1/128",
        "network": "fc00:1002:c79::1/128",
        "netmask": "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff",
        "hostmask": "::",
        "is_temporary": false,
        "label": "",
        "cacheinfo": {
          "preferred_lft": 10482,
          "valid_lft": 10482,
          "created_tstamp": 2330,
          "updated_tstamp": 41534079,
          "preferred_lft_str": "10482s",
          "valid_lft_str": "10482s"
        },
        "extended_flags": 512,
        "readiness": "ready"
      },
      ...

Technical Details

Architecture

NetSnap uses CFFI (C Foreign Function Interface) to compile and execute C code that directly communicates with the Linux kernel via Netlink sockets. This approach provides:

• Performance: Direct system calls without subprocess overhead
• Completeness: Access to all kernel networking attributes
• Type Safety: C-level type checking and memory management
• Portability: Works across different Linux distributions

Netlink Protocols

The package implements the following Netlink protocols:

• RTNetlink (NETLINK_ROUTE): Routing, interfaces, addresses, neighbors
• Generic Netlink: WireGuard interface information
• DPLL Netlink: Hardware time synchronization

Supported Kernel Features

• Interface types: physical, VLAN, bridge, bond, veth, WireGuard, tunnel, etc.
• Bridge STP, multicast snooping, netfilter integration
• IPv4 and IPv6 routing with ECMP support
• ARP, NDP, and bridge FDB
• Multicast group management
• Policy-based routing rules

Security Considerations

• Root Access: All netsnap commands require root/sudo privileges to query kernel networking state
• Read-Only: NetSnap only reads network configuration; it never modifies kernel state
• System Impact: Minimal performance impact; queries complete in milliseconds

Troubleshooting

Permission Denied

# Error: Permission denied when opening netlink socket
# Solution: Run with sudo
sudo netsnap-device

Python Version Error

# Error: Python 3.8 or higher is required
# Solution: Upgrade Python
python3 --version  # Check current version

CFFI Compilation Error

# Error: cffi compilation failed
# Solution: Install development headers
sudo apt-get install python3-dev gcc  # Debian/Ubuntu
sudo yum install python3-devel gcc    # RHEL/CentOS

Contributing

Contributions are welcome! Please feel free to submit pull requests, report bugs, or suggest features.

Development Setup

git clone https://github.com/hcoin/netsnap.git
cd netsnap
pip install -e ".[dev]"

# Run tests
pytest

# Format code
black netsnap/

# Type checking
mypy netsnap/

License

This project is licensed under the MIT License - see the LICENSE file for details.

Acknowledgments

• Built on top of Linux kernel Netlink protocols
• Uses CFFI for efficient C integration
• Inspired by the need for comprehensive network monitoring on Linux systems
• Claude.ai for saving the author's typing time.

Author

Harry Coin [e-mail]

Version History

• 1.0.0 (2025-11-21): Initial release

  • Complete RTNetlink support for interfaces, addresses, routes, neighbors
  • Generic Netlink support for WireGuard
  • Multicast database and routing rules
  • DPLL pin information support
  • Comprehensive bridge and STP support

  See Changelog for more details.

netsnap