noren

日本語

noren sends selected files from one Git repository to another as a single commit; it does not publish packages to a registry.

Use it, for example, to send a public snapshot of a private repository to GitHub. The destination receives the selected files, the commit message you supply, and the configured author and committer. Source commits, their messages, and annotated-tag messages are not copied. File paths and file contents that you select are copied.

Install and choose how to run

You need Python 3.12 or later, Git, and uv. Run commands inside the source Git repository.

Add noren as a development dependency of your Python project:

uv add --dev noren
uv run noren --help

Alternatively, uvx runs noren in an isolated environment without adding it to your project's dependencies:

uvx noren --help

The examples below use uv run noren. If you chose uvx, replace that prefix with uvx noren. If noren is already available in your environment, you can use noren directly. noren init and noren publish work without interactive input.

Initial setup

The source repository must have an origin remote. Create a separate destination repository on GitHub and make sure your usual Git authentication can read it and push to it. noren uses https://github.com/OWNER/REPO.git, with your existing Git configuration.

uv run noren init

noren init takes no arguments and creates noren.yaml and noren-words.txt at the source repository root, even when run from a subdirectory. It prints setup instructions, exits with 0 on success, and reports errors to stderr with a nonzero exit code. It refuses to overwrite either file and creates neither file if origin is missing.

Configure noren.yaml

Edit the generated template. This example sends README.md, LICENSE, and files under src/, except src/internal/. Replace OWNER/public-project with your destination:

destination: OWNER/public-project
include: |
  README.md
  LICENSE
  src/
exclude: |
  src/internal/
  private/
  tests/
  .github/
  .nf/
  .gitignore
  pyproject.toml
  uv.lock
  noren.yaml
  noren-words.txt
word-list: noren-words.txt
author:
  name: Release Bot
  email: release@example.invalid

Key	What to write
destination	The destination's GitHub OWNER/REPO, rather than a URL. The source repository itself is rejected.
include	Files to send, as a multiline string in .gitignore syntax.
exclude	Files to leave out, in the same syntax. If both lists match a file, exclude wins.
word-list	The forbidden-word file's path, relative to the repository root. The file must be inside the repository.
author	Optional name and email. Both the destination commit's author and committer use these values. Replace the example identity with yours.

Every file in the selected source commit's tree must match include or exclude; a file in neither list stops the command. These lists classify tracked files in that commit, not untracked files in the working directory. Each list follows Git's .gitignore rules, including # comments, ! negation, /-anchored paths, and **. Within a list, later matching rules take precedence. A negated child pattern cannot bring back a file while its parent directory remains excluded.

Keep the configuration and forbidden-word file in exclude, and add rules for any other tracked files in your repository. If you change word-list, update its exclusion too. All four required keys must be present; an explicitly empty include or exclude string is allowed, but every file still needs classification.

If you omit author, noren uses the authenticated GitHub CLI account when gh is available: its name (or username if the name is empty) and ID+USERNAME@users.noreply.github.com. If that account cannot be obtained, noren stops and asks you to configure author.name and author.email. gh is optional and only supplies this default identity; push authentication comes from Git.

For SSH authentication, you can configure Git to rewrite the GitHub HTTPS URLs inside this source repository:

git config --local url."git@github.com:".insteadOf https://github.com/

Configure noren-words.txt

Write one forbidden word or phrase per line. The generated file already contains the source origin URL and its repository name. Keep those entries and add identifiers or text that must not appear in selected file contents. For example, with origin set to git@github.com:OWNER/source-private.git:

git@github.com:OWNER/source-private.git
source-private
internal-project
private@example.invalid

The list must contain at least one nonblank line. Every nonblank line is an entry, including a line beginning with #; the word list has no comment syntax. noren compares substrings after Unicode NFKC normalization and case folding, so case and full-width forms also match. Bytes that cannot be decoded as UTF-8 are replaced for the inspection. The files are sent with their original bytes.

Commit the settings before selecting a tag or commit ID

noren reads the selected files, noren.yaml, and the word list from the commit named by --tag or --commit. Changes in the working directory or later commits do not affect that commit's check or publication.

Commit the source files you intend to send, then commit the settings:

git add noren.yaml noren-words.txt
git commit -m "Configure noren"

Use --tag when you want to put the same tag name on the destination:

git tag v1.0.0

For changes that do not increase the version, such as correcting a README, use --commit to send without creating a destination tag. Obtain the source commit ID with git rev-parse HEAD, then pass the printed ID to --commit. Only hexadecimal commit IDs and unique abbreviations are accepted; HEAD, branch names, tag names, nonexistent IDs, and ambiguous abbreviations stop the command.

If you correct settings or file contents after a failed check, commit the correction and choose a tag or commit ID that contains it before checking again.

Keep the settings out of packages you build

noren.yaml and the word list are committed to the source repository, and the word list names the private identifiers you want to keep in. noren never sends them unless you include them, but other tools that package the source repository can. For example, a Python sdist built from the source checkout includes every tracked file by default, so publishing it to PyPI would publish the word list.

Build packages from the destination repository, which holds only the selected files, or exclude the settings in the packaging tool. With hatchling:

[tool.hatch.build.targets.sdist]
exclude = ["/noren.yaml", "/noren-words.txt"]

Check the contents of built packages before publishing them.

Check before sending

noren publish defaults to dry-run. Exactly one of --tag or --commit is required; providing both or neither stops the command. --message is also required, even for a check. For the first publication, when the destination has no main branch:

uv run noren publish --tag v1.0.0 --message "Release v1.0.0" --initial

For a tag containing only README.md and src/app.py among the included files, a successful first check prints:

tag: v1.0.0
source_commit: 0123456789abcdef0123456789abcdef01234567
destination: OWNER/public-project
files:
- README.md
- src/app.py
destination_main_before: null
commit: null
pushed: false

Check source_commit, destination, and every path in files. Dry-run creates no destination commit and updates no destination branches or tags, but it reads the destination's references, so Git access is needed. It also resolves the author identity. A successful dry-run does not guarantee permission to push.

The command exits with 0 if the check succeeds. It exits with a nonzero code and writes the reason to stderr if, for example, a file is in neither list, selected contents contain a forbidden word, a required setting or a nonempty word list is missing, or the destination cannot be read. Unclassified-file errors list paths; forbidden-word errors identify the file and line. Selected submodules must be excluded; symlinks are inspected using their link target text and sent as symlinks.

Use --initial only when destination main is absent, for both dry-run and push, with either source selector. noren stops if --initial is given and main already exists, or if --initial is omitted and main does not exist. With --tag, an existing destination tag of the requested name also stops publication.

Send the checked files

Add --push to the command you checked:

uv run noren publish --tag v1.0.0 --message "Release v1.0.0" --initial --push

The first publication creates a commit with no parent. Each later publication adds one commit whose only parent is the destination's previous main tip. Its tree contains exactly the selected source files; files absent from the selection are absent from the new destination tree. With --tag, noren updates destination main and a tag with the source tag's name together in one atomic push, without force. The destination tag points directly to the new commit, even if the source tag is annotated. With --commit, noren updates only destination main and creates no tag.

For a later source tag, omit --initial:

uv run noren publish --tag v1.1.0 --message "Release v1.1.0"
uv run noren publish --tag v1.1.0 --message "Release v1.1.0" --push

To send a README correction without a tag, replace the example ID below with your source commit ID. Check and send the same ID:

uv run noren publish --commit a1b2c3d --message "Correct the README"
uv run noren publish --commit a1b2c3d --message "Correct the README" --push

Add --initial to both commands if destination main does not exist yet. With --commit, the result has tag: null and source_commit contains the full ID even when you supplied an abbreviation.

Choose a destination commit message appropriate for the files you are sending. noren uses that message instead of the source commit messages.

Verify the result

noren publish writes one YAML document to stdout on success and failure. Save this document and stderr, and check the exit code. To save the output of the later push above, use this form in place of that push command:

uv run noren publish --tag v1.1.0 --message "Release v1.1.0" --push > /tmp/noren-result.yaml 2> /tmp/noren-error.txt

Key	Meaning
tag	The requested source tag name; null with --commit, or an empty string if no selector is available.
source_commit	The full ID of the source commit read for publication; null if the command stopped before resolving it.
destination	The destination OWNER/REPO; an empty string if unavailable.
files	The selected file paths as a YAML list, possibly empty. This list alone does not indicate a successful check or push.
destination_main_before	The destination's main commit ID read before sending. null means the destination was read and main was absent; '' means that value could not be obtained.
commit	The created destination commit ID. null for dry-run or a failure before creating a commit.
pushed	true when Git reported that destination main and, with --tag, the requested tag were updated; false for dry-run or when the command could not confirm a successful push.

A successful push exits with 0 and has pushed: true and a non-null commit. The ID is the destination commit's ID, not the source commit's ID.

If a push fails or its result is uncertain and commit is non-null, keep that ID and destination_main_before. pushed: false by itself cannot establish whether the remote received the update. Read the destination references, replacing the example repository and tag with those in your result:

git ls-remote --refs https://github.com/OWNER/public-project.git refs/heads/main refs/tags/v1.1.0

If both references show the printed commit ID, the update is present. If main has advanced since then, a matching tag still identifies the published snapshot; check the destination history to confirm that commit is an ancestor of the current main. If main still equals destination_main_before and the tag is absent, the update is not present at the time of the check. If the references differ otherwise, inspect the destination history before deciding what to do. A failed ls-remote does not establish whether the push succeeded. Do not infer the result from the exit code alone or blindly repeat the initial command: existing main or an existing tag will stop it.

When tag is null, read only main:

git ls-remote --refs https://github.com/OWNER/public-project.git refs/heads/main

If main equals the printed destination commit, the update is present. If main has advanced, inspect the destination history to confirm that commit is an ancestor of the current main. If main still equals destination_main_before, the update is not present at the time of the check. Resolve an uncertain result before repeating the command; commit publication has no destination tag to prevent sending the same snapshot again.

Command help

uv run noren --help
uv run noren init --help
uv run noren publish --help

Command help is in English. This README covers setup, checks, sending, and verification. Your project's version changes, builds, and publication to package registries belong to its own release instructions.