ochsner-web2com 0.1.7

Access to the ochsner web2com interface

ochsner_web2com

ochsner_web2com is a Python module that read or write paramters of a web2com interface from ochser heat pump via SOAP requests.

Example

    import ochsner_web2com.web2com as web2com
    
    ## Connect to a web2com server with default eBus and device id.
    ## Use Digest access authentication as default
    w2c = web2com.Service('192.168.188.50', 'OEM', 'password')

    ## Change the id's of ebus or device.
    w2c.set_eBus_id(1)
    w2c.set_device_id(2)

    ## get value via chain id
    result = w2c.get_value('/1/2/1/125/9')
    print(result)
    ## set value via chain id
    result = w2c.set_value('/1/2/4/99/6', 20.0)
    print(result)

    ## get value via predefined enum
    result = w2c.get(web2com.HEAT_PUMP.Thermal_energy_kWh)
    print(result)
    ## set value via predefined enum
    result = w2c.set(web2com.HEATING_CIRCUIT.Normal_setpoint_room_temperature_heating, 20.0)
    print(result)

    ## get values via list of id's (eBus and device will be added)
    result = w2c.get([1, 125, 9])
    print(result)
    ## set value via list of id's (eBus and device will be added)
    result = w2c.set([4, 99, 6], 20.0)
    print(result)

    ## Connect to a web2com server with default eBus and device id.
    ## Use Basic access authentication
    w2c_basic = Service('192.168.188.50', 'OEM', 'password', auth=AUTH.BASIC)

    ## get value via chain id
    result = w2c_basic.get_value('/1/2/1/125/9')
    print(result)

The first parameter of the result holds the HTTP result code and the second paramter the value of the paramter.

Paramter List:

Description	ID chain
heat pump: State heat generator control	/1/2/1/125/0
heat pump: Flow temperature heat generator	/1/2/1/125/1
heat pump: Return flow temperature heat generator	/1/2/1/125/2
heat pump: Heat source outlet temperature	/1/2/1/125/3
heat pump: Heat source inlet temperature	/1/2/1/125/4
heat pump: Operation cycles	/1/2/1/125/5
heat pump: Operation hours	/1/2/1/125/6
heat pump: Volume flow heat energy	/1/2/1/125/7
heat pump: Flow rate heat source	/1/2/1/125/8
heat pump: Thermal energy kWh	/1/2/1/125/9
heat pump: Thermal energy MWh	/1/2/1/125/10
heat pump: Energy DHW kWh	/1/2/1/125/11
heat pump: Energy DHW MWh	/1/2/1/125/12
auxiliary: State heat generator control	/1/2/2/126/0
auxiliary: Flow temperature heat generator	/1/2/2/126/1
auxiliary: Operation cycles	/1/2/2/126/2
auxiliary: Operation hours	/1/2/2/126/3
auxiliary: Thermal energy kWh	/1/2/2/126/4
auxiliary: Thermal energy MWh	/1/2/2/126/5
heating circuit: State heating circuit control	/1/2/4/119/0
heating circuit: Outdoor temperature	/1/2/4/119/1
heating circuit: Outdoor temperature average value	/1/2/4/119/2
heating circuit: Setpoint room temperature	/1/2/4/119/3
heating circuit: Actual heating circuit flow temperature	/1/2/4/119/4
heating circuit: Setpoint heating circuit flow temperature	/1/2/4/119/5
DHW: State DHW control	/1/2/7/121/0
DHW: Actual DHW temperature	/1/2/7/121/1
DHW: DHW setpoint	/1/2/7/121/2
Manager: Storage tank temperature top	/1/2/8/122/0
Manager: Storage tank temperature center	/1/2/8/122/1
Manager: Plant flow temperature	/1/2/8/122/2
Manager: Plant CH setpoint flow temperature	/1/2/8/122/3
Manager: Heating power in heating mode	/1/2/8/122/4
Manager: Heating power in DHW mode	/1/2/8/122/5
Manager: State heating manager	/1/2/8/122/6

Default paramter:

Description	ID
eBus	1
device	2