omni-pca 2026.5.14

Async Python client for HAI/Leviton Omni-Link II home automation panels (Omni Pro II, Omni IIe, Omni LTe, Lumina).

omni-pca

Async Python client for HAI/Leviton Omni-Link II home automation panels — Omni Pro II, Omni IIe, Omni LTe, Lumina.

Includes a Home Assistant custom component (custom_components/omni_pca/).

Project home: https://github.com/rsp2k/omni-pca Documentation: https://hai-omni-pro-ii.warehack.ing/

Status

Alpha. Built from a full reverse-engineering of HAI's PC Access 3.17 (the Windows installer/programmer app). The protocol layer captures two non-public quirks that public Omni-Link clients miss:

1. Session key is not the ControllerKey. Last 5 bytes are XORed with a controller-supplied SessionID nonce.
2. Per-block XOR pre-whitening before AES. First two bytes of every 16-byte block are XORed with the packet's sequence number.

The full byte-level protocol spec lives at https://hai-omni-pro-ii.warehack.ing/reference/protocol/.

Install

pip install omni-pca

# Or with uv
uv add omni-pca

For Home Assistant users, install the integration through HACS — see the HA install how-to.

Quick start (library)

import asyncio
from omni_pca import OmniClient

async def main():
    async with OmniClient(
        host="192.168.1.9",
        port=4369,
        controller_key=bytes.fromhex("6ba7b4e9b4656de3cd7edd4c650cdb09"),
    ) as panel:
        info = await panel.get_system_information()
        print(info.model_name, info.firmware_version)

asyncio.run(main())

For the panel walkthrough — connect, list zones, react to push events — see the tutorial.

Two wire dialects — TCP/v2 vs UDP/v1

The Omni network module is configurable at the panel keypad to listen on TCP, UDP, or both. Each transport speaks a different wire dialect — OmniClient above handles the TCP path (OmniLink2, the modern wire format used by PC Access ≥ 3); panels configured UDP-only fall back to the legacy v1 protocol with typed RequestZoneStatus / RequestUnitStatus opcodes, no RequestProperties, and streaming name downloads. For those, use OmniClientV1 from the omni_pca.v1 subpackage:

from omni_pca.v1 import OmniClientV1

async with OmniClientV1(
    host="192.168.1.9",
    controller_key=bytes.fromhex("..."),
) as panel:
    info = await panel.get_system_information()      # same dataclass as v2
    names = await panel.list_all_names()             # streaming UploadNames
    zones = await panel.get_zone_status(1, 16)       # typed status by range
    await panel.execute_security_command(area=1, mode=SecurityMode.AWAY, code=1234)

The HA integration picks the right client automatically based on the Transport dropdown in the config flow (TCP vs UDP). See zone & unit numbering for why v1 panels need the long-form RequestUnitStatus for unit indices > 255.

Quick start (Home Assistant)

# Manual install — works on every HA flavour
cd /path/to/your/homeassistant/config/
mkdir -p custom_components
cd custom_components
git clone https://github.com/rsp2k/omni-pca tmp-omni
cp -r tmp-omni/custom_components/omni_pca .
rm -rf tmp-omni

Restart HA, then add the integration via Settings → Devices & Services. You'll need:

• Panel IP / hostname
• TCP port (default 4369)
• ControllerKey as 32 hex chars

Get the ControllerKey from your .pca file using the bundled CLI:

omni-pca decode-pca '/path/to/Your.pca' --field controller_key

The integration creates one HA device per panel plus typed entities for every named object on the controller: alarm_control_panel for areas, light for units, binary_sensor + switch for zones (state + bypass), climate for thermostats, sensor for analog zones and panel telemetry, button for panel macros, and event for the typed push-notification stream. See custom_components/omni_pca/README.md for the full entity + service catalog, or the HA install how-to for the step-by-step.

Without a panel — mock controller

The library ships a stateful MockPanel that emulates the controller side of the protocol over real TCP. Useful for offline development, integration tests, and demos:

from omni_pca.mock_panel import MockPanel

async with MockPanel(controller_key=...).serve(port=14369):
    # Connect a real OmniClient to localhost:14369 — full handshake + AES
    ...

The local dev stack (dev/docker-compose.yml) packages a real Home Assistant container and the mock panel side-by-side so you can click through the integration without touching real hardware. See the dev-stack tutorial.

Tests

uv sync --group ha
uv run pytest -q

351 tests across the protocol primitives, the mock panel, the OmniClient ↔ MockPanel end-to-end roundtrip, and an in-process Home Assistant harness driving the integration via the real config flow + service calls.

Versioning

Date-based (CalVer): YYYY.M.D. Bumped on backwards-incompatible changes. See CHANGELOG.md.

License

MIT. See LICENSE.

Acknowledgments

This client is independent and not affiliated with Leviton or HAI. Protocol details derived from clean-room analysis of the publicly-distributed PC Access installer. The reverse-engineering arc is documented at https://hai-omni-pro-ii.warehack.ing/journey/.