Product Secondary Unit

This module lets you define one or more secondary units of measure per product (template or variant), independent of the product’s own Unit of Measure category. It solves a problem the standard multi-UoM feature cannot: relating two units that live in different UoM categories and are not a fixed physical conversion - for example selling a product by weight while also tracking it in pieces, boxes, or hours, where the exact relationship between the two can vary from one line to the next.

A secondary unit is defined by a conversion factor against the record’s own primary UoM, plus a dependency_type that controls which direction that factor is allowed to drive:

Dependent (the default): the two quantities stay in lock-step in both directions - entering one recomputes the other from the factor. Use it when the conversion is a fixed, reliable ratio, e.g. a product sold in boxes of 12 units, where the weight/quantity always equals pieces × 12.
Independent: the two quantities are completely decoupled - setting one never touches the other. Use it when the secondary quantity is informational and unrelated to the primary one, e.g. selling a service by a fixed package (primary quantity always 1) while also recording the real hours it will take to schedule an employee.
Secondary unit priority: a middle ground. The primary quantity is still estimated from the secondary one through the factor (like “Dependent”), but the secondary quantity is never recomputed back from the primary one (like “Independent”). Use it when the secondary unit is the one that must stay an exact count, while the primary quantity is only ever an estimate derived from it - the canonical example is fish sold by weight but counted in pieces: the average weight per piece is just an estimate, so the piece count must never be silently overwritten by a weight-derived guess, while the weight is still usefully pre-filled from the piece count when a line is created.

Other modules build on top of this one (via the product.secondary.unit.mixin this module provides) to carry the secondary unit and its quantity through sale, purchase and stock documents - see sale_order_secondary_unit, purchase_order_secondary_unit, stock_secondary_unit and related modules.

Table of contents

Usage

Defining a secondary unit on a product

Enable Settings > Units of Measure (this module’s field is only shown when the uom.group_uom feature is active).
Go to a product’s General Information tab. A Secondary Unit of Measure section lists any secondary units already defined for it.
Add a line: pick a Secondary Unit of Measure (a standard Odoo UoM, e.g. Units), a Secondary Unit Factor, and a dependency type. Optionally restrict the line to one specific variant instead of the whole template.
A product can have several secondary units at once (e.g. “box of 5” and “box of 10” for the same product); each other document that uses this mixin lets the user pick which one applies to a given line.

Choosing the right dependency type

Dependent - entering either quantity on a document line recomputes the other through the factor, in both directions. Good for a fixed, reliable packaging ratio (a box always has 12 units).
Independent - the two quantities never influence each other. Good for a secondary quantity that is purely informational (hours of work behind a fixed “1 package” sale).
Secondary unit priority - the secondary quantity pre-fills the primary one via the factor when a line is first created (or when the secondary quantity/unit changes), but once the primary quantity has been entered or measured on its own, editing it never overwrites the secondary quantity, and the secondary quantity is never silently recomputed from a later primary-quantity change either. Good for a count that must stay exact (pieces) alongside a primary quantity that is only ever an estimate (weight).

For module developers

To make another model participate in secondary units (compute a quantity field from a secondary_uom_id/secondary_uom_qty pair the same way this module’s own product records do), inherit product.secondary.unit.mixin and declare _secondary_unit_fields = {"qty_field": "<your quantity field>", "uom_field": "<your UoM field>"} on your model, then:

Make qty_field a stored, readonly=False compute depending on secondary_uom_id/secondary_uom_qty, whose body just calls self._compute_helper_target_field_qty().
Add an onchange on your UoM field that calls self._onchange_helper_product_uom_for_secondary(), so switching the primary UoM keeps the secondary quantity consistent for “Dependent” lines.

See purchase_order_secondary_unit (purchase-workflow) or stock_secondary_unit (stock-logistics-warehouse) for real examples, including how a dependency_type of “Independent”/”Secondary unit priority” needs extra protection at the points where the target model would otherwise recompute a quantity that must be preserved exactly (e.g. splitting a line, merging two lines, or a stored compute retriggering a sibling compute).

Tecnativa

Contributors

Carlos Dauden <carlos.dauden@tecnativa.com>
Sergio Teruel <sergio.teruel@tecnativa.com>
Kitti Upariphutthiphong <kittiu@ecosoft.co.th>
Pimolnat Suntian <pimolnats@ecosoft.co.th>
Alan Ramos <alan.ramos@jarsa.com.mx>

Maintainers

This module is maintained by the OCA.

OCA, or the Odoo Community Association, is a nonprofit organization whose mission is to support the collaborative development of Odoo features and promote its widespread use.

Current maintainer:

This module is part of the OCA/product-attribute project on GitHub.

You are welcome to contribute. To learn how please visit https://odoo-community.org/page/Contribute.

Release files for odoo-addon-product-secondary-unit 18.0.2.1.0

For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.

Built distribution (wheel)

Table of built distributions (wheels) for odoo-addon-product-secondary-unit 18.0.2.1.0
File	Interpreter	ABI	Platform	Reset
odoo_addon_product_secondary_unit-18.0.2.1.0-py3-none-any.whl 57.7 kB Sep 21, 2026	Python 3	none	any	Details

Release files / odoo_addon_product_secondary_unit-18.0.2.1.0-py3-none-any.whl

Download URL	odoo_addon_product_secondary_unit-18.0.2.1.0-py3-none-any.whl
Size	57.7 kB
Tags	Python 3
SHA-256 checksum How to use checksums	`33617fc306d1d52579211356bd0f3ade7472773b758f8d48c882ccb151703b72`
BLAKE2b-256 checksum How to use checksums	`0f67f032ea70a4ee6ec4380549740ee3415a086c36499238c5b4ee879d9ba663`
Upload date	Sep 21, 2026
Uploaded using Trusted Publishing? What is trusted publishing?	No
Uploaded via	`twine/7.0.0 CPython/3.14.4`