nuvo-serial 0.6.4

Python API implementing the Nuvo Grand Concerto/Essentia G multi-zone audio amplifier serial control protocol

nuvo-serial

Python API implementing the Nuvo Grand Concerto/Essentia G multi-zone audio amplifier serial control protocol.

Notes

A Nuvo Integration built using this library, is available to control a Nuvo through a Home Assistant frontend.

Usage

Supported models: "Grand_Concerto" and "Essentia_G"

async and sync version of most commands.

Commands return instances of a python dataclass which represents the Nuvo response message type:

* ZoneStatus
* ZoneConfiguration
* ZoneVolumeConfiguration
* ZoneEQStatus
* ZoneButton
* ZoneAllOff
* SourceConfiguration
* Version

Connection

Direct serial cable or remote network connection using hardware serial-to-network adapter or software such as ser2net will work, all that is needed is a change of the port_url argument:

E.g:

Local: /dev/ttyUSB1

Remote: socket://host:port

A possible ser2net configuration connecting TCP port 10003 to the nuvo device on /dev/ttyUSB1:

10003:raw:0:/dev/ttyUSB1:57600 8DATABITS NONE 1STOPBIT

port_url="socket://192.168.5.1:10003"

Synchronous Interface

Not all the available setter methods are shown, but there are methods to configure most fields in each of the data classes.

from nuvo_serial import get_nuvo

nuvo = get_nuvo(port_url='/dev/ttyUSB0', model='Grand_Concerto')

print(nuvo.get_version()
# Version(model='Grand_Concerto', product_number='NV-I8G', firmware_version='FWv2.66', hardware_version='HWv0')

print(nuvo.zone_status(1))
# ZoneStatus(zone=1, power=True, source=1, volume=20, mute=False, dnd=False, lock=False)

print(nuvo.zone_configuration(1))
# ZoneConfiguration(zone=1, enabled=True, name='Music Room', slave_to=0, group=0, sources=['SOURCE1'], exclusive_source=False, ir_enabled=1, dnd=[], locked=False, slave_eq=0)

print(nuvo.zone_volume_configuration(1))
# ZoneVolumeConfiguration(zone=1, max_vol=33, ini_vol=20, page_vol=40, party_vol=50, vol_rst=False)

print(nuvo.zone_eq_status(1))
# ZoneEQStatus(zone=1, bass=-2, treble=0, loudcmp=True, balance_position='C', balance_value=0)

print(nuvo.source_configuration(2))
# SourceConfiguration(source=2, enabled=True, name='Sonos', gain=4, nuvonet_source=False, short_name='SON')

# Turn off zone #1
print(nuvo.set_power(1, False))
# ZoneStatus(zone=1, power=False, source=None, volume=None, mute=None, dnd=None, lock=None)

# Mute zone #1
nuvo.set_mute(1, True)
# ZoneStatus(zone=1, power=True, source=1, volume=None, mute=True, dnd=False, lock=False)

# Change Zone name
print(nuvo.zone_set_name(1, "Kitchen"))
# ZoneConfiguration(zone=1, enabled=True, name='Kitchen', slave_to=0, group=0, sources=['SOURCE1'], exclusive_source=False, ir_enabled=1, dnd=[], locked=False, slave_eq=0)

# Change Zone's permitted sources
print(nuvo.zone_set_source_mask(1, ['SOURCE3', 'SOURCE4']))
ZoneConfiguration(zone=1, enabled=True, name='Kitchen', slave_to=0, group=0, sources=['SOURCE3', 'SOURCE4'], exclusive_source=False, ir_enabled=1, dnd=[], locked=False, slave_eq=0)

# Change Zone max volume
print(nuvo.zone_volume_max(1, 20))
# ZoneVolumeConfiguration(zone=1, max_vol=20, ini_vol=20, page_vol=40, party_vol=50, vol_rst=False)

# Change Zone Bass
print(nuvo.set_bass(1, 6))
# ZoneEQStatus(zone=1, bass=6, treble=0, loudcmp=True, balance_position='C', balance_value=0)

# Set volume for zone #1
nuvo.set_volume(1, 15)

# Set source 2 for zone #1 
nuvo.set_source(1, 2)

# Set balance for zone #1
nuvo.set_balance(1, L, 8)
# ZoneEQStatus(zone=1, bass=-2, treble=0, loudcmp=True, balance_position='L', balance_value=8)

Asynchronous Interface

All the method names and syntax are as above in the sync interface, but now all the methods are coroutines and must be awaited.

An added feature with the async interface is it will constantly monitor the serial line and attempt to classify any messages emitted by the Nuvo. A subscriber to these messages in the form of a coroutine callback can optionally be added for any of the Nuvo message data classes. This allows receiving messages sent by the Nuvo in response to commands initiated from Zone keypads.

import asyncio
from nuvo_serial import get_nuvo_async

async def message_receiver(message: dict):
    print(message)
    # e.g. {'event_name': 'ZoneStatus', 'event': ZoneStatus(zone=1, power=True, source=1, volume=None, mute=True, dnd=False, lock=False)}
    # e.g. {'event_name': 'ZoneButton', 'event': ZoneButton(zone=1, source=1, button='PLAYPAUSE')}

async def main():

    nuvo = await get_nuvo_async('/dev/ttyUSB0', 'Grand_Concerto')

    print(await nuvo.zone_status(1))
    # ZoneStatus(zone=1, power=True, source=1, volume=20, mute=False, dnd=False, lock=False)
   
    """message_receiver coro will be called everytime a ZoneStatus message is received
    from the Nuvo."""
   nuvo.add_subscriber(message_receiver, "ZoneStatus")

   nuvo.add_subscriber(message_receiver, "ZoneButton")
   ...
   nuvo.remove_subscriber(message_receiver, "ZoneStatus")
   nuvo.disconnect()


loop = asyncio.get_event_loop()
loop.run_until_complete(main())