nornir-srl

This module provides a Nornir connection plugin for Nokia SRLinux devices. It uses the gNMI management interface of SRLinux to fetch state and push configurations and the PyGNMI Python module to interact with gNMI.

Rather than limiting the connection plugin to primitives like open_connection, close_connection, get, set, etc, this module provides also methods to get information from the device for common resources. Since the device model tends to change between releases, it was considered a better approach to provide this functionality as part of the connection plugin and hide complexity of model changes to the user or Nornir tasks.

In addition to the connection plugin, there is a set of Nornir tasks that use the connection plugin to perform common operations on the device, like get BGP peers, get MAC table, get subinterfaces, etc. These Nornir tasks are called by a command-line interface fcli that provides a network-wide CLI to perform show commands across an entire set or subset for SRLinux nodes.

Note: The current functionality is focused on a read-only network-wide CLI to perform show commands across an entire set or subset for SRLinux nodes, as defined in the Nornir inventory and through command-line filter options. It shows output in a tabular format for easy reading. Following versions may focus on configuration management and command execution on the nodes.

Quickstart

Prerequisites

• have Containerlab installed
• have a running containerlab topology with SRLinux nodes
• Internet access to pull the nornir-srl container image

Create a shell alias for fcli

• go to the directory where your containerlab topology file is located
• create an alias for fcli as follows and modify the CLAB_TOPO to match your topology file name
• modify the --network option to match your containerlab network name (default is the name of the lab)
• latest version of nornir-srl container image is here. Modify the tag accordingly if you want to use a different version

CLAB_TOPO=topo.yaml && alias fcli="docker run -it --network $(grep '^name:' $CLAB_TOPO | awk '{print $2}') --rm -v /etc/hosts:/etc/hosts:ro -v ${PWD}/${CLAB_TOPO}:/topo.yml ghcr.io/srl-labs/nornir-srl:latest -t /topo.yml"

Running fcli without additional arguments will start an interactive shell inside the container.

Run fcli

❯ fcli --help
Usage: fcli [OPTIONS] COMMAND [ARGS]...

Options:
  -c, --cfg PATH         Nornir config file. Mutually exclusive with -t
                         [default: nornir_config.yaml]
  -i, --inv-filter TEXT  inventory filter, e.g. -i site=lab -i role=leaf.
                         Possible filter-fields are defined in inventory.
                         Multiple filters are ANDed
  -b, --box-type TEXT    box type of printed table, e.g. -b
                         minimal_double_head. 'python -m rich.box' for options
  -t, --topo-file PATH   CLAB topology file, e.g. -t topo.yaml. Mutually
                         exclusive with -c
  --cert-file PATH       CLAB certificate file, e.g. -c ca-root.pem
  --version              Show the version and exit.
  --help                 Show this message and exit.

Commands:
  bgp-peers     Displays BGP Peers and their status
  bgp-rib       Displays BGP RIB
  ipv4-rib      Displays IPv4 RIB entries, LPM lookup
  lldp          Displays LLDP Neighbors
  mac           Displays MAC Table
  ni            Displays Network Instances and interfaces
  subif         Displays Sub-Interfaces of nodes
  sys-info      Displays System Info of nodes
  tunnel-table  Displays the IP tunnel-table (LDP, SR-ISIS, VXLAN, ...)

Installation

Docker-based installation

This is the easiest way to get started. It requires Docker and optionally Containerlab to be installed on your system.

NOTE: if you have issues connecting to the docker network of containerlab from the nornir-srl container that uses the standard bridge docker0, make sure proper iptables rules are in place to permit traffic between different Docker networks, which is by default blocked. For example, on Ubuntu 20.04, you can use the following command:

iptables -I DOCKER-USER -o docker0 -j ACCEPT -m comment --comment "allow inter-network comms"

Alternatively, you can attach the nornir-srl container to the containerlab network to avoid adding iptables rules (cf. aliases below).

To run fcli, create an alias in your shell session. For example, assuming you're using containerlab and you have a clab_topo.yml file in your current directory and lab is up and running:

CLAB_TOPO=clab_topo.yml && alias fcli="docker run -it --network $(grep '^name:' $CLAB_TOPO | awk '{print $2}') --rm -v /etc/hosts:/etc/hosts:ro -v ${PWD}/${CLAB_TOPO}:/topo.yml ghcr.io/srl-labs/nornir-srl:0.2.1 -t /topo.yml"

Running fcli without additional arguments will start an interactive shell inside the container.

This command assumes that the containerlab topology file is named clab_topo.yml and is in the current directory. If not, change the CLAB_TOPO variable accordingly. Also, it assumes that the containerlab topology is using the default containerlab docker-network naming, i.e. name of the lab. If you have overridden the management network with .mgmt.network in the topology file, change the --network option accordingly.

Python-based installation with uv (recommended)

uv is a standalone Python package manager. Install uv and then install nornir-srl directly from GitHub:

# On Linux and macOS
curl -LsSf https://astral.sh/uv/install.sh | sh
uv tool install git+https://github.com/srl-labs/nornir-srl

After this you can simply run fcli or fcli-mcp:

fcli --help
fcli-mcp --help

Note: Ensure your shell's PATH includes the directory where uv or pip installs binaries (typically ~/.local/bin on Linux/macOS).

Python-based installation with pip

Create a Python virtual-env using your favorite workflow, For example:

mkdir nornir-srl && cd nornir-srl
python3 -m venv .venv
source .venv/bin/activate

Following command will install the the nornir-srl module and all its dependencies, including Nornir core.

pip install wheel
pip install -U nornir-srl

Nornir-based inventory mode

In this mode, a Nornir configuration file must be provided with the -c option. The Nornir inventory is polulated by the InventoryPlugin and associated options as specified in the config file. See below for an example with the included YAMLInventory plugin and the associated inventory files. This mode is typically used for real hardware-based fabric.

Create the Nornir confguration file, for example:

# nornir_config.yaml
inventory:
    #    plugin: SimpleInventory
    plugin: YAMLInventory
    options:
        host_file: "./inventory/hosts.yaml"
        group_file: "./inventory/groups.yaml"
        defaults_file: "./inventory/defaults.yaml"
runner:
    plugin: threaded
    options:
        num_workers: 20

Create the inventory files as referenced in the above configuration file, for example:

## hosts.yaml
clab-4l2s-l1:
    hostname: clab-4l2s-l1
    groups: [srl, fabric, leafs]
clab-4l2s-l2:
    hostname: clab-4l2s-l2
    groups: [srl, fabric, leafs]
clab-4l2s-s1:
    hostname: clab-4l2s-s1
    groups: [srl, fabric, spines]

## groups.yaml
global:
    data:
        domain: clab
srl:
    connection_options:
        srlinux:
            port: 57400
            username: admin
            password: admin
            extras:
                path_cert: "./root-ca.pem"
spines:
    groups: [ global ]
    data:
        role: spine
        type: ixr-d3
leafs:
    groups: [ global ]
    data:
        role: leaf
        type: ixr-d2

The root certificate is specified once for all devices in group srl via the connection_options.srlinux.extras.path_cert parameter.

CLAB-based inventory mode

In this mode, the Nornir inventory is populated by a containerlab topology file and no further configuration files are needed. The containerlab topo file is specified with the -t option.

fcli converts the topology file to a hosts and groups file and only nodes of kind=srl are populated in the host inventory. Furthermore, the prefix parameter in the topo file is considered to generate the hostnames. The presence of labels in the topo file is mapped into node-specific attribs that can be used in inventory filters (-i option).

Usage

fcli supports a set of reports that can be run against a set of SRLinux nodes. The set of nodes is defined by the Nornir inventory and optionally filtered by the -i option.

❯ fcli
Usage: fcli [OPTIONS] COMMAND [ARGS]...

Options:
  -c, --cfg PATH         Nornir config file. Mutually exclusive with -t
                         [default: nornir_config.yaml]
  -i, --inv-filter TEXT  inventory filter, e.g. -i site=lab -i role=leaf.
                         Possible filter-fields are defined in inventory.
                         Multiple filters are ANDed
  -b, --box-type TEXT    box type of printed table, e.g. -b
                         minimal_double_head. 'python -m rich.box' for options
  -t, --topo-file PATH   CLAB topology file, e.g. -t topo.yaml. Mutually
                         exclusive with -c
  --cert-file PATH       CLAB certificate file, e.g. -c ca-root.pem
  --version              Show the version and exit.
  --help                 Show this message and exit.

Commands:
  bgp-peers     Displays BGP Peers and their status
  bgp-rib       Displays BGP RIB
  ipv4-rib      Displays IPv4 RIB entries, LPM lookup
  lldp          Displays LLDP Neighbors
  mac           Displays MAC Table
  ni            Displays Network Instances and interfaces
  subif         Displays Sub-Interfaces of nodes
  sys-info      Displays System Info of nodes
  tunnel-table  Displays the IP tunnel-table (LDP, SR-ISIS, VXLAN, ...)

To run a specific report, use the corresponding command, e.g. fcli mac to display the MAC table of all nodes in the inventory. The output is a table with columns relevant to the report.

❯ fcli -b ascii mac
                                                              MAC Table                                                              
+-----------------------------------------------------------------------------------------------------------------------------------+
| Node            | NI          | Address           | Dest                                                  | Type                  |
|-----------------+-------------+-------------------+-------------------------------------------------------+-----------------------|
| clab-4l2s-l1    | macvrf-202  | 00:00:5E:00:01:01 | irb                                                   | irb-interface-anycast |
|                 |             | 1A:B4:09:FF:00:42 | vxlan-interface:vxlan1.202 vtep:192.168.255.2 vni:202 | evpn-static           |
|                 |             | 1A:B9:08:FF:00:42 | irb                                                   | irb-interface         |
|                 |             | 1A:DC:0E:FF:00:41 | lag1.1                                                | evpn                  |
|                 | macvrf-203  | 1A:B9:08:FF:00:42 | irb                                                   | irb-interface         |
|-----------------+-------------+-------------------+-------------------------------------------------------+-----------------------|
| clab-4l2s-l2    | macvrf-202  | 00:00:5E:00:01:01 | irb                                                   | irb-interface-anycast |
|                 |             | 1A:B4:09:FF:00:42 | irb                                                   | irb-interface         |
|                 |             | 1A:B9:08:FF:00:42 | vxlan-interface:vxlan1.202 vtep:192.168.255.1 vni:202 | evpn-static           |
|                 |             | 1A:DC:0E:FF:00:41 | lag1.1                                                | learnt                |
|-----------------+-------------+-------------------+-------------------------------------------------------+-----------------------|
| clab-4l2s-l4    | macvrf-201  | 1A:3B:0B:FF:00:41 | irb                                                   | irb-interface         |
|-----------------+-------------+-------------------+-------------------------------------------------------+-----------------------|
| clab-4l2s-tor12 | macvrf-9998 | 00:00:5E:00:01:01 | lag1.1                                                | learnt                |
|                 |             | 1A:DC:0E:FF:00:41 | irb                                                   | irb-interface         |
|                 | macvrf-9999 | 1A:DC:0E:FF:00:41 | irb                                                   | irb-interface         |
+-----------------------------------------------------------------------------------------------------------------------------------+

Some reports have additional options. You can get help on the options with the --help option after the report name, e.g. fcli bgp-rib --help:

❯ fcli bgp-rib --help
Usage: fcli bgp-rib [OPTIONS]

  Displays BGP RIB

Options:
  -f, --field-filter TEXT       filter fields with <field-name>=<regex-
                                pattern>, e.g. -f state=up -f
                                admin_state="ena.*". Fieldnames correspond to
                                column names of a report
  -r, --route-fam TEXT          evpn | ipv4 | ipv6 | l3vpn-v4 | l3vpn-v6 (IP-VPN
                                unicast; full names l3vpn-ipv4-unicast /
                                l3vpn-ipv6-unicast also accepted)  [required]
  -t, --route-type [1|2|3|4|5]  Route type for EVPN routes
  --help                        Show this message and exit.

Filtering

Optionally, you can specify filters to control the output. There are 2 types of filters:

• inventory filters, specified with the global -i option, filter on the inventory, e.g. -i hostname=clab-4l2s-l1 or -i role=leaf based on inventory data
• field filters, specified with the report-specific -f option. This filters based on the fields shown in the report and a regex pattern, e.g. -f state="esta.*". Multiple field filters can be specified by repeated -f options
• report-specific options are options specific to a report, if applicable. Currently, the only report that needs extra arguments is 'bgp-rib', i.e. route_fam=evpn|ipv4|ipv6|l3vpn-v4|l3vpn-v6 (or the long l3vpn-*-unicast names) and route_type=1|2|3|4|5 for EVPN only. The latter relates to EVPN route-types and is optional. Defaults to '2' (mac-ip-routes).

Examples

mac-table

Find all MAC entries on all leafs in mac-vrf macvrf-202 that matches the pattern 1A:DC

fcli -i role=leaf mac -f NI=macvrf-202 -f Address="1A:DC:*"

                             MAC Table                             
     Fields filter:{'NI': 'macvrf-202', 'Address': '1A:DC:*'}      
                 Inventory filter:{'role': 'leaf'}                 
+-----------------------------------------------------------------+
| Node         | NI         | Address           | Dest   | Type   |
|--------------+------------+-------------------+--------+--------|
| clab-4l2s-l1 | macvrf-202 | 1A:DC:0E:FF:00:41 | lag1.1 | evpn   |
|--------------+------------+-------------------+--------+--------|
| clab-4l2s-l2 | macvrf-202 | 1A:DC:0E:FF:00:41 | lag1.1 | learnt |
+-----------------------------------------------------------------+

bgp-peers

Show all BGP peers on all nodes that are in state active:

fcli bgp-peers -f state=active

                                                                  BGP Peers                                                                   
                                                      Fields filter:{'state': 'active'}                                                       
+---------------------------------------------------------------------------------------------------------------------------------------------------------+
|              |           |                 | U4    | U6    | EVPN  | VPNv4 | VPNv6 |               |         |               |          |         |        |
|              |           |                 | R/A/T | R/A/T | R/A/T | R/A/T | R/A/T |               |         |               |          |         |        |
| Node         | NI        | 1_peer          |       |       |       |       |       | export_policy | group   | import_policy | local_as | peer_as | state  |
|--------------+-----------+-----------------+-------+-------+-------+-------+-------+---------------+---------+---------------+----------+---------+--------|
| clab-4l2s-l4 | ipvrf-200 | 10.200.4.100    | disabled | -        | disabled | -        | -        | v200-out      | clients |               | 6848     | 65534   | active |
|--------------+-----------+-----------------+----------+----------+----------+----------+----------+---------------+---------+---------------+----------+---------+--------|
| clab-4l2s-s1 | default   | 192.168.0.225   | disabled | -        | disabled | -        | -        | pass-all      | dcgw    | pass-all      | 65100    | 65200   | active |
|              |           | 192.168.255.201 | disabled | -        | 0/0/0    | -        | -        | pass-evpn     | overlay | pass-evpn     | 100      | 100     | active |
+---------------------------------------------------------------------------------------------------------------------------------------------------------+

Column headers use two lines in the live table (AFI label, then R/A/T). U4 / U6 = IPv4/IPv6 unicast, EVPN, VPNv4 / VPNv6 = L3VPN address families (values are received / active / sent, disabled, down, or -). JSON/YAML/CSV keys collapse the newline to a single space.

ipv4-rib

Show all IPv4 routes on all nodes across all network-instances that matches address 192.168.0.7 with LPM (longest-prefix-match):

fcli ipv4-rib -a 192.168.0.7

                                       IPv4 RIB - hunting for 192.168.0.7                                       
+--------------------------------------------------------------------------------------------------------------+
| Node         | NI      | Act | Prefix         | itf                | metric | next-hop        | pref | type  |
|--------------+---------+-----+----------------+--------------------+--------+-----------------+------+-------|
| clab-4l2s-l1 | default | Yes | 192.168.0.6/31 |                    | 0      | ['192.168.0.0'] | 170  | bgp   |
|              | mgmt    | Yes | 0.0.0.0/0      | ['mgmt0.0']        | 0      | ['172.20.21.1'] | 5    | dhcp  |
|--------------+---------+-----+----------------+--------------------+--------+-----------------+------+-------|
| clab-4l2s-l2 | default | Yes | 192.168.0.6/31 |                    | 0      | ['192.168.0.2'] | 170  | bgp   |
|              | mgmt    | Yes | 0.0.0.0/0      | ['mgmt0.0']        | 0      | ['172.20.21.1'] | 5    | dhcp  |
|--------------+---------+-----+----------------+--------------------+--------+-----------------+------+-------|
| clab-4l2s-l3 | default | Yes | 192.168.0.6/31 |                    | 0      | ['192.168.0.4'] | 170  | bgp   |
|              | mgmt    | Yes | 0.0.0.0/0      | ['mgmt0.0']        | 0      | ['172.20.21.1'] | 5    | dhcp  |
|--------------+---------+-----+----------------+--------------------+--------+-----------------+------+-------|
| clab-4l2s-l4 | default | Yes | 192.168.0.7/32 |                    | 0      | [None]          | 0    | host  |
|              | mgmt    | Yes | 0.0.0.0/0      | ['mgmt0.0']        | 0      | ['172.20.21.1'] | 5    | dhcp  |
|--------------+---------+-----+----------------+--------------------+--------+-----------------+------+-------|
| clab-4l2s-s1 | default | Yes | 192.168.0.6/31 | ['ethernet-1/4.0'] | 0      | ['192.168.0.6'] | 0    | local |
|              | mgmt    | Yes | 0.0.0.0/0      | ['mgmt0.0']        | 0      | ['172.20.21.1'] | 5    | dhcp  |
|--------------+---------+-----+----------------+--------------------+--------+-----------------+------+-------|
| clab-4l2s-s2 | mgmt    | Yes | 0.0.0.0/0      | ['mgmt0.0']        | 0      | ['172.20.21.1'] | 5    | dhcp  |
+--------------------------------------------------------------------------------------------------------------+

bgp-rib

Show all active BGP routes with AF=ipv4 that are active and used for prefix 192.168.255.4/32:

fcli bgp-rib -r ipv4 -f Pfx="192.168.255.4/32" -f 0_st="u*>"

                                                        BGP RIB - IPV4                                                         
                                   Fields filter:{'Pfx': '192.168.255.4/32', '0_st': 'u*>'}                                    
+-----------------------------------------------------------------------------------------------------------------------------+
| Node         | NI      | 0_st | Pfx              | as-path          | communities | lpref | med | neighbor    | next-hop    |
|--------------+---------+------+------------------+------------------+-------------+-------+-----+-------------+-------------|
| clab-4l2s-l1 | default | u*>  | 192.168.255.4/32 | [65100, 65004] i |             | 100   | 0   | 192.168.0.0 | 192.168.0.0 |
|              |         | u*>  | 192.168.255.4/32 | [65100, 65004] i |             | 100   | 0   | 192.168.1.0 | 192.168.1.0 |
|--------------+---------+------+------------------+------------------+-------------+-------+-----+-------------+-------------|
| clab-4l2s-l2 | default | u*>  | 192.168.255.4/32 | [65100, 65004] i |             | 100   | 0   | 192.168.0.2 | 192.168.0.2 |
|              |         | u*>  | 192.168.255.4/32 | [65100, 65004] i |             | 100   | 0   | 192.168.1.2 | 192.168.1.2 |
|--------------+---------+------+------------------+------------------+-------------+-------+-----+-------------+-------------|
| clab-4l2s-l3 | default | u*>  | 192.168.255.4/32 | [65100, 65004] i |             | 100   | 0   | 192.168.0.4 | 192.168.0.4 |
|              |         | u*>  | 192.168.255.4/32 | [65100, 65004] i |             | 100   | 0   | 192.168.1.4 | 192.168.1.4 |
|--------------+---------+------+------------------+------------------+-------------+-------+-----+-------------+-------------|
| clab-4l2s-l4 | default | u*>  | 192.168.255.4/32 | i                |             | 100   | 0   | 0.0.0.0     | 0.0.0.0     |
|--------------+---------+------+------------------+------------------+-------------+-------+-----+-------------+-------------|
| clab-4l2s-s1 | default | u*>  | 192.168.255.4/32 | [65004] i        |             | 100   | 0   | 192.168.0.7 | 192.168.0.7 |
|--------------+---------+------+------------------+------------------+-------------+-------+-----+-------------+-------------|
| clab-4l2s-s2 | default | u*>  | 192.168.255.4/32 | [65004] i        |             | 100   | 0   | 192.168.1.7 | 192.168.1.7 |
+-----------------------------------------------------------------------------------------------------------------------------+

Show all EVPN RT=2 routes for MAC address that starts with "1A:DC":

fcli bgp-rib -r evpn -t 2 -f MAC="1A:DC:*"

                                                                           BGP RIB - EVPN route-type 2                                                                            
                                                                         Fields filter:{'MAC': '1A:DC*'}                                                                          
+--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| Node         | NI      | 0_st | ESI                           | IP          | MAC               | RD                | as-path | next-hop      | origin | peer            | vni |
|--------------+---------+------+-------------------------------+-------------+-------------------+-------------------+---------+---------------+--------+-----------------+-----|
| clab-4l2s-l1 | default | u*>  | 01:24:24:24:24:24:24:00:00:01 | 0.0.0.0     | 1A:DC:0E:FF:00:41 | 192.168.255.2:202 | i       | 192.168.255.2 | igp    | 192.168.255.101 | 202 |
|              |         | *    | 01:24:24:24:24:24:24:00:00:01 | 0.0.0.0     | 1A:DC:0E:FF:00:41 | 192.168.255.2:202 | i       | 192.168.255.2 | igp    | 192.168.255.102 | 202 |
|              |         | u*>  | 01:24:24:24:24:24:24:00:00:01 | 10.200.1.10 | 1A:DC:0E:FF:00:41 | 192.168.255.2:202 | i       | 192.168.255.2 | igp    | 192.168.255.101 | 202 |
|              |         | *    | 01:24:24:24:24:24:24:00:00:01 | 10.200.1.10 | 1A:DC:0E:FF:00:41 | 192.168.255.2:202 | i       | 192.168.255.2 | igp    | 192.168.255.102 | 202 |
|--------------+---------+------+-------------------------------+-------------+-------------------+-------------------+---------+---------------+--------+-----------------+-----|
| clab-4l2s-s1 | default | *>   | 01:24:24:24:24:24:24:00:00:01 | 0.0.0.0     | 1A:DC:0E:FF:00:41 | 192.168.255.2:202 | i       | 192.168.255.2 | igp    | 192.168.255.2   | 202 |
|              |         | *>   | 01:24:24:24:24:24:24:00:00:01 | 10.200.1.10 | 1A:DC:0E:FF:00:41 | 192.168.255.2:202 | i       | 192.168.255.2 | igp    | 192.168.255.2   | 202 |
|--------------+---------+------+-------------------------------+-------------+-------------------+-------------------+---------+---------------+--------+-----------------+-----|
| clab-4l2s-s2 | default | *>   | 01:24:24:24:24:24:24:00:00:01 | 0.0.0.0     | 1A:DC:0E:FF:00:41 | 192.168.255.2:202 | i       | 192.168.255.2 | igp    | 192.168.255.2   | 202 |
| clab-4l2s-s2 | default | *>   | 01:24:24:24:24:24:24:00:00:01 | 10.200.1.10 | 1A:DC:0E:FF:00:41 | 192.168.255.2:202 | i       | 192.168.255.2 | igp    | 192.168.255.2   | 202 |
+--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+

VPN-IPv4 / VPN-IPv6 BGP RIB (per network-instance) use RD and Pfx columns instead of a single Prefix field:

fcli bgp-rib -r l3vpn-v4 -f Pfx="10.*"
fcli bgp-rib -r l3vpn-v6 (same as -r l3vpn-ipv6-unicast)

Nodes that do not expose the L3VPN RIB gNMI path (for example EVPN-only leaves) contribute no rows for that family instead of failing the whole report.

bgp-rib path attributes

The bgp-rib table shows a curated set of priority fields so it stays readable. Non-table output (-o json, -o yaml, -o csv) and the MCP tool automatically include the full set of path attributes for each route: standard communities, Site-of-Origin (soo), BGP domain-path (dpath), tunnel-encap extended-community, route-target (RT), as-path, route status (valid/best/used), tie-break reason and internal-tags. Use --detail/-d to also include these columns in the table output.

fcli -o json bgp-rib -r evpn -t 5            # full attributes (json)
fcli -d bgp-rib -r evpn -t 5                 # full attributes in the table too

tunnel-table

Show the IP tunnel-table with the resolved egress interface, next-hop and pushed MPLS label-stack. Useful to verify which transport (LDP, SR-ISIS, RSVP, VXLAN, ...) a remote endpoint is reached over, and on which port.

fcli tunnel-table -f type=ldp

                                     Tunnel Table
+-----------------------------------------------------------------------------------------+
| Node  | NI      | Prefix          | type | owner   | pref | metric | next-hop     | egress-itf        | label   |
|-------+---------+-----------------+------+---------+------+--------+--------------+-------------------+---------|
| dcgw1 | default | 192.0.2.152/32  | ldp  | ldp_mgr | 9    | 10     | ['10.255.0.1'] | ['ethernet-1/5.0'] | ['20000'] |
+-----------------------------------------------------------------------------------------+

Web server with live tables

fcli server serves the same reports as a web UI, kept up to date by gNMI subscriptions instead of one-shot polls. Every node in the inventory gets a single Subscribe RPC carrying the paths the opened reports need, and the browser is pushed a new table over server-sent events whenever the data actually changes.

The tables are the CLI reports, rendered by the same getters, so a column in the browser means what it means in fcli. The one CLI report that is not served is routing-pol, which is nested JSON rather than a table. bgp-rib is split into one report per route family (and per EVPN route type) so that no report needs arguments.

❯ fcli -t topo.clab.yml server
fcli server on http://127.0.0.1:8080 (6 node(s))

The global options are the same as for the CLI reports, so the server can be pointed at a containerlab topology (-t), a Nornir config (-c) and be scoped to a subset of the fabric (-i):

❯ fcli -c nornir_config.yaml -i role=leaf server --listen 0.0.0.0 --port 8080

❯ fcli -t topo.clab.yml server --help

 Usage: fcli server [OPTIONS]

 Serves live report tables over HTTP, fed by gNMI subscriptions

╭─ Options ────────────────────────────────────────────────────────────────────╮
│ --listen           -L      TEXT     Address to bind the web server to. Use   │
│                                     0.0.0.0 to expose it on all interfaces   │
│                                     [default: 127.0.0.1]                     │
│ --port             -P      INTEGER  TCP port to listen on [default: 8080]    │
│ --sample-interval  -S      INTEGER  Override the gNMI SAMPLE interval        │
│                                     (seconds) of every subscription          │
│                                     [default: None]                          │
│ --refresh          -R      FLOAT    How often (seconds) a table is           │
│                                     re-rendered and pushed to the browser    │
│                                     [default: 2.0]                           │
│ --resync                   INTEGER  Interval (seconds) for a full gNMI       │
│                                     re-read per node; 0 disables it          │
│                                     [default: 300]                           │
│ --idle-timeout             INTEGER  Stop streaming paths no report has read  │
│                                     for this long (seconds); 0 keeps every   │
│                                     path subscribed for the lifetime of the  │
│                                     server                                   │
│                                     [default: 900]                           │
│ --help                              Show this message and exit.              │
╰──────────────────────────────────────────────────────────────────────────────╯

The server binds to localhost by default. It has no authentication of its own, so put it behind a reverse proxy (or keep it on localhost) before exposing it with --listen 0.0.0.0.

In the browser

• Reports are listed in the sidebar, grouped by category, with a filter box on top. The selected report is kept in the URL fragment (http://localhost:8080/#bgp_peers), so a view can be bookmarked or shared.
• Sorting: click a column header to sort, click again to reverse. Sorting is natural, so ethernet-1/10 comes after ethernet-1/2.
• Filtering: each column has its own filter box, and the search box above the table filters on all visible columns at once. Both accept a regular expression and fall back to a substring match if the expression is not valid (yet).
• Inventory filter: the same key=value filter as the CLI's -i, applied live — e.g. role=leaf.
• Live updates: cells that changed since the previous update flash, and new rows flash as a whole. Pause freezes the table without dropping the subscriptions.
• Columns hides columns you do not need, CSV downloads exactly what the table currently shows (filters, column selection and all).

How the live data works

1. When a report is opened for the first time, the server runs its getter once against a recording proxy of the gNMI connection. That yields the exact set of paths the report reads, so the subscription paths never have to be maintained separately from the reports.
2. Each path is bootstrapped with a regular gNMI Get, which seeds a per-node state tree and pins down the response shape the report getter expects.
3. A gNMI Subscribe (STREAM/SAMPLE) then keeps that tree current. Report getters run against the tree instead of the device, so a rendered table costs no device round-trip at all. One tree per node holds every subscription, so reading it back is not simply a matter of handing over the subtree: reports overlap (/interface[name=lag*] and /interface[name=*]/statistics both live under interface), and SR Linux streams whole subtrees for a subscription on one branch of them. What a report sees is therefore narrowed back down to what its own path selects — matching key predicates, the named branch, and nothing beside it — so a report reads what its own Get would have returned rather than what its neighbours put there.
4. A path that cannot be subscribed to falls back to a short-TTL Get, and every node is re-read every --resync seconds so a missed delete cannot leave a stale row behind. Nodes are re-read round-robin rather than all at once, so a sweep spreads its Gets over the interval.

Step 2 needs data to work with: SR Linux answers a Get for a subtree that holds nothing with an empty response, which does not reveal the shape the report getter expects. Control-plane driven tables regularly start out that way — no MACs learned yet, no ES destinations, no IPv6 neighbours, or a spine that has no bridge table at all. Such a path is pending rather than broken: it is left out of the subscription and served by the short-TTL Get of step 4, so the report renders as empty instead of failing. The first of those Gets that comes back with an entry pins down the shape, and the path joins the subscription from then on — the table starts streaming by itself, within the Get TTL of the first entry appearing, with no extra round-trip spent on polling for it. GET /api/status marks these paths pending, and streaming once they are live.

The per-report SAMPLE intervals are tuned per report (5s for interface counters, 60s for system info); --sample-interval overrides them all at once. GET /api/status shows what each node is currently subscribed to.

gNMI sessions

SR Linux accepts a limited number of concurrent gRPC sessions per gRPC server — /system/grpc-server[name=mgmt]/session-limit, 20 by default — and that budget is shared with every other gRPC client of the node. Every in-flight RPC counts, including a long-running Subscribe.

The server is built to stay at one session per node: all opened reports share a single Subscribe RPC, and at most one Get is in flight per node at a time. Since gNMI cannot add paths to a running subscription, growing the path set means replacing the RPC; those restarts are batched, so opening a page full of reports costs one re-subscribe rather than one per report. Paths that no report has read for --idle-timeout are dropped again, which keeps the streaming load on the node proportional to what is actually being watched.

GET /api/status reports max_sessions_per_node, and each node's own view is available on the device with:

❯ info from state /system grpc-server mgmt client *

HTTP API

The UI is a client of a small JSON API, which is just as usable from scripts:

Both report endpoints accept inv_filter=key=value,key=value; the stream endpoint also accepts refresh=<seconds>.

❯ curl -s 'http://localhost:8080/api/report/bgp_peers?inv_filter=role%3Dleaf' | jq '.rows[0]'

MCP Server for AI Agents

nornir-srl includes a Model Context Protocol (MCP) server that exposes fcli reports as tools for AI agents (like Claude Desktop or Gemini CLI). This allows AI agents to directly query the operational state of your SR Linux fabric.

Usage

The MCP server is provided by the fcli-mcp command. It supports both stdio (default) and http (SSE) transports.

# Start with a specific containerlab topology
fcli-mcp --topo-file topo.clab.yml

# Start with a Nornir config file
fcli-mcp --config-file nornir_config.yaml

# Start as an HTTP server
fcli-mcp --transport http --port 8080

Runtime Topology Management

The MCP server can start without an initial topology, allowing you to load or switch topologies at runtime using the following MCP tools:

• list_topologies: Discovers available *.clab.yml and nornir_config.yaml files in a directory.
• load_topology: Initializes or switches the active fabric from a containerlab file.
• load_config: Initializes or switches the active fabric from a Nornir config file.
• show_topology: Displays information about the currently loaded fabric.

Configuration Examples

Claude Desktop

Add the following to your claude_desktop_config.json:

{
  "mcpServers": {
    "fcli": {
      "command": "fcli-mcp"
    }
  }
}

Gemini CLI

Add the following to your .gemini/settings.json:

{
  "mcpServers": {
    "fcli": {
      "command": "fcli-mcp"
    }
  }
}