nettail

A NetFlow and IPFIX collector that prints flow records to the console in a readable table, annotating addresses with hostnames where it can find them. tail -f for your network.

Built for pointing a UniFi Dream Machine Pro at a workstation and actually seeing what the network is doing. Works with any exporter that speaks NetFlow v5, NetFlow v9, or IPFIX (v10).

Two dependencies, both of them halves of this program that grew up and left: netflume reads the wire, and lanname turns an address into a hostname. Neither has dependencies of its own, so pip install nettail brings in three pure Python packages and nothing else.

TIME         EXPORTER        PROTO  SOURCE                                     DESTINATION                                 PKTS    BYTES     DUR  FLAGS
13:40:03.000 10.0.0.1        TCP    192.168.1.42:51234 (macbook-pro)         ↑ 140.82.114.4:443/https (github)               23     4.1K   4.90s  ...AP.SF
13:40:03.000 10.0.0.1        UDP    192.168.1.77:5353/mdns (hue)             ⇄ 224.0.0.251:5353/mdns                          2     180B   4.90s
13:39:56.103 10.0.0.1        TCP    10.0.1.5:44321 (nas)                     ↑ 104.244.42.1:443/https (twitter-edge)        412    57.5K  12.50s  ...AP...
13:40:08.453 10.0.0.1        TCP    1.1.1.1:853/domain-s                     ↓ 10.0.1.5:39012 (nas)                           4     320B   0.15s  ......S.

---

Contents

• Requirements
• Quick start
• Configuring the UDM Pro
• Command line options
• The status bar
• Keyboard controls
• The traffic summary
• Output format
• Hostname resolution
• JSON output
• Running as a service
• How it works
• Troubleshooting
• Tests
• Limitations
• Extending it

---

Requirements

• Python 3.9 or newer
• netflume, the wire decoder
• lanname, the hostname lookups

Neither has dependencies of its own, so this brings in three pure Python packages and nothing else.

pip install nettail

Or, from a checkout, either of:

pip install -e .        # the nettail command, pointed at the working tree
pip install lanname netflume && python -m nettail

Binding to the default port 2055 does not require root on Linux, since it is above 1024. You only need elevated privileges if you choose a port below 1024.

---

Quick start

# Listen on the default port
nettail

# Pick a port and only show flows that touch the internet
nettail --port 2055 --external-only

# Passive name resolution plus your own static mappings
nettail --resolve dns --hosts ./lan-hosts

# Dump every decoded field under each flow
nettail --verbose

# Machine readable, one object per line
nettail --json > flows.jsonl

Press Ctrl-C to stop. A summary prints on exit with datagram counts, template statistics, name resolution hit rates, and the top ten external destinations by volume.

---

Configuring the UDM Pro

In the UniFi Network application:

Settings > CyberSecure > Traffic Logging

On some firmware versions this lives under Settings > System > Integrations instead. Look for a section named NetFlow or NetFlow (IPFIX).

Setting	Value
NetFlow (IPFIX)	Enabled
Collector address	IP of the machine running this script
Collector port	2055
Sampling	Off
Networks / VLANs	Select every network you want visibility into

Sampling must be off

This matters more than anything else on the page. Sampled export throws away most flows before they leave the router. A malware beacon is a handful of small flows per hour, and at 1:1024 sampling you will never see it. Sampling is fine for bandwidth graphs and useless for security monitoring.

If your firmware does not let you disable sampling, the flow data is not trustworthy for detection work and you should look at a mirror port with Zeek instead.

You do not have to take the router's word for it. The collector reads the sampling rate an exporter advertises and says so on stderr the first time it sees one:

10.0.0.1 reports 1-in-1000 sampling. The byte and packet counts shown are a sample,
so real traffic is roughly 1000x higher. Turn sampling off at the exporter for true
counts.

The rate is repeated in a Sampling section of the exit summary. It is read from whichever form the exporter uses: samplingInterval or samplerRandomInterval on v9, samplingPacketInterval with samplingPacketSpace or samplingSize out of samplingPopulation on IPFIX, and the sampling field of the header on v5. Nothing is printed when an exporter reports no sampling, or a rate of one in one.

If an exporter later reports that sampling is off, meaning an interval of one or a selection that skips nothing, the remembered rate is dropped and a line says the counts are complete again. An option record that says nothing about sampling, such as one carrying interface names, never changes what is remembered.

Detection depends on the exporter actually sending options data. Silence is not proof that sampling is off, so check the UniFi UI as well. On v5 there are no options records at all: sampling is read from the header, and an exporter that stops sampling simply clears the field, which is reported as nothing rather than as a change.

Local traffic may never arrive

Selecting every network in the table above reads like a request for visibility into all of them. On a UDM Pro it is not what you get. Traffic to and from the internet arrives. Traffic between two local hosts may not, and the two reasons for that are worth telling apart, because only one of them is surprising.

Two hosts on the same VLAN never produce a flow record at all. They talk through a switch and the gateway routes nothing between them, so there is nothing for it to account. This is not a fault and no setting changes it. A flow exporter running on the router cannot see traffic that never reaches the router, and every tool reading NetFlow from a gateway has this property, this one included.

Two hosts on different VLANs are routed by the gateway and may still be missing. This is the surprising one. Traffic between separate subnets has to pass through the UDM Pro, and a tracert or traceroute between the hosts shows it as a hop, so the router demonstrably handles the packets. They can still be absent from the export, with every network selected.

Two mechanisms would account for that and they cannot be told apart from outside the box. The routing may be offloaded to hardware along a path the flow accounting does not sit on, or the accounting may be scoped to the internet-facing path by design. The consequence is the same either way, which is why the distinction matters less than it looks: neither this collector nor anything in the export configuration changes it.

This is behaviour observed on a UDM Pro rather than anything Ubiquiti documents, so establish it on your own hardware before concluding. Three checks, in order of effort:

1. tracert or traceroute between the two hosts. The UDM's address as a hop means it routes them, and the rest of this section applies. A switch address instead means a layer 3 switch is doing the routing and the gateway has nothing to report, which is a different problem with a different answer.
2. Insights > Flows in the UniFi Network application. Sessions listed there and absent from your export mean the data exists on the box and only the export scope is holding it back. That is the version worth raising with Ubiquiti, being a demonstrable gap rather than a suspicion.
3. This collector's own exit summary. Compare flows decoded under Summary with flows under External traffic. Two equal figures mean every flow that arrived had a public endpoint, so nothing internal is being exported at all.

If it is east-west visibility you need, a gateway is the wrong vantage point for it. Mirror the VLANs you care about to a capture host at the switch and read packets rather than flow records, which is the same advice as for sampled export and for a different reason.

Other notes

• Make sure a host firewall on the collector is not dropping inbound UDP on your chosen port. sudo ufw allow 2055/udp or the nftables equivalent.
• If flows appear with the UDM's own WAN address as the source, you are seeing post-NAT records and have lost internal host attribution. Check which networks are selected in the export configuration.

---

Command line options

usage: nettail [-h] [--version] [--bind BIND] [--port PORT] [--external-only]
               [--verbose] [--json] [--no-color] [--header-every HEADER_EVERY]
               [--sticky-header] [--hide-status] [--no-supplemental-services]
               [--size-scale-max BYTES | --size-scale-dynamic]
               [--size-scale-window FLOWS] [--resolve {off,dns,all}]
               [--hosts FILE] [--resolve-public] [--fqdn]
               [--resolve-workers RESOLVE_WORKERS]
               [--resolve-timeout RESOLVE_TIMEOUT]

General

Option	Default	Description
--version		Print the version and exit
--bind ADDR	0.0.0.0	Address to bind the UDP socket to
--port PORT	2055	UDP port to listen on
--external-only	off	Only display flows where the source or destination is a public IP. Everything is still counted in the summary
--verbose	off	Print every decoded field on an indented line under each flow. Also surfaces parse errors
--json	off	Emit one JSON object per flow on stdout instead of the table
--no-color	auto	Disable ANSI colour. Colour is also disabled automatically when stdout is not a TTY or when NO_COLOR is set
--header-every N	40	Reprint the column header every N lines. 0 disables repeats
--sticky-header	off	Pin the column header to the top row of the window. See below
--hide-status	off	Turn off the two-line status bar at the foot of the window, which is shown by default whenever output is going to a terminal. The b key toggles it while the collector runs. See The status bar
--no-supplemental-services	off	Name ports from the system services database alone. Without it, a short list shipped with this program fills in the ports the system does not know. See Service names

Sticky header

--sticky-header keeps the column header on the top row while flows scroll underneath it, so you never lose track of which column is which. It works by setting a VT100 scroll region (DECSTBM) covering every row but the first, then letting output scroll inside that region as usual.

Two things to know before turning it on:

• You lose scrollback. Most terminals discard lines that scroll out of a margin region instead of pushing them into the scrollback buffer, so you can only see what is currently on screen. If you want to scroll back through past flows, leave the flag off and stay with --header-every, or use --json and write to a file.
• It needs a real terminal. On Windows the script enables virtual terminal processing automatically, which covers Windows Terminal and modern conhost. If stdout is redirected to a file or a pipe, or the window has fewer than six rows, the flag prints a notice and falls back to --header-every.

The header is redrawn when the window is resized (the size is re-measured every 16 flow lines), and the scroll region is released on Ctrl-C so the summary and your shell prompt are not trapped inside it. --header-every is ignored while the header is pinned, since the repeats would be redundant.

Flow size colour

Option	Default	Description
--size-scale-max BYTES	100K	Top of the BYTES colour scale. Accepts a plain byte count or a K, M, G, T suffix (powers of 1024, matching the column)
--size-scale-dynamic	off	Re-range the scale to the largest flow seen so far instead of a fixed top. Mutually exclusive with --size-scale-max
--size-scale-window FLOWS	off	Scope the dynamic scale to the last N flows instead of the whole run. Implies --size-scale-dynamic, so it cannot be combined with --size-scale-max

See Size colour scale for what the colours mean.

Hostname resolution

Option	Default	Description
--resolve MODE	all	off, dns, or all. See below
--hosts FILE	none	Static mappings in /etc/hosts format. Repeatable
--resolve-public	off	Also reverse-resolve public addresses via PTR
--fqdn	off	Show nas.lan instead of nas
--resolve-workers N	4	Background lookup threads
--resolve-timeout SEC	1.0	Per-probe timeout for mDNS and NetBIOS queries

---

The status bar

Two lines along the foot of the window, holding the figures you would otherwise have to stop and ask for. It is on whenever the collector is printing to a terminal. There is no flag to turn it on, only --hide-status to turn it off, and the b key to take it away and bring it back while the collector runs.

up 04:12    pkts 3.1k 12/s   flows 12.4k 1.2k/s   rx 48.0M 9.4 Mbps   ext 61% in 28.1M out 12.9M   peak 142.0 Mbps         top 93.184.216.34 (edge) 5.4M
live        all flows        v9 tmpl 6            scale dyn 4.0M      ok                           TCP 78% 443/https 41%   names all/short 412 found 88 missed

The first row is the wire: how long the collector has been up, what has arrived and how fast it is arriving now, how much of it crossed the internet and which way, the fastest the link is known to have run, and the external address currently holding the most of it. Rates are averaged over the last five seconds rather than the whole run, so the figures say what the network is doing rather than what it has done. peak is the same floor the summary reports as the minimum link speed: a rate the link certainly reached, not an estimate of what was asked of it.

The second row is the run: whether anything is paused or filtered, which versions the exporters are speaking and how many templates have been learned, where the size colour scale is topped out, whether anything is going wrong, the leading protocol and service, and how names are being looked up and how that is going.

The middle field of that row is the one to watch. It reads ok while nothing is wrong and turns into the count of whatever is: export gaps, data sets that arrived before their template, malformed datagrams, name lookups dropped from a full queue, sampling in force. They share the one field rather than each taking their own, which is what keeps the two rows the same length. Four things going wrong at once would otherwise push the run row four fields past the wire row.

Within a field the figures are drawn plainly and everything wrapped around them is dimmed: 48.0 carries where the M after it recedes, 78 where the TCP before it does. It is the same hue either way, so the palette still means what it meant, red for loss and green for running, and it is only the weight that separates the number being read from the unit naming it. A field with no figures in it at all, live or ok, is left alone; there is nothing there to tell apart. Terminals that ignore the dim attribute simply show the field as it was before.

Reading down as well as across

Field n of the wire row and field n of the run row begin in the same column, so the bar is a grid rather than two independent lines and the eye can drop straight down it. Seven fields on each row, which is why the run row is ordered as it is: the wire row runs from a short runtime to a long address, so the run row is ordered narrowest first to match, pairing wide with wide. Ordered any other way, names all/short 412 found 88 missed would sit under up 04:12 and leave twenty-odd blank columns after it.

A column is as wide as the wider of the two fields sharing it, and that is what the alignment costs. The rows no longer each spend the window on their own contents, so between them they run out of room sooner than either would alone. The full set of fourteen fields needs about 150 columns. Below that the bar shortens, and the last column belongs to whichever row holds the wider field in it, so the other row stops short of the right margin.

Neither row ever wraps. When the window is too narrow to hold everything, whole fields are dropped rather than a line being cut mid-figure, and what goes first is whatever matters least: the peak rate, then the leading service, then the exporter versions. Anything reporting trouble outranks everything merely describing the run, so a narrow window will show you gaps 2 long after it has given up on TCP 78%. The rows are dropped from independently, so below about 150 columns they will not always hold the same number of fields; the columns they do have still line up.

The bar redraws twice a second at most, however busy the network is, and it is wiped and the margins released before the summary is printed, so the report lands on a screen that nothing is still holding on to.

Starting it scrolls the window clear rather than erasing it. Something has to make room: setting a scroll region puts the cursor back on the top row, and printing flows over whatever was already there would be worse than either alternative. So the bar pushes a windowful of blank lines up first, and what you had on screen goes into the scrollback with everything else instead of being wiped, the same courtesy the bottom margin was chosen to preserve.

What it costs, and what it does not

The bar reserves its two rows with a scroll region, the same VT100 mechanism behind --sticky-header, but it sets only the bottom margin and leaves the top of the window alone. That difference is the whole point. A terminal decides a line is worth keeping when the line leaves the top of the screen, and with a bottom margin lines still leave the top of the screen exactly as they always did. Most terminals go on feeding scrollback as usual:

Scrollback kept	Scrollback discarded
xterm, GNOME Terminal, Konsole, rxvt, Apple Terminal	kitty, iTerm2

This is the same technique apt uses to keep a progress bar below its output, and the terminals in the right-hand column are where people notice apt's output missing from their history (kitty#3113).

Windows Terminal is untested. It is not in either column above because nobody has checked, and guessing would be worse than saying so. Ten seconds settles it, in a plain terminal window rather than through a pager or a tool that captures output:

"$([char]27)[1;10r"; 1..30 | % { "line $_" }; "$([char]27)[r"

Scroll up. If line 1 through line 20 are in the history, your terminal keeps scrollback under a bottom margin and the bar costs you nothing. If they are gone, it belongs in the right-hand column, and --hide-status is how you get your history back.

With the header pinned as well

--sticky-header and the status bar compose, and turning both on gives you a window with a header nailed to the top row, flows scrolling in the middle, and the bar along the bottom. A scroll region is a single pair of margins rather than two independent settings, so the two features do not each claim one: the header writes one region covering both reservations, and the bar draws inside what it was given.

Scrollback is lost in that combination, because the top margin is set. That is already the price of --sticky-header, and the bar does not add to it. On a window with fewer than eight rows the header stands down and says so, leaving the bar and --header-every to carry on.

When it does not appear

Under --json, redirected to a file or a pipe, on a terminal that will not take a scroll region, or in a window shorter than six rows, the bar never starts and nothing is said about it. Unlike --sticky-header, which prints a notice when it cannot do what you asked for, the bar was never asked for, so its absence is not news.

---

Keyboard controls

While the collector is running it also takes single keypresses. Nothing has to be enabled: if stdout is a terminal and --json is off, the keys are live and one line under the startup banner says so:

keys: the collector takes single keypresses; press ? to list them

That is the whole of it. The line used to name all fifteen keys, which ran to two hundred characters and wrapped on any ordinary terminal, and it scrolled away with the banner regardless, so the reader who wanted it an hour later was no better off for its having been thorough. ? answers that reader instead, whenever they ask. What the line still has to say for itself is that there are keys at all: someone who does not already know the program answers the keyboard has no reason to press anything, ? included.

Key	What it does
esc	Close the program. The exit summary prints as it would on Ctrl-C
space	Pause and resume printing. Flows still arrive and are still counted while paused; they queue up and print when you resume
x	Clear the screen. While paused it also throws away the queue
s	Print the traffic summary now, without stopping
l	List the local addresses seen this session and the names they answered to
c	Clear the collected statistics and restart the runtime clock
b	Hide the status bar, or bring it back. See The status bar
d	Toggle re-ranging of the size colour scale
m	Ask for a new fixed top for the size colour scale, and switch to it
h	Cycle host name resolution: off, dns, all
n	Show a host by its name in place of its address, where a name is known
p	Show hardware (MAC) addresses on a line under the flow
f	Toggle full domain names
e	Toggle showing only flows with a public endpoint
?	List every key and what it does, without stopping

Every key prints one line saying what changed, so there is no guessing about which mode you are now in. The exceptions are s, l and ?, whose output is its own confirmation: it prints exactly what the program prints on the way out, as a snapshot of the moment it was asked for, and the collector keeps running. Press it as often as you like; press c first if you want the next one to cover only what happens from now on.

b gives the two bottom rows back to the flows and takes them again on the next press. Turning it off releases the scroll region; turning it back on scrolls up only the two rows it is about to cover, so nothing already on screen is painted over. In a window with no room for both the bar and a pinned --sticky-header, the header keeps it and b says so rather than displacing what you asked for.

n swaps the address for the name, rather than printing the name after it: 192.168.1.42:51234 (macbook-pro) becomes macbook-pro:51234. A host that has answered to nothing keeps its address, so a column under n is a mixture of the two, and deliberately so: hiding the machines nothing is known about behind a blank would hide exactly the ones worth noticing. It only affects rows printed from then on, the same bargain h and f strike, and it says so if nothing is being looked up at all.

p puts the two hardware addresses on a second line, sitting directly under the addresses they belong to. Only exporters that send the MAC elements have anything to show: NetFlow v5 has no field for them, and plenty of v9 exporters leave them out. Where a flow carries none the line is not printed at all rather than printed empty, so turning p on costs nothing on an exporter that cannot answer. Where only one end is known the other reads -.

l lists every local address that has answered to a name at any point in the session, not what happens to be cached, since names expire and the cache evicts, and the useful question hours later is still "what did you see". Where an address has answered to more than one name they share a row, most recent first, with the superseded ones dimmed:

Local hosts seen
  192.168.1.5        tv
  192.168.1.20       nas  nas-old

Under --no-color a superseded name is marked with a trailing * instead, and the footer says so. The list holds 5000 addresses and five names each; past that the least recently seen are dropped.

? prints the whole list, a key and a sentence a line, and changes nothing:

Keyboard controls
  space  pause and resume printing, holding flows meanwhile
      x  clear the screen, and the held flows with it while paused
      s  print the traffic summary now, without stopping
      l  list the local addresses seen, and their names
      c  clear the statistics and restart the runtime clock
      b  hide the status bar at the foot of the window, or bring it back
      d  re-range the size colour scale as flows arrive, or pin it
      m  ask for a new fixed top for the size colour scale
      h  cycle host name resolution: off, dns, all
      n  show a host by its name in place of its address
      p  show hardware addresses on a line under each flow
      f  show full domain names instead of the first label
      e  show only flows with a public endpoint, or show all
      ?  this list
    esc  close the program, printing the exit summary

The listing and the dispatch that runs the keys are built from one table in keys.py, and the suite holds the two to each other. A key that works and is listed nowhere is as much a defect as one that is listed and does nothing, and neither is the sort of thing anyone notices until they go looking for a key that is not there. The key ? itself is a constant that the table, the dispatch and the reminder line all take it from, so the line cannot come to point at a key that is not the one that answers.

Like s and l it goes to stderr, so a run with stdout redirected into a file answers on the terminal where the question was asked rather than dropping a listing into the middle of the flows.

What the keys do not do

space holds at most 2000 flows. Past that the oldest are dropped and the count is reported when you resume. Pausing is for reading what is on screen, not for recording. Decoding never stops, so the summary and the top talkers table are unaffected by how long you pause.

c clears the datagram, flow, template and export-gap counters, the top talkers table, the name resolution counters, and the runtime clock. It deliberately leaves the learned templates alone, along with the sequence positions each exporter has reached, and the sampling rates, which are facts about the exporter rather than statistics. Resetting the sequence positions would make every exporter look as though it had restarted.

d honours whatever --size-scale-window was set to, so re-ranging is over the last N flows if a window was given and over the whole run otherwise. Turning it off returns the scale to its previous fixed top rather than to the default. m accepts the same K, M, G suffixes as --size-scale-max; escape cancels, and anything unparseable leaves the scale as it was.

h and f both affect what gets looked up from that moment on. Switching to dns or all from off starts the lookup threads, which a collector started with --resolve off does not have. Toggling f empties the name cache, because every name in it was already shortened or not on the way in.

Names appear as new flows arrive rather than all at once: rows already on screen are not revisited, and an address that failed to resolve during an earlier dns period stays uncached-as-missing for its 300 second negative TTL, so it may take that long to try again. Switching back to off stops new lookups but leaves the worker threads idling; they are daemon threads and end with the program.

When the keys are off

Keys need a terminal on stdin. Under --json, redirected into a file, or run from systemd, key handling never starts and the collector behaves exactly as it did before, with no reminder line and no terminal mode changes. The terminal is put into cbreak mode, not raw, so Ctrl-C still interrupts, and it is restored on exit alongside the scroll region the status bar and the sticky header share.

One consequence worth knowing: with keys live the socket wait drops from one second to a quarter, so that a keypress on a silent network is answered promptly rather than up to a second later.

---

The traffic summary

Runtime is reported as hh:mm:ss, and the hours are not wrapped at a day: a collector left running for a week says 170:24:03 rather than starting again at midnight. The status bar quotes the same clock in its up field, without the leading hours until there are some.

Printed on the way out, and on demand with the s key. It describes every flow that was decoded, whether or not it was displayed, so --external-only narrows the screen without narrowing the report.

Summary
  runtime            01:00:00
  datagrams received 61
  bytes received     40.0K
  flows decoded      6
  templates learned  3
  option records     2

Protocols
                      bytes    flows    packets
  TCP                 26.1M        4      21.5k
  UDP                  9.6K        2         82

Services
                      bytes    flows
  445/microsoft-ds    20.0M        1
  443/https            5.2M        2
  22/ssh             878.9K        1
  53/domain            9.6K        2

Busiest 5 pairs by volume
  192.168.1.13 <-> 192.168.1.20                                  20.0M
  192.168.1.10 (laptop) <-> 93.184.216.34                         5.2M
  140.82.121.4 <-> 192.168.1.12 (buildbox)                      878.9K

Busiest 5 pairs by packets
  140.82.121.4 <-> 192.168.1.12 (buildbox)                       17.0k
  192.168.1.10 (laptop) <-> 93.184.216.34                         4.1k
  192.168.1.13 <-> 192.168.1.20                                    400

Longest 5 flows
    1h00m  TCP    192.168.1.12:51004 (buildbox) -> 140.82.121.4:22            878.9K
     8.0s  TCP    192.168.1.13:51005 -> 192.168.1.20:445                       20.0M
     3.0s  TCP    192.168.1.10:51000 (laptop) -> 93.184.216.34:443              5.1M

External traffic
  total              6.1M
  inbound            0B
  outbound           6.1M
  flows              5
  minimum link speed 14.4 Mbps
  concurrent demand  14.6 Mbps  if every flow sent evenly

Name resolution
  names found        4 (dns 1, mdns 2, netbios 1)
  unresolved         2

Top external addresses by bytes
  93.184.216.34                                          5.2M
  140.82.121.4                                         878.9K
  9.9.9.9                                                4.9K

Protocols and services. A flow is filed under whichever of its two ports has a name, destination first, since that is the one being connected to in the ordinary case. The number is always shown even when the name is known, as in 443/https or 53/domain, because a name is a convention and the number is the fact, and the number is what you reach for when writing a firewall rule or searching a capture. Two ephemeral ports have no name between them, so those read 51002/tcp, and a flow with no ports at all is filed under its protocol.

Pairs. Every table that names an address shows its hostname beside it where one is known, so 192.168.1.10 (laptop) <-> 93.184.216.34. A row too long for its column is trimmed with ... rather than allowed to wrap.

Direction is collapsed: a conversation is one row whichever end opened it. Both tables are over every flow, internal ones included, which is usually what you want when the question is "what is talking to what".

Only the busiest handful is ever reported, so the tables do not hold every conversation a long run has ever seen: past 50,000 distinct pairs, addresses or services the rarest are dropped and the report says how many. What survives is whatever ranks highest by either measure, so the rows shown are unaffected.

Longest flows are ranked by the duration the exporter reported. A flow with no usable start and end is not in the running, which mostly means v5 exporters with a wrapped uptime counter.

External traffic means every flow with at least one public endpoint, the same definition --external-only uses, down to the same code: the display, the filter and the summary all ask one helper where a flow's two ends are, so an exporter that reports only post-NAT addresses is treated the same way by all three. Inbound is what arrived from a public address and outbound is what left for one; a flow between two public addresses is counted in both directions rather than assigned to one.

Minimum link speed, and concurrent demand

The last two lines are the interesting ones, and the easiest to misread. They answer different questions and only one of them is a bound.

Minimum link speed is a floor in the strict sense: the link cannot have been slower. Two things are true without assuming anything about how a flow spread its bytes. First, a flow delivered all of its bytes inside its own lifetime, so the link reached at least that flow's average at some instant within it. Second, flows that began and ended inside the same second delivered all of their bytes during that second, so those add up. The larger of the two is reported.

Concurrent demand is an estimate, not a bound. Every external flow is spread evenly across its own lifetime and the rates are laid on a timeline; the tallest point is the answer. It describes the shape of the traffic and is usually the more interesting number, but it cannot be claimed as a minimum: two flows whose lifetimes overlap need not have been sending at the same instant. A flow of 1000 bytes across [0s, 10s] and another across [9s, 19s] look like 1.6 kbps of overlap, yet each could have been sent in its own nine second half, needing only 889 bps and never overlapping at all.

Neither number is a speed test. Real traffic is burstier than an even spread, so the true peak is higher than both, often much higher for short flows. A quiet network produces small numbers because nothing demanded more, not because the link cannot do more.

Flows with no duration contribute to neither, since they say nothing about how long anything took; if none of the flows were timed, the line says so rather than claiming zero. On a very busy run the concurrent estimate is built from the first 50,000 timed external flows and says so. The floor is unaffected by that cap.

Colour

Nothing in the report is left in the terminal's plain text, because a wall of white is the hardest thing on the page to read. Every element says what it is:

Element	Colour
Section headings	bold blue
Labels, column headers, notes, punctuation	grey
Counts: flows, packets, datagrams, durations	cyan
Byte figures	the size ramp, see below
A public address	cyan
An address on this network	blue
The arrow between two addresses	magenta
A hostname	green
A port number	cyan, its service name green
Protocols	the colours they have in the flow display
Warnings and losses	yellow and red, as elsewhere

The addresses follow the distinction the flow display already draws, so a row tells you at a glance which end of a conversation is out on the internet. The arrow between them is punctuation rather than data, and gets a colour of its own so it does not read as part of either address.

Byte figures are painted along the same cool-to-hot ramp the BYTES column uses, but ranged differently. The flow display needs a scale that means the same thing from one line to the next, so it uses a fixed or slowly moving top. A report is read all at once, and the useful question is which of these figures is large compared with the others in front of you, so the ramp is stretched over exactly the values being printed, smallest to largest, and a figure's colour places it among its neighbours rather than against any absolute idea of large. Only the rows actually shown are ranged over, so the smallest figure on screen is the one at the cold end even where rarer ones were counted but not printed.

Nothing is always the cold end: a zero sits at the bottom of the ramp, and a report whose every figure is zero is painted entirely cold, which is what a run that carried nothing should look like. Equal figures share the middle of the ramp only when there is something there to be equal about. Counts of flows and packets are left alone; the ramp is about volume.

Under --no-color, NO_COLOR, or a redirected stdout the report contains no escapes at all.

---

Output format

TIME         EXPORTER        PROTO  SOURCE                                     DESTINATION                                 PKTS    BYTES     DUR  FLAGS
13:40:03.000 10.0.0.1        TCP    192.168.1.42:51234 (macbook-pro)         ↑ 140.82.114.4:443/https (github)               23     4.1K   4.90s  ...AP.SF
13:40:03.000 10.0.0.1        UDP    192.168.1.77:5353/mdns (hue)             ⇄ 224.0.0.251:5353/mdns                          2     180B   4.90s
13:39:56.103 10.0.0.1        TCP    10.0.1.5:44321 (nas)                     ↑ 104.244.42.1:443/https (twitter-edge)        412    57.5K  12.50s  ...AP...
13:40:08.453 10.0.0.1        TCP    1.1.1.1:853/domain-s                     ↓ 10.0.1.5:39012 (nas)                           4     320B   0.15s  ......S.

Column	Meaning
TIME	Flow start time in local time, to the millisecond. Not the time the record was received
EXPORTER	Source address of the device that sent the flow record
PROTO	IP protocol name, or the raw number for anything uncommon
SOURCE / DESTINATION	ip:port/service (hostname), e.g. 104.18.32.7:443/https (cloudflare). The well known service name follows the port it describes; parentheses always hold the resolved hostname. Either annotation is omitted when unknown, and the service is dropped before the hostname when the column is tight. The n key shows the name in place of the address instead
(unnamed)	Which way the flow crossed the boundary: ↓ in from the internet, ↑ out to it, ⇄ between two addresses on this network. See below
PKTS	Packet count, abbreviated above 1000
BYTES	Byte count, abbreviated with binary units
DUR	Flow duration in seconds
FLAGS	Union of TCP flags seen during the flow. Blank for non-TCP

Which way it went

The unnamed column between the two endpoints says which side of the router each end sat on, which is usually the first thing worth knowing about a row.

Arrow	Meaning
↓	A public address to a local one: something arriving from the internet
↑	A local address to a public one: something leaving for the internet
⇄	Both ends local: a conversation that never left the network
blank	Neither, or not enough to say: two public addresses, or an end that could not be read

This is the way round your router's own dashboard draws it, where a download points down, and the way round a network diagram is drawn, with the internet above and everything here below it. Read the arrow as pointing at where the flow went: ↑ is something heading out, ↓ is something coming down off the internet to a machine here.

Multicast and link-local addresses count as local. A flow to 224.0.0.251 never went near the internet whatever else is true of the address, and the arrow is only ever about which side of the boundary each end was on. Anything that fits none of the three gets a blank rather than a guess: an arrow pointing the wrong way would be worse than no arrow.

Both internet arrows are drawn in the same colour as a public address elsewhere in the display, and the local one is dimmed, so a screen of ⇄ stays quiet and an ↑ or ↓ stands out of it.

The local mark is a stacked pair rather than a single ↔ for a practical reason. One left-right arrow has to fit two heads and a shaft across a single cell, and a console that gives it no more width than a letter renders it as a smudge. Stacking two arrows spreads the same detail down the cell instead, where there is room, which is why ↑ and ↓ read cleanly at any width, and why ⇄ does too.

Service names

The name after a port, 443/https and 5353/mdns, comes from the system services database: /etc/services on Linux and macOS, services under System32\drivers\etc on Windows. Those files are not the same from one machine to the next. A Linux box names port 5353 and a Windows box does not, so the same capture reads 5353/mdns on one and a bare 5353 on the other, which is a poor thing for a column whose whole job is to say what a port is.

So a short list ships beside the program, in nettail/supplemental-services, and is consulted when the system database has nothing to say and only then. A machine that already names a port keeps its own answer, and the list can only ever fill a gap. It holds mDNS, LLMNR, SSDP, DNS over TLS, CoAP, MQTT and the NetBIOS trio, in the format /etc/services uses:

mdns            5353/udp     # multicast DNS, what Apple and Linux answer to
llmnr           5355/udp     # link-local name resolution, Windows' own

Edit it to add your own. A line that cannot be read is skipped rather than treated as an error, so a typo costs one name and not the whole file. Ports at or above 49152 are never looked up in it, for the same reason the system database is not asked about them: that range is ephemeral, and a name there would describe whichever port the kernel handed a client rather than a service.

--no-supplemental-services ignores the list entirely and leaves the system database as the only source. If the file has been deleted or cannot be read, the collector says so once at startup and carries on with the system database, which costs a handful of ports their names and nothing else.

A file that opens but yields no entries at all is reported the same way, and is the case the message really exists for: one unreadable line goes quietly, but a file where every line fails that way has lost the whole list while looking from the outside exactly like one that worked. Saving it as UTF-16 rather than UTF-8 does that to every line at once, so save it as UTF-8.

TCP flag string

Eight fixed positions, high bit to low bit. A dot means the flag was not set.

C E U A P R S F
│ │ │ │ │ │ │ └── FIN
│ │ │ │ │ │ └──── SYN
│ │ │ │ │ └────── RST
│ │ │ │ └──────── PSH
│ │ │ └────────── ACK
│ │ └──────────── URG
│ └────────────── ECE
└──────────────── CWR

...AP.SF is a complete, normally closed connection. ......S. on its own with a low packet count is a connection attempt that never completed, which is what a port scan or a dead C2 server looks like.

Colour

Element	Colour
Destination is a public IP	cyan
Destination is private	dim
Destination is multicast	grey
TCP / UDP / ICMP	green / yellow / magenta
Flow size (BYTES column)	muted blue through green to dusty red, see below

Size colour scale

The BYTES column is tinted along a cool-to-hot ramp so flow size reads at a glance: slate blue for the smallest flows, through teal and green, into khaki, sand and a dusty red at the top of the scale.

Every step is picked from the muted part of the 256-colour cube, none at full saturation, none with a channel turned off or pushed to the top. The rest of the output is drawn in the terminal's own sixteen colours, which take their tone from whatever theme is in use, and a ramp of primaries beside them looks like something that wandered in from another program. These carry the same weight: enough separation to rank a column at a glance, without any one figure shouting. The same ramp does both jobs, so the live display and the report agree.

Byte counts span several orders of magnitude, so position on the ramp is logarithmic: each step is a constant multiple of bytes, not a constant number of them. The bottom of the ramp is fixed at 64 bytes, below the size of a bare ACK, so the interesting range is not squashed into the top few colours. Anything at or above the top of the scale is red; nothing overflows.

With the default 100K top:

Flow size	Colour
up to 64B	blue
256B	sky blue
1K	teal
1.5K	green
4K	lime
10K	yellow
32K	orange
64K	orange-red
100K and up	red

Two ways to set the top of the scale, and they cannot be combined:

• --size-scale-max BYTES moves the fixed top. Use this when you want colours to mean the same thing across runs, or when you know roughly what a large flow looks like on your network. --size-scale-max 1M spreads the ramp over a wider range and leaves everyday flows cooler.
• --size-scale-dynamic re-ranges the scale as it runs: the largest flow seen so far always lands on red, and everything else is coloured relative to it. Every decoded flow counts, including ones hidden by --external-only. Colours therefore shift over the life of the run, and the same size may be a different colour before and after a big flow arrives. The scale never shrinks, and it starts at 4K so a capture of nothing but tiny flows does not run hot immediately.

Scoping the dynamic scale to recent flows

A run-long dynamic scale has one weakness: a single large transfer pins the top of the ramp for the rest of the session, and everything after it stays cool even when the traffic picks up again. --size-scale-window N fixes that by ranging the scale over only the last N flows:

nettail --size-scale-window 500

The top of the scale is then the largest flow among the most recent 500, and it falls again once that flow ages out, so the colours track what the traffic is doing now rather than what it did an hour ago. Every decoded flow counts toward the window, including ones --external-only hides. The 4K minimum still applies, so a quiet stretch does not paint tiny flows red.

Pick N for the timescale you care about: a few hundred flows on a busy link is a short recent-history window, while several thousand behaves closer to run-long. --size-scale-window implies --size-scale-dynamic, so passing both is allowed but redundant; passing it with --size-scale-max is an error, since a fixed scale has nothing to re-range.

The window maximum is maintained in a monotonic deque, so the cost per flow is constant regardless of how large N is.

Colour is dropped entirely under --no-color, when NO_COLOR is set, or when stdout is not a TTY. The ramp uses 256-colour escapes, which every current terminal supports, Windows Terminal included.

Export gaps

Every export message carries a sequence counter, and a jump in it means messages went missing on the way here. Without watching it the loss is silent: a flow that never arrives looks exactly like a flow that never happened. Once an exporter's counter has been read for long enough to be trusted (see below for when that is), the exit summary reports either way:

  export gaps        none

or, when exports have gone astray:

Export gaps
  10.0.0.1           240 flow records never arrived

Neither line appears for an exporter whose counter could not be read unambiguously, because nothing is being claimed about it in either direction.

An exporter can run several observation domains, and each is an independent sequence space, so they are counted separately rather than added together. The domain and version are named when an exporter has lost exports on more than one:

Export gaps
  10.0.0.1 v9 domain 7   40 data records never arrived
  10.0.0.1 v9 domain 0   2 export messages never arrived

The first gap for an exporter is also reported while running, since the useful time to know is while it is still happening. Usual causes are a saturated link between the router and the collector, or this collector not keeping up: the receive loop is single threaded, and a socket buffer that fills drops datagrams silently.

What the counter counts differs by version: v5 counts flow records, IPFIX counts data records, and v9 is specified to count export packets but is widely built to count records instead. Rather than trust the version, each exporter is watched until one reading lands exactly on the next message, and that becomes the rule for that exporter. Until one does, nothing is reported. A wrong rule would invent a loss on every message, and a collector that cries wolf about dropped flows is worse than one that stays quiet. An exporter sending a single record per message is ambiguous and is watched without ever being judged.

Repeated or reordered datagrams are counted separately and are not losses. So is a counter restart, which is what an exporter reboot looks like.

Timestamps

Flow start time is derived in this order of preference:

1. flowStartMilliseconds and friends (IPFIX elements 150 to 157), which are absolute epoch times
2. first_switched (v5 and v9), which is milliseconds since the exporter booted. The absolute time is reconstructed from the header's sysUptime and unix_secs

The reconstruction is rejected and the export time substituted if the result lands more than a day from now, which guards against the uptime counter wrapping at 49.7 days.

---

Hostname resolution

All lookups run in background worker threads behind a TTL cache. The packet receive loop only ever reads the cache and never blocks. UDP has no backpressure, so anything that stalls that loop silently drops flows.

Practical consequence: the first flow involving a new address prints a bare IP. Later flows print the name once a worker has found it. Static mappings from --hosts are the exception, since they need no network round trip and appear immediately.

Sources, first hit wins

Order	Source	Catches	Sends packets?
1	--hosts static file	Whatever you put in it	No
2	Reverse DNS (PTR)	Devices with DHCP hostnames registered by the UDM	Only to your resolver
3	mDNS reverse query to 224.0.0.251:5353	Apple and Linux devices	Yes, to the LAN
4	NetBIOS node status, udp/137	Windows machines, network printers	Yes, to the host

The mDNS query sets the QU (unicast response) bit so the collector does not have to join the multicast group. The NetBIOS parser picks the unique workstation name (suffix 0x00 with the group bit clear) rather than the workgroup name.

Choosing a mode

--resolve all     # PTR, then mDNS, then NetBIOS. Best hit rate. Default.
--resolve dns     # PTR only. Fully passive from the LAN's point of view.
--resolve off     # Nothing looked up. --hosts entries still apply.

all is the default because on most home networks PTR alone resolves almost nothing, and a resolution feature that silently finds no names is worse than not having one.

That said, this is a security monitoring tool, and a collector that generates its own traffic shows up in its own data. If that matters to you, use --resolve dns and put the devices you care about in a --hosts file. That combination probes nothing and is deterministic. The startup banner always states which mode is active.

Static hosts file

Standard /etc/hosts syntax. First name on the line wins, aliases are ignored, # comments are stripped.

# lan-hosts
192.168.1.1     udm-pro
192.168.1.42    macbook-pro.lan     mbp
192.168.1.77    living-room-appletv
192.168.10.20   ring-doorbell
10.0.1.5        nas.lan

nettail --hosts ./lan-hosts --hosts /etc/hosts

Caching

Result	TTL
Name found	3600 s
No name found	300 s

The cache holds 50,000 addresses. When it is full the least recently used entry is dropped, one at a time, and the total is reported as cache evictions in the exit summary. Dropping the oldest matters: flushing the whole cache would send every active host back through resolution at the same moment, which under --resolve all means a burst of mDNS and NetBIOS probes onto the LAN.

The lookup queue holds 4096 pending addresses; overflow is counted as lookups dropped in the exit summary rather than blocking.

---

JSON output

--json writes one object per line to stdout, flushed immediately, suitable for piping into another process.

nettail --json | ./ioc_match.py
nettail --json | jq -c 'select(.dst_port == 443)'

Field names follow the normalised names in the IE table, so v5, v9, and IPFIX all produce the same keys where the underlying data is equivalent. Three metadata keys are added with a leading underscore:

Key	Meaning
_exporter	Source IP of the exporting device
_version	5, 9, or 10
_timestamp	Flow start as a unix float

src_host and dst_host are present only when a hostname is known, so their absence is normal and not a schema change.

Example:

{"src_addr":"10.0.1.5","dst_addr":"104.244.42.1","src_port":44321,"dst_port":443,
 "proto":6,"tcp_flags":24,"packets":412,"octets":58900,
 "flow_start_ms":1787230327192,"flow_end_ms":1787230339692,"in_if":1,"out_if":2,
 "_exporter":"10.0.0.1","_version":10,"_timestamp":1787230327.192,"src_host":"nas"}

Unrecognised information elements are preserved rather than dropped. Standard elements with no entry in the IE table appear as ie<id>, and enterprise-specific elements appear as e<enterprise>.<id>.

---

Running as a service

SIGTERM is handled the same as Ctrl-C, so the exit summary still prints when systemd stops the unit.

# /etc/systemd/system/nettail.service
[Unit]
Description=NetFlow collector
After=network-online.target

[Service]
Type=simple
User=netflow
ExecStart=/opt/netflow/venv/bin/nettail \
    --port 2055 \
    --resolve dns \
    --hosts /opt/netflow/lan-hosts \
    --json
StandardOutput=append:/var/log/netflow/flows.jsonl
StandardError=journal
Restart=always
RestartSec=5

[Install]
WantedBy=multi-user.target

sudo systemctl daemon-reload
sudo systemctl enable --now nettail
journalctl -u nettail -f

Rotate the output with logrotate using copytruncate, since the script holds the file descriptor open.

---

How it works

Protocol support

Version	Header	Templates	Notes
NetFlow v5	24 bytes	none, fixed 48-byte records	Fully decoded on the first packet
NetFlow v9	20 bytes	FlowSet 0 (data), 1 (options)	Templates cached per exporter and source ID
IPFIX / v10	16 bytes	Set 2 (data), 3 (options)	Enterprise fields and variable-length encoding supported

Templates are keyed by (exporter address, observation domain, template ID). Different exporters can reuse the same template IDs for different layouts, so the key has to include all three.

IPFIX variable-length fields are handled: a declared length of 0xFFFF means the value is prefixed by a one-byte length, or by 0xFF followed by a two-byte length for values 255 bytes or longer.

Options templates are parsed and stored even though their contents are not currently interpreted. This is necessary so that options data sets can be walked without desyncing the parser mid-message.

Layout

Reading the wire is not part of this repository any more, and neither is finding out what a machine is called. Decoding v5, v9 and IPFIX, the template store behind them, sequence gaps and advertised sampling rates live in netflume; hostname discovery and its cache live in lanname. Both were lifted out of this program and released on their own. What is left here is the console: the part that decides what a flow should look like on a terminal.

It comes from	What lives there
netflume	decoding v5, v9 and IPFIX, and the templates behind them
netflume	information element definitions, shared by all three versions
netflume	what a field is: address kind, protocol, flags, and the system's own service names
netflume	the sampling rate an exporter advertises, and gaps in its sequence numbers
lanname	hostname discovery over reverse DNS, mDNS and NetBIOS, and its cache

The nettail command installed by the package is a console script pointed at cli.main; python -m nettail reaches the same function through __main__.py, which is how a checkout runs it and how the test suite starts subprocesses. Everything else is the package:

Module	What lives there
__main__.py	what python -m nettail runs
colour.py	ANSI codes and the switch that disables them
values.py	sizes, rates and durations, written for a column
sizescale.py	the colour ramp behind the BYTES column
services.py	port names, the system database first and a shipped list after
display.py	laying one flow out as a line of text
sticky.py	pinning the column header to the top of the window
statusbar.py	the two-line bar along the foot of the window
cli.py	argument parsing, the receive loop, and the exit summary
tally.py	the running totals behind the traffic summary
keys.py	reading keypresses, and what each one does

Dependencies run one way, from cli down towards colour and values, so there are no import cycles. nettail/__init__.py re-exports the public names, which is what makes from nettail import SizeScale work wherever the class actually lives. Nothing from either dependency is re-exported: a program that wants the decoder should import netflume, and one that wants the resolver should import lanname, and get the version it pinned rather than whichever one this package happens to be sitting on.

cli.py owns the socket and hands each datagram to a netflume.Decoder, which returns a message and says nothing. netflume prints nothing at all, by design, so the running warnings about sampling and lost exports are raised there as objects and turned into text here, in report_events. lanname is the same way about an unreadable hosts file, which is why that warning is worded here too.

Robustness

A malformed or truncated datagram increments parse_errors and is discarded. The listener keeps running. Set lengths, record lengths, and DNS compression pointer loops are all bounds-checked.

---

Troubleshooting

Nothing appears at all

Confirm packets are arriving before suspecting the parser:

sudo tcpdump -ni any udp port 2055

If tcpdump is silent, the problem is the exporter configuration, routing, or a firewall, not this script.

Nothing appears for the first few minutes

Expected with v9 and IPFIX. Exporters resend templates on their own schedule, typically every 60 to 600 seconds, and data records that arrive before their template cannot be decoded. Those are counted as data sets with no template in the exit summary. Wait.

If that counter keeps climbing after ten minutes, the exporter is sending data for a template it is not retransmitting, or template datagrams are being dropped in transit.

Only some flows show up

Three possibilities. The exit summary names the first two outright, and the third is what is left when neither of them appears.

Sampling, if a Sampling section appears or a warning was printed while running. See Configuring the UDM Pro.

Export loss, if an Export gaps section appears. Exports left the router and never reached the decoder. See Export gaps.

Never exported, if neither section appears and what is missing is local traffic. Nothing was lost, because nothing was sent: the router may not export flows between local hosts at all, whether or not it routes them. See Local traffic may never arrive.

Hostnames never resolve

Try each source in isolation:

# Is PTR working at all?
dig -x 192.168.1.42

# Does the device answer mDNS?
avahi-resolve -a 192.168.1.42

# Does it answer NetBIOS?
nmblookup -A 192.168.1.42

If all three come back empty, the device genuinely does not advertise a name and a static --hosts entry is the only option. Check the Name resolution block in the exit summary to see which sources are producing hits.

unsupported_version climbing

Something is sending non-NetFlow traffic to the port, or the exporter is configured for sFlow. sFlow is a different protocol and is not supported.

High CPU

Reduce --resolve-workers, or switch to --resolve dns or --resolve off. On a busy link, --json piped to a separate process is cheaper than rendering the coloured table.

---

Tests

python tests/run.py               # every suite
python tests/run.py tally keys    # only suites whose name contains either
python tests/run.py -v            # print every check, not only failures

756 checks across 24 suites, in about eight seconds. No test dependencies and no test runner to learn: the suites need only netflume and lanname, the same as the collector.

They cover this program and not its decoder. How a gap is spotted, how a template is stored and how a sampling rate is read are netflume's questions and netflume's suites answer them, as name resolution and its cache are lanname's; what is checked here is everything downstream of that, including the two places a gap or a sampling rate is put into words.

Each suite is a plain script that runs top to bottom, prints a line per check and exits non-zero if any failed:

PASS  a skipped message is reported
PASS  and attributed to the stream
FAIL  counted in data records  got 'export messages'

That shape suits what these tests mostly do, which is build state up over a sequence of steps and assert along the way. tests/harness.py holds the little they share: check, finish, a colour stripper, and a stream that claims to be a terminal.

tests/run.py gives each suite its own process. That is not fussiness: several of them replace socket.socket, shutil.get_terminal_size or the keyboard for their duration, and sharing an interpreter would let one suite's fakes decide another suite's result.

What is covered

Suite	What it holds
test_tally	breakdowns, busiest pairs, longest flows, and the link speed floor against a brute-force sweep
test_sequence_gaps	learning how each exporter counts, and telling loss from reordering and restarts
test_options_records	options data kept out of the flow display, sampling rates read from every form exporters use
test_keys, test_keys_end_to_end	every keyboard control, and scripted keys driven through the real receive loop
test_key_help	the ? listing, the table and the dispatch agreeing, and the reminder line pointing at a key that answers
test_size_scale, test_size_window, test_size_observe	the BYTES colour ramp, its sliding window, and what it ranges against
test_sticky_header, test_sticky_resize, test_sticky_shutdown	the scroll region, what a resize does to it, and giving the terminal back
test_status_lines, test_status_bar, test_status_shutdown	what the bar says at every width, the rows it claims, and the two features sharing one scroll region
test_flow_display	the direction arrow, names in place of addresses, and the mac line sitting under the columns it belongs to
test_hosts_and_gradient	the local host list, and the report ramp spanning the rows it prints
test_summary_key	the traffic summary printed on demand, and the clock it is dated by
test_sticky_with_gradient	the pinned header and the size ramp sharing one screen
test_services	the supplemental port names, the parser behind them, the system database keeping precedence, and the ephemeral floor pinned to where netflume actually puts it
test_endpoints, test_top_talkers	one definition of a flow's ends, both directions counted
test_version	--version, and the package, pyproject and changelog agreeing about the number

Nothing reaches the network except test_size_end_to_end, which starts a real collector on the loopback interface, waits to be told the socket is bound, and sends it NetFlow v5 datagrams. Everything else drives the code in process with synthetic packets, which is also the honest limitation: the exporters are imaginary, and how the colours actually look still needs a human and a terminal.

---

Limitations

• No sFlow. Different protocol, different wire format.
• No IPv6 transport. The collector socket is AF_INET. IPv6 addresses inside flow records are decoded fine, but the exporter has to reach the collector over IPv4.
• Single-threaded receive. Fine for a home or small office link. Under heavy load the right change is to move the socket read into its own thread feeding a bounded queue.
• No persistence. Everything is in memory and lost on exit. Use --json and redirect if you want history.
• No IOC matching. By design. See below.
• Options data is read for sampling only. Other exporter metadata carried in options records, such as interface names and application ID mappings, is decoded but not displayed.
• Flow data is 5-tuple only. No SNI, no JA3, no DNS names, no payload. If you need those, NetFlow is the wrong data source and a mirror port with Zeek is the right one.

---

Extending it

The --json mode exists so that matching, enrichment, and alerting can live in a separate process. Keeping them out of the receive loop is deliberate, not laziness: a blocking feed lookup in the hot path drops flows silently.

A reasonable next stage:

nettail --json | python3 ioc_match.py

where ioc_match.py holds threat intel indicators in a radix trie (feeds ship CIDRs, so a hash set is the wrong structure), deduplicates on (src_addr, dst_addr, dst_port) with a TTL cache, and tiers its sources by confidence rather than treating them all equally.

Useful starting points for feeds, roughly in descending order of signal quality:

• abuse.ch Feodo Tracker, active botnet C2
• abuse.ch ThreatFox, filtered to confidence 75 and above
• Spamhaus DROP, hijacked and criminal-controlled netblocks
• Emerging Threats compromised-ips.txt

Log-only rather than alert-worthy: FireHOL levels 2 and 3, and any scanner or brute-force list. Those are inbound-attacker lists, and an outbound match usually means you hit shared hosting.

Behavioural signals available from flow data are generally better value than IP reputation lookups, since most modern malware C2 rides infrastructure that will never appear on a blocklist. Worth building, in rough order of yield:

1. Beaconing. Connection interval periodicity with jitter tolerance
2. Never-before-seen destination ASN for a given internal host
3. Long-lived low-volume connections, the classic tunnel signature
4. Upload/download ratio inversion on a host that normally only downloads

---

License

Do what you want with it.