octowrap 0.6.0

Rewrap Python # comments to a specified line length

octowrap

Rewrap Python # comments to a line length you choose — without touching commented-out code, section dividers, TODO/FIXME markers, or tool directives.

Features

• Rewraps comment blocks to a configurable line length (default 88)
• Keeps hyphenated words intact (never breaks command-line-interface at hyphens)
• Keeps long words and URLs intact (they overflow the line length rather than being broken mid-word)
• Heals previously broken hyphenated words on rewrap (e.g. re- / validate -> re-validate)
• Heals erroneous spaces at bracket boundaries on rewrap (e.g. ( text) -> (text), text ) -> text))
• Preserves commented-out Python code (detected via 21 heuristic patterns with a prose disqualifier to avoid false positives on natural English)
• Preserves section dividers (# --------, # ========, etc.)
• Preserves section headers (# === Title ===, # --- Title ---, # ### Title ###, # *** Title ***, # ___ Title ___) — same delimiter character on both sides, three or more per side, asymmetric counts allowed
• Rewraps list items (bullets, numbered, lettered) with hanging indent aligned to the text after the marker; collects continuation lines and handles nesting naturally. Disable with list-wrap = false.
• Rewraps TODO/FIXME markers with proper continuation indent, with configurable patterns, case sensitivity, and multi-line collection
• Extracts overflowing inline comments (code # comment) into standalone block comments above the code line when the line exceeds the line length, then wraps them normally. Tool directives (# type: ignore, # noqa, etc.) are always preserved in place. Disable with --no-inline.
• Preserves tool directives (type: ignore, noqa, fmt: off, pragma: no cover, pylint: disable, noinspection, etc.)
• Supports # octowrap: off / # octowrap: on pragma comments to disable rewrapping for regions of a file
• Applies changes automatically by default, or use -i for interactive per-paragraph approval with colorized diffs and a [X/Y] progress indicator (a accept, A accept all remaining paragraphs in the file, e exclude, f flag, s skip, u undo, q quit). A single comment block that mixes prose, a TODO, and a tool directive reviews as separate diffs — one per changed paragraph — so you can see exactly what's changing. Consecutive list items group into a single prompt. Flagging wraps the paragraph with a FIXME marker and # octowrap: off / # octowrap: on pragmas so reruns skip it. Undo pops the most recent decision and re-prompts at that position; it works across files (a previously-written file is reverted on disk lazily — at quit or on the next walk-through). Quitting stops all processing, including remaining files; on quit, every file on disk is reconciled with the final decision log so undone writes are reverted.
• Reads from stdin when - is passed as the path (like black/ruff/isort)
• Auto-detects color support; respects --no-color, --color, and the NO_COLOR env var
• Atomic file writes (temp file + rename) to protect against interruptions and power loss
• Incremental adoption via --diff-only: only process comments on lines changed in git, so teams can adopt octowrap gradually without reformatting the entire codebase
• Project-level configuration via [tool.octowrap] in pyproject.toml

Development Setup

git clone https://github.com/camUrban/octowrap.git
cd octowrap
uv venv            # uses .python-version (3.13)
uv pip install -e ".[dev]"

Note: The dev environment is pinned to Python 3.13 via .python-version because docformatter's untokenize dependency doesn't build on 3.14. The runtime itself supports 3.11+.

Usage

octowrap <files_or_dirs> [--line-length 88] [--config PATH] [--stdin-filename PATH] [--dry-run] [--diff] [--check] [--no-recursive] [--no-inline] [--diff-only] [--diff-base REF] [-i] [--color | --no-color]

Stdin/stdout

Pass - as the path to read from stdin and write to stdout:

echo "# A very long comment that needs rewrapping to a shorter width." | octowrap -
cat file.py | octowrap - --diff          # show diff
cat file.py | octowrap - --check         # exit 1 if changes needed
cat file.py | octowrap - -l 79           # custom line length

Use --stdin-filename to provide the original file path for config discovery and diff labels (useful for editor integrations like VS Code and Vim that pipe buffers via stdin):

cat file.py | octowrap - --stdin-filename src/app.py --diff

Note: - cannot be mixed with other paths and is incompatible with -i (interactive mode). --stdin-filename requires -.

Example

Before:

# This is a long comment that has been written without much regard for line length and really should be wrapped to fit within a reasonable number of columns.

After (--line-length 88):

# This is a long comment that has been written without much regard for line
# length and really should be wrapped to fit within a reasonable number of
# columns.

Inline Comment Extraction

When a code line with an inline comment exceeds the line length, octowrap extracts the comment into a standalone block comment above the code:

Before:

x = some_really_long_function_call(arg1, arg2)  # This comment pushes the line way past the limit

After (--line-length 88):

# This comment pushes the line way past the limit
x = some_really_long_function_call(arg1, arg2)

Tool directives (# type: ignore, # noqa, # fmt: off, etc.) are never extracted, even when the line overflows. Disable this behavior entirely with --no-inline or inline = false in config.

TODO/FIXME Rewrapping

By default, TODO and FIXME markers are detected (case-insensitive, no colon required) and rewrapped with the marker on the first line and a one-space continuation indent on subsequent lines:

Before:

# TODO: Refactor this function to use the new async API instead of the old synchronous one, and update all callers.

After (--line-length 88):

# TODO: Refactor this function to use the new async API instead of the old
#  synchronous one, and update all callers.

Multi-line TODOs (continuation lines starting with exactly one space) are collected and rewrapped together:

# TODO: This is a long todo
#  that continues on the next line

Configure TODO handling via pyproject.toml:

[tool.octowrap]
todo-patterns = ["todo", "fixme", "hack"]    # replace default patterns
extend-todo-patterns = ["note"]              # add to effective patterns
todo-case-sensitive = true                   # match patterns literally
todo-multiline = false                       # don't collect continuations

Setting todo-patterns = [] disables TODO detection entirely, causing former TODO lines to be rewrapped as regular prose.

List Item Wrapping

Long list items are rewrapped with hanging indent aligned to the text after the marker:

Before:

# - This is a very long bullet point that exceeds the line length and should be wrapped to fit within the configured width.
# 1. This is a very long numbered item that also exceeds the line length and needs to be wrapped properly.

After (--line-length 72):

# - This is a very long bullet point that exceeds the line length and
#   should be wrapped to fit within the configured width.
# 1. This is a very long numbered item that also exceeds the line length
#    and needs to be wrapped properly.

Nesting is handled naturally — each item wraps independently at its own indent level:

# - Top-level item
#   - Nested item that is quite long and will be wrapped with its own
#     hanging indent aligned to the nested marker

Continuation lines indented to at least the marker's text column are collected and rewrapped together. Disable with list-wrap = false in pyproject.toml.

Disabling Rewrapping

Use pragma comments to protect regions of a file from rewrapping, similar to # fmt: off/on in black/ruff:

# octowrap: off
# This comment will not be rewrapped,
# no matter how long or short
# the lines are.
# octowrap: on

# This comment will be rewrapped normally.

• Directives are case-insensitive (# OCTOWRAP: OFF works)
• Must be a standalone comment line (inline x = 1 # octowrap: off is ignored)
• # octowrap: off without a matching on disables rewrapping through end of file
• Pragma lines themselves are always preserved as-is

Incremental Adoption

Use --diff-only to only process comment blocks that overlap with lines changed in git. This lets teams adopt octowrap gradually without reformatting the entire codebase in one go:

# Only rewrap comments on lines you've changed vs HEAD
octowrap --diff-only .

# Only rewrap comments changed relative to main (useful in CI)
octowrap --diff-only --diff-base main --check .

# Preview what would change
octowrap --diff-only --diff .

--diff-base REF specifies the git ref to diff against (default: HEAD). Passing --diff-base implies --diff-only.

Comment blocks are processed at the block level: if any line in a comment block overlaps with a changed line, the entire block is rewrapped. This is safe because comment blocks are syntactically independent.

Pre-commit with --diff-only

The most common use case is adding octowrap to pre-commit so it only enforces wrapping on comments you're already changing:

- repo: https://github.com/camUrban/octowrap
  rev: v0.6.0
  hooks:
    - id: octowrap
      args: [--diff-only]

Or in check-only mode (fail without modifying):

- repo: https://github.com/camUrban/octowrap
  rev: v0.6.0
  hooks:
    - id: octowrap
      args: [--diff-only, --check]

Both diff-only and diff-base can also be set in pyproject.toml:

[tool.octowrap]
diff-only = true
diff-base = "main"

Note: --diff-only requires a git repository and cannot be used with stdin mode (-).

Editor Integration

PyCharm

Settings -> Tools -> File Watchers -> Add:

• File type: Python
• Program: $ProjectFileDir$/.venv/Scripts/octowrap.exe (or .venv/bin/octowrap on Unix)
• Arguments: $FilePath$
• Output paths to refresh: $FilePath$
• Working directory: $ProjectFileDir$

Pre-commit Hook

Add octowrap to your .pre-commit-config.yaml:

- repo: https://github.com/camUrban/octowrap
  rev: v0.6.0
  hooks:
    - id: octowrap
      # args: [-l, "79"]       # custom line length
      # args: [--check]        # fail without modifying (useful for CI)
      # args: [--diff-only]    # only process comments on changed lines

Exit Codes

Code	Meaning
0	Success (no changes needed, or changes applied)
1	--check mode: files would be reformatted
2	Error processing one or more files (e.g., encoding error, permission denied)

Errors are printed to stderr. This behavior matches ruff.

GitHub Actions

Use --check in CI to fail if any comments would be rewrapped:

- name: Install octowrap
  run: pip install octowrap

- name: Check comment wrapping
  run: octowrap --check .

Incremental CI check

To only enforce wrapping on comments changed in the PR (for gradual adoption), use --diff-only --diff-base origin/main. A full git history is required so that origin/main is available for comparison:

- uses: actions/checkout@v4
  with:
    fetch-depth: 0

- name: Install octowrap
  run: pip install octowrap

- name: Check changed comments
  run: octowrap --diff-only --diff-base origin/main --check .

Configuration

Add a [tool.octowrap] section to your pyproject.toml to set project-level defaults:

[tool.octowrap]
line-length = 120
recursive = false
inline = true
exclude = ["migrations", "generated"]
extend-exclude = ["vendor"]

Key	Type	Default	CLI equivalent
line-length	int	88	--line-length
recursive	bool	true	--no-recursive
inline	bool	true	--no-inline
list-wrap	bool	true	—
diff-only	bool	false	--diff-only
diff-base	str	"HEAD"	--diff-base
exclude	list[str]	—	—
extend-exclude	list[str]	—	—
todo-patterns	list[str]	["todo", "fixme"]	—
extend-todo-patterns	list[str]	—	—
todo-case-sensitive	bool	false	—
todo-multiline	bool	true	—

CLI flags always take precedence over config values. Use --config PATH to point to a specific pyproject.toml instead of relying on auto-discovery.

exclude replaces the built-in default exclude list entirely. extend-exclude adds patterns to the defaults (or to exclude if set). Default excludes: .git, .hg, .svn, .bzr, .venv, venv, .tox, .nox, .mypy_cache, .ruff_cache, .pytest_cache, __pycache__, __pypackages__, _build, build, dist, node_modules, .eggs. Patterns are matched against individual folder or file names using fnmatch, not full paths. For example, "vendor" excludes any folder named vendor anywhere in the tree, while "docs/vendor" would never match (use "vendor" instead). Glob wildcards work: "test_*" excludes any folder starting with test_.

todo-patterns replaces the default TODO marker patterns (["todo", "fixme"]). extend-todo-patterns adds to the effective list. Both can be combined. Setting todo-patterns = [] disables TODO detection entirely.

License

MIT