Nilan Connect

An event-driven Python client for Nilan ventilation units behind a Nilan gateway, over the gateway's local micro_nabto protocol, built on modbus_event_connect.

You subscribe to the values you care about and are told when one changes - with its quality, so "offline", "no reading" and a real value never look alike.

Supported controllers

Other controllers behind a Nilan or Genvex gateway follow. Until then, connect() raises UnsupportedDeviceError for them.

Installation

pip install nilan-connect

Everything you use comes from nilan_connect: the client and its values, the errors, discovery, and, in nilan_connect.testing, a simulated gateway for your own tests. modbus_event_connect is installed with it; nothing needs importing from it.

Usage

import asyncio
from nilan_connect import PointKey, create_client

def on_change(key, old, new):
    print(f"{key}: {new.value} ({new.quality.name})")

async def main():
    # The email is the account the gateway is paired with in Nilan's app.
    client = create_client("you@example.com", host="<gateway-ip>")
    await client.connect()              # reads the handshake and chooses the controller's model

    client.subscribe(PointKey.TEMP_OUTSIDE, on_change)
    client.subscribe(PointKey.FILTER_OK, on_change)

    while True:                         # you own the clock; the library owns the plan
        await client.poll()             # reads only what is due - free when nothing is
        await asyncio.sleep(1)

asyncio.run(main())

With only a device_id, the gateway is found by discovery. discover() lists the gateways that answer. port reaches a gateway that does not answer on micro_nabto's standard port.

How often values are read

The controller's readings every 10 seconds, its settings every 180 seconds, and a setting again one second after it is written.

Writing

await client.write(PointKey.TEMP_TARGET, 21.5)
await client.write(PointKey.FILTER_REPLACE_RESET, True)   # an action: nothing to read back

A value outside the limits Nilan's manual gives is refused before anything is sent. create_client(..., read_only=True) refuses every write.

Keys

A key is the stable name of a point, and carries the type of its value. A key string never changes, so what a consumer builds on it keeps working.

CTS400 (IR = input register, read as a datapoint; HR = holding register, read and written as a setpoint):

filter_ok is the manual's "filter change status" the other way round, and humidity_high_active its "average level humidity 24 hours OK" the other way round.

Documentation

docs/models holds the manufacturers' manuals for every controller, with every register extracted to CSV.

A note to Nilan

Thank you for publishing the Modbus descriptions of your controllers, and for gateways that answer on their owner's own network. They are what lets an owner fit a Nilan unit into a home the way they want it.

We know a gateway can be updated remotely, and that its local access could be closed. Please keep it open. A local connection needs the email the gateway is paired with in your app, and it reaches the same values your Modbus descriptions give anyone who wires to the controller directly: it adds nothing Modbus does not already allow, and it makes your gateway worth more to the people who own one.

Disclaimer

Not affiliated with Nilan or Genvex. Use at your own risk; no warranty.

License

MIT. See LICENSE.