---

OpenRazer is the free Razer driver for Linux: a kernel module that speaks Razer's vendor USB protocol, plus a D-Bus daemon on top of it. Neither half runs on Windows.

This is a full port. The protocol layer moves into user space on top of the Windows HID class driver, D-Bus is replaced by a loopback JSON-RPC daemon, and every device quirk is transpiled directly from the upstream C sources — so all 267 devices OpenRazer knows about behave the same way here as they do on Linux, plus one Bluetooth headset upstream cannot reach at all.

$ openrazer-win list
Razer BlackWidow Chroma  keyboard   PM1523E01801234     v1.10
Razer Viper              mouse      PM1948H09500666     v1.3

$ openrazer-win effect breath_dual "#ff0080" --colour2 cyan
Razer BlackWidow Chroma: breath_dual on backlight

$ openrazer-win dpi 3200
Razer Viper: dpi (3200, 3200)

Why this exists

	Synapse	openrazer-win
Account required	Yes	No
Runs in the background	~200 MB, several services	~25 MB, one process you start
Telemetry	Yes	None — no network access at all
Scriptable	No	CLI + Python API + JSON-RPC
Works offline / on a locked-down machine	Partially	Fully
Source available	No	GPL-2.0-or-later

Install

pip install openrazer-win

There is no dependency list to speak of — the port runs on the Python standard library alone. No compiler, no hidapi wheel, no driver signing, no administrator rights, no reboot.

One optional extra exists, for Bluetooth-only devices such as the Kraken Kitty V2 BT:

pip install "openrazer-win[ble]"

That pulls in PyWinRT, because Windows exposes Bluetooth LE through WinRT. Everything on the USB side keeps working without it.

Prefer a single file? Grab openrazer-win.exe from the latest release and run it directly; it needs no Python at all.

Close Razer Synapse before using this. Synapse holds the device open and will fight you for control of the LEDs. openrazer-win doctor tells you if that is happening.

Quick start

Command line

openrazer-win daemon start          # start the background service
openrazer-win list                  # what is plugged in
openrazer-win info                  # everything about it

openrazer-win effect static red
openrazer-win effect spectrum
openrazer-win effect wave --direction 2
openrazer-win effect breath_dual "#ff0080" --colour2 "#00ffff"
openrazer-win effect ripple green   # host-rendered, follows your typing

openrazer-win zones                  # list a device's zones
openrazer-win zones red blue        # one colour each: left ear red, right ear blue

openrazer-win profile save night    # remember what is showing now
openrazer-win profile               # list saved profiles
openrazer-win profile load night    # put it back

openrazer-win brightness 60
openrazer-win dpi 1800
openrazer-win poll-rate 1000
openrazer-win battery

Every command takes --device (serial, product id or a fragment of the name), --zone (backlight, logo, scroll, left, right, …) and --json.

To have the daemon come up with Windows:

openrazer-win autostart enable      # per-user, no admin rights
openrazer-win autostart status
openrazer-win autostart disable

This writes one entry under HKCU\...\CurrentVersion\Run, so it also appears in Task Manager's Startup tab and can be removed from there.

Python

The API mirrors upstream's openrazer.client, so scripts written for Linux usually port by changing one import:

from openrazer_win.client import DeviceManager

for device in DeviceManager().devices:
    print(device.name, device.serial, device.firmware_version)

    device.fx.static(0, 255, 0)
    device.brightness = 75

    if device.has('dpi'):
        device.dpi = (1800, 1800)

Per-key lighting works the same way as upstream's fx.advanced:

keyboard = DeviceManager().by_name('BlackWidow')[0]
matrix = keyboard.fx.advanced
for row in range(matrix.rows):
    for column in range(matrix.columns):
        matrix[row, column] = (255, 0, 128)
matrix.draw()

Zones can be painted individually, and a device that can take them all in one message does so, so the two never disagree even for an instant:

headset = DeviceManager().by_name('Kraken Kitty V2 BT')[0]
headset.colour_zones()                          # ['left', 'right']
headset.set_colour_zones([(255, 0, 0), (0, 0, 255)])
headset.fx_for('left').static(0, 255, 0)        # or one ear at a time

Profiles are named snapshots of a device's lighting, kept on the PC — up to ten per device, in %LOCALAPPDATA%\openrazer-win\profiles.json:

device.save_profile('night')
device.profiles                     # [{'name': 'night', 'saved': ..., 'zones': [...]}]
device.load_profile('night')

No daemon running? Pass direct=True and the library opens the HID handles itself:

DeviceManager(direct=True)

Graphical control panel

openrazer-win-gui

A small Tk window — device list, zone and effect pickers, colour swatches, brightness, DPI and polling rate. Tk ships with Python on Windows, so this needs no extra install either.

How it works

The Linux stack is a kernel module plus a D-Bus daemon. Neither is available on Windows, so each layer has a direct replacement:

                Linux                                   Windows
    ┌────────────────────────────┐        ┌────────────────────────────────┐
    │ openrazer.client (D-Bus)   │        │ openrazer_win.client (JSON-RPC)│
    ├────────────────────────────┤        ├────────────────────────────────┤
    │ openrazer-daemon           │        │ openrazer_win.daemon           │
    │   D-Bus session bus        │        │   loopback TCP + bearer token  │
    ├────────────────────────────┤        ├────────────────────────────────┤
    │ razer*.ko  (kernel module) │        │ openrazer_win.devices          │
    │   sysfs attributes         │        │   recipes transpiled from the  │
    │   usb_control_msg()        │        │   same C sources               │
    ├────────────────────────────┤        ├────────────────────────────────┤
    │ usbhid / usbcore           │        │ hid.dll + setupapi.dll (ctypes)│
    └────────────────────────────┘        └────────────────────────────────┘

The protocol. Every Razer peripheral speaks the same vendor protocol: a fixed 90-byte structure delivered as HID feature report 0x00, with an XOR checksum over bytes 2–87. openrazer_win/protocol/ is a line-by-line port of razercommon.c and razerchromacommon.c.

Reaching the device. The kernel driver sends usb_control_msg to a specific USB interface. Windows exposes each interface as its own HID collection, so the port opens the one whose path carries the matching &mi_XX and whose report descriptor declares a 90-byte feature report. When Windows denies read/write access to a keyboard or mouse collection, the port falls back to a zero-access handle — feature-report IOCTLs are FILE_ANY_ACCESS, so they still work.

The device quirks — the interesting part. OpenRazer's drivers encode ~20 000 lines of per-device behaviour as switch (device->usb_pid) statements: which report builder to call, which LED id, which transaction id. Hand-porting that would be a guaranteed source of drift.

Instead, tools/transpile_recipes.py parses the C, folds each switch against every known product id, and emits a small program per (attribute, device):

[{"op": "build", "fn": "razer_chroma_extended_matrix_effect_static",
  "args": [{"k": "const", "value": 1}, {"k": "var", "name": "led_id"},
           {"k": "rgb", "offset": 0}]},
 {"op": "txid", "value": {"k": "const", "value": 63}},
 {"op": "send"}]

565 distinct recipes cover all 267 devices. openrazer_win/devices/recipes.py interprets them at runtime. Tracking a new upstream release means re-running the transpiler, not rewriting Python.

The device database comes from the same place: tools/extract_device_db.py imports upstream's openrazer_daemon.hardware package with the Linux-only dependencies stubbed out, and dumps every device class to JSON — names, matrix dimensions, DPI limits, and the exact method list each device advertises. Capability reporting intersects that list with the recipe table, so a mouse never claims to have a backlight it does not have.

What is supported

Category	Devices
Mice	113
Keyboards & laptops	112
Accessories (docks, stands, ARGB controllers)	17
Headsets (Kraken protocol)	8
Headsets (Bluetooth LE)	1
Mousepads	8
Keypads	7
eGPU enclosures	2
Total	268

166 have addressable matrices; 76 report battery level. The full searchable list is on the documentation site, or run openrazer-win supported.

Profiles: up to ten named lighting snapshots per device, saved on the PC and re-applied on demand — openrazer-win profile save night, profile load night.

Features: all hardware effects (static, spectrum, wave, wheel, reactive, blinking, breathing ×3, starlight ×3), per-key custom frames, per-zone brightness, DPI and DPI stages, polling rate up to 8000 Hz, battery level and charging state, idle timeout, low-battery threshold, game mode, macro LED, scroll mode and acceleration, keyboard layout, addressable-RGB channels, a host-rendered ripple effect driven by a low-level keyboard hook, and autostart at logon.

Bluetooth

One device in the range has no USB data mode at all: the Kraken Kitty V2 BT. Plugging it in charges it and nothing more, so upstream has no driver for it — there is no USB device for a kernel module to bind to.

Its lighting protocol was recovered for this port by capturing what Razer Synapse sends over the air. It turns out to be a vendor GATT service whose UUID spells Amel-RazerBLE, driven by write commands of the form c4 00 06 followed by one RGB triple per ear, left first. Setting pure red, green and blue in Synapse produced exactly those bytes, and a control capture with Synapse closed produced no writes at all. See openrazer_win/protocol/razer_ble.py.

The device itself only knows a static colour per zone. Synapse's breathing, spectrum and audio-reactive modes are drawn by the host, one frame at a time — which is why closing Synapse stops the traffic dead — so this port renders them the same way, through its own effect engine: effect spectrum and effect wave fall back to the frame-by-frame renderer on any device whose firmware has no such mode, and say so when they do.

Brightness, battery level and charging state work over Bluetooth too: the vendor service answers requests on a notify characteristic, since nothing in it can be read directly. Brightness the device does keep across a power cycle — unlike the colour.

The headset does not store the colour you set. It shows what it was last told for as long as the Bluetooth link is up, and reverts to the colour saved in it — whatever Synapse last wrote — the moment that link goes. So a colour set here is held: re-asserted every couple of seconds for as long as the daemon runs, which is the same thing Synapse does. A command that writes the stored colour does exist — this headset shipped showing white and has shown Razer green ever since Synapse first set it up — but it appeared in none of the traffic captured here, which points at the one-off setup Synapse performs on install. It is not implemented and not guessed at: the device answers an unknown opcode with silence rather than an error, so guessing would be blind, on the channel where firmware pushes live. Profiles are the practical answer instead.

Three facts about the link, all confirmed on the hardware, decide how it is managed. Resolving the characteristic costs about 90 ms, most of that service discovery, which no amount of frame streaming survives — held open, a write costs about 1 ms. A connected BLE device stops advertising altogether, so discovery keeps a device it is connected to even when a sweep hears nothing, and a link with nothing left to hold is given up after five seconds so the device becomes visible again. One consequence worth knowing: while the daemon is holding a device, a --direct client will not find it, because there is no advertisement to find.

Devices are found by listening for advertisements rather than by pairing: a dual-mode headset need not use its classic Bluetooth address on the LE side (this one advertises one byte away from it), and Windows creates no device node for an unpaired LE connection. Because a sweep takes a few seconds, the radio is swept far less often than the USB bus, and a missed advertisement is not treated as an unplugged device.

The Kraken headsets are covered too, through their own protocol: rather than the 90-byte control report, they expose the lighting controller's RAM, so colours are written to fixed addresses and a one-byte selector picks the effect. Reading state back from a Kraken is not supported -- the kernel collects that from unsolicited HID input reports -- so the daemon serves those values from its persistence file, as upstream's daemon does for devices that cannot report.

Not ported: macro recording and playback, which upstream implements on Linux input events.

Troubleshooting

Start with:

openrazer-win doctor

It lists every Razer HID collection Windows can see, marks the control interface, and says whether each product id is in the database.

Symptom	Cause
no Razer control interface	Synapse is running, or another program holds the device. Close it.
Device listed as NOT IN DATABASE	Newer than the bundled data. Open an issue with the product id.
device replied not supported	The firmware refused that command; the device genuinely lacks the feature.
Effects reset after sleep	Windows cuts USB power. The daemon replays the stored state when the device reappears.
Device is connected but nothing is listed	It may be on a charge-only cable, or be a Bluetooth-only model. doctor names what Windows sees it as, and says which of the two it is.
A Bluetooth device is powered on but not listed	Install the extra: pip install "openrazer-win[ble]". doctor ends with a Bluetooth section that says whether support is present and what the radio can hear.
Nothing at all listed	Only Razer devices (vendor 1532) are handled.

Development

git clone https://github.com/Ar4ikov/openrazer-win
cd openrazer-win
pip install -e ".[dev]"

pytest                              # 315 tests, no hardware needed
ruff check .
python tools/simulate_devices.py    # every capability of all 267 devices

The test suite runs against a built-in device emulator that validates CRCs and answers the protocol, so the whole stack — transport, recipes, daemon, client, CLI — is exercised without plugging anything in. --emulate does the same for the daemon:

openrazer-win-daemon --emulate

Re-syncing with upstream

git clone --depth 1 https://github.com/openrazer/openrazer /tmp/openrazer
python tools/extract_device_db.py  /tmp/openrazer openrazer_win/devices/data/devices.json
python tools/transpile_recipes.py  /tmp/openrazer openrazer_win/devices/data/recipes.json
pytest && python tools/simulate_devices.py

New devices and changed quirks are picked up automatically.

Credits

All protocol knowledge here is OpenRazer's work — years of reverse engineering by Terri Cain, Tim Theede and a long list of contributors. This project adds a Windows transport and a translation layer; it does not add a single byte of new protocol research.

Licensed GPL-2.0-or-later, the same as upstream, because the device database and the transpiled recipes are derived from OpenRazer's GPL sources.

Not affiliated with or endorsed by Razer Inc. Razer, Chroma and Synapse are trademarks of Razer Inc.