nomad-camels-driver-demo-source-measure-unit 0.1.7

This packes provides everything to run a demo instrument for CAMELS

NOMAD CAMELS driver for a demo source measure unit

Simulated demo source measure unit for testing, written for the measurement software NOMAD CAMELS.

Features

This driver can be used to get familiar with the functionalities of NOMAD CAMELS without using an actual instrument / setup.

It is usually used together with the demo digital multimeter.

Both these drivers can communicate with each other.

Two options for this demo are available, that both simulate a semiconductor element on a peltier heater element.

• diode_on_heater: A diode on this heater.
• semiconductor_resistor_on_heater: A simple semiconductor piece on the heater.

This instruments simulates a two-channels source measure unit which is connected as follows:\

• Channel 1 mesI1, mesV1, setI1, setV1 is connected to the investigated sample (diode or resistor).
• The second channel is connected to the peltier heater and is easiest controlled by using setI2, the temperature can be read as a resistance with the demo digital mutlimeter.

Documentation

For more information and documentation visit the NOMAD CAMELS documentation.